48 Matching Results

Search Results

Advanced search parameters have been applied.

Study of the properties of mine waste in the midwestern coal fields. Phase I report

Description: In an effort to assist the coal industry in complying with the applicable regulations, to design safe and environmentally acceptable disposal systems, and to encourage secondary use of coal mine waste, the US Department of Energy has initiated research programs to develop coal mine waste disposal and use technology. This study of the properties of mine wastes in the Midwestern coal fields has been limited to the waste materials obtained from underground coal mines and preparation plants attached to both underground and surface mines. The program has been divided into two phases. In Phase I, the 20 most important properties relevant to safe disposal, reclamation, underground disposal, and secondary uses have been identified. An inventory of the significant waste disposal sites in the Midwestern coal fields has been prepared. The site locations have been plotted on USGS maps. Estimates of coal production and coal mine waste production during the next 2 decades have been prepared and are presented in this report. Also, all available information obtained from a search of existing literature on physical and chemical properties, including analysis results of the general runoff from the refuse disposal areas, has been collected and is presented. In order to fill the gaps in information, 20 sites have been identified for drilling and sampling to determine the various physical and chemical properties. They have been selected on the basis of the distribution and quantity of waste at the existing locations (both abandoned and active), the future trends in production and likely locations of waste disposal areas, their geographical and geological distribution, and ease of accessibility for drilling and sampling.
Date: July 4, 1980
Partner: UNT Libraries Government Documents Department

Feasibility study for anaerobic digestion of agricultural crop residues. Dynatech report No. 1935

Description: The objective of this study was to provide cost estimates for the pretreatment/digestion of crop residues to fuel gas. A review of agricultural statistics indicated that the crop residues wheat straw, corn stover, and rice straw are available in sufficient quantity to provide meaningful supplies of gas. Engineering economic analyses were performed for digestion of wheat straw, corn stover, and rice straw for small farm-, cooperative-, and industrial scales. The small farm scale processed the residue from an average size US farm (400 acres), and the other sizes were two and three orders of magnitude greater. The results of the analyses indicate that the production of fuel gas from these residues is, at best, economically marginal, unless a credit can be obtained for digester effluent. The use of pretreatment can double the fuel gas output but will not be economically justifiable unless low chemical requirements or low cost chemicals can be utilized. Additional development is necessary in this area. Use of low cost hole-in-the-ground batch digestion results in improved economics for the small farm size digestion system, but not for the cooperative and industrial size systems. Recommendations arising from this study are continued development of autohydrolysis and chemical pretreatment of agricultural crop residues to improve fuel gas yields in an economically feasible manner; development of a low cost controlled landfill batch digestion process for small farm applications; and determination of crop residue digestion by-product values for fertilizer and refeed.
Date: July 31, 1979
Creator: Ashare, E.; Buivid, M. G. & Wilson, E. H.
Partner: UNT Libraries Government Documents Department

Review and problem definition of water/rock reactions associated with injection of spent geothermal fluids from a geothermal plant into aquifers

Description: Among the technical problems faced by the burgeoning geothermal industry is the disposal of spent fluids from power plants. Except in unusual circumstances the normal practice, especially in the USA, is to pump these spent fluids into injection wells to prevent contamination of surface waters, and possibly in some cases, to reduce pressure drawdown in the producing aquifers. This report is a survey of experience in geothermal injection, emphasizing geochemical problems, and a discussion of approaches to their possible mitigation. The extraction of enthalpy from geothermal fluid in power plants may cause solutions to be strongly supersaturated in various dissolved components such as silica, carbonates, sulfates, and sulfides. Injection of such supersaturated solutions into disposal wells has the potential to cause scaling in the well bores and plugging of the aquifers, leading to loss of injectivity. Various aspects of the geochemistry of geothermal brines and their potential for mineral formation are discussed, drawing upon a literature survey. Experience of brine treatment and handling, and the economics of mineral extraction are also addressed in this report. Finally suggestions are made on future needs for possible experimental, field and theoretical studies to avoid or control mineral scaling.
Date: July 1, 1986
Creator: Elders, W.A.
Partner: UNT Libraries Government Documents Department

Advanced product recovery: Direct catalytic reduction of sulfur dioxide to elemental sulfur. Third quarterly technical progress report

Description: More than 170 wet scrubber systems applied to 72,000 MW of US, coal-fired, utility boilers are in operation or under construction. In these systems, the sulfur dioxide removed form the boiler flue gas is permanently bound to a sorbent material, such as lime or limestone. The sulfated sorbent must be disposed of as a waste product or, in some cases, sold as a byproduct (e.g. gypsum). The use of regenerable sorbent technologies has the potential to reduce or eliminate solid waste production, transportation and disposal. Arthur D. Little, Inc., together with its industry and commercialization advisor, Engelhard Corporation, and its university partner, Tufts, plans to develop and scale-up an advanced, byproduct recovery technology that is a direct, catalytic process for reducing sulfur dioxide to elemental sulfur. The principal objective of the Phase 1 program is to identify and evaluate the performance of a catalyst which is robust and flexible with regard to choice of reducing gas. In order to achieve this goal, they have planned a structured program including: market/process/cost/evaluation; lab-scale catalyst preparation/optimization studies; lab-scale, bulk/supported catalyst kinetic studies; bench-scale catalyst/process studies; and utility review. This catalytic process reduces SO{sub 2} over a fluorite-type oxide (such as ceria and zirconia). The catalytic activity can be significantly promoted by active transition metals, such as copper. This type of mixed metal oxide catalyst has stable activity, high selectivity for sulfur production, and is resistant to water and carbon dioxide poisoning.
Date: July 1, 1996
Partner: UNT Libraries Government Documents Department

Low temperature thermal energy storage: a state-of-the-art survey

Description: The preliminary version of an analysis of activities in research, development, and demonstration of low temperature thermal energy storage (TES) technologies having applications in renewable energy systems is presented. Three major categories of thermal storage devices are considered: sensible heat; phase change materials (PCM); and reversible thermochemical reactions. Both short-term and annual thermal energy storage technologies based on prinicples of sensible heat are discussed. Storage media considered are water, earth, and rocks. Annual storage technologies include solar ponds, aquifers, and large tanks or beds of water, earth, or rocks. PCM storage devices considered employ salt hydrates and organic compounds. The sole application of reversible chemical reactions outlined is for the chemical heat pump. All program processes from basic research through commercialization efforts are investigated. Nongovernment-funded industrial programs and foreign efforts are outlined as well. Data describing low temperature TES activities are presented also as project descriptions. Projects for all these programs are grouped into seven categories: short-term sensible heat storage; annual sensible heat storage; PCM storage; heat transfer and exchange; industrial waste heat recovery and storage; reversible chemical reaction storage; and models, economic analyses, and support studies. Summary information about yearly funding and brief descriptions of project goals and accomplishments are included.
Date: July 1, 1979
Creator: Baylin, F.
Partner: UNT Libraries Government Documents Department

Fossil Energy Program progress report for May 1979

Description: This report - the fifty eighth of a series - is a compendium of monthly progress reports for the ORNL research and development programs that are in support of the increased utilization of coal and other fossil fuel alternatives to oil and gas as sources of clean energy. The projects reported this month include those for coal conversion development, materials engineering, a coal equipment test program, an atmospheric fluid bed combustor for cogeneration, engineering studies and technical support, process and program analysis, environmental assessment studies, magnetic beneficiation of dry pulverized coal, technical support to the TVA fluid bed combustion program, coal cogeneration/district heating plant assessment, and chemical research and development.
Date: July 1, 1979
Partner: UNT Libraries Government Documents Department

Management of dry flue gas desulfurization by-products in underground mines. The development and testing of collapsible intermodal containers for the handling and transport of coal combustion residues

Description: SEEC, Incorporated, is developing a collapsible intermodal container (CIC{trademark}) designed for containment and transport of fly ash and other dry-flowable bulk commodities. The CIC is specially configured to ride in open top rail cars, but as an intermodal container, it also rides in barges and on flat bed trailers. This allows SEEC to use unit coal train back haul capacity to transport fly ash to markets at and near coal mines. SEEC`s goals for this project were to design a CIC for handling and transporting dry fly ash, and then demonstrate the CIC technology. During this project, SEEC has performed extensive initial design work, leading to the manufacture of three prototype CICs for demonstration. Preliminary tests to examine safety issues included finite element analyses and an overload test in which the CIC was lifted while carrying weight in excess of its rated capacity. In both cases, the CIC met all safety requirements. With the above information satisfying possible safety concerns in hand, SEEC worked with SIU and other cooperators to plan and carry out field demonstration and testing of three CICs. This demonstration/testing including filling the CICs with fly ash, transporting them in a coal hopper car, handling with standard intermodal equipment, and emptying by inverting (two CICs) and by vacuuming (one CIC). Results were very positive. Filling with fly ash, transporting, and intermodal handling went very well, as did emptying by vacuum. Emptying by inverting was less successful, but most of the problems were predicted ahead of time, and were mostly due to lack of fly ash fluidizing equipment as much as anything. Throughout the testing, valuable information was gathered that will greatly accelerate refinement of both the CIC and the system of CIC handling.
Date: July 1, 1995
Creator: Carpenter, J.L. & Thomasson, E.M.
Partner: UNT Libraries Government Documents Department

Brayton-cycle heat-recovery-system characterization program. Gas-conditioning final evaluation report

Description: Flue gas conditioning approaches for the Brayton-cycle heat recovery system are discussed. This revision incorporates the results of recent AiResearch tests on the subatmospheric system (SAS) turbocompressor, as well as the Electric Power Research Institute sponsored tests on ceramic fiber filters. The two primary purposes of the gas conditioning evaluation are: to determine the need for protecting the Brayton-cycle turbocompressor and heat exchanger from the potential damaging effects of erosion and deposition, and to determine what type of approach should be used for cleanup, if protection by flue gas conditioning is required.
Date: July 31, 1981
Partner: UNT Libraries Government Documents Department

Development of an energy consumption and cost data base for fuel cell total energy systems and conventional building energy systems

Description: This report describes the procedures and data sources used to develop an energy-consumption and system-cost data base for use in predicting the market penetration of phosphoric acid fuel cell total-energy systems in the nonindustrial building market. A computer program was used to simulate the hourly energy requirements of six types of buildings - office buildings, retail stores, hotels and motels, schools, hospitals, and multifamily residences. The simulations were done by using hourly weather tapes for one city in each of the ten Department of Energy administrative regions. Two types of building construction were considered, one for existing buildings and one for new buildings. A fuel cell system combined with electrically driven heat pumps and one combined with a gas boiler and an electrically driven chiller were compared with similar conventional systems. The methods of system simulation, component sizing, and system cost estimation are described for each system. The systems were simulated for a single building size for each building type. Methods were developed to extrapolate the system cost and performance data to other building sizes.
Date: July 1, 1980
Creator: Pine, G.D.; Christian, J.E.; Mixon, W.R. & Jackson, W.L.
Partner: UNT Libraries Government Documents Department

Grid-Connected Integrated Community Energy System: Final Report, Volume 2

Description: A preliminary feasibility analysis of a grid-connected ICES in the City of Independence, Missouri, is presented. It is found that the ICES concept can be made feasible in Independence by employing a 20-MW coal-fired boiler and turbine and using waste heat to provide the energy for heating and cooling commercial facilities with over 3 million square feet of floor space. When fully loaded thermally, the ICES results in favorable fuel utilization and energy conservation in comparison to conventional energy systems. The City of Independence is experienced with all of the institutional factors that may impact the ICES Demonstration Project.
Date: July 1, 1977
Partner: UNT Libraries Government Documents Department

Potential energy savings from aquifer thermal energy storage

Description: Pacific Northwest Laboratory researchers developed an aggregate-level model to estimate the short- and long-term potential energy savings from using aquifer thermal storage (ATES) in the United States. The objectives of this effort were to (1) develop a basis from which to recommend whether heat or chill ATES should receive future research focus and (2) determine which market sector (residential, commercial, or industrial) offers the largest potential energy savings from ATES. Information was collected on the proportion of US land area suitable for ATES applications. The economic feasibility of ATES applications was then evaluated. The potential energy savings from ATES applications was calculated. Characteristic energy use in the residential, commercial, and industrial sectors was examined, as was the relationship between waste heat production and consumption by industrial end-users. These analyses provided the basis for two main conclusions: heat ATES applications offer higher potential for energy savings than do chill ATES applications; and the industrial sector can achieve the highest potential energy savings for the large consumption markets. Based on these findings, it is recommended that future ATES research and development efforts be directed toward heat ATES applications in the industrial sector. 11 refs., 6 figs., 9 tabs.
Date: July 1, 1988
Creator: Anderson, M.R. & Weijo, R.O.
Partner: UNT Libraries Government Documents Department

Thermal Energy Storage Evaluation Program: 1986 annual report. [Economic planning, technical assessment, field tests]

Description: The Thermal Energy Storage Evaluation Program activities were initiated to provide economic planning, technical assessment and field testing support for the thermal energy storage program, as well as management of the overall program for the DOE. Economic planning included two assessment studies. In technical assessment, issues that might affect an assessment were outlined for the development of a standard methodology to conduct assessments; work is underway to establish ''market-based'' cost and performance goals for cool storage technologies in residential applications; planning has begun for investigation of benefits in incorporating aquifer thermal energy storage with heat pumps; and plans are being formulated to evaluate the potential benefit of using aquifer thermal energy storage to augment power plant cooling. Field testing to develop technologies for the recovery and reuse of industrial waste heat began with the instrumentation design for the ceramic/salt matrix in an operating brick-making plant. Work in advanced studies by Lawrence Berkeley Laboratory continued on thermochemical conversion and storage using small particles as the heat exchanger catalyst. In SO/sub 3/ dissociation experiments at 645/sup 0/C using light and dark conditions, results clearly demonstrated the benefit in directly radiantly heating the catalyst to accomplish the endothermic step of a thermochemical storage reaction.
Date: July 1, 1987
Creator: Drost, M.K.; Bates, J.M.; Brown, D.R. & Weijo, R.O.
Partner: UNT Libraries Government Documents Department

Survey of industrial coal conversion equipment capabilities: heat recovery and utilization. [53 references]

Description: A scoping survey of the capabilities of industrial heat recovery equipment was conducted to determine their adaptability to proposed coal-conversion complexes. Major categories of heat exchangers included shell-and-tube, periodic-flow and rotary regenerators, heat pipe arrays, direct phase contactors, and steam and organic Rankine cycles for power generation from waste heat. Primary applications encompassed feed-effluent and other process stream interchangers, combustion air preheaters, and heat recovery steam generators (waste heat boiler-superheaters). It is concluded that the single area providing the greatest potential for extending US industrial heat-recovery equipment capabilities as related to coal-conversion processes is a research, development, and testing program to acquire more physical-property and heat-transfer data and more-reliable design correlations.
Date: July 1, 1978
Creator: Gambill, W. R. & Reed, W. R.
Partner: UNT Libraries Government Documents Department

PURPA Resource Development in the Pacific Northwest : Case Studies of Ten Electricity Generating Powerplants.

Description: The case studies in this document describe the Public Utilities, Regulatory Policies Act (PURPA) development process for a variety of generating technologies. Developer interactions with regulatory agencies and power purchasers are described in some detail. Equipment, installation, and maintenance costs are identified; power marketing considerations are taken into account; and potential environmental impacts, with corresponding mitigation approaches and practices are summarized. The project development case studies were prepared by the energy agencies of the four Northwest states, under contract to the Bonneville Power Administration.
Date: July 1990
Creator: Washington State Energy Office
Partner: UNT Libraries Government Documents Department

Production of degradable polymers from food-waste streams

Description: In the United States, billions of pounds of cheese whey permeate and approximately 10 billion pounds of potatoes processed each year are typically discarded or sold as cattle feed at $3{endash}6/ton; moreover, the transportation required for these means of disposal can be expensive. As a potential solution to this economic and environmental problem, Argonne National Laboratory is developing technology that: Biologically converts existing food-processing waste streams into lactic acid and uses lactic acid for making environmentally safe, degradable polylactic acid (PLA) and modified PLA plastics and coatings. An Argonne process for biologically converting high-carbohydrate food waste will not only help to solve a waste problem for the food industry, but will also save energy and be economically attractive. Although the initial substrate for Argonne`s process development is potato by-product, the process can be adapted to convert other food wastes, as well as corn starch, to lactic acid. Proprietary technology for biologically converting greater than 90% of the starch in potato wastes to glucose has been developed. Glucose and other products of starch hydrolysis are subsequently fermented by bacteria that produce lactic acid. The lactic acid is recovered, concentrated, and further purified to a polymer-grade product.
Date: July 1, 1992
Creator: Tsai, S. P.: Coleman, R. D.; Bonsignore, P. V. & Moon, S. H.
Partner: UNT Libraries Government Documents Department

Base program on energy related research. Quarterly technical progress report, November 1993--January 1994

Description: This report consists of brief reports on a number of processes involving: gas injection in oil wells; coalbed methane recovery simulation; a portable data acquisition system; development of a premium fuel from western coal; optimization of recycle oil process for eastern oil shales; solid waste management and waste product utilization; mercury recovery from coal; remedial action taken with contaminated soils; and heavy oil/plastics co-processing.
Date: July 1, 1994
Partner: UNT Libraries Government Documents Department


Description: Over the past year, KeySpan Energy sponsored a research program at Brookhaven National Laboratory (BNL) aimed at recycling boiler ash (BA) and waste water treatment sludge (WWTS) byproducts generated from Keyspan's power stations into potentially useful materials, and at reducing concurrent costs for their disposal. Also, KeySpan has an interest in developing strategies to explicitly integrate industrial ecology and green chemistry. From our collaborative efforts with Keyspan (Diane Blankenhom Project Manager, and Kenneth Yager), we succeeded in recycling them into two viable products; Pb-exchange adsorbents (PEAs), and high-performance cements (HpCs). These products were made from chemically bonded cement and ceramic (CBC) materials that were synthesized through two-step chemical reaction pathways, acid-base and hydration. Using this synthesis technology, both the WWTS and BA served in acting as solid base reactants, and sodium polyphosphate, [-(-NaPO{sub 3}-)-{sub n}], known as an intermediator of fertilizer, was employed as the acid solution reactant. In addition, two commercial cement additives, Secar No. 51 calcium aluminate cement (CAC) and Type I calcium silicate cement (CSC), were used to improve mechanical behavior and to promote the rate of acid-base reaction of the CBC materials.
Date: July 31, 2001
Creator: SUGAMA,T.
Partner: UNT Libraries Government Documents Department

Implementing PURPA : Renewable Resource Development in the Pacific Northwest : Executive Summary.

Description: The Public Utilities Regulatory Policies Act (PURPA) of 1979 requires that electrical utilities interconnect with qualifying facilities (QFs) and purchase electricity at a rate based upon their full avoided cost of providing both capacity and energy. Facilities that qualify for PURPA benefits include solar or geothermal electric units, hydropower, municipal solid waste or biomass-fired power plants, and cogeneration projects that satisfy maximum size, fuel use, ownership, location, and/or efficiency criteria. The mandate of PURPA, coupled with the electrical energy deficits projected to occur in the Pacific Northwest by the mid 1980s, led to resurgence of interest in the development of small, decentralized, non-utility owned and operated generating stations. A variety of would-be developers conducted feasibility studies and initiated environmental permitting and power marketing discussions with appropriate authorities. While many proposed PURPA projects fill by the wayside, others were successfully brought on-line. A variety of public and private sector developers, including cities, counties, irrigation districts, utilities, ranchers, timber companies, and food processing plants, successfully negotiated PURPA-based, or share-the-savings'' power purchase contracts. Other developers run their meter backwards'' or provide energy to their local utilities at the same rate that would otherwise be paid to Bonneville. This document provides a summary resource development of these renewable projects in the Pacific Northwest.
Date: July 1, 1990
Creator: Office., Washington State Energy
Partner: UNT Libraries Government Documents Department

Catalyzed Electrolytic Plutonium Oxide Dissolution (CEPOD): The past seventeen years and future potential

Description: Catalyzed Electrolytic Plutonium Oxide Dissolution (CEPOD) was first demonstrated at PNL in early 1974 in work funded by EXXON Corporation. That work was aimed at dissolution of Pu-containing residues remaining in mixed-oxide reactor fuels dissolution and was first publicly disclosed in 1981. The process dissolves PuO{sub 2} in an anolyte containing small (catalytic) amounts of elements that form kinetically fast, strongly oxidizing ions. These are continuously regenerated at the anode. Catalysts used, in their oxidized form, include Ag{sup 2+}, Ce{sup 4+}, Co{sup 3+}, and AmO{sub 2}{sup 2+}. This paper reviews the chemistry involved in CEPOD and the results of its application to the dissolution of the Pu content of a variety of PuO{sub 2}-containing materials such as off-standard oxide, fuels dissolution residues, incinerator ash, contaminated soils, and other scrapes or wastes. Results are presented for both laboratory-scale and plant-scale dissolvers. Spin-off applications such as decontamination of metallic surfaces and destruction of organics are discussed. 27 refs., 14 figs.
Date: July 1, 1990
Creator: Ryan, J.L.; Bray, L.A.; Wheelwright, E.J. & Bryan, G.H.
Partner: UNT Libraries Government Documents Department

Infrastructure for thulium-170 isotope power systems for autonomous underwater vehicle fleets

Description: The radioisotope thulium-170 is a safe and environmentally benign heat source for providing the high endurance and energy densities needed by advanced power systems for autonomous underwater vehicles (AUV). Thulium Isotope Power (TIP) systems have an endurance of {approximately}3000 h, and gravimetric and volumetric energy densities of 3 {times} 10{sup 4} Wh/kg and 3 {times} 10{sup 8} Wh/m{sup 3}, respectively. These energy densities are more than 200 times higher than those currently provided by Ag-Zn battery technology. In order to capitalize on these performance levels with about one hundred AUVs in continuous use, it will be necessary to establish an infrastructure for isotope production and heat-source refurbishment. The infrastructure cost is not trivial, and studies are needed to determine its optimum configuration. The major component of the projected infrastructure is the nuclear reactor used to produce Tm- 170 by neutron absorption in Tm-169. The reactor design should ideally be optimized for TM-170 production. Using the byproduct waste'' heat beneficially would help defray the cost of isotope production. However, generating electric power with the reactor would compromise both the cost of electricity and the isotope production capacity. A coastal location for the reactor would be most convenient from end-use considerations, and the waste'' heat could be used to desalinate seawater in water-thirsty states. 13 refs., 6 figs., 2 tabs.
Date: July 1, 1991
Creator: Walter, C.E.
Partner: UNT Libraries Government Documents Department

Use of Produced Water in Recirculating Cooling Systems at Power Generating Facilities

Description: The purpose of this study is to evaluate produced water as a supplemental source of water for the San Juan Generating Station (SJGS). This study incorporates elements that identify produced water volume and quality, infrastructure to deliver it to SJGS, treatment requirements to use it at the plant, delivery and treatment economics, etc. SJGS, which is operated by Public Service of New Mexico (PNM) is located about 15 miles northwest of Farmington, New Mexico. It has four units with a total generating capacity of about 1,800 MW. The plant uses 22,400 acre-feet of water per year from the San Juan River with most of its demand resulting from cooling tower make-up. The plant is a zero liquid discharge facility and, as such, is well practiced in efficient water use and reuse. For the past few years, New Mexico has been suffering from a severe drought. Climate researchers are predicting the return of very dry weather over the next 30 to 40 years. Concern over the drought has spurred interest in evaluating the use of otherwise unusable saline waters. This deliverable describes possible test configurations for produced water demonstration projects at SJGS. The ability to host demonstration projects would enable the testing and advancement of promising produced water treatment technologies. Testing is described for two scenarios: Scenario 1--PNM builds a produced water treatment system at SJGS and incorporates planned and future demonstration projects into the design of the system. Scenario 2--PNM forestalls or decides not to install a produced water treatment system and would either conduct limited testing at SJGS (produced water would have to be delivered by tanker trucked) or at a salt water disposal facility (SWD). Each scenario would accommodate demonstration projects differently and these differences are discussed in this deliverable. PNM will host a demonstration test of water-conserving ...
Date: July 1, 2005
Creator: Zammit, Kent & DiFilippo, Michael N.
Partner: UNT Libraries Government Documents Department

Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash

Description: This quarterly report covers the period from April 1st, 2003 through June 30th, 2003. It covers; technical development, permitting status, engineering status, construction status, operations summary and marketing support activities for this period.
Date: July 1, 2003
Creator: Scandrol, Roy
Partner: UNT Libraries Government Documents Department

Utilization of coal associated minerals. Quarterly report No. 10, January 1-March 31, 1980

Description: In the preceding quarterly report, it was reported that while sampling the Solvent Refined Coal II (SRC II) pilot plant at Fort Lewis, Washington, the plant went down and vacuum bottoms waste material representing the minerals flow at the last steady state condition were obtained. This plant has been sampled again and samples of the incoming feed coal, sized coal and vacuum bottoms waste material were obtained. As part of our effort to trace the same mineral suite through mining, preparation and conversion, new samples of feed coal, cleaned coal and refuse were obtained from the District 4 commercial preparation plant. This preparation plant supplies coal to the SRC II pilot plant at Fort Lewis, Washington. A study of the thermal insulating properties of fired flyash based structural materials was completed and is included.
Date: July 15, 1980
Creator: Slonaker, J. F.; Buttermore, W. H.; Carlisle, J. A.; Durham, D. L.; Muter, R. B. & Alderman, J. K.
Partner: UNT Libraries Government Documents Department


Description: Pending EPA regulations may mandate 70 to 90% mercury removal efficiency from utility flue gas. A mercury control option is the trapping of oxidized mercury in wet flue gas desulfurization systems (FGD). The potential doubling of mercury in the FGD material and its effect on mercury volatility at temperatures common to wallboard manufacture is a concern that could limit the growing byproduct use of FGD material. Prediction of mercury fate is limited by lack of information on the mercury form in the FGD material. The parts per billion mercury concentrations prevent the identification of mercury compounds by common analytical methods. A sensitive analytical method, cold vapor atomic fluorescence, coupled with leaching and thermodecomposition methods were evaluated for their potential to identify mercury compounds in FGD material. The results of the study suggest that the mercury form is dominated by the calcium sulfate matrix and is probably associated with the sulfate form in the FGD material. Additionally, to determine the effect of high mercury concentration FGD material on wallboard manufacture, a laboratory FGD unit was built to trap the oxidized mercury generated in a simulated flue gas. Although the laboratory prepared FGD material did not contain the mercury concentrations anticipated, further thermal tests determined that mercury begins to evolve from FGD material at 380 to 390 F, consequently dropping the drying temperature should mitigate mercury evolution if necessary. Mercury evolution is also diminished as the weight of the wallboard sample increased. Consequently, mercury evolution may not be a significant problem in wallboard manufacture.
Date: July 1, 2004
Creator: Meischen, Sandra
Partner: UNT Libraries Government Documents Department