92 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "Loading Rate"  
Results: 1 - 24 next
open access

2010 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site’s Advanced Test Reactor Complex Cold Waste Pond

Description: This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (#LA 000161 01, Modification B), for the wastewater land application site at the Idaho National Laboratory Site’s Advanced Test Reactor Complex Cold Waste Pond from November 1, 2009 through October 31, 2010. The report contains the following information: • Facility and system description • Permit required effluent monitoring data and loading rates • Groundwater monitoring data • Status of comp… more
Date: February 1, 2011
Creator: lewis, mike
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

2010 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond

Description: This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (#LA 000160 01), for the wastewater reuse site at the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from May 1, 2010 through October 31, 2010. The report contains the following information: • Facility and system description • Permit required effluent monitoring data and loading rates • Groundwater monitoring data • Status of speci… more
Date: February 1, 2011
Creator: Frederick, David B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

2010 Annual Wastewater Reuse Report for the Idaho National Laboratory Site's Central Facilities Area Sewage Treatment Plant

Description: This report describes conditions, as required by the state of Idaho Wastewater Reuse Permit (#LA-000141-03), for the wastewater land application site at Idaho National Laboratory Site’s Central Facilities Area Sewage Treatment Plant from November 1, 2009, through October 31, 2010. The report contains the following information: • Site description • Facility and system description • Permit required monitoring data and loading rates • Status of special compliance conditions • Discussion of the fac… more
Date: February 1, 2011
Creator: lewis, Mike
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

2011 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Advanced Test Reactor Complex Cold Waste Pond

Description: This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (LA 000161 01, Modification B), for the wastewater land application site at the Idaho National Laboratory Site's Advanced Test Reactor Complex Cold Waste Pond from November 1, 2010 through October 31, 2011. The report contains the following information: Facility and system description Permit required effluent monitoring data and loading rates Groundwater monitoring data Status of compliance ac… more
Date: February 1, 2012
Creator: Lewis, Mike
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

2011 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond

Description: This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (LA-000160-01), for the wastewater reuse site at the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from November 1, 2010 through October 31, 2011. The report contains the following information: (1) Facility and system description; (2) Permit required effluent monitoring data and loading rates; (3) Groundwater monitoring data; (4) … more
Date: February 1, 2012
Creator: Frederick, David
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

2011 Annual Wastewater Reuse Report for the Idaho National Laboratory Site’s Central Facilities Area Sewage Treatment Plant

Description: This report describes conditions, as required by the state of Idaho Wastewater Reuse Permit (LA-000141-03), for the wastewater land application site at Idaho National Laboratory Site's Central Facilities Area Sewage Treatment Plant from November 1, 2010, through October 31, 2011. The report contains the following information: (1) Site description; (2) Facility and system description; (3) Permit required monitoring data and loading rates; (4) Status of special compliance conditions and activitie… more
Date: February 1, 2012
Creator: Lewis, Michael G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerosol can puncture device operational test plan

Description: Puncturing of aerosol cans is performed in the Waste Receiving and Processing Facility Module 1 (WRAP 1) process as a requirement of the waste disposal acceptance criteria for both transuranic (TRU) waste and low-level waste (LLW). These cans have contained such things as paints, lubricating oils, paint removers, insecticides, and cleaning supplies which were used in radioactive facilities. Due to Westinghouse Hanford Company (WHC) Fire Protection concerns of the baseline system`s fire/explosio… more
Date: May 3, 1994
Creator: Leist, K. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Am/Cm Canister Temperature Evaluation in Cim5

Description: To facilitate the evaluation of alternate canister designs, 2 canisters were outfitted with thermocouples at elevations of 1/2, 3 1/2, and 6 1/2 inches from the canister bottom. The canisters were fabricated from two inch diameter schedule 10 and two inch diameter schedule 40 stainless steel pipe. Each canister was filled with approximately 2 kilograms of 49 wt percent lanthanide (Ln) loaded 25SrABS glass during 5 inch Cylindrical Induction Melter (CIM5) runs for TTR Tasks 3.03 and 4.03. Melter… more
Date: February 17, 2000
Creator: Baich, M. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An analytical and computational study of combined rate and size effects on material properties.

Description: The recent interests in developing multiscale model-based simulation procedures have brought about the challenging tasks of bridging different spatial and temporal scales within a unified framework. However, the research focus has been on the scale effect in the spatial domain with the loading rate being assumed to be quasi-static. Although material properties are rate-dependent in nature, little has been done in understanding combined loading rate and specimen size effects on the material prop… more
Date: May 1, 2005
Creator: Fang, Huei Eliot; Chen, Zhen (University of Missouri-Columbia, Columbia, MO); Shen, Luming () University of Missouri-Columbia, Columbia, MO) & Gan, Yong (University of Missouri-Columbia, Columbia, MO)
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aqueous Zinc Bromide Waste Solidification

Description: The goal of this study was to select one or more commercially available aqueous sorbents to solidify the zinc bromide solution stored in C-Area, identify the polymer to zinc bromide solution ratio (waste loading) for the selected sorbents, and identify processing issues that require further testing in pilot-scale testing.
Date: July 23, 2002
Creator: Langton, C.A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Assessment of the Losses Due to Self Absorption by Mass Loading on Radioactive Particulate Air Stack Sample Filters

Description: This report discusses the effect of mass loading of a membrane filter on the self absorption of radioactive particles. A relationship between mass loading and percent loss of activity is presented. Sample filters were collected from Pacific Northwest National Laboratory (PNNL) facilities in order to analyze the current self absorption correction factor of 0.85 that is being used for both alpha and beta particles. Over an eighteen month period from February 2009 to July 2010, 116 samples were co… more
Date: January 18, 2011
Creator: Smith, Brian M.; Barnett, J. M. & Ballinger, Marcel Y.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Bench-scale studies with mercury contaminated SRS soil

Description: Bench-scale studies with mercury contaminated soil were performed at the SRTC to determine the optimum waste loading obtainable in the glass product without sacrificing durability, leach resistance, and processability. Vitrifying this waste stream also required offgas treatment for the capture of the vaporized mercury. Four soil glasses with slight variations in composition were produced, which were capable of passing the Product Consistency Test (PCT) and the Toxicity Characteristic Leaching P… more
Date: December 31, 1995
Creator: Cicero, C.A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Catalytic reduction of SO{sub 2} with methane over molybdenum catalyst. Technical report, March 1--May 31, 1995

Description: One of the primary concerns in coal utilization is the emission of sulfur compounds, especially SO{sub 2}. This project deals with catalytic reduction of SO{sub 2} with methane using molybdenum sulfide catalyst supported on different activated carbons: Darco TRS, ROZ-3, and an activated carbon prepared from Illinois coal IBC-110. The work conducted during this quarter included preparation of activated carbons from Illinois coal, preparation of the catalysts on these supports, and experiments on… more
Date: December 1995
Creator: Wiltowski, T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Cementitious Stabilization of Mixed Wastes with High Salt Loadings

Description: Salt loadings approaching 50 wt % were tolerated in cementitious waste forms that still met leach and strength criteria, addressing a Technology Deficiency of low salt loadings previously identified by the Mixed Waste Focus Area. A statistical design quantified the effect of different stabilizing ingredients and salt loading on performance at lower loadings, allowing selection of the more effective ingredients for studying the higher salt loadings. In general, the final waste form needed to con… more
Date: April 1999
Creator: Spence, R. D.; Burgess, M. W.; Fedorov, V. V. & Downing, D. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Characterization of BMS-8-212 for use in penetration simulations

Description: BMS 8-212 lamina properties for use in the computational modeling of aircraft shielding systems were determined in this study. The carbon-reinforced BMS 8-212 composite layups that were tested were unidirectional 0.351-inch thick (45 ply) flat panels. The mechanical responses of the flat panel unidirectional specimens were assumed to be representative of the behavior of the matrix dominated compressive BMS 8-212 lamina responses in the transverse and normal directions. The rate sensitivity of t… more
Date: October 25, 2007
Creator: Kay, G.; Urabe, D.; Shields, A. & DeTeresa, S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Characterization of Min-K TE-1400 Thermal Insulation

Description: Min-K 1400TE insulation material was characterized at Oak Ridge National Laboratory for use in structural applications under gradient temperature conditions. Initial compression testing was performed at room temperature at various loading rates ranging between 5 and 500 psi/hour (≈35 and 3500 kPa/hour) to determine the effect of sample size and test specimen geometry on the compressive strength of Min-K. To determine the loading rates that would be used for stress relaxation testing, comp… more
Date: July 1, 2008
Creator: Hemrick, James Gordon; Lara-Curzio, Edgar & King, James
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Characterization of Min-K TE-1400 Thermal Insulation (Two-Year Gradient Stress Relaxation Testing Update)

Description: Min-K 1400TE insulation material was characterized at Oak Ridge National Laboratory for use in structural applications under gradient temperature conditions. A previous report (ORNL/TM-2008/089) discusses the testing and results from the original three year duration of the project. This testing included compression testing to determine the effect of sample size and test specimen geometry on the compressive strength of Min-K, subsequent compression testing on cylindrical specimens to determine l… more
Date: September 1, 2009
Creator: Hemrick, James Gordon; Lara-Curzio, Edgar & King, James
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Chemical and mechanical performance properties for various final waste forms -- PSPI scoping study

Description: The US DOE is obtaining data on the performance properties of the various final waste forms that may be chosen as primary treatment products for the alpha-contaminated low-level and transuranic waste at the INEL`s Transuranic Storage Area. This report collects and compares selected properties that are key indicators of mechanical and chemical durability for Portland cement concrete, concrete formed under elevated temperature and pressure, sulfur polymer cement, borosilicate glass, and various f… more
Date: September 1996
Creator: Farnsworth, R. K.; Larsen, E. D.; Sears, J. W.; Eddy, T. L. & Anderson, G. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Comparison of the activities of fine-particle size catalysts

Description: The objectives of Sandia`s fine-particle size catalyst testing project are to evaluate and compare the activities of the fine-particle size catalysts being developed in DOE/PETCs Advanced Research Coal Liquefaction Program by using standard coal liquefaction test procedures. The standard procedures use Blind Canyon coal, phenanthrene as the reaction solvent, and a factorial experimental design with temperatures from 350{degrees}C to 400{degrees}C, reaction times from 20 to 60 minutes, and catal… more
Date: December 31, 1994
Creator: Stohl, F. V.; Diegert, K. V. & Goodnow, D. C.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Complexants for actinide element coordination and immobilization

Description: The goal of this project is to develop inorganic metal oxide clusters known as polyoxoanions (POAs) as complexants for the immobilization of actinide (An) ions from high-level waste (HLW). A diverse array of rugged isopolyoxoanions, [M{sub x}O{sub y}]{sup z{minus}}, and heteropolyoxoanions, [X{sub a}M{sub b}O{sub c}]{sup d{minus}}, comprised of M = V, Mo, W and X = Si, P polyhedra will be investigated for their ability to incarcerate An ions. The research combines two objectives--An-POA coordin… more
Date: March 14, 2000
Creator: Antonio, M.R.; Soderholm, L.; Williams, C.W. & Francesconi, L.C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Composition and property measurements for PHA Phase 4 glasses

Description: The results presented in this report are for nine Precipitate Hydrolysis Aqueous (PHA) Phase 4 glasses. Three of the glasses contained HM sludge at 22, 26, and 30 wt% respectively, 10 wt% PHA and 1.25 wt% monosodium titanate (MST), all on an oxide basis. The remaining six glasses were selected from the Phase 1 and Phase 2 studies (Purex sludge) but with an increased amount of MST. The high-end target for MST of 2.5 wt% oxide was missed in Phases 1 and 2 due to {approximately}30 wt% water conten… more
Date: January 25, 2000
Creator: Edwards, T. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

CRADA Final Report for CRADA Number ORNL00-0605: Advanced Engine/Aftertreatment System R&D

Description: Navistar and ORNL established this CRADA to develop diesel engine aftertreatment configurations and control strategies that could meet emissions regulations while maintaining or improving vehicle efficiency. The early years of the project focused on reducing the fuel penalty associated with lean NOx trap (LNT), also known as NOx adsorber catalyst regeneration and desulfation. While Navistar pursued engine-based (in-cylinder) approaches to LNT regeneration, complementary experiments at ORNL focu… more
Date: October 1, 2011
Creator: Pihl, Josh A; West, Brian H; Toops, Todd J; Adelman, Brad & Derybowski, Edward
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Depth Dependence of the Mechanical Properties of Human Enamel by Nanoindentation

Description: Nanoindentation has recently emerged to be the primary method to study the mechanical behavior and reliability of human enamel. Its hardness and elastic modulus were generally reported as average values with standard deviations that were calculated from the results of multiple nanoindentation tests. In such an approach, it is assumed that the mechanical properties of human enamel are constant, independent of testing parameters, like indent depth and loading rate. However, little is known if the… more
Date: February 17, 2006
Creator: Zhou, J & Hsiung, L L
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
Back to Top of Screen