Search Results

Advanced search parameters have been applied.
open access

A 0. 4 mm Interferometer System Using Dielectric Waveguide

Description: A 0.4 mm submillimeter-wave, phase-modulated polarimeter/interferometer is used for simultaneous time-dependent measurement of line-averaged electron density and poloidal field-induced Faraday rotation along chords of the plasma column in ISX-B tokamak. Heterodyna detection and hollow dielectric waveguide are utilized to achieve the high sensitivity required for the multichord equipment.
Date: January 1, 1982
Creator: Hutchinson, D. P.; Ma, C. H.; Staats, P. A. & Vander Sluis, K. L.
Partner: UNT Libraries Government Documents Department
open access

A 0. 5 to 3. 0 MeV monoenergetic positron beam

Description: An adjustable, 0.5--3 MeV monoenergetic positron beam has been constructed at Brookhaven. Currently a /sup 22/Na source with a W(100) foil transmission moderator produces a 1.1 mm FWHN beam with an intensity of 3/times/10/sup 5/ e/sup +//sec at a target located downstream from the accelerator. The divergence of the beam is less than 0.1/degree/ at 2.2 MeV energy. A SOA gun with 2 lens transport system brings the beam to a focus at the entrance of an electrostatic 3 MeV Dynamitron accelerator. T… more
Date: 1988~
Creator: Huomo, H.; AsokaKumar, P.; Henderson, S. D.; Phlips, B. F.; Mayer, R.; McDonough, J. et al.
Partner: UNT Libraries Government Documents Department
open access

0. 9 a Gev /sup 238/U on /sup 238/U collisions in the LBL streamer chamber. Appendix A

Description: Charged particle exclusive data for high multiplicity U on U events are reported. Analyses are based on comparison with Cugnon's intranuclear cascade model, and the explosion-evaporation simulation of Fai and Randrup. The azimuthal structure of the observed events shows evidence of collective flow. The widely used flow angle methodology proves to be relatively insensitive to collective effects under the conditions of the present experiment. An isotropic pattern of ejectile emission is not reach… more
Date: January 1, 1984
Creator: Fung, S.Y.; Beavis, D.; Gorn, W.; Keane, D.; Liu, Y.M.; Poe, R.T. et al.
Partner: UNT Libraries Government Documents Department
open access

0.25mm-Thick CCD Packaging for the Dark Energy Survey Camera Array

Description: Abstract: The Dark Energy Survey Camera focal plane array will consist of 62 2k x 4k CCDs with a pixel size of 15 microns and a silicon thickness of 250 microns for use at wavelengths between 400 and 1000 nm. Bare CCD die will be received from the Lawrence Berkeley National Laboratory (LBNL). At the Fermi National Accelerator Laboratory, the bare die will be packaged into a custom back-side-illuminated module design. Cold probe data from LBNL will be used to select the CCDs to be packaged. The … more
Date: 2006-06~
Creator: Derylo, Greg; Diehl, H. Thomas & Estrada, Juan
Partner: UNT Libraries Government Documents Department
open access

0.52eV Quaternary InGaAsSb Thermophotovoltaic Diode Technology

Description: Thermophotovoltaic (TPV) diodes fabricated from 0.52eV lattice-matched InGaAsSb alloys are grown by Metal Organic Vapor Phase Epitaxy (MOVPE) on GaSb substrates. 4cm{sup 2} multi-chip diode modules with front-surface spectral filters were tested in a vacuum cavity and attained measured efficiency and power density of 19% and 0.58 W/cm{sup 2} respectively at operating at temperatures of T{sub radiator} = 950 C and T{sub diode} = 27 C. Device modeling and minority carrier lifetime measurements of… more
Date: June 9, 2004
Creator: Dashiell, M. W.; Beausang, J. F.; Nichols, G.; Depoy, D. M.; Danielson, L. R.; Ehsani, H. et al.
Partner: UNT Libraries Government Documents Department
open access

$D^0 \bar{D}^0$ Mixing at BaBar

Description: This article reviews the recent measurement of D{sup 0}-{bar D}{sup 0} mixing with the D{sup 0} {yields} K{pi} decay channel from the BABAR experiment at the PEP-II B-Factory. Averages from the Heavy Flavor Averaging Group between this result and a previous result from BELLE are also presented.
Date: October 26, 2011
Creator: Coleman, Jonathon
Partner: UNT Libraries Government Documents Department
open access

0-D study of the compression of low temperature spheromaks

Description: Compression of low temperature spheromak plasmas has been studied with the aid of a O-D two-fluid computer code. It is found that in a plasma which is radiation dominated, the electron temperature can be increased by up to a factor of seven for a compression of a factor of two, provided the temperature is above some critical value (approx.25eV) and the electron density particle confinement time product n/sub e/tau/sub p/ greater than or equal to 1 x 10/sup 9/s/cm/sup 3/. If the energy balance i… more
Date: September 1, 1985
Creator: Meyerhofer, D. D.; Hulse, R. A. & Zweibel, E. G.
Partner: UNT Libraries Government Documents Department
open access

D-0 End Calorimeter Warm Tube/TeV Dry Air Purge

Description: This Engineering Note studies the design of the Dry Air Purge that is going to flow through the Warm Tube of the End Calorimeter of the D-O Calorimeter. The Tev tubes through the E.C. can be thought of as a cluster of concentric tubes: The Tev tube, the warm (vacuum vessel) tube, 15 layers of superinsulation, the cold (argon vessel) tube, and the Inner Hadronic center support tube. The Dry Air Purge will involve flowing Dry Air through the annular region between the Warm Tube and the Tev Beam P… more
Date: August 14, 1991
Creator: Leibfritz, J. R.
Partner: UNT Libraries Government Documents Department
open access

D-0 North End Cap Calorimeter Cold Test Results

Description: The North endcap calorimeter vessel was recieved on July 1, 1990. A cooldown of the pressure vessel with liquid nitrogen was performed on July 10-11 to check the vessel's integrity. With the pressure vessel cold, the insulating vacuum was monitored for leaks. Through out the testing, the insulating vacuum remained good and the vessel passed the test. The cold test was carried out per the procedures of D-Zero engineering note 3740.220-EN-250. The test was very similar to the cold test performed … more
Date: August 2, 1990
Creator: Michael, J.
Partner: UNT Libraries Government Documents Department
open access

D-0 South End Cap Calorimeter Cold Test Results

Description: The South endcap calorimeter vessel was moved into Lab A on Sept. 18, 1990. A cooldown of the pressure vessel with liquid nitrogen was performed on Sept. 26 to check the vessel's integrity. With the pressure vessel cold, the insulating vacuum was monitored for leaks. Through out the testing, the insulating vacuum remained good and the vessel passed the test. The cold test was carried out per the procedures of D-Zero engineering note 3740.220-EN-250. The test was very similar to the cold test pe… more
Date: November 26, 1990
Creator: Rucinski, R.
Partner: UNT Libraries Government Documents Department
open access

0/sup -/ to 0/sup +/ beta decay in A = 16

Description: Techniques and results of the measurement of the beta-decay rate of the first excited state of /sup 16/N to the ground state of /sup 16/O are reported. Energy levels involved in the decay are shown, and the /sup 16/N 0/sup -/ beta decay branching ration is given. (WHK)
Date: January 1, 1982
Creator: Gagliardi, C.; Garvey, G. T.; Wrobel, J. R. & Freedman, S. J.
Partner: UNT Libraries Government Documents Department
open access

1.1-meter bore, 8-Tesla test facility

Description: The design and fabrication of a 1.1-m bore superconducting coil for an 8- T facility at Lawrence Livermore Laboratory are discussed. This facility will provide the backing field required for testing large multifilamentary Nb$sub 3$Sn coils as part of the superconductor development program at Livermore. The magnet measures 1.85 m o.d., is 1.5 m in length, and is solenoid wound in four separate modules. Total cold weight of the assembly is 18,000 Kg. A NbTi superconductor is used throughout with … more
Date: November 19, 1975
Creator: Nelson, R.; Cornish, D.; Zbasnik, J.; Sackett, S. & Taylor, C.
Partner: UNT Libraries Government Documents Department
open access

1/2/Sup +/. -->. 1/2/Sup -/ Beta Decay of /Sup 19/Ne and the Parity Nonconserving Nn Force

Description: A branching ratio of (1.20 +- 0.20) x 10/sup -4/ is obtained for the ..beta../sup +/ decay of /sup 19/Ne to the 110 keV 1/2/sup -/ level of /sup 19/F. This transition (presumably dominated by the ..delta..J/sup ..pi../ = 0/sup -/ axial charge operator) provides a crucial test of wavefunctions used in interpreting the parity mixing of the ground and 110 keV levels of /sup 19/F. These wavefunctions, which yield a parity mixing larger than that observed experimentally, also predict too large a ..b… more
Date: 1978~
Creator: Adelberger, E. G.; Hindi, M. M.; Hoyle, C. D.; Swanson, H. E. & Von Lintig, R. D.
Partner: UNT Libraries Government Documents Department
open access

A 1. 5--4 Kelvin detachable cold-sample transfer system: Application to inertially confined fusion with spin-polarized hydrogens fuels

Description: A compact cold-transfer apparatus for engaging and retrieving samples at liquid helium temperatures (1.5--4K), maintaining the samples at such temperatures for periods of hours, and subsequently inserting them in diverse apparatuses followed by disengagement, is described. The properties of several thermal radiation-insulating shrouds, necessary for very low sample temperatures, are presented. The immediate intended application is transportable target-shells containing highly spin-polarized deu… more
Date: January 1, 1990
Creator: Alexander, N.; Barden, J.; Fan, Q. & Honig, A.
Partner: UNT Libraries Government Documents Department
open access

1.5 megawatt dc chopper power supplies for plasma shape control on Doublet III

Description: The Doublet III device is designed to study noncircular plasmas, including doublet and dee-shaped cross-sections. The plasma shape is determined by a system of 24 field-shaping coils which surround the vacuum vessel. Control of the magnetic flux linking these coils allows the plasma shape to be varied and controlled. This paper describes the high-speed dc chopper which is a major component of the field-shaping coil power system. The high-speed dc choppers, with a frequency response of up to 5 k… more
Date: November 1979
Creator: Rock, P. J. & Wesley, J. C.
Partner: UNT Libraries Government Documents Department
open access

A 1.8 Mev K+ injector for the high current beam transport experiment fusion

Description: For the High Current Beam Transport Experiment (HCX) at LBNL, an injector is required to deliver up to 1.8 MV of 0.6 A K{sup +} beam with an emittance of {approx}1 p-mm-mrad. We have successfully operated a 10-cm diameter surface ionization source together with an electrostatic quadrupole (ESQ) accelerator to meet these requirements. The pulse length is {approx}4 {micro}s, firing at once every 10-15 seconds. By optimizing the extraction diode and the ESQ voltages, we have obtained an output bea… more
Date: May 20, 2002
Creator: Kwan, J. W.; Bieniosek, F. M.; Henestroza, E.; Prost, L. & Seidl, P.
Partner: UNT Libraries Government Documents Department
open access

1.5D Quasilinear Model for Alpha Particle-TAE Interaction in ARIES ACT-I

Description: We study the TAE interaction with alpha particle fusion products in ARIES ACT-I using the 1.5D quasilinear model. 1.5D uses linear analytic expressions for growth and damping rates of TAE modes evaluated using TRANSP pro les to calculates the relaxation of pressure pro les. NOVA- K simulations are conducted to validate the analytic dependancies of the rates, and to normalize their absolute value. The low dimensionality of the model permits calculating loss diagrams in large parameter spaces.
Date: January 30, 2013
Creator: Ghantous, K.; Gorelenkov, N. N.; Kessel, C. & Poli, F.
Partner: UNT Libraries Government Documents Department
open access

1-D closure models for slender 3-D viscoelastic free jets: von Karman flow geometry and elliptical cross section

Description: In this paper we derive one space dimensional, reduced systems of equations (1-D closure models) for viscoelastic free jets. We begin with the three-dimensional system of conservation laws and a Maxwell-Jeffreys constitutive law for an incompressible viscoelastic fluid. First, we exhibit exact truncations to a finite, closed system of 1-D equations based on classical velocity assumptions of von Karman. Next, we demonstrate that the 3-D free surface boundary conditions overconstrain these trunca… more
Date: January 1, 1988
Creator: Bechtel, S. E.; Forest, M. G.; Holm, D. D. & Lin, K. J.
Partner: UNT Libraries Government Documents Department
open access

1-D hybrid code for FRM start-up

Description: A one-D hybrid has been developed to study the start-up of the FRM via neutral-beam injection. The code uses a multi-group numerical model originally developed by J. Willenberg to describe fusion product dynamics in a solenoidal plasma. Earlier we described such a model for use in determining self-consistent ion currents and magnetic fields in FRM start-up. However, consideration of electron dynamics during start-up indicate that the electron current will oppose the injected ion current and may… more
Date: January 1, 1982
Creator: Stark, R. A. & Miley, G. H.
Partner: UNT Libraries Government Documents Department
open access

1-D Van der Waals Foams Heated by Ion Beam Energy Deposition

Description: One dimensional simulations of various initial average density aluminum foams (modeled as slabs of solid metal separated by low density regions) heated by volumetric energy deposition are conducted with a Lagrangian hydrodynamics code using a van der Waals equation of state (EOS). The resulting behavior is studied to facilitate the design of future warm dense matter (WDM) experiments at LBNL. In the simulations the energy deposition ranges from 10 to 30 kJ/g and from 0.075 to 4.0 ns total pulse… more
Date: March 19, 2010
Creator: Zylstra, A; Barnard, J J & More, R M
Partner: UNT Libraries Government Documents Department
open access

1-GWh diurnal load-leveling Superconducting Magnetic Energy Storage system reference design

Description: A point reference design has been completed for a 1-GWh Superconducting Magnetic Energy Storage system. The system is for electric utility diurnal load-leveling but can also function to meet much faster power demands including dynamic stabilization. This study explores several concepts of design not previously considered in the same detail as treated here. Because the study is for a point design, optimization in all respects is not complete. This report examines aspects of the coil, the superco… more
Date: September 1, 1979
Creator: Rogers, J. D.; Hassenzahl, W. V. & Schermer, R. I. (comps.)
Partner: UNT Libraries Government Documents Department
open access

1-GWh diurnal load-leveling superconducting magnetic energy storage system reference design. Appendix A: energy storage coil and superconductor

Description: The technical aspects of a 1-GWh Superconducting Magnetic Energy Storage (SMES) coil for use as a diurnal load-leveling device in an electric utility system are presented. The superconductor for the coil is analyzed, and costs for the entire coil are developed.
Date: September 1, 1979
Creator: Schermer, R.I.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen