8,581 Matching Results

Search Results

World nuclear outlook 1995

Description: As part of the EIA program to provide energy information, this analysis report presents the current status and projections through 2015 of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. It also contains information and forecasts of developments in the uranium market. Long-term projections of US nuclear capacity, generation, and spent fuel discharges for two different scenarios through 2040 are developed for the Department of Energy`s Office of Civilian Radioactive Waste Management (OCRWM). In turn, the OCRWM provides partial funding for preparation of this report. The projections of uranium requirements are provided to the Organization for Economic Cooperation and Development (OECD) for preparation of the Nuclear Energy Agency/OECD report, Summary of Nuclear Power and Fuel Cycle Data in OECD Member Countries.
Date: September 29, 1995
Partner: UNT Libraries Government Documents Department

Microwave melt and offgas analysis results from a Ferro Corporation{reg_sign} glass frit

Description: In support of the Residue Treatment Technology (RTT) Microwave Solidification project, Waste Projects and Surface Water personnel conducted a series of experiments to determine the feasibility of encapsulating a surrogate sludge waste using the microwave melter. The surrogate waste was prepared by RTT and melted with five varying compositions of low melting glass frit supplied by the Ferro Corporation. Samples were melted using a 50% waste/50% glass frit and a 47.5% waste/47.5% glass frit/5% carbon powder. This was done to evaluate the effectiveness of carbon at reducing a sulfate-based surface scale which has been observed in previous experiments and in full-scale testing. These vitrified samples were subsequently submitted to Environmental Technology for toxicity characteristic leaching procedure (TCLP) testing. Two of the five frits tested in this experiment merit further evaluation as raw materials for the microwave melter. Ferro frit 3110 with and without carbon powder produced a crystalline product which passed TCLP testing. The quality of the melt product could be improved by increasing the melting temperature from 900{degrees}C to approximately 1150-1200{degrees}C. Ferro frit 3249 produced the optimal quality of glass based on visual observations, but failed TCLP testing for silver when melted without carbon powder. This frit requires a slightly higher melting temperature ({ge} 1200{degrees}C) compared to frit 3110 and produces a superior product. In conjunction with this work, Surface Water personnel conducted offgas analyses using a Thermal Desorption Mass Spectrometer (TDMS) on selected formulations. The offgas analyses identified and quantified water vapor (H{sub 2}O), oxygen (O{sub 2}) and carbon oxides (CO and CO{sub 2}), sulfur (S) and sulfur oxides (SO and SO{sub 2}), and nitrogen (N{sub 2}) and nitrogen oxides (NO and NO{sub 2}) that volatilized during glass formation.
Date: March 1, 1995
Creator: Phillips, J.A.; Hoffman, C.R. & Knutson, P.T.
Partner: UNT Libraries Government Documents Department

500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Technical progress report, second quarter 1994, April 1994--June 1994

Description: This quarterly report discusses the technical progress of an Innovative Clean Coal Technology (ICCT) demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from coal-fired boilers. The project is being conducted at Georgia Power Company`s Plant Hammond Unit 4 located near Rome, Georgia. The primary goal of this project is the characterization of the low NOx combustion equipment through the collection and analysis of long-term emissions data. A target of achieving fifty percent NOx reduction using combustion modifications has been established for the project. The project provides a stepwise retrofit of an advanced overfire air (AOFA) system followed by low NOx burners (LNB). During each test phase of the project, diagnostic, performance, long-term, and verification testing will be performed. These tests are used to quantify the NOx reductions of each technology and evaluate the effects of those reductions on other combustion parameters. Results are described.
Date: September 1, 1995
Partner: UNT Libraries Government Documents Department

Fire modeling of the Heiss Dampf Reaktor containment

Description: This report summarizes Sandia National Laboratories` participation in the fire modeling activities for the German Heiss Dampf Reaktor (HDR) containment building, under the sponsorship of the United States Nuclear Regulatory Commission. The purpose of this report is twofold: (1) to summarize Sandia`s participation in the HDR fire modeling efforts and (2) to summarize the results of the international fire modeling community involved in modeling the HDR fire tests. Additional comments, on the state of fire modeling and trends in the international fire modeling community are also included. It is noted that, although the trend internationally in fire modeling is toward the development of the more complex fire field models, each type of fire model has something to contribute to the understanding of fires in nuclear power plants.
Date: September 1995
Creator: Nicolette, V. F. & Yang, K. T.
Partner: UNT Libraries Government Documents Department

The Carnol process for CO{sub 2} mitigation from power plants and the transportation sector

Description: A CO{sub 2} mitigation process is developed which converts waste CO{sub 2}, primarily recovered from coal-fired power plant stack gases with natural gas, to produce methanol as a liquid fuel and coproduct carbon as a materials commodity. The Carnol process chemistry consists of methane decomposition to produce hydrogen which is catalytically reacted with the recovered waste CO{sub 2} to produce methanol. The carbon is either stored or sold as a materials commodity. A process design is modelled and mass and energy balances are presented as a function of reactor pressure and temperature conditions. The Carnol process is a viable alternative to sequestering CO{sub 2} in the ocean for purposes of reducing CO{sub 2} emissions from coal burning power plants. Over 90% of the CO{sub 2} from the coal burning plant is used in the process which results in a net CO{sub 2} emission reduction of over 90% compared to that obtained for conventional methanol production by steam reforming of methane. Methanol as an alternative liquid fuel for automotive engines and for fuel cells achieves additional CO{sub 2} emission reduction benefits. The economics of the process is greatly enhanced when carbon can be sold as a materials commodity. Improvement in process design and economics should be achieved by developing a molten metal (tin) methane decomposition reactor and a liquid phase, slurry catalyst, methanol synthesis reactor directly using the solvent saturated with CO{sub 2} scrubbed from the power plant stack gases. The benefits of the process warrant its further development.
Date: August 1, 1995
Creator: Steinberg, M.
Partner: UNT Libraries Government Documents Department

Removal of mixing pump in tank 102-AP -- pump drop onto central pit

Description: The mixing pump, if dropped in the pump pit following its removal from the tank, is incapable of compromising the tank structure either locally or in a structural displacement mode to an extent which might allow dispersion of the contents. A drop from 10 ft above the pit floor (considered the maximum credible height) of a pump which is considered perfectly rigid does not approach the required perforation velocity. The velocity required to perforate requires a drop height which is physically impossible to attain with existing cranes. An analysis of the location of the deposition of the strain energy required to match the pump`s impact kinetic energy, the results of which are shown in Table 2, verifies that there is no credible chance for compromise of the tank roof by such a drop.
Date: June 20, 1995
Creator: Jimenez, R. F.
Partner: UNT Libraries Government Documents Department

Controlling incipient oxidation of pyrite for improved rejection. Technical progress report for the ninth quarter, October 1--December 31, 1994

Description: The major objectives of this work are (1) to determine the Eh-pH conditions under which pyrite is stable, (2) to determine the mechanism of the initial stages of pyrite oxidation, and (3) to determine if the semi-conducting properties of pyrite effects its oxidation behavior. It is known that moderate oxidation of pyrite produces a hydrophobic surface product. This hydrophobic product makes it extremely difficult to depress pyrite in coal flotation circuits. The eventual objective of this work is to prevent pyrite oxidation in order to better depress pyrite in coal flotation circuits. It has been shown that by holding the potential of pyrite at its stable potential during fracture, pyrite undergoes neither oxidation nor reduction. It has also been found that fresh pyrite surfaces created by fracture in an electrochemical begin to oxidize at potentials that are about 200 mV more negative than the potentials reported in the literature for pyrite oxidation. This report period, electrochemical impedance spectroscopy (EIS) studies were continued. As discussed in the seventh quarterly progress report, the impedance of pyrite does not show the characteristics expected for either semi-conducting or metallic electrodes. Additional studies were conducted to confirm the anomalous impedance behavior. For this purpose, freshly fractured surfaces were progressively polished on 600 and 1,200 grit silicon carbide paper, and with 0.3 {micro} {alpha}-alumina and 0.05 {micro} {gamma}-alumina micropolish. Polishing is known to introduce defects in the lattice structure of semi-conducting electrodes and it was anticipated that the defects would effect the interfacial capacitance.
Date: July 1, 1995
Creator: Yoon, R.H. & Richardson, P.E.
Partner: UNT Libraries Government Documents Department

Laser tabbed die: A repairable, high-speed die-interconnection technology. 1994 LDRD final report 93-SR-089

Description: A unique technology for multichip module production is presented. The technology, called Laser Tabbed Die (L-TAB), consists of a method for forming surface-mount-type {open_quotes}gull wing{close_quotes} interconnects on bare dice. The dice are temporarily bonded to a sacrificial substrate which has a polymer thin film coated onto it. The gull wings are formed on the side of the die with a direct-write laser patterning process which allows vertical as well as horizontal image formation. Using the laser patterning system, trenches are formed in a positive electrodeposited photoresist (EDPR) which is plated onto a metal seed layer, allowing copper to be electroplated through the resultant mask. After stripping the resist and the metal seed layer, the polymer film on the substrate is dissolved, releasing the chip with the {open_quotes}gull wings{close_quotes} intact. The chips are then bonded onto a circuit board or permanent substrate with solder or conductive adhesive.
Date: September 1, 1995
Creator: Malba, V. & Bernhardt, A.F.
Partner: UNT Libraries Government Documents Department

Process modeling of hydrothermal treatment of municipal solid waste to form high solids slurries in a pilot scale system

Description: Two models are developed for characterizing the hydrothermal decomposition of municipal solid waste (MSW) in a pilot scale facility. The process modeled involves the use of high pressure steam to directly heat surrogate MSW, newspaper, to temperatures and pressures where decomposition reactions breakdown the organic matter to form a coal like solid having properties which make it suitable as a feedstock for a commercial gasifier. One model uses the ASPEN steady-state simulator. This model is only capable of computing a limited number of process variables. To more adequately deal with the transient behavior of the inherently batch process a second transient model is formulated. The model allows important process temperatures, pressures, gas flows and compositions to be calculated as a function of time. The model has been used to scope possible operating scenarios for proposed pilot scale experiments and these results are presented. Based on computed results a recommendation is made that the first pilot experiment use a dampened feed material containing a water-to-dry newspaper ratio of 0.5 to 1. The transient model predicts that this will result in a slurry product in the reactor vessel after cooldown containing 57 wt.% water.
Date: February 16, 1995
Creator: Thorsness, C.B.
Partner: UNT Libraries Government Documents Department

Petroleum supply monthly, August 1995 with data for June 1995

Description: Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.
Date: August 25, 1995
Partner: UNT Libraries Government Documents Department

Federal government, utility, manufacturer: A unique partnership for comprehensive water efficiency

Description: A partnership among the Federal government, a utility, and water efficient equipment manufacturers was developed in response to the Executive Order 12902, Energy and Efficiency in Federal Facilities, where water conservation is still a fairly undeveloped part of resource conservation in the Federal government. The Department of Energy`s Federal Energy Management Program (with the National Renewable Energy Laboratory) managed the project, bringing together the Environmental Protection Agency, General Services Administration and Bureau of Reclamation with Denver Water and four water use equipment manufacturers to install and test water-saving indoor and outdoor technologies at the Denver Federal Center. This paper will describe the process used to form this partnership and document the results and its potential impact.
Date: October 1, 1995
Creator: Mayo, K.
Partner: UNT Libraries Government Documents Department

Environmental Assessment for the High Explosives Wastewater Treatment Facility, Los Alamos National Laboratory, Los Alamos, New Mexico

Description: The Department of Energy (DOE) has identified a need to improve the management of wastewater resulting from high explosives (HE) research and development work at Los Alamos National Laboratory (LANL). LANL`s current methods off managing HE-contaminated wastewater cannot ensure that discharged HE wastewater would consistently meet the Environmental Protection Agency`s (EPA`s) standards for wastewater discharge. The DOE needs to enhance He wastewater management to e able to meet both present and future regulatory standards for wastewater discharge. The DOE also proposes to incorporate major pollution prevention and waste reduction features into LANL`s existing HE production facilities. Currently, wastewater from HE processing buildings at four Technical Areas (TAs) accumulates in sumps where particulate HE settles out and barium is precipitated. Wastewater is then released from the sumps to the environment at 15 permitted outfalls without treatment. The released water may contain suspended and dissolved contaminants, such as HE and solvents. This Environmental Assessment (EA) analyzes two alternatives, the Proposed Action and the Alternative Action, that would meet the purpose and need for agency action. Both alternatives would treat all HE process wastewater using sand filters to remove HE particulates and activated carbon to adsorb organic solvents and dissolved HE. Under either alternative, LANL would burn solvents and flash dried HE particulates and spent carbon following well-established procedures. Burning would produce secondary waste that would be stored, treated, and disposed of at TA-54, Area J. This report contains the Environmental Assessment, as well as the Finding of No Significant Impact and Floodplain Statement of Findings for the High Explosives Wastewater Treatment Facility.
Date: August 3, 1995
Partner: UNT Libraries Government Documents Department

Baseline risk assessment of ground water contamination at the uranium mill tailings site near Durango, Colorado. Revision 1

Description: For the UMTRA Project site located near Durango, Colorado (the Durango site), the Surface Project cleanup occurred from 1986 to 1991. An evaluation was made to determine whether exposure to ground water contaminated by uranium processing could affect people`s health. Exposure could occur from drinking water pumped from a hypothetical well drilled in the contaminated ground water area. In addition, environmental risks may result if plants or animals are exposed to contaminated ground water, or surface water that has mixed with contaminated ground water. This risk assessment report is the first site-specific document prepared for the UMTRA Ground Water Project at the Durango site. The results of this report and further site characterization of the Durango site will be used to determine what is necessary to protect public health and the environment, and to comply with the EPA standards.
Date: September 1, 1995
Partner: UNT Libraries Government Documents Department

Petroleum supply monthly, September 1995 with data for July 1995

Description: The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.
Date: September 27, 1995
Partner: UNT Libraries Government Documents Department

Vapor space characterization of waste tank 241-C-106: Results from samples collected on February 15, 1994

Description: This document presents the details of the inorganic and organic analysis that was performed on samples from the headspace of Hanford waste tank 241-C-106. The results described were obtained to support the safety and toxicological evaluations. A summary of the results for the inorganic and organic analytes is included, as well as, a detailed description of the results which appears in the text.
Date: June 1, 1995
Creator: McVeety, B.D.; Clauss, T.W.; Young, J.S.; Ligotke, M.W.; Goheen, S.C.; Lucke, R.B. et al.
Partner: UNT Libraries Government Documents Department

Measurement of extensional viscosity by the stretching of viscoelastic liquid columns. Quarterly report, April--June, 1995

Description: Recent work in the field of atomization has explored the breakup of viscoelastic liquids. Studies have observed that viscoelastic liquids are much more resistant to breakup in comparison with Newtonian liquids. This high resistance to breakup has been attributed to the high extensional viscosities that viscoelastic liquids possess. Although extensional viscosity has been identified as having a major influence on the mode of breakup, no studies have yet been successful in correlating spray quality with a parameter that is truly description of the extensional viscosity of viscoelastic liquids. In this study, a new method is used to determine the extensional viscosities of viscoelastic liquids by the stretching of liquid columns. This method is used to show quantitative variations in extensional viscosity as a function of polymer concentration in aqueous solutions of polyacrylamide e10. Results suggest that as polymer concentration is increased, the liquids exhibit extension thickening behavior.
Date: October 1, 1995
Creator: Calvo, D. & Chigier, N.
Partner: UNT Libraries Government Documents Department

Field verification of CO{sub 2} foam. Final report

Description: The East Vacuum Grayburg/San Andres Unit (EVGSAU), operated by Phillips Petroleum Company, was the site selected for a comprehensive evaluation of the use of foam for improving the effectiveness of a CO{sub 2} flood. This project, entitled ``Field Verification of CO{sub 2}-Foam,`` was jointly funded by the EVGSAU working interest owners, the US Department of Energy (DOE), and the State of New Mexico. The DOE provided $2 million or approximately 34% of the total project costs, the EVGSAU provided $2.46 million, the State of New Mexico contributed approximately $1.2 million, and about $103,000 of other industrial funds were used. The Petroleum Recovery Research Center (PRRC), a division of the New Mexico Institute of Mining and Technology, provided laboratory and research support for the project. A joint project advisory team composed of technical representatives from several major oil companies provided input, review, and guidance for the project. The project, which began in 1989, had a scheduled duration of four years, but the DOE granted a no-cost extension to the end of March 1995 for the purpose of continued project evaluation. A field test of the CO{sub 2}-foam has been successfully conducted, and preliminary results are promising. Response in the foam injection well has been as anticipated, and an offset producing well experienced a positive oil response as a result of the foam test. Based on the favorable results observed in the foam injection test, a second foam test was conducted. The monitoring program included analysis of injectivity data, pressure falloff tests, observation well logs, interwell tracer response, production logs, history of production rates, and changes in gas-oil ratio. This report presents an overview of the project and provides results of the laboratory work, simulation studies, and field tests.
Date: June 1, 1995
Creator: Martin, F.D.; Heller, J.P. & Weiss, W.W.
Partner: UNT Libraries Government Documents Department

Fluid dynamics of pressurized, entrained coal gasifiers. Technical progress report, April 1, 1995--June 30, 1995

Description: A study of the fluid dynamics of Pressurized Entrained Coal Gasifiers (PECGs) is being conducted. The idea is to simulate the flows in generic industrial PECGs using dimensional simulitude. A unique entrained gas-solid flow facility with the flexibility to recycle rather than discard gases other than air has been utilized. By matching five dimensionaless parameters, suspensions in mixtures of helium, carbon dioxide and sulfur hexafluoride simulate the effects of pressure and scale-up on the fluid dynamics of PECGs.
Date: October 1, 1995
Creator: Louge, M.Y.
Partner: UNT Libraries Government Documents Department

Fossil Energy Program annual progress report for April 1994 through March 1995

Description: This report covers progress made during the period April 1, 1994, through March 31, 1995, for research and development projects that contribute to the advancement of various fossil energy technologies. Projects on the Fossil Energy Program are supported by the DOE Office of Fossil Energy, and DOE Morgantown Energy Technology Center, the DOE Pittsburgh Energy Technology Center, the DOE Fossil Energy Clean Coal Technology Program, the DOE Bartlesville Project Office, and the DOE Fossil Energy Office of Strategic Petroleum Reserve. The following research areas are covered in this report: Materials research and development; Environmental analysis support; Bioprocessing research; Coal combustion research; and Fossil fuels supplies modeling and research. Selected papers have been processed separately for inclusion in the Energy Science an Technology database.
Date: June 1, 1995
Partner: UNT Libraries Government Documents Department

Forces in a thin cosine(n{theta}) helical wiggler

Description: We commence with the derivation of the Lorentz force density on a surface of discontinuity based on the expressions of fields and currents previously derived (Appendix A). Applying such Lorentz body forces to the equilibrium condition of an infinitesimal surface area yields a set of differential equations for the local total force. In attempting to solve such differential equations it may prove to be useful and prudent to reduce their complexity by first transforming all fields, current densities and Lorentz forces to a coordinate system that is aligned with the direction of the current flow. A Frenet--Serret rotating unit vector coordinate system may serve such a purpose and will reduce the 3 components of the Lorentz force to 2. We proceed with obtaining such a conversion through the use of differential geometry, although a more straight forward approach may exist through the use of surface developability and coordinate transformation. Following a solution to the force equations we continue with and example of a nested set of a combined function dipole and quadrupole that employ an identical periodicity {omega}. The expressions for the self force and the mutual force on each magnet element are obtained. Finally, by reducing the periodicity {omega} to zero we obtain the force expressions for long (2D) multipole magnets including both the self and interactive forces.
Date: March 1, 1995
Creator: Caspi, S.
Partner: UNT Libraries Government Documents Department

Evaluation of hyperbaric filtration for fine coal dewatering. Eleventh quarterly technical progress report, April 1, 1995--June 30, 1995

Description: The main objectives of the project are to investigate the fundamental aspects of particle-liquid interaction in fine coal dewatering, to conduct laboratory and pilot plant studies on the applicability of hyperbaric filter systems and to develop process conditions for dewatering of fine clean coal to less than 20 percent moisture. The program consist of three phases, namely Phase I - Model Development, Phase II - Laboratory Studies, Phase III - Field Testing. The Pennsylvania State University is leading efforts in Phase I, the University of Kentucky in Phase II, and Consol Inc. in Phase III of the program. All three organizations are involved in all the three phases of the program. The Pennsylvania State University is developing a theoretical model for hyperbaric filtration systems, whereas the University of Kentucky is conducting experimental studies to investigate fundamental aspects of particle-liquid interaction and application of high pressure filter in fine coal dewatering. The optimum filtration conditions identified in Phase I and II will be tested in a Consol Inc. coal preparation plant using an Andritz Ruthner portable hyperbaric filtration unit.
Date: December 1, 1995
Creator: Parekh, B.K.; Hogg, R. & Fonseca, A.
Partner: UNT Libraries Government Documents Department

Wildlife use of NPDES outfalls at Los Alamos National Laboratory

Description: From July through October of 1991, the Biological Resources Evaluation Team (BRET) surveyed 133 of the 140 National Pollutant Discharge and Elimination System outfalls at Los Alamos National Laboratory (LANL). The purpose of the survey was to determine the use of these wastewater outfalls by wildlife. BRET observed wildlife or evidence of wildlife (scat, tracks, or bedding) by 35 vertebrate species in the vicinity of the outfalls, suggesting these animals could be using water from outfalls. Approximately 56% of the outfalls are probably used or are suitable for use by large mammals as sources of drinking water. Additionally, hydrophytic vegetation grows in association with approximately 40% of the outfalls-a characteristic that could make these areas eligible for wetland status. BRET recommends further study to accurately characterize the use of outfalls by small and medium-sized mammals and amphibians. The team also recommends systematic aquatic macroinvertebrate studies to provide information on resident communities and water quality. Wetland assessments may be necessary to ensure compliance with wetland regulations if LANL activities affect any of the outfalls supporting hydrophytic vegetation.
Date: September 1, 1995
Creator: Foxx, T. & Blea-Edeskuty, B.
Partner: UNT Libraries Government Documents Department

Comparisons of ASTM standards cited in the NRC standard review plan, NUREG-0800 and related documents

Description: This report provides the results of comparisons of the cited and latest versions of ASTM standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC`s Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review.
Date: October 1995
Creator: Ankrum, A. R.; Bohlander, K. L.; Gilbert, E. R.; Pawlowski, R. A. & Spiesman, J. B.
Partner: UNT Libraries Government Documents Department

The role of recycle oil in direct coal liquefaction process development

Description: It has long been recognized that use of a recycle oil is a convenient and perhaps necessary feature of a practical direct coal liquefaction process. The recycle oil performs a number of important functions. It serves as a vehicle to convey coal into the liquefaction reactor and products from the reactor. It is a medium for mass and heat transfer among the solid, liquid, and gaseous components of the reactor inventory. It can act as a reactant or intermediate in the liquefaction process. Therefore, the nature of the recycle oil can have a determining effect on process configuration and performance, and the characterization of recycle oil composition and chemistry has been the subject of considerable interest. This paper discusses recycle oil characterization and its influence on the industrial development of coal liquefaction technology,
Date: August 1, 1995
Creator: Burke, F. P.
Partner: UNT Libraries Government Documents Department