67 Matching Results

Search Results

Results: 1 - 24 next
open access

Aerodynamic Characteristics of Airfoils 4: Continuation of Reports Nos. 93, 124, and 182

Description: This collection of data on airfoils has been made from the published reports of a number of the leading Aerodynamic Laboratories of this country and Europe. The information which was originally expressed according to the different customs of the several laboratories is here presented in a uniform series of charts and tables suitable for the use of designing engineers and for purposes of general reference. The authority for the results here presented is given as the name of the laboratory at whi… more
Date: September 1926
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Air-Consumption Parameters for Automatic Mixture Control of Aircraft Engines

Description: From Introduction: "The purpose of this analysis was to investigate the use of a function of intake-manifold pressure, exhaust back pressure, intake manifold temperature, and engine speed in place of a venturi as a means of measuring engine air consumption and to determine if this function is suitable for automatic mixture control."
Date: September 1, 1944
Creator: Shames, Sidney J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An Analysis of Supersonic Aerodynamic Heating With Continuous Fluid Injection

Description: From Introduction: "The aerodynamic heating problem assumes considerable importance at high-supersonic speeds. Sanger and Bredt (reference 1) have calculated the high-speed aerodynamic forces and equilibrium surface temperature at extremely high altitudes where the molecular mean free path is large (free-molecule-flow region) compared with a characteristic body dimension. The theoretical investigation of Lees (reference 2) on the stability of the laminar boundary layer in compressible flow ind… more
Date: September 29, 1949
Creator: Klunker, E. B. & Ivey, H. Reese
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Attainable Circulation About Airfoils in Cascade

Description: "From consideration of available information on boundary-layer behavior, a relation among profile thickness, maximum surface velocity, Reynolds number, velocity diagram, and solidity is established for a cascade of airfoils immersed in a two-dimensional incompressible fluid flow. Several cascades are computed to show the effect of various cascade design parameters on minimum required cascade solidity. Comparisons with experimentally determined blade performance show that the derived blade loadi… more
Date: September 1949
Creator: Goldstein, Arthur W. & Mager, Artur
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Average Properties of Compressible Laminar Boundary Layer on Flat Plate With Unsteady Flight Velocity

Description: The time-average characteristics of boundary layers over a flat plate in nearly quasi-steady flow are determined. The plate may be either insulated or isothermal. The time averages are found without specifying the plate velocity explicitly except that it is positive and has an average value.
Date: September 5, 1956
Creator: Moore, Franklin K. & Ostrach, Simon
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Bending and shear stresses developed by the instantaneous arrest of the root of a moving cantilever beam

Description: A theoretical and experimental investigation has been made of the behavior of a cantilever beam in transverse motion when its root is suddenly brought to rest. Equations are given for determining the stresses, the deflections, and the accelerations that arise in the beam as a result of the impact. The theoretical equations, which have been confirmed experimentally, reveal that, at a given percentage of the distance from root to tip, the bending stresses for a particular mode are independent of … more
Date: September 27, 1944
Creator: Stowell, Elbridge Z.; Schwartz, Edward B. & Houbolt, John C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Calculations on the forces and moments for an oscillating wing-aileron combination in two-dimensional potential flow at sonic speed

Description: From Summary: "The linearized theory for compressible unsteady flow is used, as suggested in recent contributions to the subject, to obtain the velocity potential and the lift and moment for a thin harmonically oscillating, two-dimensional wing-aileron combination moving at sonic speed. The velocity potential is derived by considering the sonic case as the limit of the linearized supersonic theory. From the velocity potential explicit expressions for the lift and moment are developed for vertic… more
Date: September 4, 1951
Creator: Nelson, Herbert C. & Berman, Julian H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Coefficients of discharge of fuel-injection nozzles for compression-ignition engines

Description: "This report presents the results of an investigation to determine the coefficients of discharge of nozzles with small, round orifices of the size used with high-speed compression-ignition engines. The injection pressures and chamber back pressures employed were comparable to those existing in compression-ignition engines during injection. The construction of the nozzles was varied to determine the effect of the nozzle design on the coefficient. Tests were also made with nozzles assembled in an… more
Date: September 11, 1930
Creator: Gelalles, A. G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Column Strength of Tubes Elastically Restrained Against Rotation at the Ends

