12,557 Matching Results

Search Results


Description: At-tank supplemental pretreatment including both filtration and small column ion exchange is currently under evaluation to facilitate salt waste retrieval and processing in the Hanford tank farms. Spherical resorcinol formaldehyde (sRF) resin is the baseline ion exchange resin for use in the Waste Treatment and Immobilization Plant (WTP). This document provides background and technical rationale to assist in determining whether spherical resorcinol formaldehyde (sRF) is also the appropriate ion exchange resin for supplemental LAW pretreatment processes and compares sRF with crystalline silicotitanate (CST) as potential supplemental pretreatment ion exchange media.
Date: December 28, 2010
Partner: UNT Libraries Government Documents Department

Final Report-Confirmatory Survey Results for the ABB Combustion Engineering Site, Windsor, Connecticut; Revision 1 (DCN 5158-SR-02-1) (Docket No. 030-03754; RFTA No. 12-003)

Description: The objectives of the confirmatory activities were to provide independent contractor field data reviews and to generate independent radiological data for use by the NRC in evaluating the adequacy and accuracy of the contractor�s procedures and FSS results. ORAU reviewed ABB CE�s decommissioning plan, final status survey plan, and the applicable soil DCGLs, which were developed based on an NRC-approved radiation dose assessment. The surveys included gamma surface scans, gamma direct measurements, and soil sampling.
Date: January 28, 2013
Creator: ADAMS, WADE C
Partner: UNT Libraries Government Documents Department


Description: This report describes a new heavy ion pre-injector for the Relativistic Heavy Ion Collider (RHIC) based on a high charge state Electron Beam Ion Source (EBIS), a Radio Frequency Quadrupole (RFQ) accelerator, and a short Linac. The highly successful development of an EBIS at BNL now makes it possible to replace the present pre-injector that is based on an electrostatic Tandem with a reliable, low maintenance Linac-based pre-injector. Linac-based pre-injectors are presently used at most accelerator and collider facilities with the exception of RHIC, where the required gold beam intensities could only be met with a Tandem until the recent EBIS development. EBIS produces high charge state ions directly, eliminating the need for the two stripping foils presently used with the Tandem. Unstable stripping efficiencies of these foils are a significant source of luminosity degradation in RHIC. The high reliability and flexibility of the new Linac-based pre-injector will lead to increased integrated luminosity at RHIC and is an essential component for the long-term success of the RHIC facility. This new pre-injector, based on an EBIS, also has the potential for significant future intensity increases and can produce heavy ion beams of all species including uranium beams and, as part of a future upgrade, might also be used to produce polarized {sup 3}He beams. These capabilities will be critical to the future luminosity upgrades and electron-ion collisions in RHIC. The new RFQ and Linac that are used to accelerate beams from the EBIS to an energy sufficient for injection into the Booster are both very similar to existing devices already in operation at other facilities. Injection into the Booster will occur at the same location as the existing injection from the Tandem.
Date: February 28, 2005
Partner: UNT Libraries Government Documents Department

An Order-of-Magnitude Estimation of Benzene Concentration in Saltstone Vault

Description: The contents of Tank 48 that include the tetraphenylborate (TPB) precipitates of potassium and cesium will be grouted and stored in the Saltstone vault. The grouting process is exothermic, which should accelerate the decomposition of TPB precipitates eventually to benzene. Because the vault is not currently outfitted with an active ventilation system, there is a concern that a mixture of flammable gases may form in the vapor space of each cell filled with the curing grout. The purpose of this study was to determine if passive breathing induced by the diurnal oscillations of atmospheric pressure would provide any mitigating measure against potential flammability. Specifically, it was requested that a set of algorithms be developed that would predict the equilibrium concentration of benzene as a function of benzene generation rate, fill height, and the amplitude of the barometric pressure oscillations. These algorithms were to be derived based on several simplifying assumptions so that order of magnitude estimates could be made quickly for scoping purposes. This memo documents the resulting algorithms along with those key assumptions made. These algorithms were then applied to simulate several test cases, including the baseline case where the cell was filled to the maximum height of 25 ft at the bulk benzene generation rate of 3.4 g/hr.
Date: February 28, 2005
Partner: UNT Libraries Government Documents Department

Operational Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer

Description: This document comprises the Operational Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer. The objective of the testing was to verify that all equipment and components functioned as designed following construction completion and turnover to operations.
Date: March 28, 2000
Creator: ANDREWS, J.E.
Partner: UNT Libraries Government Documents Department


Description: Reducing the airflow and heat input rates of a furnace that is connected to a duct system in thermal contact with unconditioned spaces can significantly reduce thermal distribution efficiency. This is a straightforward theoretical calculation based on the increased residence time of the air in the duct at the lower flow rate, which results in greater conduction losses. Experimental tests in an instrumented residential-size duct system have confirmed this prediction. Results are compared with the heat-loss algorithm in ASHRAE Standid 152P. The paper concludes with a discussion of possible remedies for this loss of efficiency in existing systems and optional design strategies in new construction.
Date: May 28, 2003
Creator: ANDREWS,J.W.
Partner: UNT Libraries Government Documents Department


Description: Recent strong experimental evidence of a narrow exotic S = +1 baryon resonance, {Theta}{sup +}, suggests the existence of other exotic baryons. We discuss the prospects of confirming earlier experimental evidence of {Theta}{sup +} and the observation of additional hypothetical exotic baryons in e{sup +}e{sup -} annihilations and {gamma}{gamma} collisions at LEP and B Factories.
Date: June 28, 2004
Partner: UNT Libraries Government Documents Department

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

Description: The Large Hadron Collider (LHC) at CERN promises a major step forward in the understanding of the fundamental nature of matter. The ATLAS experiment is a general-purpose detector for the LHC, whose design was guided by the need to accommodate the wide spectrum of possible physics signatures. The major remit of the ATLAS experiment is the exploration of the TeV mass scale where groundbreaking discoveries are expected. In the focus are the investigation of the electroweak symmetry breaking and linked to this the search for the Higgs boson as well as the search for Physics beyond the Standard Model. In this report a detailed examination of the expected performance of the ATLAS detector is provided, with a major aim being to investigate the experimental sensitivity to a wide range of measurements and potential observations of new physical processes. An earlier summary of the expected capabilities of ATLAS was compiled in 1999 [1]. A survey of physics capabilities of the CMS detector was published in [2]. The design of the ATLAS detector has now been finalised, and its construction and installation have been completed [3]. An extensive test-beam programme was undertaken. Furthermore, the simulation and reconstruction software code and frameworks have been completely rewritten. Revisions incorporated reflect improved detector modelling as well as major technical changes to the software technology. Greatly improved understanding of calibration and alignment techniques, and their practical impact on performance, is now in place. The studies reported here are based on full simulations of the ATLAS detector response. A variety of event generators were employed. The simulation and reconstruction of these large event samples thus provided an important operational test of the new ATLAS software system. In addition, the processing was distributed world-wide over the ATLAS Grid facilities and hence provided an important test of the ATLAS ...
Date: November 28, 2011
Creator: Aad, G.; Abat, E.; Abbott, B.; Abdallah, J.; Abdelalim, A. A.; Abdesselam, A. et al.
Partner: UNT Libraries Government Documents Department

Separation of Corn Fiber and Conversion to Fuels and Chemicals Phase II: Pilot-scale Operation

Description: The purpose of the Department of Energy (DOE)-supported corn fiber conversion project, “Separation of Corn Fiber and Conversion to Fuels and Chemicals Phase II: Pilot-scale Operation” is to develop and demonstrate an integrated, economical process for the separation of corn fiber into its principal components to produce higher value-added fuel (ethanol and biodiesel), nutraceuticals (phytosterols), chemicals (polyols), and animal feed (corn fiber molasses). This project has successfully demonstrated the corn fiber conversion process on the pilot scale, and ensured that the process will integrate well into existing ADM corn wet-mills. This process involves hydrolyzing the corn fiber to solubilize 50% of the corn fiber as oligosaccharides and soluble protein. The solubilized fiber is removed and the remaining fiber residue is solvent extracted to remove the corn fiber oil, which contains valuable phytosterols. The extracted oil is refined to separate the phytosterols and the remaining oil is converted to biodiesel. The de-oiled fiber is enzymatically hydrolyzed and remixed with the soluble oligosaccharides in a fermentation vessel where it is fermented by a recombinant yeast, which is capable of fermenting the glucose and xylose to produce ethanol. The fermentation broth is distilled to remove the ethanol. The stillage is centrifuged to separate the yeast cell mass from the soluble components. The yeast cell mass is sold as a high-protein yeast cream and the remaining sugars in the stillage can be purified to produce a feedstock for catalytic conversion of the sugars to polyols (mainly ethylene glycol and propylene glycol) if desirable. The remaining materials from the purification step and any materials remaining after catalytic conversion are concentrated and sold as a corn fiber molasses. Additional high-value products are being investigated for the use of the corn fiber as a dietary fiber sources.
Date: September 28, 2007
Creator: Abbas, Charles; Beery, Kyle; Orth, Rick & Zacher, Alan
Partner: UNT Libraries Government Documents Department


Description: A shearing tool was developed for remotely controlled severing of pipes or structural members. The shear is rotated about its axis in a wrist motion by the pumped hydraulic fluid that also powers the shear blade. It can be used in a stationary mounting or suspended from a crane. A C-shaped support for the shear was designed to pass through a small top opening of a shielded cell. The controls for manipulating the shear pass through or along the Cframe. The shear jaw opens to 5 in. in height and 7 in. in width, and the total weight of the tool is only 575 lb. It was used to cut metal sections 4 3/4 in. thick and 4-in. sched.-40 stainless steel pipe. (auth)
Date: December 28, 1961
Creator: Abbatiello, A.A.
Partner: UNT Libraries Government Documents Department

Evaluation of Ultra Clean Fuels from Natural Gas

Description: ConocoPhillips, in conjunction with Nexant Inc., Penn State University, and Cummins Engine Co., joined with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) in a cooperative agreement to perform a comprehensive study of new ultra clean fuels (UCFs) produced from remote sources of natural gas. The project study consists of three primary tasks: an environmental Life Cycle Assessment (LCA), a Market Study, and a series of Engine Tests to evaluate the potential markets for Ultra Clean Fuels. The overall objective of DOE's Ultra Clean Transportation Fuels Initiative is to develop and deploy technologies that will produce ultra-clean burning transportation fuels for the 21st century from both petroleum and non-petroleum resources. These fuels will: (1) Enable vehicles to comply with future emission requirements; (2) Be compatible with the existing liquid fuels infrastructure; (3) Enable vehicle efficiencies to be significantly increased, with concomitantly reduced CO{sub 2} emissions; (4) Be obtainable from a fossil resource, alone or in combination with other hydrocarbon materials such as refinery wastes, municipal wastes, biomass, and coal; and (5) Be competitive with current petroleum fuels. The objectives of the ConocoPhillips Ultra Clean Fuels Project are to perform a comprehensive life cycle analysis and to conduct a market study on ultra clean fuels of commercial interest produced from natural gas, and, in addition, perform engine tests for Fisher-Tropsch diesel and methanol in neat, blended or special formulations to obtain data on emissions. This resulting data will be used to optimize fuel compositions and engine operation in order to minimize the release of atmospheric pollutants resulting from the fuel combustion. Development and testing of both direct and indirect methanol fuel cells was to be conducted and the optimum properties of a suitable fuel-grade methanol was to be defined. The results of the study are also applicable to ...
Date: February 28, 2006
Creator: Abbott, Robert; Casey, Edward; Esen, Etop; Smith, Douglas; Burke, Bruce; Nguyen, Binh et al.
Partner: UNT Libraries Government Documents Department

Discovery of TeV Gamma-Ray Emission from the Cygnus Region

Description: The diffuse gamma radiation arising from the interaction of cosmic ray particles with matter and radiation in the Galaxy is one of the few probes available to study the origin of the cosmic rays. Milagro is a water Cherenkov detector that continuously views the entire overhead sky. The large field-of-view combined with the long observation time makes Milagro the most sensitive instrument available for the study of large, low surface brightness sources such as the diffuse gamma radiation arising from interactions of cosmic radiation with interstellar matter. In this paper we present spatial and flux measurements of TeV gamma-ray emission from the Cygnus Region. The TeV image shows at least one new source MGRO J2019+37 as well as correlations with the matter density in the region as would be expected from cosmic-ray proton interactions. However, the TeV gamma-ray flux as measured at {approx}12 TeV from the Cygnus region (after excluding MGRO J2019+37) exceeds that predicted from a conventional model of cosmic ray production and propagation. This observation indicates the existence of either hard-spectrum cosmic-ray sources and/or other sources of TeV gamma rays in the region.
Date: November 28, 2006
Creator: Abdo, A.A.; Allen, B.; Berley, D.; Blaufuss, E.; Casanova, S.; Chen, C. et al.
Partner: UNT Libraries Government Documents Department

Up-to-date p-p Interaction Modeling and Secondarygamma, e+/- and Neutrino Spectra in Astronomical Environment

Description: We have calculated spectra of stable secondary particles ({gamma}, e{sup {+-}}, {nu}{sub e}, {bar {nu}}{sub e}, {nu}{sub {mu}}{bar {nu}}{sub {mu}}) produced in high energy p-p interactions in astrophysical environment. The calculation has incorporated the up-to-date rising inelastic cross-sections, the diffraction dissociation process, and the Feynman scaling violation for the first time. We then found that the diffractive process makes secondary particle spectra harder than that of the incident proton; that the rising inelastic cross-section and the scaling violation produces significantly more secondary particles than previous calculations. Combination of the three features explain about a half of the ''GeV Excess'' in the EGRET Galactic diffuse {gamma}-ray spectrum with the local cosmic proton spectrum (power-law index around 2.7). The excess can be fully explained if the proton spectral index in the Galactic ridge is harder by 0.2 than above. As an extension of the calculation, we have parameterized the inclusive secondary particle spectra as functions of the incident proton kinetic energy: we predict {approx} 30% more e{sup +} and {nu}{sub e} than e{sup -} and {bar {nu}}{sub e} to be produced in the GeV range by p-p interactions.
Date: June 28, 2005
Creator: Abe, T.; Kamae, T.; Karlsson, N.; Koi, T.; Mizuno, T. & /SLAC
Partner: UNT Libraries Government Documents Department

[RE: School Board Award Announcement: Kennedy Center / NSBA]

Description: Photocopy of a letter from Julie Abel, Program Associate, Getty Center for Education in the Arts, to RIG Directors. The letter is in regard to information on the Kennedy Center Alliance for Arts Education Network, KCAAEN, and National School Boards Association, NSBA, Award that recognizes school boards that have demonstrated outstanding commitment to high quality arts education. Attached to the letter is a copy of the 1996 Award Announcement.
Date: August 28, 1995
Creator: Abel, Julie
Partner: UNT Libraries Special Collections

Summary of beryllium specifications, current and historical

Description: This report summarizes beryllium properties included in producer, Department of Energy, and government specifications. The specifications are divided into two major categories: current and historical. Within each category the data are arranged primarily according to increasing purity and secondarily by increasing tensile properties. Qualitative comments on formability and weldability are included. Also, short summaries of powder production and consolidation techniques are provided.
Date: December 28, 1990
Creator: Abeln, S.P. & Kyed, P.
Partner: UNT Libraries Government Documents Department

Isotopic Analysis of Boron as Trimethyl Borate

Description: Boron-impregnated polyethylene tape was irradiated in the Engineering Test Reactor Critical Facility to study the effect of boron as a burnable poison in reactor fuel. Isotopic analysis of the boron was performed with a conventional CEC Model 21-103 mass spectrometer. The tape was distilled off and the residual boron was converted to trimethyl borate. The reaction mixture was analyzed without separation. Good precision was obtained with samples containing less than 0.5 mg. boron. Features of the mass spectrum of trimethyl borate are discussed. Other applications of the method are suggested. (auth)
Date: January 28, 1960
Creator: Abernathey, R. M.
Partner: UNT Libraries Government Documents Department

Story of Surung Thuku recited by Abida

Description: Recording of Abida reciting “Surung Thuku” in the Nagar dialect of Burushaski. This popular story is told to kids. A man named Surung Thuku is taken captive by an evil grandmother who wishes to eat him, but he tricks her into eating her granddaughter instead, and escapes
Date: July 28, 2010
Creator: Abida
Partner: UNT College of Information