Search Results

open access

0. 20-m (8-in.) Primary Burner Development Report

Description: High-Temperature Gas-Cooled Reactors (HTGRs) utilize graphite-base fuels. Fluidized-bed burners are being employed successfully in the experimental reprocessing of these fuels. The primary fluidized-bed burner is a unit operation in the reprocessing flowsheet in which the graphite moderator is removed. A detailed description of the development status of the 0.20-m (8-in.) diameter primary fluidized-bed burner as of July 1, 1977 is presented. Experimental work to date performed in 0.10; 0.20; an… more
Date: December 1977
Creator: Stula, R. T.; Young, D. T. & Rode, J. S.
Partner: UNT Libraries Government Documents Department
open access

1-1/2-Loop Semiscale Isothermal Test Program: Program and System Description in Support of Experiment Data Reports.

Description: The isothermal test series is part of the Semiscale Blowdown and Emergency Core Cooling (ECC) Project conducted by Aerojet Nuclear Company for the U. S. Atomic Energy Commission. The test series consisted of ten blowdown tests and five hot-wall tests with emphasis on emergency core coolant delivery. The blowdown tests were conducted to investigate the effects of lower plenum geometry, heat transfer configuration, ECC injection location, downcomer gap size, and break size.
Date: February 1, 1974
Creator: Aerojet Nuclear Company
Partner: UNT Libraries Government Documents Department
open access

1/2/Sup +/. -->. 1/2/Sup -/ Beta Decay of /Sup 19/Ne and the Parity Nonconserving Nn Force

Description: A branching ratio of (1.20 +- 0.20) x 10/sup -4/ is obtained for the ..beta../sup +/ decay of /sup 19/Ne to the 110 keV 1/2/sup -/ level of /sup 19/F. This transition (presumably dominated by the ..delta..J/sup ..pi../ = 0/sup -/ axial charge operator) provides a crucial test of wavefunctions used in interpreting the parity mixing of the ground and 110 keV levels of /sup 19/F. These wavefunctions, which yield a parity mixing larger than that observed experimentally, also predict too large a ..b… more
Date: 1978~
Creator: Adelberger, E. G.; Hindi, M. M.; Hoyle, C. D.; Swanson, H. E. & Von Lintig, R. D.
Partner: UNT Libraries Government Documents Department
open access

1,3,5-trichlorobenzene progress report, July--September 1976

Description: Research progress is reported on the following topics: (1) conversion of 2, 4, 6-trichloroaniline to 2, 4, 6-trichloronitrobenzene; (2) nitration of 1, 2, 4-trichlorobenzene; (3) exploration of the route to 1, 3, 5-trichlorobenzene via aniline; and (4) direct nitration of trichloroaniline. (TFD)
Date: September 1, 1976
Creator: Estes, Z. L.
Partner: UNT Libraries Government Documents Department
open access

E-1 CAM Revision 4

Description: this report is a descriptive journey of the E-1 CAM Revision 4
Date: April 30, 1970
Partner: UNT Libraries Government Documents Department
open access

1 - FFTF-LMFBR seal test program, July-September 1974

Description: The objectives of the general seal test program are to: (1) conduct static and dynamic tests to demonstrate or determine the mechanical performance of full-size (cross-section) FFTF fuel transfer machine and reactor vessel head seals intended for use in a sodium vapor - inert gas environment, (2) demonstrate that these FFTF seals or new seal configurations provide acceptable fission product and cover gas retention capabilities at Clinch River Breeder Reactor Plant (CRBRP) operating environmenta… more
Date: January 1, 1974
Creator: Kurzeka, W. & Oliva, R.
Partner: UNT Libraries Government Documents Department
open access

1-GWh diurnal load-leveling Superconducting Magnetic Energy Storage system reference design

Description: A point reference design has been completed for a 1-GWh Superconducting Magnetic Energy Storage system. The system is for electric utility diurnal load-leveling but can also function to meet much faster power demands including dynamic stabilization. This study explores several concepts of design not previously considered in the same detail as treated here. Because the study is for a point design, optimization in all respects is not complete. This report examines aspects of the coil, the superco… more
Date: September 1, 1979
Creator: Rogers, J. D.; Hassenzahl, W. V. & Schermer, R. I. (comps.)
Partner: UNT Libraries Government Documents Department
open access

1-GWh diurnal load-leveling superconducting magnetic energy storage system reference design. Appendix A: energy storage coil and superconductor

Description: The technical aspects of a 1-GWh Superconducting Magnetic Energy Storage (SMES) coil for use as a diurnal load-leveling device in an electric utility system are presented. The superconductor for the coil is analyzed, and costs for the entire coil are developed.
Date: September 1, 1979
Creator: Schermer, R.I.
Partner: UNT Libraries Government Documents Department
open access

1-GWh diurnal load-leveling superconducting magnetic energy storage system reference design. Appendix B: cost study, high-purity aluminum production

Description: Cost information is supplied for aluminum with purities of 200, 2000, and 5000 residual resistivity ratio. Two production situations were used for each purity: (1) 1 x 10/sup 6/ kg/yr production rate with a 30-yr sustaining market and (2) 1 x 10/sup 6/ kg/yr production rate for 2 yrs only. These productions and purities are of interest for manufacturing devices for Superconducting Magnetic Energy Storage. The cost study results are presented as a range and include (1) the selling price of the a… more
Date: September 1, 1979
Creator: Cochran, C. N.; Dawless, R. K. & Whitchurch, J. B.
Partner: UNT Libraries Government Documents Department
open access

1-GWh diurnal load-leveling superconducting magnetic energy storage system reference design. Appendix C: dewar and structural support

Description: The mechanical aspects of the dewar to contain a 1-GWh superconducting coil in a 1.8 K helium bath and the means for supporting the coil and dewar against the rock of an underground excavation created for just that purpose are presented.
Date: September 1, 1979
Creator: Bennett, J. G. & Ju, F. D.
Partner: UNT Libraries Government Documents Department
open access

1-GWh diurnal load-leveling superconducting magnetic energy storage system reference design. Appendix D: superconductive magnetic energy storage cavern construction methods and costs

Description: The excavation and preparation of an underground cavern to contain a 1-GWh diurnal load-leveling Superconducting Magnetic Energy Storage (SMES) unit is examined. The cavern's principal function is to provide a rock structure for supporting the magnetic forces from the charged storage coil. Certain economic considerations indicate the refrigerator cold box for the helium system should also be underground. The study includes such a provision and considers, among other things, rock bolting, water … more
Date: September 1, 1979
Partner: UNT Libraries Government Documents Department
open access

S-1 project. Volume I. Architecture. 1979 annual report

Description: The US Navy is one of the world's largest users of digital computing equipment having a procurement cost of at least $50,000, and is the single largest such computer customer in the Department of Defense. Its projected acquisition plan for embedded computer systems during the first half of the 80s contemplates the installation of over 10,000 such systems at an estimated cost of several billions of dollars. This expenditure, though large, is dwarfed by the 85 billion dollars which DOD is project… more
Date: January 1, 1979
Partner: UNT Libraries Government Documents Department
open access

S-1 project. Volume II. Hardware. 1979 annual report

Description: This volume includes highlights of the design of the Mark IIA uniprocessor (SMI-2), and the SCALD II user's manual. SCALD (structured computer-aided logic design system) cuts the cost and time required to design logic by letting the logic designer express ideas as naturally as possible, and by eliminating as many errors as possible - through consistency checking, simulation, and timing verification - before the hardware is built. (GHT)
Date: January 1, 1979
Partner: UNT Libraries Government Documents Department
open access

2-mm microwave interferometer

Description: A 2-mm microwave interferometer has been developed, and phase shift measurements have been made on the Baseball II experiment. The interferometer system employs a 140-GHz receiver for double down conversion of the plasma signal to a 60-MHz, IF frequency. The 140-GHz references signal is also down-converted and compared with the plasma signal to provide the desired phase change of the signal passing through the plasma. A feedback voltage from a 60-MHz discriminator to a voltage-controlled oscill… more
Date: March 1, 1977
Creator: Futch, A. H. & Mortensen, W. K.
Partner: UNT Libraries Government Documents Department
open access

2-MW plasmajet facility thermal tests of concrete. [PWR and BWR]

Description: A test was made in the 2-Megawatt Plasmajet Facility to obtain experimental data relative to the thermal response of concrete to incident heat flux. 14.6 cm diameter by 8.0 cm long concrete cylinders were positioned in a supersonic flow of heated nitrogen from an arc heater. The end of the concrete cylinders impacted by the flow were subjected to heat fluxes in the range of 0.13 to 0.35 kW/cm/sup 2/. Measurements included cold wall surface heat flux and pressure distributions, surface and indep… more
Date: July 1, 1977
Creator: Goin, Kenneth L.
Partner: UNT Libraries Government Documents Department
open access

3-D nonlinear evolution of MHD instabilities

Description: The nonlinear evolution of ideal MHD internal instabilities is investigated in straight cylindrical geometry by means of a 3-D initial-value computer code. These instabilities are characterized by pairs of velocity vortex cells rolling off each other and helically twisted down the plasma column. The cells persist until the poloidal velocity saturates at a few tenths of the Alfven velocity. The nonlinear phase is characterized by convection around these essentially fixed vortex cells. For exampl… more
Date: March 1, 1977
Creator: Bateman, G.; Hicks, H. R. & Wooten, J. W.
Partner: UNT Libraries Government Documents Department
open access

3-D slug flow heat transfer analysis of coupled coolant cells in finite LMFBR bundles

Description: A three-dimensional single region slug flow heat transfer analysis for finite LMFBR rod bundles using a classical analytical solution method has been performed. According to the isolated single cell analysis, the results show that the peripheral clad temperature variation as well as the thermal entrance length are strongly dependent upon the degree of irregularity displayed by various coolant geometries. Since under the present LMFBR conditions, fully-developed temperature fields may hardly be … more
Date: February 1, 1978
Creator: Wong, C.N. & Wolf, L.
Partner: UNT Libraries Government Documents Department
open access

4-inch sample recovery canisters, Test Model D series. Final report, September 1969--May 1970

Description: Six tests were conducted on 4-Inch Test Model D Closures to develop an improved closure for the redesigned Sandia Recovery Canister (SRC). The first three closures tested used variations of the high explosive (HE) design used on the previous Model B (Second) Series (P64283). The last three units tested used variations of the HE design used in the Midi Mist Event SRC.
Date: 1970
Creator: Goode, P. L. & Neff, G. W.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen