23 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "Composites"  
Results: 1 - 23
open access

Effect of Retting on Surface Chemistry and Mechanical Performance Interactions in Natural Fibers for High Performance Polymer Composites

Description: Sustainability through replacement of non-renewable fibers with renewable fibers is an ecological need. Impact of transportation costs from South-east Asia on the life cycle analysis of the composite is detrimental. Kenaf is an easily grown crop in America. Farm based processing involves placing the harvested crop in rivers and ponds, where retting of the fibers from the plant (separation into fibers) can take 2 weeks or more. The objective of this thesis is to analyze industrially viable proce… more
Date: May 2013
Creator: Ramesh, Dinesh
Partner: UNT Libraries

Mechanical Properties of Polymer Modified Mortar

Description: The mechanical properties of the polymer-modified mortar are markedly improved over conventional cement mortar. We utilized recycled ABS in powder form and a polymer latex emulsion, polymer percentage ranges from 0 to 25 percent by polymer/cement ratio were investigated. The mechanical properties investigated were compression strength and adhesion strength. Compression strength effects did not have an impact on adhesion strength. Adhesion strength was calculated with pullout testing apparatus … more
Access: Restricted to UNT Community Members. Login required if off-campus.
Date: August 2002
Creator: Palos, Artemio
Partner: UNT Libraries
open access

Bulk and Interfacial Effects on Density in Polymer Nanocomposites

Description: The barrier properties of polymers are a significant factor in determining the shelf or device lifetime in polymer packaging. Nanocomposites developed from the dispersion of nanometer thick platelets into a host polymer matrix have shown much promise. The magnitude of the benefit on permeability has been different depending on the polymer investigated or the degree of dispersion of the platelet in the polymer. In this dissertation, the effect of density changes in the bulk and at the polymer-pl… more
Date: May 2007
Creator: Sahu, Laxmi Kumari
Partner: UNT Libraries
open access

Tribological Behavior of Spark Plasma Sintered Tic/graphite/nickel Composites and Cobalt Alloys

Description: Monolithic composites are needed that combine low friction and wear, high mechanical hardness, and high fracture toughness. Thin films and coatings are often unable to meet this engineering challenge as they can delaminate and fracture during operation ceasing to provide beneficial properties during service life. Two material systems were synthesized by spark plasma sintering (SPS) and were studied for their ability to meet these criteria. A dual hybrid composite was fabricated and consisted of… more
Date: December 2013
Creator: Kinkenon, Douglas
Partner: UNT Libraries
open access

Processing and Characterization of Nickel-Carbon Base Metal Matrix Composites

Description: Carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs) are attractive reinforcements for lightweight and high strength metal matrix composites due to their excellent mechanical and physical properties. The present work is an attempt towards investigating the effect of CNT and GNP reinforcements on the mechanical properties of nickel matrix composites. The CNT/Ni (dry milled) nanocomposites exhibiting a tensile yield strength of 350 MPa (about two times that of SPS processed monolithic nickel… more
Date: May 2014
Creator: Borkar, Tushar Murlidhar
Partner: UNT Libraries
open access

Electrodeposited Metal Matrix Composites for Enhanced Corrosion Protection and Mechanical Properties

Description: In the oil and gas industry, high corrosion resistance and hardness are needed to extend the lifetime of the coatings due to exposure to high stress and salt environments. Electrodeposition has become a favorable technique in synthesizing coatings because of low cost, convenience, and the ability to work at low temperatures. Electrodeposition of metal matrix composites has become popular for enhanced corrosion resistance and hardness in the oil and gas industry because of the major problems tha… more
Date: May 2016
Creator: Thurber, Casey Ray
Partner: UNT Libraries
open access

Investigation of the Effect of Particle Size and Particle Loading on Thermal Conductivity and Dielectric Strength of Thermoset Polymers

Description: Semiconductor die attach materials for high voltage, high reliability analog devices require high thermal conductivity and retention of dielectric strength. A comparative study of effective thermal conductivity and dielectric strength of selected thermoset/ceramic composites was conducted to determine the effect of ceramic particle size and ceramic particle loading on thermoset polymers. The polymer chosen for this study is bismaleimide, a common aerospace material chosen for its strength and t… more
Date: May 2016
Creator: Warner, Nathaniel A.
Partner: UNT Libraries
open access

Development of a Natural Fiber Mat Plywood Composite

Description: Natural fibers like kenaf, hemp, flax and sisal fiber are becoming alternatives to conventional petroleum fibers for many applications. One such applications is the use of Non-woven bio-fiber mats in the automobile and construction industries. Non-woven hemp fiber mats were used to manufacture plywood in order to optimize the plywood structure. Hemp fiber mats possess strong mechanical properties that comparable to synthetic fibers which include tensile strength and tensile modulus. This study … more
Date: August 2017
Creator: Anthireddy, Prasanna Kumar
Partner: UNT Libraries
open access

Diffusion Kinetics and Microstructure of Eutectic and Composite Solder/Copper Joints

Description: Sn/Pb solders are widely used by the electronics industry to provide both mechanical and electrical interconnections between electronic components and printed circuit boards. Solders with enhanced mechanical properties are required for high reliability for Surface Mount Technology (SMT) applications. One approach to improve the mechanical properties of solder is to add metallic or intermetallic particles to eutectic 63Sn/37Pb solder to form composite solders. Cu6Sn5 and Cu3Sn form and grow at t… more
Date: May 1994
Creator: Wu, Yujing
Partner: UNT Libraries
open access

Saturation and foaming of thermoplastic nanocomposites using supercritical CO2.

Description: Polystyrene (PS) nanocomposite foams were prepared using supercritical fluid (SCF) CO2 as a solvent and blowing agent. PS was first in-situ polymerized with a range of concentrations of montmorillonite layered silicate (MLS). The polymerized samples were then compression molded into 1 to 2mm thick laminates. The laminates were foamed in a batch supercritical CO2 process at various temperatures and pressures from 60°-85°C and 7.6-12MPa. The resulting foams were analyzed by scanning electron micr… more
Date: May 2005
Creator: Strauss, William C.
Partner: UNT Libraries

Barrier and Long Term Creep Properties of Polymer Nanocomposites.

Description: The barrier properties and long term strength retention of polymers are of significant importance in a number of applications. Enhanced lifetime food packaging, substrates for OLED based flexible displays and long duration scientific balloons are among them. Higher material requirements in these applications drive the need for an accurate measurement system. Therefore, a new system was engineered with enhanced sensitivity and accuracy. Permeability of polymers is affected by permeant solubility… more
Access: Restricted to the UNT Community Members at a UNT Libraries Location.
Date: December 2004
Creator: Ranade, Ajit
Partner: UNT Libraries
open access

Aliens and atheists: The Plurality of Worlds and Natural Theology in Seventeenth-Century England.

Description: The plurality of worlds has had a long history in England, which has not gone unnoticed by scholars. Historians have tended to view this English pluralist tradition as similar to those found on the continent, and in doing so have failed to fully understand the religious significance that the plurality of worlds had on English thought and society. This religious significance is discovered through a thorough investigation of plurality as presented by English natural philosophers and theologians, … more
Date: December 2007
Creator: Oliver, Ryan
Partner: UNT Libraries
open access

Micro and nano composites composed of a polymer matrix and a metal disperse phase.

Description: Low density polyethylene (LDPE) and Hytrel (a thermoplastic elastomer) were used as polymeric matrices in polymer + metal composites. The concentration of micrometric (Al, Ag and Ni) as well as nanometric particles (Al and Ag) was varied from 0 to 10 %. Composites were prepared by blending followed by injection molding. The resulting samples were analyzed by scanning electron microscopy (SEM) and focused ion beam (FIB) in order to determine their microstructure. Certain mechanical properties of… more
Date: December 2007
Creator: Olea Mejia, Oscar Fernando
Partner: UNT Libraries
open access

Formal Concerns in Conceptual Sculpture

Description: The problem I choose dealt with a new material to use in conceptual art. Since the nature of my work deals with ribbed sculptural forms that explore conceptual abstractions of recorded observations, I investigated a new material called composites. A composite is defined as two or more materials that are combined to share the best qualities of both. Laminated foam core, nylon fabric weave, vinyl, and resin composites may introduce an aesthetic and structural advantage to traditional material suc… more
Date: May 2001
Creator: Stromberg, Matthew Gray
Partner: UNT Libraries
open access

Characterization of Post-Plasma Etch Residues and Plasma Induced Damage Evaluation on Patterned Porous Low-K Dielectrics Using MIR-IR Spectroscopy

Description: As the miniaturization of functional devices in integrated circuit (IC) continues to scale down to sub-nanometer size, the process complexity increases and makes materials characterization difficult. One of our research effort demonstrates the development and application of novel Multiple Internal Reflection Infrared Spectroscopy (MIR-IR) as a sensitive (sub-5 nm) metrology tool to provide precise chemical bonding information that can effectively guide through the development of more efficient … more
Date: May 2016
Creator: Rimal, Sirish
Partner: UNT Libraries
open access

The Microbial Retting Environment of Hibiscus Cannabinus and Its Implications in Broader Applications

Description: Fiber-yielding plants is an area of increased interest due to the potential use in a variety of green-based materials. These biocomposites can be incorporated into multiple uses; for example, to replace building materials and interior vehicular paneling. The research here aims to focus in on the crop Hibiscus cannabinus for utilization into these functions. H. cannabinus is economically attractive due to the entire process being able to be accomplished here in the United States. The plant can b… more
Date: May 2015
Creator: Visi, David K.
Partner: UNT Libraries
open access

Processing, structure property relationships in polymer layer double hydroxide multifunctional nanocomposites

Description: Dan Beaty (1937-2002) was a prolific composer, pianist, researcher, educator, and writer. His large compositional output included chamber works, choral works, songs, orchestral pieces, electronic music, and keyboard works. Beaty was well versed in traditional Western music as well as the more avant-garde and perplexing idioms of the twentieth century. Beaty's compositions reflect the many fascinating, if not always popular, musical trends of his time. His music encompasses styles from serial … more
Date: August 2009
Creator: Ogbomo, Sunny Minister
Partner: UNT Libraries
open access

Structure property and deformation analysis of polypropylene montmorillonite nanocomposites.

Description: Nanocomposites with expandable smectites such as montmorillonite layered silicates (MLS) in polymer matrices have attracted extensive application interest. Numerous MLS concentrations have been used with no particular justification. Here, we investigate the effects of MLS dispersion within the matrix and on mechanical performance. The latter is resolved through a three-prong investigation on rate dependent tensile results, time dependent creep results and the influence of a sharp notch in polyp… more
Date: May 2003
Creator: Hernandez-Luna, Alejandro
Partner: UNT Libraries
open access

Electrochemical synthesis of CeO2 and CeO2/montmorillonite nanocomposites.

Description: Nanocrystalline cerium oxide thin films on metal and semiconductor substrates have been fabricated with a novel electrodeposition approach - anodic oxidation. X-ray diffraction analysis indicated that as-produced cerium oxide films are characteristic face-centered cubic fluorite structure with 5 ~ 20 nm crystal sizes. X-ray photoelectron spectroscopy study probes the non-stoichiometry property of as-produced films. Raman spectroscopy and Scanning Electron Microscopy have been applied to analyze… more
Date: December 2003
Creator: Wang, Qi
Partner: UNT Libraries
open access

Thermoplastic and Thermoset Natural Fiber Composite and Sandwich Performance

Description: The objective of this thesis is to investigate the effects of adding natural fiber (kenaf fiber, retted kenaf fiber, and sugarcane fiber) into polymer materials. The effects are obtained by considering three main parts. 1. Performance in thermoplastic composites. The effect of fiber retting on polymer composite crystallization and mechanical performance was investigated. PHBV/PBAT in 80/20 blend ratio was modified using 5% by weight kenaf fiber. Dynamic mechanical analysis of the composites was… more
Date: May 2014
Creator: Yang, Bing
Partner: UNT Libraries
open access

Processing-Structure Relationships of Reactive Spark Plasma Sintered Diamond Composites

Description: Traditional lightweight armor ceramics such as boron carbide (B4C) and silicon carbide (SiC) are used alone or together in varying amounts to create monolithic protective plates. These materials exhibit relatively small differences in hardness, flexure strength, and fracture toughness. Many of the routes taken during the synthesis of the powder and sintering of the plates using traditional ceramic processing techniques have long processing times, tend to leave asperities within the microstruc… more
Date: August 2022
Creator: Garcia, Christian
Partner: UNT Libraries
open access

Electrochemical Deposition of Nickel Nanocomposites in Acidic Solution for Increased Corrosion Resistance

Description: The optimal conditions for deposition of nickel coating and Ni-layered double hydroxide metal matrix composite coatings onto stainless steel discs in a modified all-sulfate solutions have been examined. Nickel films provide good general corrosion resistance and mechanical properties as a protective layer on many metallic substrates. In recent years, there has been interest in incorporation nano-dimensional ceramic materials, such as montemorillonite, into the metal matrices to improve upon the… more
Date: August 2017
Creator: Daugherty, Ryan E.
Partner: UNT Libraries
open access

Room and Elevated Temperature Sliding Wear Behavior of Cold Sprayed Ni-WC Composite Coatings

Description: The tribological properties of cold sprayed Ni-WC metal matrix composite (MMC) coatings were investigated under dry sliding conditions from room temperature (RT) up to 400°C, and during thermal cycling to explore their temperature adaptive friction and wear behavior. Characterization of worn surfaces was conducted using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy to determine the chemical and microstructural evolution during friction testing.… more
Date: August 2018
Creator: Torgerson, Tyler B.
Partner: UNT Libraries
Back to Top of Screen