Description: Report presents the results of a study made of the effects of known end restraint on commercially available round and streamline tubing of chromium-molybdenum steel, duralumin, stainless steel, and heat-treated chromium-molybdenum steel; and a more accurate method than any previously available, but still a practical method, was developed for designing compression members in riveted or welded structures, particularly aircraft. Two hundred specimens were tested as short, medium-length, and long c… more
Date: September 9, 1937
Creator: Osgood, William R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Column Strength of Two Extruded Aluminum-Alloy H-Sections

Description: "Extruded aluminum-alloy members of various cross sections are used in aircraft as compression members either singly or as stiffeners for aluminum-alloy sheet. In order to design such members, it is necessary to know their column strength or, in the case of stiffeners, the value of the double modulus, which is best obtained for practical purposes from column tests. Column tests made on two extruded h-sections are described, and column formulas and formulas for the ratio of the double modulus to… more
Date: September 30, 1938
Creator: Osgood, William R. & Holt, Marshall
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A comparison of theory and experiment for high-speed free-molecule flow

Description: A comparison is made of free-molecule-flow theory with the results of wind-tunnel tests performed to determine the drag and temperature-rise characteristics of a transverse circular cylinder. The measured values of the cylinder center-point temperature confirmed the salient point of the heat-transfer analysis which was the prediction that an insulated cylinder would attain a temperature higher than the stagnation temperature of the stream. Good agreement was obtained between the theoretical and… more
Date: September 12, 1950
Creator: Stalder, Jackson R.; Goodwin, Glen & Creager, Marcus O.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Convection of a pattern of vorticity through a shock wave

Description: An arbitrary weak spatial distribution of vorticity can be represented in terms of plane sinusoidal shear waves of all orientations and wave lengths (Fourier integral). The analysis treats the passage of a single representative weak shear wave through a plane shock and shows refraction and modification of the shear wave with simultaneous generation of an acoustically intense sound wave. Applications to turbulence and to noise in supersonic wind tunnels are indicated.
Date: September 26, 1952
Creator: Ribner, H. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Dislocation Theory of the Fatigue of Metals

Description: "A dislocation theory of fatigue failure for annealed solid solutions is presented. On the basis of this theory, an equation giving the dependence of the number of cycles for failure on the stress, the temperature, the material parameters, and the frequency is derived for uniformly stressed specimens. The equation is in quantitative agreement with the data" (p. 183).
Date: September 12, 1947
Creator: Machlin, E. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The drag of two streamline bodies as affected by protuberances and appendages

Description: This report presents the results of wind tunnel tests of two airship models conducted to determine the drag coefficients at zero pitch, and the effect of fins and cars and of flat and streamlined protuberances located at various positions along the hull. During the investigation the stern of one model was rounded off to produce a blunter shape. The extreme range of the Reynolds number based on the over-all length of the models was from 1,300,000 to 33,000,000. At large values of the Reynolds nu… more
Date: September 26, 1932
Creator: Abbott, Ira H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The dynamic-response characteristics of a 35 degree swept-wing airplane as determined from flight measurements

Description: From Summary: "The longitudinal and lateral-directional dynamic-response characteristics of a 35 degree swept-wing fighter-type airplane determined from flight measurements are presented and compared with predictions based on theoretical studies and wind-tunnel data. Flights were made at an altitude of 35,000 feet covering the Mach number range of 0.50 to 1.04. A limited amount of lateral-directional data were also obtained at 10,000 feet. The flight consisted essentially of recording transient… more
Date: September 17, 1952
Creator: Triplett, William C.; Brown, Stuart C. & Smith, G. Allan
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The effect of baffles on the temperature distribution and heat-transfer coefficients of finned cylinders

Description: This report presents the results of an investigation to determine the effect of baffles on the temperature distribution and the heat-transfer coefficient of finned cylinders. The tests were conducted in a 30-inch wind tunnel on electrically heated cylinders with fins of 0.25 and 0.31 inch pitch. The results of these tests showed that the use of integral baffles gave a reduction of 31.9 percent in the rear wall temperatures and an increase of 54.2 percent in the heat transfer coefficient as comp… more
Date: September 26, 1934
Creator: Schey, Oscar W. & Rollin, Vern G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Equations and Charts for the Rapid Estimation of Hinge-Moment and Effectiveness Parameters for Trailing-Edge Controls Having Leading and Trailing Edges Swept Ahead of the Mach Lines

Description: "Existing conical-flow solutions have been used to calculate the hinge-moments and effectiveness parameters of trailing-edge controls having leading and trailing edges swept ahead of the Mach lines and having streamwise root and tip chords. Equations and detailed charts are presented for the rapid estimation of these parameters. Also included is an approximate method by which these parameters may be corrected for airfoil-section thickness" (p. 937).
Date: September 8, 1950
Creator: Goin, Kennith L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Flame Speeds and Energy Considerations for Explosions in a Spherical Bomb

Description: "Simultaneous measurements were made of the speed of flame and the rise in pressure during explosions of mixtures of carbon monoxide, normal heptane, iso-octane, and benzene in a 10-inch spherical bomb with central ignition. From these records, fundamental properties of the explosive mixtures, which are independent of the apparatus, were computed. The transformation velocity, or speed at which flame advances into and transforms the explosive mixture, increases with both the temperature and the … more
Date: September 28, 1939
Creator: Fiock, Ernest F.; Marvin, Charles F., Jr.; Caldwell, Frank R. & Roeder, Carl H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Flight Determination of Drag of Normal-Shock Nose Inlets With Various Cowling Profiles at Mach Numbers From 0.9 to 1.5

Description: External-drag data are presented for normal-shock nose inlets with NACA 1-series, parabolic, and conic cowling profiles. The tests were made at an angle of attack of 0 degrees by using rocket-propelled models in free flight at Mach numbers from 0.9 to 1.5. The Reynolds number based on body maximum diameter varied from 2.5 x 10 sup 6 to 5.5 x 10 sup 6.
Date: September 8, 1953
Creator: Sears, R. I.; Merlet, C. F. & Putland, L. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A flight evaluation of the longitudinal stability characteristics associated with the pitch-up of a swept-wing airplane in maneuvering flight at transonic speeds

Description: This report presents the results of flight measurements of longitudinal stability and control characteristics made on a swept-wing jet aircraft to determine the origin of the pitch-up encountered in maneuvering flight at transonic speeds. For this purpose measurements were made of elevator angle, tail angle of attack, and wing-fuselage pitching moments (obtained from measurements of the balancing tail loads).
Date: September 12, 1951
Creator: Anderson, Seth B. & Bray, Richard S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Flow of a Compressible Fluid Past a Curved Surface

Description: "An iteration method is employed to obtain the flow of a compressible fluid past a curved surface. The first approximation which leads to the Prandtl-Glauert rule, is based on the assumption that the flow differs but little from a pure translation. The iteration process then consists in improving this first approximation in order that it will apply to a flow differing from pure translatory motion to a greater degree. The method fails when the Mach number of the undisturbed stream reaches unity … more
Date: September 13, 1943
Creator: Kaplan, Carl
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Further Studies of Flame Movement and Pressure Development in an Engine Cylinder

Description: This report describes an investigation using a stroboscopic apparatus for observing flame movement through a large number of small windows distributed over the head of a spark-ignition engine in following flame spread with combustion chambers of different shapes at two engine speed and for a variety of spark-plug locations including single and twin ignition. The principal factors influencing flame movement in the engine are discussed, and the lack of reliable information regarding their separat… more
Date: September 1935
Creator: Marvin, Charles F., Jr.; Wharton, Armistead & Roeder, Carl H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A General Small-Deflection Theory for Flat Sandwich Plates

Description: "A small-deflection theory is developed for the elastic behavior of orthotropic flat plates in which deflections due to shear are taken into account. In this theory, which covers all types of flat sandwich construction, a plate is characterized by seven physical constants (five stiffnesses and two Poisson ratios) of which six are independent. Both the energy expression and the differential equations are developed. Boundary conditions corresponding to simply supported, clamped, and elastically r… more
Date: September 30, 1947
Creator: Libove, Charles & Batdorf, S. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Impingement of Cloud Droplets on a Cylinder and Procedure for Measuring Liquid-Water Content and Droplet Sizes in Supercooled Clouds by Rotating Multicylinder Method

Description: "Evaluation of the rotating multicylinder method for the measurement of droplet-size distribution, volume-median droplet size, and liquid-water content in clouds showed that small uncertainties in the basic data eliminate the distinction between different cloud droplet-size distributions and are a source of large errors in the determination of the droplet size. Calculations of the trajectories of cloud droplets in incompressible and compressible flow fields around a cylinder were performed on a… more
Date: September 5, 1952
Creator: Brun, R. J.; Lewis, W.; Perkins, P. J. & Serafini, J. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen