158 Matching Results

Search Results

Advanced search parameters have been applied.

Inelastic Neutron Cross Sections on Nuclei at FNAL

Description: Direct experimental measurements of the inelastic cross sections of neutrons on a variety of nuclei have been made at Fermi lab over the energy range from 50 to 350 GeV. These data may be used, together with nucleon-nucleon total cross sections measured through the same energy range, to justify and verify the interpretation of cosmic ray data on interaction mean free paths in air or iron in terms of nucleon-nucleon total cross sections at much higher energies.
Date: May 1, 1977
Creator: Jones, L.W.; /Michigan U. /Queen Mary, U. of London; Gustafson, H.R.; Longo, M.J.; Roberts, T.; Whalley, M. et al.
Partner: UNT Libraries Government Documents Department

Nanosecond-Timescale Intra-Bunch-Train Feedback for the Linear Collider: Results of the FONT2 Run

Description: We report on experimental results from the December 2003/January 2004 data run of the Feedback On Nanosecond Timescales (FONT) experiment at the Next Linear Collider Test Accelerator at SLAC. We built a second-generation prototype intra-train beam-based feedback system incorporating beam position monitors, fast analogue signal processors, a feedback circuit, fast-risetime amplifiers and stripline kickers. We applied a novel real-time charge-normalization scheme to account for beam current variations along the train. We used the system to correct the position of the 170-nanosecond-long bunchtrain at NLCTA. We achieved a latency of 53 nanoseconds, representing a significant improvement on FONT1 (2002), and providing a demonstration of intra-train feedback for the Linear Collider.
Date: May 11, 2005
Creator: Barlow, R.; Dufau, M.; Kalinin, A.; /Daresbury; Myatt, G.; Perry, C. et al.
Partner: UNT Libraries Government Documents Department

Proposal of the Next Incarnation of Accelerator Test Facility at KEK for the International Linear Collider

Description: To reach design luminosity, the International Linear Collider (ILC) must be able to create and reliably maintain nanometer size beams. The ATF damping ring is the unique facility where ILC emittances are possible. In this paper we present and evaluate the proposal to create a final focus facility at the ATF which, using compact final focus optics and an ILC-like bunch train, would be capable of achieving 37 nm beam size. Such a facility would enable the development of beam diagnostics and tuning methods, as well as the training of young accelerator physicists.
Date: May 27, 2005
Creator: Araki, S.; Hayano, H.; Higashi, Y.; Honda, Y.; Kanazawa, K.; Kubo, K. et al.
Partner: UNT Libraries Government Documents Department

Multi-Bunch Simulations of the ILC for Luminosity Performance Studies

Description: To study the luminosity performance of the International Linear Collider (ILC) with different design parameters, a simulation was constructed that tracks a multi-bunch representation of the beam from the Damping Ring extraction through to the Interaction Point. The simulation code PLACET is used to simulate the LINAC, MatMerlin is used to track through the Beam Delivery System and GUINEA-PIG for the beam-beam interaction. Included in the simulation are ground motion and wakefield effects, intra-train fast feedback and luminosity-based feedback systems. To efficiently study multiple parameters/multiple seeds, the simulation is deployed on the Queen Mary High-Throughput computing cluster at Queen Mary, University of London, where 100 simultaneous simulation seeds can be run.
Date: July 11, 2005
Creator: White, G.; /SLAC /Queen Mary, U. of London; Walker, N.; /DESY; Schulte, D. & /CERN
Partner: UNT Libraries Government Documents Department

Reconstruction of IP Beam Parameters at the ILC From Beamstrahlung

Description: The luminosity performance of the ILC will be very sensitive to the parameters of the colliding bunches. Only some of these parameters can be measured using planned instrumentation. This analysis aims to access some of the colliding beam parameters not available by other means and to improve on the resolution of those that are. GUINEA-PIG is used to simulate the beam-beam interactions and produce beamstrahlung radiation (e+/e- pairs and photons). These are tracked to a simulation of the low-angle Beam Calorimeter and a photon detector and event shapes are produced. A Taylor map is produced to transform from the event shapes to the simulated beam parameters. This paper reports on the progress of this analysis, examining the usefulness of the proposed fitting technique.
Date: July 11, 2005
Creator: White, G. & /SLAC /Queen Mary, U. of London
Partner: UNT Libraries Government Documents Department

Electro-Weak Penguin and Leptonic Decays in BaBar

Description: Electro-weak penguin and leptonic decays provide an indirect probe for physics beyond the Standard Model and contribute to the determination of Standard Model parameters. Copious quantities of B mesons produced at the B-Factories permit precision measurements of the electro-weak penguin decays and searches for leptonic decays. We review the current experimental status of b {yields} s(d){gamma}, B{sup 0} {yields} D*{sup 0}{gamma}, b {yields} s{ell}{sup +}{ell}{sup -} and finally B{sup +} {yields} {tau}{sup +}{nu}{sub {tau}} decays at BABAR.
Date: September 8, 2005
Creator: Di Lodovico, F. & /Queen Mary, U. of London
Partner: UNT Libraries Government Documents Department

Relative Humidity in Limited Streamer Tubes for Stanford Linear Accelerator Center's BaBar Detector

Description: The BABAR Detector at the Stanford Linear Accelerator Center studies the decay of B mesons created in e{sup +}e{sup -} collisions. The outermost layer of the detector, used to detect muons and neutral hadrons created during this process, is being upgraded from Resistive Plate Chambers (RPCs) to Limited Streamer Tubes (LSTs). The standard-size LST tube consists of eight cells, where a silver-plated wire runs down the center of each. A large potential difference is placed between the wires and ground. Gas flows through a series of modules connected with tubing, typically four. LSTs must be carefully tested before installation, as it will be extremely difficult to repair any damage once installed in the detector. In the testing process, the count rate in most modules showed was stable and consistent with cosmic ray rate over an approximately 500 V operating range between 5400 to 5900 V. The count in some modules, however, was shown to unexpectedly spike near the operation point. In general, the modules through which the gas first flows did not show this problem, but those further along the gas chain were much more likely to do so. The suggestion was that this spike was due to higher humidity in the modules furthest from the fresh, dry inflowing gas, and that the water molecules in more humid modules were adversely affecting the modules' performance. This project studied the effect of humidity in the modules, using a small capacitive humidity sensor (Honeywell). The sensor provided a humidity-dependent output voltage, as well as a temperature measurement from a thermistor. A full-size hygrometer (Panametrics) was used for testing and calibrating the Honeywell sensors. First the relative humidity of the air was measured. For the full calibration, a special gas-mixing setup was used, where relative humidity of the LST gas mixture could be ...
Date: December 15, 2005
Creator: Lang, M.I.; /MIT; Convery, M.; /SLAC; Menges, W. & /Queen Mary, U. of London
Partner: UNT Libraries Government Documents Department

ATF2 Proposal Volume 2

Description: For achieving the high luminosity required at the International Linear Collider (ILC), it is critical to focus the beams to nanometer size with the ILC Beam Delivery System (BDS), and to maintain the beam collision with a nanometer-scale stability. To establish the technologies associated with this ultra-high precision beam handling, it has been proposed to implement an ILC-like final focus optics in an extension of the existing extraction beamline of ATF at KEK. The ATF is considered to be the best platform for this exercise, since it provides an adequate ultra-low emittance electron beam in a manner dedicated to the development of ILC. The two major goals for this facility, called ATF2, are: (A) Achievement of a 37 nm beam size, and (B) control of beam position down to 2 nm level. The scientific justification for the ATF2 project and its technical design have been described in Volume 1 of the ATF2 Proposal [1]. We present here Volume 2 of the ATF2 Proposal, in which we present specifics of the construction plans and the group organization to execute the research programs at ATF2. The sections in this report have been authored by relevant ATF2 subgroups within the International ATF Collaboration. The time line of the project is described in Section 2. Section 3 discuss the structure of the international collaboration. Sections 4 and 5 discuss budget considerations, which are presented as well as the design and construction tasks to be shared by the international collaboration at ATF2. Concluding remarks have been contributed by Dr. Ewan Paterson, Chair of the International Collaboration Board of the ATF collaboration.
Date: February 27, 2006
Creator: Grishanov, B.I.; Logachev, P.; Podgorny, F.; Telnov, V.; /Novosibirsk, IYF; Angal-Kalinin, D. et al.
Partner: UNT Libraries Government Documents Department

Tests of the FONT3 Linear Collider Intra-Train Beam Feedback System at the ATF

Description: We report preliminary results of beam tests of the FONT3 Linear Collider intra-train position feedback system prototype at the Accelerator Test Facility at KEK. The feedback system incorporates a novel beam position monitor (BPM) processor with a latency below 5 nanoseconds, and a kicker driver amplifier with similar low latency. The 56 nanosecond-long bunchtrain in the ATF extraction line was used to test the prototype BPM processor. The achieved latency will allow a demonstration of intra-train feedback on timescales relevant even for the CLIC Linear Collider design.
Date: March 14, 2006
Creator: Burrows, P.N.; Christian, G.; Clarke, C.; Hartin, A.; Dabiri Khah, H.; Molloy, S. et al.
Partner: UNT Libraries Government Documents Department

Combined Phase SpaceCharacterization at the PEP-II IP using Single-beam and Luminous-region Measurements

Description: We present a novel method to characterize the e{sup {+-}} phase space at the IP of the SLAC B-factory, that combines single-beam measurements with a detailed mapping of luminous-region observables. Transverse spot sizes are determined in the two rings with synchrotron-light monitors and extrapolated to the IP using measured lattice functions. The specific luminosity, which is proportional to the inverse product of the overlap IP beam sizes, is continuously monitored using radiative/Bhabha events. The spatial variation of the luminosity and of the transverse-boost distribution of the colliding e{sup {+-}}, are measured using e{sup +}e{sup -} {yields} {mu}{sup +}{mu}{sup -} events reconstructed in the BABAR detector. The combination of these measurements provide constraints on the emittances, horizontal and vertical spot sizes, angular divergences and {beta} functions of both beams at the IP during physics data-taking. Preliminary results of this combined spot-size analysis are confronted with independent measurements of IP {beta}-functions and overlap IP beam sizes at low beam current.
Date: June 23, 2006
Creator: Bevan, A.; /Queen Mary, U. of London; Kozanecki, W.; /Saclay; Viaud, B.; U., /Montreal et al.
Partner: UNT Libraries Government Documents Department

The Super Flavor Factory

Description: The main physics goals of a high luminosity e{sup +}e{sup -} flavor factory are discussed, including the possibilities to perform detailed studies of the CKM mechanism of quark mixing, and constrain virtual Higgs and Non-Standard Model particle contributions to the dynamics of rare B{sub u,d,s} decays. The large samples of D mesons and {tau} leptons produced at a flavor factory will result in improved sensitivities on D mixing and lepton flavor violation searches, respectively. One can also test fundamental concepts such as lepton universality to much greater precision than existing constraints and improve the precision on tests of CPT from B meson decays. Recent developments in accelerator physics have demonstrated the feasibility to build an accelerator that can achieve luminosities of {Omicron}(10{sup 36} cm{sup -2} s{sup -1}).
Date: January 26, 2007
Creator: Bevan, A.J. & /Queen Mary, U. of London
Partner: UNT Libraries Government Documents Department

Design of the ILC Prototype FONT4 Digital Intra-Train Beam-Based Feedback System

Description: We present the design of the FONT4 digital intra-train beam position feedback system prototype and preliminary results of initial beam tests at the Accelerator Test Facility (ATF) at KEK. The feedback system incorporates a fast analogue beam position monitor (BPM) front-end signal processor, a digital feedback board, and a kicker driver amplifier. The short bunchtrain, comprising 3 electron bunches separated by c. 150ns, in the ATF extraction line was used to test components of the prototype feedback system.
Date: April 16, 2007
Creator: Burrows, P.; /Queen Mary, U. of London; Christian, G.B.; Hartin, A.F.; Dabiri Khah, H.; White, G.R. et al.
Partner: UNT Libraries Government Documents Department

Performance of the FONT3 Fast Analogue Intra-Train Beam-Based Feedback System at ATF

Description: We report results of beam tests of the FONT3 intra-train position feedback system prototype at the Accelerator Test Facility (ATF) at KEK. The feedback system incorporates a novel beam position monitor (BPM) processor with latency below 5 nanoseconds, and a kicker driver amplifier with similar low latency. The 56 nanosecond-long bunchtrain in the ATF extraction line was used to test the prototype feedback system. The achieved latency of 23ns provides a demonstration of intra-train feedback on very short timescales relevant even for the CLIC Linear Collider design.
Date: April 16, 2007
Creator: Burrows, P.; /Queen Mary, U. of London; Christian, G.B.; Hartin, A.F.; Dabiri Khah, H.; White, G.R. et al.
Partner: UNT Libraries Government Documents Department

Improved Measurement of CP Violation in Neutral BDecays to \ccbar s

Description: The authors present updated measurements of time-dependent CP asymmetries in fully-reconstructed neutral B decays to several CP eigenstates containing a charmonium meson. The measurements use a data sample of (383 {+-} 4) x 10{sup 6} {Upsilon}(4S) {yields} B{bar B} decays collected with the BABAR detector at the PEP-II B factory. They determine sin2{beta} = 0.714 {+-} 0.032(stat) {+-} 0.018(syst) and |{lambda}| = 0.952 {+-} 0.022(stat) {+-} 0.017(syst).
Date: April 25, 2007
Creator: Aubert, B.; Bona, M.; Boutigny, D.; Karyotakis, Y.; Lees, J.P.; Poireau, V. et al.
Partner: UNT Libraries Government Documents Department

Measurement of Decay Amplitudes of B to (ccbar) K^* withan Angular Analysis, for (ccbar)=J/Psi,Psi(2S) and Chi_c1

Description: The authors perform the first three-dimensional measurement of the amplitudes of B {yields} {psi}(2S)K* and B {yields} {chi}{sub c1}K* decays and update the previous measurement B {yields} J/{psi}K*. They use a data sample collected with the BABAR detector at the PEP-II storage ring, corresponding to 232 million B{bar B} pairs. The longitudinal polarization of decays involving a J{sup PC} = 1{sup ++} {chi}{sub c1} meson is found to be larger than that with a 1{sup --} J/{psi} or {psi}(2S) meson. No direct CP-violating charge asymmetry is observed.
Date: April 25, 2007
Creator: Aubert, B.; Bona, M.; Boutigny, D.; Karyotakis, Y.; Lees, J.P.; Poireau, V. et al.
Partner: UNT Libraries Government Documents Department

Search for CP Violation in the Decays D0 to K- K+and D0 to pi- pi+

Description: We measure CP-violating asymmetries of neutral charmed mesons in the modes D{sup 0} {yields} K{sup -}K{sup +} and D{sup 0} {yields} {pi}{sup -}{pi}{sup +} with the highest precision to date by using D{sup 0} {yields} K{sup -}{pi}{sup +} decays to correct detector asymmetries. An analysis of 385.8 fb{sup -}1 of data collected with the BaBar detector yields values of a{sup KK}{sub CP} = (0.00 {+-} 0.34 (stat.) {+-} 0.13 (syst.))% and a{sup {pi}{pi}}{sub CP} = (-0.24 {+-} 0.52 (stat.) {+-} 0.22 (syst.))%, which agree with Standard Model predictions.
Date: September 24, 2007
Creator: Aubert, B.; Bona, M.; Boutigny, D.; Karyotakis, Y.; Lees, J.P.; Poireau, V. et al.
Partner: UNT Libraries Government Documents Department

Searches for the Decays B0 to l+- tau-+ and B+ to l+ nu(L=e,mu) using Hadronic Tag Reconstruction

Description: We present searches for the leptonic decays B{sup +} {yields} {ell}{sup +}{nu} and the lepton flavor violating decays B{sup 0} {yields} {ell}{sup {+-}}{tau}{sup {-+}}, where {ell} = e, {mu}, with data collected by the BABAR experiment at SLAC. This search demonstrates a novel technique in which we fully reconstruct the accompanying {bar B} in {Upsilon}(4S) {yields} B{bar B} events, and look for a monoenergetic lepton from the signal B decay. The signal yield is extracted from a fit to the signal lepton candidate momentum distribution in the signal B rest frame. Using a data sample of approximately 378 million B{bar B} pairs (342 fb{sup -1}), we find no evidence of signal in any of the decay modes. Branching fraction upper limits of {Beta}(B{sup +} {yields} e{sup +}{nu}) < 5.2 x 10{sup -6}, {Beta}(B{sup +} {yields} {mu}{sup +}{nu}) < 5.6 x 10{sup -6}, {Beta}(B{sup 0} {yields} e{sup +}{tau}{sup -}) < 2.8 x 10{sup -5} and {Beta}(B{sup 0} {yields} {mu}{sup +}{tau}{sup -}) < 2.2 x 10{sup -5}, are obtained at 90% confidence level.
Date: January 30, 2008
Creator: Aubert, Bernard; Bona, M.; Karyotakis, Y.; Lees, J.P.; Poireau, V.; Prudent, X. et al.
Partner: UNT Libraries Government Documents Department

B, D and K Decays

Description: The present report documents the results of Working Group 2: B, D and K decays, of the workshop on Flavor in the Era of the LHC, held at CERN from November 2005 through March 2007. With the advent of the LHC, we will be able to probe New Physics (NP) up to energy scales almost one order of magnitude larger than it has been possible with present accelerator facilities. While direct detection of new particles will be the main avenue to establish the presence of NP at the LHC, indirect searches will provide precious complementary information, since most probably it will not be possible to measure the full spectrum of new particles and their couplings through direct production. In particular, precision measurements and computations in the realm of flavor physics are expected to play a key role in constraining the unknown parameters of the Lagrangian of any NP model emerging from direct searches at the LHC. The aim of Working Group 2 was twofold: on one hand, to provide a coherent, up-to-date picture of the status of flavor physics before the start of the LHC; on the other hand, to initiate activities on the path towards integrating information on NP from high-p{sub T} and flavor data. This report is organized as follows. In Sec. 1, we give an overview of NP models, focusing on a few examples that have been discussed in some detail during the workshop, with a short description of the available computational tools for flavor observables in NP models. Sec. 2 contains a concise discussion of the main theoretical problem in flavor physics: the evaluation of the relevant hadronic matrix elements for weak decays. Sec. 3 contains a detailed discussion of NP effects in a set of flavor observables that we identified as 'benchmark channels' for NP ...
Date: March 7, 2008
Creator: Artuso, M.; Asner, D.M.; Ball, P.; Baracchini, E.; Bell, G.; Beneke, M. et al.
Partner: UNT Libraries Government Documents Department

Measurement of the tau- to eta pi-pi+pi-nu tau Branching Fraction and a Search for a Second-Class Current in the tau- to eta'(958)pi-nu tau Decay

Description: The {tau}{sup -} {yields} {eta}{pi}{sup -}{pi}{sup +}{pi}{sup -}{nu}{sub {tau}} decay with the {eta} {yields} {gamma}{gamma} mode is studied using 384 fb{sup -1} of data collected by the BABAR detector. The branching fraction is measured to be (1.60 {+-} 0.05 {+-} 0.11) x 10{sup -4}. It is found that {tau}{sup -} {yields} f{sub 1}(1285){pi}{sup -} {nu}{sub {tau}} {yields} {eta}{pi}{sup -}{pi}{sup +}{pi}{sup -}{nu}{sub {tau}} is the dominant decay mode with a branching fraction of (1.11 {+-} 0.06 {+-} 0.05) x 10{sup -4}. The first error on the branching fractions is statistical and the second systematic. In addition, a 90% confidence level upper limit on the branching fraction of the {tau}{sup -} {yields} {eta}{prime}(958){pi}{sup -}{nu}{sub {tau}} decay is measured to be 7.2 x 10{sup -6}. This last decay proceeds through a second-class current and is expected to be forbidden in the limit of isospin symmetry.
Date: March 24, 2008
Creator: Aubert, B.; Bona, M.; Boutigny, D.; Karyotakis, Y.; Lees, J.P.; Poireau, V. et al.
Partner: UNT Libraries Government Documents Department

Measurement of the Spin of the $\Xi(1530)$ Resonance

Description: The properties of the {Xi}(1530) resonance are investigated in the {Lambda}{sub c}{sup +} {yields} {Xi}{sup -}{pi}{sup +}K{sup +} decay process. The data sample was collected with the BABAR detector at the SLAC PEP-II asymmetric-energy e{sup +}e{sup -} collider operating at center of mass energies 10.58 and 10.54 GeV. The corresponding integrated luminosity is approximately 230 fb{sup -1}. The spin of the {Xi}(1530) is established to be 3/2. The existence of an S-wave amplitude in the {Xi}{sup -}{pi}{sup +} system is inferred, and its interference with the {Xi}(1530)0 amplitude provides the first clear demonstration of the Breit-Wigner phase motion expected for the {Xi}(1530). The P{sub 1}(cos {theta}{sub {Xi}{sup -}}) Legendre polynomial moment indicates the presence of a significant S-wave amplitude for {Xi}{sup -}{pi}{sup +} mass values above 1.6 GeV/c{sup 2}, and a dip in the mass distribution at approximately 1.7 GeV/c{sup 2} is interpreted as due to coherent addition of a {Xi}(1690){sup 0} contribution to this amplitude. This would imply J{sup P} = 1/2{sup -} for the {Xi}(1690). Attempts at fitting the {Xi}(1530){sup 0} lineshape yield unsatisfactory results, and this failure is attributed to interference effects associated with the amplitudes describing the K{sup +}{pi}{sup +} and/or {Xi}{sup -}K{sup +} systems.
Date: March 25, 2008
Creator: Aubert, B.; Bona, M.; Karyotakis, Y.; Lees, J.P.; Poireau, V.; Prudent, X. et al.
Partner: UNT Libraries Government Documents Department

Observation of B^+\to\eta\rho^+ and Search for B^0 Decays to\eta^\prime\eta, \eta\pi^0, \eta^\prime\pi^0, and \omega\pi^0

Description: The authors present measurements of branching fractions for five B-meson decays to two-body charmless final states. The data, collected with the BABAR detector at the Stanford Linear Accelerator Center, represent 459 million B{bar B} pairs. The results for branching fractions are, in units of 10{sup -6} (upper limits at 90% C.L.): {Beta}(B{sup +} {yields} {eta}{rho}{sup +}) = 9.9 {+-} 1.2 {+-} 0.8, {Beta}(B{sup 0} {yields} {eta}{prime}{eta}) = 0.5 {+-} 0.4 {+-} 0.1 (< 1.2), {Beta}(B{sup 0} {yields} {eta}{pi}{sup 0}) = 0.9 {+-} 0.4 {+-} 0.1 (< 1.5), {Beta}(B{sup 0} {yields} {eta}{prime}{pi}{sup 0}) = 0.9 {+-} 0.4 {+-} 0.1 (< 1.5), and {Beta}(B{sup 0}{sup 0} {yields} {omega}{pi}{sup 0}) = {eta}{rho}{sup +} mode, they measure the charge asymmetry {Alpha}{sub ch} (B{sup +} {yields} {eta}{rho}{sup +}) = 0.13 {+-} 0.11 {+-} 0.02.
Date: April 22, 2008
Creator: Aubert, Bernard; Bona, Marcella; Karyotakis, Y.; Lees, J.P.; Poireau, V.; Prencipe, E. et al.
Partner: UNT Libraries Government Documents Department

Measurements of B to {pi, eta, eta'} l nu Branching Fractions andDetermination of |Vub| with Semileptonically Tagged B Mesons

Description: The authors report measurements of branching fractions for the decays B {yields} P{ell}{nu}{sub {ell}}, where P are the pseudoscalar charmless mesons {pi}{sup -}, {pi}{sup 0}, {eta} and {eta}{prime}, based on 348 fb{sup -1} of data collected with the BABAR detector, using B{sup 0} and B{sup +} mesons found in the recoil of a second B meson decaying as B {yields} D{sup (*)}{ell}{nu}{sub {ell}}. Assuming isospin symmetry, they combine pionic branching fractions to obtain {Beta}(B{sup 0} {yields} {pi}{sup -} {ell}{sup +} {nu}{sub {ell}}) = (1.54 {+-} 0.17{sub (stat)} {+-} 0.09{sub (syst)}) x 10{sup -4}; they find 3.2{sigma} evidence of the decay B{sup +} {yields} {eta}{ell}{sup +}{nu}{sub {ell}} and measure its branching fraction to be (0.64 {+-} 0.20{sub (stat)} {+-} 0.3{sub (syst)}) x 10{sup -4}, and determine {Beta}(B{sup +} {yields} {eta}{prime}{ell}{sup +}{nu}{sub {ell}}) < 0.47 x 10{sup -4} to 90% confidence level. Using partial branching fractions for the pionic decays in ranges of the momentum transfer and a recent form factor calculation, they obtain the magnitude of the Cabibbo-Kobayashi-Maskawa matrix element |V{sub ub}| = (4.0 {+-} 0.5{sub (stat)} {+-} 0.2{sub (syst){sub -0.5}{sup +0.7}(theory)}) x 10{sup -3}.
Date: June 2, 2008
Creator: Aubert, B.; Bona, M.; Karyotakis, Y.; Lees, J.P.; Poireau, V.; Prencipe, E. et al.
Partner: UNT Libraries Government Documents Department