Search Results

open access

The Use of Geared Spring Tabs for Elevator Control

Description: Report discussing the use of two types of geared spring tabs for elevator control: ordinary (or ungeared) spring tabs and geared spring tabs. Their use in airplanes of various sizes and in comparison to conventional control systems is described.
Date: February 1945
Creator: Phillips, William H.
Partner: UNT Libraries Government Documents Department
open access

Progress Summary Number 1: Mechanical Properties of Flush-Riveted Joints Submitted by Five Airplane Manufacturers

Description: Summary presenting information on flush-riveted joints for aircraft construction, including the strength, occurrence of defects, and effect of the angle of rivet head. The current tests covers specimens from 15 manufacturers of which 5 series have been completed and are described in this report.
Date: February 1942
Creator: Brueggeman, William Charles
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of Four NACA Airfoil Sections Designed for Helicopter Rotor Blades

Description: "The purpose of the present work is to extend the previous investigation and to derive additional airfoil sections designed to minimize the undesirable characteristics of the previously tested airfoils. The tests of these additional airfoils were made in the Langley two-dimensional low-turbulence tunnel (LTT)" (p. 2).
Date: February 1946
Creator: Stivers, Louis S., Jr. & Rice, Fred J., Jr.
Partner: UNT Libraries Government Documents Department
open access

Comparative Tests of the Strength and Tightness of Commercial Flush Rivets of One Type and NACA Flush Rivets in Machine-Countersunk and Counterpunched Joints

Description: Report discusses an investigation that was conducted to compare the strength and tightness of machine-countersunk flush-riveted joints assembled with NACA flush rivets and a type of commercial flush rivet. A comparison was also generated between the strength and tightness of counterpunched flush-riveted joints assembled with the same types of rivet. NACA's flush-riveted joints tended to be stronger and tighter than the commercial joints.
Date: February 1, 1944
Creator: Mandel, Merven W.
Partner: UNT Libraries Government Documents Department
open access

The belt method for measuring pressure distribution

Description: "The measurement of pressure distribution may be accomplished rapidly for any number of locations deemed necessary in model or full-scale investigations by use of the 'belt' method. Reasonable accuracy may be obtained by careful use of this method" (p. 1).
Date: February 1943
Creator: Corson, Blake W., Jr.
Partner: UNT Libraries Government Documents Department
open access

Some Notes on the Determination of the Stick-Free Neutral Point from Wind-Tunnel Data

Description: "Two graphical methods are presented for determining the stick-free neutral point, and they are extensions of the methods commonly used to determine the stick-free neutral point. A mathematical formula for computing the stick-free neutral point is also given. These methods may be applied to determine approximately the increase in tail size necessary to shift the neutral point (stick fixed or free) to any desired location on an airplane having inadequate longitudinal stability" (p. 1).
Date: February 1944
Creator: Schuldenfrei, Marvin
Partner: UNT Libraries Government Documents Department
open access

An analysis of the fatigue life of an airplane wing structure under overload conditions

Description: From Introduction: "Fatigue life expectancy in normal transport operations was investigated in reference 1 and was found to be of equal importance with single-gust life. The effect of overload operation of transport airplanes on the probability of encountering single critical gusts was investigated in reference 2 and the frequency of critical gusts was found to increase rapidly with overload. The effect of overload operation on fatigue strength, however, has not heretofore been evaluated, hence… more
Date: February 1946
Creator: Putnam, Abbott A. & Reisert, Thomas D.
Partner: UNT Libraries Government Documents Department
open access

The Landing Stability of a Powered Dynamic Model of a Flying Boat With a 30 Degree V-Step and With Two Depths of Transverse Step

Description: Report discusses tests conducted using a model of a four-engine long-range flying boat with a 30 degree V-step and two different transverse steps of comparable positions and depths. The limits of stability, landing speed, and landing characteristics of the different models are presented.
Date: February 1944
Creator: Parkinson, John B. & Land, Norman S.
Partner: UNT Libraries Government Documents Department
open access

Variation of Hydrodynamic Impact Loads With Flight-Path Angle for a Prismatic Float at 6 Degrees and 9 Degrees Trim and a 22-1/2 Degree Angle of Dead Rise

Description: Report discusses the results of testing "to determine the relationship between impact normal acceleration and flight-path angle for seaplanes landing in smooth water" (from Summary). The tests were done at high and low forward speeds and trims at 6 degrees and 9 degrees, a 22.5 degree angle of dead rise, and a gross weight of 1100 pounds. Information about the forces acting on the aircraft and maximum depth of immersion and trim is provided.
Date: February 1946
Creator: Batterson, Sidney A. & Stewart, Thelma
Partner: UNT Libraries Government Documents Department
open access

Variation of Hydrodynamic Impact Loads With Flight-Path Angle for a Prismatic Float at 3 Degree Trim and With a 22 1/2 Degree Angle of Dead Rise

Description: Report discusses the results of testing "to determine the relationship between impact normal acceleration and flight-path angle for seaplanes landing on smooth water" (from Summary). The testing was done with a model at high and low forward speeds at 3 degrees trim, a dead-angle rise of 22.5 degrees, and consistent weight.
Date: February 1945
Creator: Batterson, Sidney A.
Partner: UNT Libraries Government Documents Department
open access

Variation of Hydrodynamic Impact Loads With Flight-Path Angle for a Prismatic Float at 12 Degree Trim and With a 22-1/2 Degree Angle of Dead Rise

Description: Report discusses the results of testing "to determine the relationship between impact normal acceleration and flight-path angle for seaplanes landing on smooth water" (from Summary). The tests were performed at 12 degrees trim, 22.5 degree angle of dead rise, and a total weight of 1100 pounds. The effect on the maximum impact normal acceleration and the effects of immersion on acceleration are described.
Date: February 1946
Creator: Batterson, Sidney A.
Partner: UNT Libraries Government Documents Department
open access

Landing Characteristics of a Model of a Flying Boat With the Depth of Step Reduced to Zero by Means of a Retractable Planing Flap

Description: "A model of a flying boat was tested to determine the landing characteristics when the depth of the step was reduced to zero by means of a retractable planing flap on the forebody" (p. 4). The results of stability and resistance testing are presented.
Date: February 1944
Creator: Benson, James M. & Freihofner, Anton
Partner: UNT Libraries Government Documents Department
open access

Static-Pressure Error of an Airspeed Installation on an Airplane in High-Speed Dives and Pullouts

Description: "Tests were made in high-speed dives and pull-outs to determine, by combined radar-optical tracking equipment, the static-pressure error of an airspeed-head installation on a P-51B airplane." The equipment used and testing procedure are described. The variation of static-pressure error is provided for several ranges of airplane lift coefficient.
Date: February 1946
Creator: Zalovcik, John A. & Wood, Clotaire
Partner: UNT Libraries Government Documents Department
open access

Dilution of Exhaust-Gas Samples From a Multicylinder Engine Equipped With an Exhaust-Gas Collector

Description: Report discusses the results of an investigation to determine the effect of a collector ring on exhaust-gas sampling. The results of tests to determine the percentage by volume of exhaust gas from the collector ring are presented for several engine powers and speeds. The danger of air dilution from the breathing action of the engine is almost entirely eliminated by the use of a collector ring.
Date: February 1945
Creator: Butze, Helmut F.
Partner: UNT Libraries Government Documents Department
open access

Tests of Beams Having Webs With Large Circular Lightening Holes

Description: "Strength tests were made on two sets of beams having webs with large circular lightening holes. The main conclusion drawn from the tests is that allowable web stressed derived from pure shear tests and allowable flange stresses derived from compression tests cannot be applied in the design of beams without making corrections for interaction" (p. 1). Pure shear tests and beam tests were performed and the circumstances of failure were investigated.
Date: February 1944
Creator: Levin, L. Ross
Partner: UNT Libraries Government Documents Department
open access

Lead Susceptibility of Several Fuels as Determined in an Air-Cooled Aircraft-Engine Cylinder

Description: "In order to determine the lead susceptibility of several fuels, leaded and unleaded fuels from the same stock were blended and tested in a full-scale air-cooled aircraft-engine cylinder. The fuels were S-4 reference fuel, virgin-base stock, aviation alkylate, neohexane, and blends of 25-percent benzene with 75-percent virgin-base stock and 25-percent toluene with 75-percent virgin-base stock" (p. 1).
Date: February 1946
Creator: Stricker, Edward G. & Hensley, Reece V.
Partner: UNT Libraries Government Documents Department
open access

A Preignition Indicator for Aircraft Engines

Description: Report describes an electrical-relay circuit that uses cylinder thermocouples for indicating preignition or misfiring in an aircraft engine. The potential dangers of preignition and the importance of an easy-to-use, practical preignition indicator are provided. The operating principles of the indicator and a description of its functioning, calibration, and installation procedures are also included.
Date: February 1945
Creator: Dallas, Thomas & Harries, Myron L.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen