49,244 Matching Results

Search Results

D-0 End Calorimeter Warm Tube/TeV Dry Air Purge

Description: This Engineering Note studies the design of the Dry Air Purge that is going to flow through the Warm Tube of the End Calorimeter of the D-O Calorimeter. The Tev tubes through the E.C. can be thought of as a cluster of concentric tubes: The Tev tube, the warm (vacuum vessel) tube, 15 layers of superinsulation, the cold (argon vessel) tube, and the Inner Hadronic center support tube. The Dry Air Purge will involve flowing Dry Air through the annular region between the Warm Tube and the Tev Beam Pipe. This air flow is intended to prevent condensation from forming in this region which could turn to ice under cryogenic temperatures. Any ice formed in this gap, could cause serious problems when these tubes are moved. The Air will flow through a Nylon Tube Fitting -1/4-inch I.D. to 1/8-inch male pipe thread (Cole Palmer YB-06465-15) see Drawing MC-295221 (Appendix A). This fitting will be attached to the Nylon 2-inch Tube-Wiper and Seal Assembly which is clamped to the ends of the Warm Tube (Appendix A). This note includes drawings and calculations that explain the setup of the Dry Air Purge and give the required information on the pressure drops through the setup. The Equations and properties used in the calculations were obtained from the Applied Fluid Dynamics Handbook by Robert D. Blevins and Fluid Dynamics Second Edition by Frank M. White.
Date: August 14, 1991
Creator: Leibfritz, J. R.
Partner: UNT Libraries Government Documents Department

D-0 North End Cap Calorimeter Cold Test Results

Description: The North endcap calorimeter vessel was recieved on July 1, 1990. A cooldown of the pressure vessel with liquid nitrogen was performed on July 10-11 to check the vessel's integrity. With the pressure vessel cold, the insulating vacuum was monitored for leaks. Through out the testing, the insulating vacuum remained good and the vessel passed the test. The cold test was carried out per the procedures of D-Zero engineering note 3740.220-EN-250. The test was very similar to the cold test performed on the Central Calorimeter in October of 1987. Reference D-Zero engineering notes 3740.210-EN-122, 3740.000-EN107, and 3740.210-EN-110 for information about the CC cold test. The insulating vacuum space was pumped on while equipment was being connected to the pressure vessel. Two hours after starting to pump with the blower the vacuum space pressure was at about 210 microns. Pumping on the vacuum space for the next 15 hours showed no progress and a leak detector was connected to the pumping line. A leak check showed a leak in a thermocouple feedthru on the vacuum space relief plate. After fixing the leak, the pressure dropped to 16 microns in less than one hour. A rate of rise test was performed starting at a pressure of 13 microns. The pressure rose to 39 microns within 8 minutes and then only rose to 43 microns in 2.5 hours (1.6 microns/hour). After all connections were made to the pressure vessel, a vacuum pump with an estimated effective pumping speed of about 70 scfm was valved on. The lowest pressure achieved after 2 days of pumping was 80 microns. Valving out the pump for 30 minutes resulted in a 5 micron per minute rate of rise. The rate of rise was considered acceptable since there were known leak paths through the bolts of the signal ...
Date: August 2, 1990
Creator: Michael, J.
Partner: UNT Libraries Government Documents Department

1,2-HOIQO--A highly versatile 1,2-HOPO analog

Description: A cyclic, bidentate hydroxamic acid binding unit based on an isoquinoline scaffold has been utilized for the synthesis of a hexadentate tripodal ligand based on the TREN backbone. This prototype for a new class of multidentate chelators forms mononuclear iron(III) complexes and one-dimensional coordination polymers with lanthanide(III) cations. The latter has been determined by single crystal X-ray analysis of the cerium species. The solid state structure in the monoclinic space group P2{sub 1}/c (C{sub 36}H{sub 34}CeN{sub 7}O{sub 11}, a = 12.341(2){angstrom}, b = 26.649(4){angstrom}, c = 10.621(2){angstrom}, {alpha} = {gamma} = 90{sup o}, {beta} = 96.753(3){sup o}, V = 3468.6(9) {angstrom}{sup 3}, Z = 4) exhibits a trigonal-dodecahedral environment around the cerium cation. The proof of concept for the versatility of the new scaffold has been shown by the modification of the crucial precursor 3-carboxyiso-coumarin through electrophilic aromatic substitutions to yield the corresponding chlorosulfonated and nitrated analogs.
Date: August 7, 2006
Creator: Seitz, Michael; Pluth, Michael D. & Raymond, Kenneth N.
Partner: UNT Libraries Government Documents Department

$1.6 Million in Savings Identified in Augusta Newsprint Assessment: Plant-Wide Assessment Summary--Forest Products (Fact Sheet)

Description: Augusta Newsprint and its partners conducted a systematic plant-wide assessment (PWA) to identify energy- and cost-saving opportunities at the company's plant in Augusta, Georgia. The assessment team identified$1.6 million in potential annual savings.
Date: August 1, 2003
Partner: UNT Libraries Government Documents Department

1-10 Mbar Laser-Driven Shocks Using the Janus Laser Facility

Description: We report preliminary results using the Lawrence Livermore National Laboratory (LLNL) Janus laser facility to generate high pressure laser-driven shocks in the 1-10 Mbar regime. These experiments address various issues, including shock steadiness, planarity, uniformity and low target preheat, important for making precision EOS measurements on a small (E < 250 J) laser facility. A brief description of the experimental techniques, target design and measurements will be given.
Date: August 10, 2001
Creator: Dunn, J.; Price, D. F.; Moon, S. J.; Cauble, R. C.; Springer, P. T. & Ng, A.
Partner: UNT Libraries Government Documents Department

1-D Equilibrium Discrete Diffusion Monte Carlo

Description: We present a new hybrid Monte Carlo method for 1-D equilibrium diffusion problems in which the radiation field coexists with matter in local thermodynamic equilibrium. This method, the Equilibrium Discrete Diffusion Monte Carlo (EqDDMC) method, combines Monte Carlo particles with spatially discrete diffusion solutions. We verify the EqDDMC method with computational results from three slab problems. The EqDDMC method represents an incremental step toward applying this hybrid methodology to non-equilibrium diffusion, where it could be simultaneously coupled to Monte Carlo transport.
Date: August 2000
Creator: Evans, T. M.; Urbatsch, T. J. & Lichtenstein, H.
Partner: UNT Libraries Government Documents Department

A 1-kW power demonstration from the advanced free electron laser

Description: This is the final report of a one-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The main objective of this project was to engineer and procure an electron beamline compatible with the operation of a 1-kW free-electron laser (FEL). Another major task is the physics design of the electron beam line from the end of the wiggler to the electron beam dump. This task is especially difficult because electron beam is expected to have 20 kW of average power and to simultaneously have a 25% energy spread. The project goals were accomplished. The high-power electron design was completed. All of the hardware necessary for high-power operation was designed and procured.
Date: August 1997
Creator: Sheffield, R. L.; Conner, C. A. & Fortgang, C. M.
Partner: UNT Libraries Government Documents Department

1: Mass asymmetric fission barriers for {sup 98}Mo; 2: Synthesis and characterization of actinide-specific chelating agents

Description: Excitation functions have been measured for complex fragment emission from the compound nucleus {sup 98}Mo, produced by the reaction of {sup 86}Kr with {sup 12}C. Mass asymmetric fission barriers have been obtained by fitting the excitation functions with a transition state formalism. The extracted barriers are {approximately} 5.7 MeV higher, on average, than the calculations of the Rotating Finite Range Model (RFRM). These data clearly show an isospin dependence of the conditional barriers when compared with the extracted barriers from {sup 90}Mo and {sup 94}Mo. Eleven different liquid/liquid extractants were synthesized based upon the chelating moieties 3,2-HOPO and 3,4-HOPO; additionally, two liquid/liquid extractants based upon the 1,2-HOPO chelating moiety were obtained for extraction studies. The Pu(IV) extractions, quite surprisingly, yielded results that were very different from the Fe(III) extractions. The first trend remained the same: the 1,2-HOPOs were the best extractants, followed closely by the 3,2-HOPOs, followed by the 3,4-HOPOs; but in these Pu(IV) extractions the 3,4-HOPOs performed much better than in the Fe(III) extractions. 129 refs.
Date: August 1, 1996
Creator: Veeck, A. C.
Partner: UNT Libraries Government Documents Department

A 2-MeV microwave thermionic gun

Description: A high-gradient, S-band microwave gun with a thermionic cathode is being developed in a collaborative effort by AET, Varian, and SSRL. A prototype design using an upgraded Varian dispenser cathode mounted with thermal isolation directly in the first half-cell of a 1-1/2 cell, side-coupled, standing-wave cavity has been fabricated and is being tested. Optimization of the cavity shape and beam formation was done using SUPERFISH, MASK, and PARMELA. An overview of design details, as well as the status of in-progress beam tests, will be presented. 9 refs., 6 figs.
Date: August 1, 1989
Creator: Tanabe, E.; Borland, M.; Green, M.C.; Miller, R.H.; Nelson, L.V.; Weaver, J.N. et al.
Partner: UNT Libraries Government Documents Department

2 Questions pertaining to DON-0133 and the non-BRAC Scenario (Portsmouth Naval Shipyard)

Description: 2 Questions pertaining to DON-0133 and the non-BRAC Senario (Portsmouth Naval Shipyard. Department of Defense Clearinghouse Response: DoD Clearinghouse reply to a letter from the BRAC Commission regarding 2 Questions pertaining to DON-0133 and the non-BRAC scenario (Portsmouth Naval Shipyard)
Date: August 12, 2005
Creator: United States. Department of Defense.
Partner: UNT Libraries Government Documents Department

N = 2 string amplitudes

Description: In physics, solvable models have played very important roles. Understanding a simple model in detail teaches us a lot about more complicated models in generic situations. Five years ago, C. Vafa and I found that the closed N = 2 string theory, that is a string theory with the N = 2 local supersymmetry on the worldsheet, is classically equivalent to the self-dual Einstein gravity in four spacetime dimensions. Thus this string theory is solvable at the classical level. More recently, we have examined the N = 2 string partition function for spacial compactifications, and computed it to all order in the string perturbation expansion. The fact that such computation is possible at all suggests that the N = 2 string theory is solvable even quantum mechanically.
Date: August 1, 1995
Creator: Ooguri, H.
Partner: UNT Libraries Government Documents Department

2$sup 0$K vacuum pumping system for Baseball II

Description: A vacuum pumping system that provides a cryo surface for condensing and freezing of H/sub 2/ gas is described. A closed-loop vacuum system was designed and built at Lawrence Livermore Laboratory to pump down the neutralizer LH/sub e/ dewar with a volurae of 350 l and the lambda point dewar with a LH/sub e/ volume of 250 l. Both of these dewars can be pumped down simultaneously or one at a time. 100% of the H/sub e/ gas is recovered free of contaminations. The vacuum pump can handle 340 SCFM of gas. The LH/sub e/ dewars are pumped down below the lambda point. This condition reduces the LH/sub e/ container wall temperature to 2.1 deg K giving a base pressure of 10/sup -13/ torr for H/sub 2/ gas/sup 2/. To attain a stable condition the LH /sub e/ baths are puuped down to 33 torr or lower to give a surface temperatare of about 2/sup 0/K/sup 3/. The Baseball II helium factlity is a close loop system. The H/sub e/ gas is recovered from all the LH/sub e/ usage point. This gas is accumulated in one of the two 8000 cu ft inflatable gas bags. The gas from the gas bags is compressed into storage tanks at 1800 psig. The gas is purified to 99.99999% and it is liquified at a rate of 100 liquid liters per hour. (auth)
Date: August 20, 1973
Creator: Denhoy, B.S.
Partner: UNT Libraries Government Documents Department

A 3-D adaptive mesh refinement algorithm for multimaterial gas dynamics

Description: Adaptive Mesh Refinement (AMR) in conjunction with high order upwind finite difference methods has been used effectively on a variety of problems. In this paper we discuss an implementation of an AMR finite difference method that solves the equations of gas dynamics with two material species in three dimensions. An equation for the evolution of volume fractions augments the gas dynamics system. The material interface is preserved and tracked from the volume fractions using a piecewise linear reconstruction technique. 14 refs., 4 figs.
Date: August 12, 1991
Creator: Puckett, E. G. & Saltzman, J. S.
Partner: UNT Libraries Government Documents Department

3-D Characterization of the Structure of Paper and Paperboard and Their Application to Optimize Drying and Water Removal Processes and End-Use Applications

Description: The three dimensional structure of paper materials plays a critical role in the paper manufacturing process especially via its impact on the transport properties for fluids. Dewatering of the wet web, pressing and drying will benefit from knowledge of the relationships between the web structure and its transport coefficients. The structure of the pore space within a paper sheet is imaged in serial sections using x-ray micro computed tomography. The three dimensional structure is reconstructed from these sections using digital image processing techniques. The structure is then analyzed by measuring traditional descriptors for the pore space such as specific surface area and porosity. A sequence of microtomographs was imaged at approximately 2 m intervals and the three-dimensional pore-fiber structure was reconstructed. The pore size distributions for both in-plane as well as transverse pores were measured. Significant differences in the in-plane (XY) and the transverse directions in pore characteristics are found and may help partly explain the different liquid and vapor transport properties in the in-plane and transverse directions. Results with varying sheet structures compare favorably with conventional mercury intrusion porosimetry data. Interestingly, the transverse pore structure appears to be more open with larger pore size distribution compared to the in plane pore structure. This may help explain the differences in liquid and vapor transport through the in plane and transverse structures during the paper manufacturing process and during end-use application. Comparison of Z-directional structural details of hand sheet and commercially made fine paper samples show a distinct difference in pore size distribution both in the in-plane and transverse direction. Method presented here may provide a useful tool to the papermaker to truly engineer the structure of paper and board tailored to specific end-use applications. The difference in surface structure between the top and bottom sides of the porous material, i.e. ...
Date: August 29, 2004
Creator: Shri Ramaswamy, University of Minnesota & B.V. Ramarao, State University of New York
Partner: UNT Libraries Government Documents Department


Description: 3-D hydrodynamic models are used by the Savannah River National Laboratory (SRNL) to simulate the transport of thermal and radionuclide discharges in coastal estuary systems. Development of such models requires accurate bathymetry, coastline, and boundary condition data in conjunction with the ability to rapidly discretize model domains and interpolate the required geospatial data onto the domain. To facilitate rapid and accurate hydrodynamic model development, SRNL has developed a pre- and post-processor application in a geospatial framework to automate the creation of models using existing data. This automated capability allows development of very detailed models to maximize exploitation of available surface water radionuclide sample data and thermal imagery.
Date: August 24, 2006
Creator: Bollinger, J; Alfred Garrett, A; Larry Koffman, L & David Hayes, D
Partner: UNT Libraries Government Documents Department

3-D Mapping Technologies for High Level Waste Tanks

Description: This research investigated four techniques that could be applicable for mapping of solids remaining in radioactive waste tanks at the Savannah River Site: stereo vision, LIDAR, flash LIDAR, and Structure from Motion (SfM). Stereo vision is the least appropriate technique for the solids mapping application. Although the equipment cost is low and repackaging would be fairly simple, the algorithms to create a 3D image from stereo vision would require significant further development and may not even be applicable since stereo vision works by finding disparity in feature point locations from the images taken by the cameras. When minimal variation in visual texture exists for an area of interest, it becomes difficult for the software to detect correspondences for that object. SfM appears to be appropriate for solids mapping in waste tanks. However, equipment development would be required for positioning and movement of the camera in the tank space to enable capturing a sequence of images of the scene. Since SfM requires the identification of distinctive features and associates those features to their corresponding instantiations in the other image frames, mockup testing would be required to determine the applicability of SfM technology for mapping of waste in tanks. There may be too few features to track between image frame sequences to employ the SfM technology since uniform appearance may exist when viewing the remaining solids in the interior of the waste tanks. Although scanning LIDAR appears to be an adequate solution, the expense of the equipment ($80,000-$120,000) and the need for further development to allow tank deployment may prohibit utilizing this technology. The development would include repackaging of equipment to permit deployment through the 4-inch access ports and to keep the equipment relatively uncontaminated to allow use in additional tanks. 3D flash LIDAR has a number of advantages over stereo vision, ...
Date: August 31, 2010
Creator: Marzolf, A. & Folsom, M.
Partner: UNT Libraries Government Documents Department

A 3-dimensional theory of free electron lasers

Description: In this paper, we present an analytical three-dimensional theory of free electron lasers. Under several assumptions, we arrive at an integral equation similar to earlier work carried out by Ching, Kim and Xie, but using a formulation better suited for the initial value problem of Coherent Electron Cooling. We use this model in later papers to obtain analytical results for gain guiding, as well as to develop a complete model of Coherent Electron Cooling.
Date: August 23, 2010
Creator: Webb, S.D.; Wang, G. & Litvinenko, V.N.
Partner: UNT Libraries Government Documents Department