60 Matching Results

Search Results

Advanced search parameters have been applied.

FY2005 Progress Summary and FY2006 Program Plan Statement of Work and Deliverables for Development of High Average Power Diode-Pumped Solid State Lasers, and Complementary Technologies, for Applications in Energy and Defense

Description: The primary focus this year was to operate the system with two amplifiers populated with and pumped by eight high power diode arrays. The system was operated for extended run periods which enabled average power testing of components, diagnostics, and controls. These tests were highly successful, with a demonstrated energy level of over 55 joules for 4 cumulative hours at a repetition rate of 10 Hz (average power 0.55 kW). In addition, high average power second harmonic generation was demonstrated, achieving 227 W of 523.5 nm light (22.7 J, 10 Hz, 15 ns, 30 minutes) Plans to achieve higher energy levels and average powers are in progress. The dual amplifier system utilizes a 4-pass optical arrangement. The Yb:S-FAP slabs were mounted in aerodynamic aluminum vane structures to allow turbulent helium gas flow across the faces. Diagnostic packages that monitored beam performance were deployed during operation. The laser experiments involved injecting a seed beam from the front end into the system and making four passes through both amplifiers. Beam performance diagnostics monitored the beam on each pass to assess system parameters such as gain and nearfield intensity profiles. This year, an active mirror and wavefront sensor were procured and demonstrated in an off-line facility. The active mirror technology can correct for low order phase distortions at user specified operating conditions (such as repetition rates different than 10 Hz) and is a complementary technology to the static phase plates used in the system for higher order distortions. A picture of the laser system with amplifier No.2 (foreground) and amplifier No.1 (background) is shown in Fig. The control system and diagnostics were recently enhanced for faster processing and allow remote operation of the system. The growth and fabrication of the Yb:S-FAP slabs constituted another major element of our program objectives. Our goal ...
Date: March 24, 2006
Creator: Ebbers, C
Partner: UNT Libraries Government Documents Department

Summary of known linear and nonlinear optical properties of LiInS{sub 2}

Description: LiInS{sub 2} is a potentially useful crystal for cascaded parametric frequency conversion in the mid-IR. It is nearly noncritically phasematched for 1.064 {mu}m pumped, degenerate 2.12 {mu}m generation and 2 micron pumped generation of 3--5 {mu}m light. The nonlinear optical coefficients are 2{times} larger than those of KTP or KTA, while the transparency extends from 0.5--8 {mu}m. LiInS{sub 2} crystals are currently available in volumes up to 5 mm{sup 3}. This memo provides a brief summary of the current literature concerning the growth and linear and nonlinear optical properties of LiInS{sub 2}.
Date: February 24, 1994
Creator: Ebbers, C.
Partner: UNT Libraries Government Documents Department

Optical and thermo-optical characterization of KTP and its isomorphs for 1.06 {micro}m pumped OPO`s

Description: The need to protect personnel from inadvertent eye trauma from fielded laser sources dictates that the highest externally accessible fluences produced by these systems be kept below the maximum permissible exposure (MPE) for intra-beam viewing. The large MPE value for a typical Q-switched (10 ns pulsewidth) source is 1 J/cm{sup 2} for wavelengths in the range of 1.5--1.8 microns, while the MPE for a similar pulsewidth Nd:YAG source is 5 {micro}J/cm{sup 2}. This 5 order of magnitude difference in the MPE is one reason for the trend towards shifting the output of near infrared sources used for remote sensing or ranging to the eyesafe wavelength region, even at the expense of overall system efficiency. There are 5 nonlinear optical crystals available with apertures of at least 10 x 10 mm{sup 2} which are also highly transparent in the 1.5 micron region; LiNbO{sub 3}, KNbO{sub 3}, KTP, KTA, and RTA. All 5 crystals are capable of 1,555 nm generation in an orientation with a favorable nonlinear optical coupling. However, KTP, KTA, or RTA are preferred materials, given that the generated signal of the OPO should remain at a fixed wavelength, insensitive to angular or thermal variations. The authors have characterized the phasematching angle, linewidth, thermal conductivity, and d{lambda}/dT for KTP, KTA, and RTA optical parametric oscillators.
Date: February 17, 1996
Creator: Ebbers, C.A. & Velsko, S.P.
Partner: UNT Libraries Government Documents Department

The Mercury Laser System-A scaleable average-power laser for fusion and beyond

Description: Nestled in a valley between the whitecaps of the Pacific and the snowcapped crests of the Sierra Nevada, Lawrence Livermore National Laboratory (LLNL) is home to the nearly complete National Ignition Facility (NIF). The purpose of NIF is to create a miniature star-on demand. An enormous amount of laser light energy (1.8 MJ in a pulse that is 20 ns in duration) will be focused into a small gold cylinder approximately the size of a pencil eraser. Centered in the gold cylinder (or hohlraum) will be a nearly perfect sphere filled with a complex mixture of hydrogen gas isotopes that is similar to the atmosphere of our Sun. During experiments, the laser light will hit the inside of the gold cylinder, heating the metal until it emits X-rays (similar to how your electric stove coil emits visible red light when heated). The X-rays will be used to compress the hydrogen-like gas with such pressure that the gas atoms will combine or 'fuse' together, producing the next heavier element (helium) and releasing energy in the form of energetic particles. 2010 will mark the first credible attempt at this world-changing event: the achievement of fusion energy 'break-even' on Earth using NIF, the world's largest laser! NIF is anticipated to eventually perform this immense technological accomplishment once per week, with the capability of firing up to six shots per day - eliminating the need for continued underground testing of our nation's nuclear stockpile, in addition to opening up new realms of science. But what about the day after NIF achieves ignition? Although NIF will achieve fusion energy break-even and gain, the facility is not designed to harness the enormous potential of fusion for energy generation. A fusion power plant, as opposed to a world-class engineering research facility, would require that the laser deliver ...
Date: March 26, 2008
Creator: Ebbers, C A & Moses, E I
Partner: UNT Libraries Government Documents Department

CW and Q-switched performance of a diode end-pumped Yb:YAG laser. Revision 1

Description: Using an end-pumped technology developed at LLNL we have demonstrated a Yb:YAG laser capable of delivering up to 434 W of CW power and 226 W of Q-switched power. In addition, we have frequency doubled the output to 515 nm using a dual crystal scheme to produce 76 W at 10 kHz in a 30 ns pulse length.
Date: February 19, 1997
Creator: Bibeau, C.; Beach, R.; Ebbers, C.; Emanuel, M. & Skidmore, J.
Partner: UNT Libraries Government Documents Department

Performance of a diode-end-pumped Yb:YAG laser

Description: Using an end-pumped technology developed at LLNL we have demonstrated a Yb:YAG laser capable of delivering up to 434 W of CW power and 280 W of Q-switched power. In addition, we have frequency doubled the output to 515 nm using a dual crystal scheme to produce 76 W at 10 kHz in a 30 ns pulse length.
Date: May 5, 1997
Creator: Bibeau, C.; Beach, R.; Ebbers, C. & Emanuel, M.
Partner: UNT Libraries Government Documents Department

Yb{sup 3+}:BaCaBO{sub 3}F: A potential new self-frequency-doubling laser material

Description: Yb:BaCaBO{sub 3}F (Yb:BCBF) has been investigated as a new laser crystal with potential for self-frequency-doubling. An YB:BCBF laser has been pumped at 912 mm, and a measured slope efficiency of 38% has been obtained for the fundamental laser output at 1034 nm. Single crystal powders of BCBF have been compared with K*P for a relative measure of the second harmonic generating potential, yielding d{sub eff}[BCBF]= (0-66)d{sub eff}[K*P]. The growth, spectroscopy, laser performance, and linear and nonlinear optical properties of YB:BCBF are reported here.
Date: March 9, 1995
Creator: Schaffers, K.I.; DeLoach, L.D.; Ebbers, C.A. & Payne, S.A.
Partner: UNT Libraries Government Documents Department

The Mercury Laser Advances Laser Technology for Power Generation

Description: The National Ignition Facility (NIF) at Lawrence Livermore Laboratory is on target to demonstrate 'breakeven' - creating as much fusion-energy output as laser-energy input. NIF will compress a tiny sphere of hydrogen isotopes with 1.8 MJ of laser light in a 20-ns pulse, packing the isotopes so tightly that they fuse together, producing helium nuclei and releasing energy in the form of energetic particles. The achievement of breakeven will culminate an enormous effort by thousands of scientists and engineers, not only at Livermore but around the world, during the past several decades. But what about the day after NIF achieves breakeven? NIF is a world-class engineering research facility, but if laser fusion is ever to generate power for civilian consumption, the laser will have to deliver pulses nearly 100,000 times faster than NIF - a rate of perhaps 10 shots per second as opposed to NIF's several shots a day. The Mercury laser (named after the Roman messenger god) is intended to lead the way to a 10-shots-per-second, electrically-efficient, driver laser for commercial laser fusion. While the Mercury laser will generate only a small fraction of the peak power of NIF (1/30,000), Mercury operates at higher average power. The design of Mercury takes full advantage of the technology advances manifest in its behemoth cousin (Table 1). One significant difference is that, unlike the flashlamp-pumped NIF, Mercury is pumped by highly efficient laser diodes. Mercury is a prototype laser capable of scaling in aperture and energy to a NIF-like beamline, with greater electrical efficiency, while still running at a repetition rate 100,000 times greater.
Date: January 21, 2009
Creator: Ebbers, C A; Caird, J & Moses, E
Partner: UNT Libraries Government Documents Department

A high average power electro-optic switch using KTP

Description: High damage threshold, high thermal conductivity, and small thermo-optic coefficients make KTiOPO{sub 4} (KTP) an attractive material for use in a high average power Q-switch. However, electro-chromic damage and refractive index homogeneity have prevented the utilization of KTP in such a device in the past. This work shows that electro-chromic damage is effectively suppressed using capacitive coupling, and a KTP crystal can be Q-switched for 1.5 {times} 10{sup 9} shots without any detectable electro-chromic damage. In addition, KTP with the high uniformity and large aperture size needed for a KTP electro-optic Q-switch can be obtained from flux crystals grown at constant temperature. A thermally compensated, dual crystal KTP Q-switch, which successfully produced 50 mJ pulses with a pulse width of 8 ns (FWHM), has been constructed. In addition, in off-line testing the Q-switch showed less than 7% depolarization at an average power loading of 3.2 kW/cm{sup 2}.
Date: April 1, 1994
Creator: Ebbers, C. A.; Cook, W. M. & Velsko, S. P.
Partner: UNT Libraries Government Documents Department

High-Beam-Quality Optical Parametric Chirped-Pulse Amplification in Periodically-Poled KTiOPO4

Description: We have demonstrated a high-gain optical parametric chirped-pulse amplifier for Nd:glass-based short-pulse laser systems based on periodically poled potassium-titanyl-phosphate. Our amplifier produced high single-pass gain, broad bandwidth, excellent beam quality and stability.
Date: September 25, 2003
Creator: Ebbers, C A; Schmidt, J R & Jovanovic, I
Partner: UNT Libraries Government Documents Department

Type 1 Frequency Doubling at 1064 nm in LaCa40(B03)3 (LaCOB), GdCa40(B03)3(GdCOB), and YCa40(B03)3(YCOB)

Description: We have grown and characterized LaCOB, a new member to the GdCOB family of nonlinear crystals. LaCOB has a d{sub eff} of 0.52 {plus_minus} 0.05 pm/V and an angular sensitivity of 1224 {plus_minus} 184 (cm-rad){sup -1} for type I frequency doubling at 1064 nm. The d{sub {alpha}{beta}{beta}} and d{sub {gamma}{beta}{beta}} coefficients of the nonlinear optical tensor for LaCOB, GdCOB, and YCOB were determined to have values of {vert_bar}0.26 {plus_minus} 0.04{vert_bar} pm/V and |1.69 {plus_minus} 0.17| pm/V, respectively. Results of phase-matching angle measurements at 1064 nm and 1047 nm predict LaCOB to be non-critically phase-matched (NCPM) at 1042 {plus_minus} 1.5 nm. We also estimate the thermal sensitivity of LaCOB to be less than 0.1 (cm- C){sup -1}.
Date: March 7, 2001
Creator: Adams, J J; Ebbers, C A; Schaffers, K I & Payne, S A
Partner: UNT Libraries Government Documents Department

Generation of high-contrast millijoule pulses by optical parametric chirped-pulse amplification in periodically poled KTiOPO4

Description: A new high-contrast, high-gain optical parametric chirped-pulse amplifier (OPCPA) architecture is demonstrated in periodically poled KTiOPO{sub 4} (PPKTP). This architecture overcomes parametric fluorescence contrast limitations of OPCPA in periodically poled materials. The scheme is based on two passes of a single, relay imaged, pump pulse and a free-propagating signal pulse through a 1.5 x 5 x 7.5 mm{sup 3} PPKTP crystal. The output energy of 1.2 mJ is generated at a center wavelength of 1053 nm utilizing 24 mJ of pump energy. Prepulse contrast level of >3 x 10{sup 7} has been measured with >10{sup 6} saturated gain in the amplifier. Amplified pulses were compressed to 200 fs. This simple and versatile concept requires only a modest pump energy from a commercial pump laser and represents a possible high-contrast front end for high-energy Nd:glass-based petawatt-class lasers.
Date: October 1, 2004
Creator: Jovanovic, I; Forget, N; Brown, C G; Ebbers, C A; Blanc, C L & Barty, C J
Partner: UNT Libraries Government Documents Department

Laser System for Livermore's Mono Energetic Gamma-Ray Source

Description: A Mono-energetic Gamma-ray (MEGa-ray) source, based on Compton scattering of a high-intensity laser beam off a highly relativistic electron beam, requires highly specialized laser systems. To minimize the bandwidth of the {gamma}-ray beam, the scattering laser must have minimal bandwidth, but also match the electron beam depth of focus in length. This requires a {approx}1 J, 10 ps, fourier-transform-limited laser system. Also required is a high-brightness electron beam, best provided by a photoinjector. This electron source requires a second laser system with stringent requirements on the beam including flat transverse and longitudinal profiles and fast rise times. Furthermore, these systems must be synchronized to each other with ps-scale accuracy. Using a novel hyper-dispersion compressor configuration and advanced fiber amplifiers and diode-pumped Nd:YAG amplifiers, we have designed laser systems that meet these challenges for the X-band photoinjector and Compton-scattering source being built at Lawrence Livermore National Laboratory.
Date: March 14, 2011
Creator: Gibson, D; Albert, F; Bayramian, A; Marsh, R; Messerly, M; Ebbers, C et al.
Partner: UNT Libraries Government Documents Department

Double-passed, high-energy quasi-phase-matched optical parametric chirped-pulse amplifier

Description: Quasi-phase-matched (QPM) optical parametric chirped-pulse amplification (OPCPA) in periodically poled materials such as periodically poled LiNbO{sub 3} (PPLN) and periodically poled KTiOPO{sub 4} (PPKTP) has been shown to exhibit advantages over the OPCPA in bulk nonlinear crystals. [GHH98, RPN02] The use of the maximum material nonlinear coefficient results in ultra-high gain with low pump peak power. Furthermore, propagation of signal, pump, and idler beams along one of the crystal principal axes eliminates the birefringent walk-off, reduces angular sensitivity, and improves beam quality. Relatively high level of parasitic parametric fluorescence (PF) in QPM OPCPA represents an impediment for simple, single-stage, high-gain amplification of optical pulses from nJ to mJ energies. PF in QPM is increased when compared to PF in critical phase matching in bulk crystals as a result of broader angular acceptance of the nonlinear conversion process. PF reduces prepulse contrast and conversion efficiency by competition with the signal pulse for pump pulse energy. Previous experiments with QPM OPCPA have thus resulted in pulse energies limited to tens of {mu}J. [JSE03] Optical parametric amplification of a narrowband signal pulse in PPKTP utilizing two pump beams has been demonstrated at a mJ-level, [FPK03] but the conversion efficiency has been limited by low energy extraction of pump pulse in the first pass of amplification. Additionally, narrow spectral bandwidth was the result of operation far from signal-idler degeneracy. Here we present a novel double-pass, broad-bandwidth QPM OPCPA. 1.2 mJ of amplified signal energy is produced in a single PPKTP crystal utilizing a single 24-mJ pump pulse from a commercial pump laser. [JFE05] To our knowledge, this is the highest energy demonstrated in QPM OPCPA. Double-passed QPM OPCPA exhibits high gain (> 3 x 10{sup 6}), high prepulse contrast (> 3 x 10{sup 7}), high energy stability (3% rms), and excellent beam quality. We ...
Date: September 19, 2005
Creator: Jovanovic, I; Forget, N; Brown, C G; Ebbers, C A; Blanc, C L & Barty, C J
Partner: UNT Libraries Government Documents Department

250 watt average power electro-quality Q-switched diode pumped power oscillator

Description: We describe an electro-optically Q-switched, diode-pumped ND:YAG slab laser oscillator operating at an average power of greater than 250 watts. More than 100 watts of frequency doubled light has been demonstrated.
Date: April 1, 1994
Creator: Velsko, S. P.; Ebbers, C. A.; Comaskey, B.; Albrecht, G. F. & Mitchell, S. C.
Partner: UNT Libraries Government Documents Department

High-average-power diode-end-pumped intracavity-doubled Nd:YAG laser

Description: A compact diode-pumped ND:YAG laser was frequency-doubled to 0.532 {mu}m with an intracavity KTP or LBO crystal using a `V` cavity configuration. Two acousto-optic Q-switches were employed at repetition rates of 10-30 kHz. Dichroic fold and end mirrors were used to output two beams with up to 140 W of 0.532 {mu}m power using KTP and 116 W using LBO as the frequency doubling crystal. This corresponds to 66% of the maximum output power at 1.064 {mu}m obtained with an optimized output coupler reflectivity. The minimum output pulse duration varied with repetition rate from 90 to 130 ns. The multimode output beam had a smooth profile and a beam quality of M{sup 2} = 5 1.
Date: February 12, 1998
Creator: Honea, E.C.; Ebbers, C.A.; Beach, R.J.; Speth, J.A.; Emanuel, M.S>; Skidmore, J.A. et al.
Partner: UNT Libraries Government Documents Department

Highly Efficient Tabletop Optical Parametric Chirped Pulse Amplifier at 1 (micron)m

Description: Optical parametric chirped pulse amplification (OPCPA) is a scalable technology, for ultrashort pulse amplification. Its major advantages include design simplicity, broad bandwidth, tunability, low B-integral, high contrast, and high beam quality. OPCPA is suitable both for scaling to high peak power as well as high average power. We describe the amplification of stretched 100 fs oscillator pulses in a three-stage OPCPA system pumped by a commercial, single-longitudinal-mode, Q-switched Nd:YAG laser. The stretched pulses were centered around 1054 nm with a FWHM bandwidth of 16.5 nm and had an energy of 0.5 nJ. Using our OPCPA system, we obtained an amplified pulse energy of up to 31 mJ at a 10 Hz repetition rate. The overall conversion efficiency from pump to signal is 6%, which is the highest efficiency obtained With a commercial tabletop pump laser to date. The overall conversion efficiency is limited due to the finite temporal overlap of the seed (3 ns) with respect to the duration of the pump (8.5 ns). Within the temporal window of the seed pulse the pump to signal conversion efficiency exceeds 20%. Recompression of the amplified signal was demonstrated to 310 fs, limited by the aberrations initially present in the low energy seed imparted by the pulse stretcher. The maximum gain in our OPCPA system is 6 x 10{sup 7}, obtained through single passing of 40 mm of beta-barium borate. We present data on the beam quality obtained from our system (M{sup 2}=1.1). This relatively simple system replaces a significantly more complex Ti:sapphire regenerative amplifier based CPA system used in the front end of a high energy short pulse laser. Future improvement will include obtaining shorter amplified pulses and higher average power.
Date: December 4, 2001
Creator: Jovanovic, I.; Ebbers, C.A.; Comaskey, B.J.; Bonner, R.A. & Morse, E.C.
Partner: UNT Libraries Government Documents Department

Laser Research and Development Studies for Laser Guide Star Systems

Description: In this paper we consider two CW solid state laser approaches to a 589 nm LGS system. Both are based on the technique of sum-frequency generation, but differ in the cavity architecture. Both technologies are very promising and are worth of further consideration. This preliminary proposal is intended to encompass both designs. A down select shall be performed early in the project execution to focus on the most promising option. The two design options consist of: (1) A dual-frequency resonator with intra-cavity doubling in LB0 offers the promise of a simple architecture and may scale more easily to high power. This design has been shown to be highly reliable, efficient and high power when used in frequency-doubled Nd:YAG lasers for programs at LLNL and in commercial products. The challenge in this design is the demonstration of a high power13 18 nm oscillator with adequate suppression of the 1064 nm line. (2) A MOPA based design uses commercial low power oscillators to produce both wavelengths, then amplifies the wavelengths before doubling. This design requires the demonstration of a 1318 nm amplifier, though the design is scaled from a kW CW amplifier already delivered to a customer at a different wavelength. The design must also demonstrate high power scaling of sum-frequency generation in the relatively new nonlinear material, PPLN. The first step in the process would be to further evaluate the two conceptual options for technical feasibility, cost and constructability. Then a down selection to one design would be conducted. Finally, R&D on that design would then proceed. Minimal testing should be required for this selection. The majority of the funding received would be allocated to development of the design selected.
Date: February 23, 2000
Creator: Pennington, D.; Beach, R.; Ebbers, C.; Erbert, G.; Nguyen, H.; Page, R. et al.
Partner: UNT Libraries Government Documents Department

A Laser Technology Test Facility for Laser Inertial Fusion Energy (LIFE)

Description: A LIFE laser driver needs to be designed and operated which meets the rigorous requirements of the NIF laser system while operating at high average power, and operate for a lifetime of >30 years. Ignition on NIF will serve to demonstrate laser driver functionality, operation of the Mercury laser system at LLNL demonstrates the ability of a diode-pumped solid-state laser to run at high average power, but the operational lifetime >30 yrs remains to be proven. A Laser Technology test Facility (LTF) has been designed to specifically address this issue. The LTF is a 100-Hz diode-pumped solid-state laser system intended for accelerated testing of the diodes, gain media, optics, frequency converters and final optics, providing system statistics for billion shot class tests. These statistics will be utilized for material and technology development as well as economic and reliability models for LIFE laser drivers.
Date: October 6, 2009
Creator: Bayramian, A J; Campbell, R W; Ebbers, C A; Freitas, B L; Latkowski, J; Molander, W A et al.
Partner: UNT Libraries Government Documents Department

Removal of Lattice Imperfections that Impact the Optical Quality of Ti:Sapphire using Advanced Magnetorheological Finishing Techniques

Description: Advanced magnetorheological finishing (MRF) techniques have been applied to Ti:sapphire crystals to compensate for sub-millimeter lattice distortions that occur during the crystal growing process. Precise optical corrections are made by imprinting topographical structure onto the crystal surfaces to cancel out the effects of the lattice distortion in the transmitted wavefront. This novel technique significantly improves the optical quality for crystals of this type and sets the stage for increasing the availability of high-quality large-aperture sapphire and Ti:sapphire optics in critical applications.
Date: February 26, 2008
Creator: Menapace, J A; Schaffers, K I; Bayramian, A J; Davis, P J; Ebbers, C A; Wolfe, J E et al.
Partner: UNT Libraries Government Documents Department

Yttrium Calcium Oxyborate for high average power frequency doubling and OPCPA

Description: Significant progress has been achieved recently in the growth of Yttrium Calcium Oxyborate (YCOB) crystals. Boules have been grown capable of producing large aperture nonlinear crystal plates suitable for high average power frequency conversion or optical parametric chirped pulse amplification (OPCPA). With a large aperture (5.5 cm x 8.5 cm) YCOB crystal we have demonstrated a record 227 W of 523.5nm light (22.7 J/pulse, 10 Hz, 14 ns). We have also demonstrated the applicability of YCOB for 1053 nm OPCPA.
Date: June 20, 2006
Creator: Liao, Z M; Jovanovic, I; Ebbers, C A; Bayramian, A; Schaffers, K; Caird, J et al.
Partner: UNT Libraries Government Documents Department