56,035 Matching Results

Search Results

Corrective Action Decision Document for Corrective Action Unit 423: Building 03-60 Underground Discharge Point, Tonopah Test Range, Nevada

Description: This Corrective Action Decision Document (CADD) has been prepared for Corrective Action Unit (CAU) 423, Building 03-60 Underground Discharge Point (UDP) in accordance with the Federal Facility Agreement and Consent Order (FFACO) of 1996 that was agreed to by the US Department of Energy, Nevada Operations Office (DOE/NV); the Nevada Division of Environmental Protection (NDEP); and the U.S Department of Defense (FFACO, 1996). The CADD provides or references the specific information necessary to recommend a preferred corrective action for the single Corrective Action Site (CAS), 03-02-002-0308, within CAU 423. Corrective Action Unit 423 is located at the Tonopah Test Range (TTR), Nevada. The TTR is approximately 255 kilometers (km) (140 miles[mi]) northwest of Las Vegas, Nevada. The UDP is approximately 73 meters (m) (240 feet [ft]) northwest of the northwest corner of Building 03-60, the Auto Maintenance Shop. Corrective Action Unit 423 is comprised of the UDP and an associated discharge line extending from Building 03-60. The UDP received waste oil products from the Auto Maintenance Shop, a light-duty fleet maintenance shop in the Area 3 compound, from 1965 to 1989 or 1990 (DOE/NV, 1997).
Date: June 19, 1999
Creator: /NV, DOE
Partner: UNT Libraries Government Documents Department

CORRRECTIVE ACTION DECISION DOCUMENT FOR CORRECTIVE ACTION UNIT 427: AREA 3 SEPTIC WASTE SYSTEMS 2 AND 6, TONOPAH TEST RANGE, NEVADA, REVISION 0, JUNE 1998

Description: This Corrective Action Decision Document has been prepared for the Area 3 Septic Waste Systems 2 and 6 (Corrective Action Unit 427) in accordance with the Federal Facility Agreement and Consent Order of 1996 (FFACO, 1996). Corrective Action Unit 427 is located at the Tonopah Test Range, Nevada, and is comprised of the following Corrective Action Sites, each an individual septic waste system (DOE/NV, 1996a): (1) Septic Waste System 2 is Corrective Action Site Number 03-05-002-SW02. (2) Septic Waste System 6 is Corrective Action Site Number 03-05-002-SW06. The purpose of this Corrective Action Decision Document is to identify and provide a rationale for the selection of a recommended corrective action alternative for each Corrective Action Site. The scope of this Correction Action Decision Document consists of the following tasks: (1) Develop corrective action objectives. (2) Identify corrective action alternative screening criteria. (3) Develop corrective action alternatives. (4) Perform detailed and comparative evaluations of the corrective action alternatives in relation to the corrective action objectives and screening criteria. (5) Recommend and justify a preferred corrective action alternative for each CAS. From November 1997 through January 1998, a corrective action investigation was performed as set forth in the Corrective Action Investigation Plan for Corrective Action Unit No. 427: Area 3 Septic Waste System Numbers 2 and 6, Tonopah Test Range, Nevada (DOE/NV, 1997b). Details can be found in Appendix A of this document. The results indicated that contamination is present in some portions of the CAU and not in others as described in Table ES-1 and shown in Figure A.2-2 of Appendix A. Based on the potential exposure pathways, the following corrective action objectives have been identified for Corrective Action Unit 427: (1) Prevent or mitigate human exposure to subsurface soils containing TPH at concentrations greater than 100 milligrams per kilogram (NAC, ...
Date: June 23, 1998
Creator: /NV, DOE
Partner: UNT Libraries Government Documents Department

Post-Closure Monitoring Report for Corrective Action Unit 329: Area 22 Desert Rock Airstrip Fuel Spill, Nevada Test Site, Nevada (Rev. No.: 0, June 2002)

Description: There was an increase in total petroleum hydrocarbons (TPH) concentrations at all three depths within Borehole DRA-0. The oxygen concentration at 40 ft below ground surface (bgs) decreased. There was also an increase in carbon dioxide concentration at that depth. The decrease in oxygen concentrations and the increase in carbon dioxide concentration at the 40 ft bgs level could be possible indicators of natural attenuation. It is not possible to determine trends or biodegradation rates with the limited amount of data collected from the site. The sample results from this first monitoring period did not correlate with the baseline results collected in August 2000. Additional samples will be collected and the results will be compared to previously collected samples to determine if the site was at equilibrium in August 2000. Continued annual monitoring will be conducted as specified in the Closure Report to determine trends at the site. As natural attenuation occurs, the TPH concentrations should decrease. The TPH concentrations will be compared over successive monitoring events to determine trends and approximate rates. As natural attenuation occurs, oxygen will be consumed and carbon dioxide will be produced. The oxygen, nitrogen, and carbon dioxide concentrations will also be evaluated to determine if biodegradation is indicated. When all available oxygen has been consumed, methane-producing bacteria may continue the natural attenuation process so methane levels will be monitored as an additional possible indicator of natural attenuation. The rate of decrease will be determined on the microbial populations, contaminant concentrations, available nutrients, and other environmental factors. Samples were collected and submitted for microbial analysis during closure activities. The results indicated that the microbial populations and nutrients were adequate for limited bioremediation (DOE/NV, 2000). Additional sampling for microbial analysis are not planned. The site is currently inactive and the source of additional contamination was removed. ...
Date: June 6, 2002
Creator: /NV, NNSA
Partner: UNT Libraries Government Documents Department

Advanced, Low/Zero Emission Boiler Design and Operation

Description: In partnership with the U.S. Department of Energy's National Energy Technology Laboratory, B&W and Air Liquide are developing and optimizing the oxy-combustion process for retrofitting existing boilers as well as new plants. The main objectives of the project is to: (1) demonstrate the feasibility of the oxy-combustion technology with flue gas recycle in a 5-million Btu/hr coal-fired pilot boiler, (2) measure its performances in terms of emissions and boiler efficiency while selecting the right oxygen injection and flue gas recycle strategies, and (3) perform technical and economic feasibility studies for application of the technology in demonstration and commercial scale boilers. This document summarizes the work performed during the period of performance of the project (Oct 2002 to June 2007). Detailed technical results are reported in corresponding topical reports that are attached as an appendix to this report. Task 1 (Site Preparation) has been completed in 2003. The experimental pilot-scale O{sub 2}/CO{sub 2} combustion tests of Task 2 (experimental test performance) has been completed in Q2 2004. Process simulation and cost assessment of Task 3 (Techno-Economic Study) has been completed in Q1 2005. The topical report on Task 3 has been finalized and submitted to DOE in Q3 2005. The calculations of Task 4 (Retrofit Recommendation and Preliminary Design of a New Generation Boiler) has been completed in 2004. In Task 6 (engineering study on retrofit applications), the engineering study on 25MW{sub e} unit has been completed in Q2, 2008 along with the corresponding cost assessment. In Task 7 (evaluation of new oxy-fuel power plants concepts), based on the design basis document prepared in 2005, the design and cost estimate of the Air Separation Units, the boiler islands and the CO{sub 2} compression and trains have been completed, for both super and ultra-supercritical case study. Final report of Task-7 is published ...
Date: June 30, 2007
Creator: /Wilcox, Babcock; Geological, Illinois State; Parsons, Worley & Group, Parsons Infrastructure /Technology
Partner: UNT Libraries Government Documents Department

Nuclear physics with a medium-energy Electron-Ion Collider

Description: A polarized ep/eA collider (Electron-Ion Collider, or EIC) with variable center-of-mass energy {radical}s {approx} 20-70 GeV and a luminosity {approx}10{sup 34} cm{sup -2} s{sup -1} would be uniquely suited to address several outstanding questions of Quantum Chromodynamics (QCD) and the microscopic structure of hadrons and nuclei: (i) the three-dimensional structure of the nucleon in QCD (sea quark and gluon spatial distributions, orbital motion, polarization, correlations); (ii) the fundamental color fields in nuclei (nuclear parton densities, shadowing, coherence effects, color transparency); (iii) the conversion of color charge to hadrons (fragmentation, parton propagation through matter, in-medium jets). We briefly review the conceptual aspects of these questions and the measurements that would address them, emphasizing the qualitatively new information that could be obtained with the collider. Such a medium-energy EIC could be realized at Jefferson Lab after the 12 GeV Upgrade (MEIC), or at Brookhaven National Lab as the low-energy stage of eRHIC.
Date: June 1, 2012
Creator: A. Accardi, V. Guzey, A. Prokudin, C. Weiss
Partner: UNT Libraries Government Documents Department

Prediction of Corrosion of Alloys in Mixed-Solvent Environments

Description: Corrosion is much less predictable in organic or mixed-solvent environments than in aqueous process environments. As a result, US chemical companies face greater uncertainty when selecting process equipment materials to manufacture chemical products using organic or mixed solvents than when the process environments are only aqueous. Chemical companies handle this uncertainty by overdesigning the equipment (wasting money and energy), rather than by accepting increased risks of corrosion failure (personnel hazards and environmental releases). Therefore, it is important to develop simulation tools that would help the chemical process industries to understand and predict corrosion and to develop mitigation measures. To create such tools, we have developed models that predict (1) the chemical composition, speciation, phase equilibria, component activities and transport properties of the bulk (aqueous, nonaqueous or mixed) phase that is in contact with the metal; (2) the phase equilibria and component activities of the alloy phase(s) that may be subject to corrosion and (3) the interfacial phenomena that are responsible for corrosion at the metal/solution or passive film/solution interface. During the course of this project, we have completed the following: (1) Development of thermodynamic modules for calculating the activities of alloy components; (2) Development of software that generates stability diagrams for alloys in aqueous systems; these diagrams make it possible to predict the tendency of metals to corrode; (3) Development and extensive verification of a model for calculating speciation, phase equilibria and thermodynamic properties of mixed-solvent electrolyte systems; (4) Integration of the software for generating stability diagrams with the mixed-solvent electrolyte model, which makes it possible to generate stability diagrams for nonaqueous or mixed-solvent systems; (5) Development of a model for predicting diffusion coefficients in mixed-solvent electrolyte systems; (6) Development of fundamentals of a detailed kinetic model of general corrosion, which includes a detailed treatment of local chemistry changes near ...
Date: June 5, 2003
Creator: A. Anderko, P. Wang, R. D. Young, D. P. Riemer, P. McKenzie and M. M. Lencka (OLI Systems Inc.) & Laboratory), S. S. Babu and P. Angelini (Oak Ridge National
Partner: UNT Libraries Government Documents Department

Development of combinatorial bacteria for metal and radionuclide bioremediation

Description: The grant concerned chromate [Cr(VI)] bioremediation and it was our aim from the outset to construct individual bacterial strains capable of improved bioremediation of multiple pollutants and to identify the enzymes suited to this end. Bacteria with superior capacity to remediate multiple pollutants can be an asset for the cleanup of DOE sites as they contain mixed waste. I describe below the progress made during the period of the current grant, providing appropriate context.
Date: June 15, 2006
Creator: A. C. Matin, Ph. D.
Partner: UNT Libraries Government Documents Department

Extending Performance and Evaluating Risks of PV Systems Failure Using a Fault Tree and Event Tree Approach: Analysis of the Possible Application

Description: Performance and reliability of photovoltaic (PV) systems are important issues in the overall evaluation of a PV plant and its components. While performance is connected to the amount of energy produced by the PV installation in the working environmental conditions, reliability impacts the availability of the system to produce the expected amount of energy. In both cases, the evaluation should be done considering information and data coming from indoor as well as outdoor tests. In this paper a way of re-thinking performance, giving it a probabilistic connotation, and connecting the two concepts of performance and reliability is proposed. The paper follows a theoretical approach and discusses the way to obtaining such information, facing benefits and problems. The proposed probabilistic performance accounts for the probability of the system to function correctly, thus passing through the complementary evaluation of the probability of system malfunctions and consequences. Scenarios have to be identified where the system is not functioning properly or at all. They are expected to be combined in a probabilistic safety analysis (PSA) based approach, providing not only the required probability, but also being capable of giving a prioritization of the risks and the most dominant scenario associated to a specific situation. This approach can offer the possibility to highlight the most critical parts of a PV system, as well as providing support in design activities identifying weak connections.
Date: June 3, 2012
Creator: A., Colli
Partner: UNT Libraries Government Documents Department

Prediction of atmospheric δ13CO2 using fossil plant tissues. Reviews of Geophysics, 46/2006RG0002.(view/download pdf)

Description: To summarize the content: we presented the results of laboratory experiments designed to quantify the relationship between plant tissue δ13C and δ13CO2 values under varying environmental conditions, including differential pCO2 ranging from 1 to 3 times today’s levels. As predicted, plants grown under elevated pCO2 showed increased average biomass compared to controls grown at the same temperature. Across a very large range in δ13Ca (≈ 24 ‰) and pCO2 (≈ 740 ppmv) we observed a consistent correlation between δ13Ca and δ13Cp (p<0.001). We show an average isotopic depletion of −25.4 ‰ for above-ground tissue and −23.2 ‰ for below-ground tissue of Raphanus sativus L. relative to the composition of the atmosphere under which it formed. For both above- and below-ground tissue, grown at both ~23 ˚C and ~29 ˚C, correlation was strong and significant (r2 ≥ 0.98, p<0.001); variation in pCO2 level had little or no effect on this relationship.
Date: June 30, 2008
Creator: A.H. Jahren, N.C. Arens and S.A. Harbeson
Partner: UNT Libraries Government Documents Department

EQUILIBRIUM AND STABILITY FOR THE ARIES COMPACT STELLERATOR REACTOR

Description: Equilibrium and ideal magnetohydrodynamic (MHD) stability studies are reported for Compact Stellarator (ARIES-CS) reactor design equilibria based on a scaled three-period NCSX configuration and a two-period quasi-axisymmetric variant, the MHH2 stellarator. With a stabilizing shell at about twice the minor radius, robustly stable equilibria up to {beta}=6% are achievable. Recent experiments raise questions as to the applicability of linear MHD stability in stellarators since the predicted stability limits appear to be significantly exceeded. A context for interpreting this question, consistent with tokamak experience, is discussed; both the equilibria and nonlinear consequences need to be more carefully considered. Nonlinear stability is analyzed by computing solutions with highly resolved discontinuities to effectively simulate current sheets and islands. This yields {beta} limits in better agreement with measured values.
Date: June 1, 2004
Creator: AD, TURNBULL; LL, LAO; WA, COOPER; GY, FU; P, GARABEDIAN; LP, KU et al.
Partner: UNT Libraries Government Documents Department

Evolution of Stress in ScD{sub 2}/Cr Thin Films Fabricated by Evaporation and High Temperature Reaction

Description: The stress of scandium dideuteride, ScD{sub 2}, thin films is investigated during each stage of vacuum processing including metal deposition via evaporation, reaction and cooldown. ScD{sub 2} films with thin Cr underlayers are fabricated on three different substrate materials: molybdenum-alumina cermet, single crystal sapphire and quartz. In all experiments, the evaporated Cr and Sc metal is relatively stress-free. However, reaction of scandium metal with deuterium at elevated temperature to form a stoichiometric dideuteride phase leads to a large compressive in-plane film stress. Compression during hydriding results from an increased atomic density compared with the as-deposited metal film. After reaction with deuterium, samples are cooled to ambient temperature, and a tensile stress develops due to mismatched coefficients of thermal expansion (CTE) of the substrate-film couple. The residual film stress and the propensity for films to crack during cooldown depends principally on the substrate material when using identical process parameters. Films deposited onto quartz substrates show evidence of stress relief during cooldown due to a large CTE misfit; this is correlated with crack nucleation and propagation within films. All ScD{sub 2} layers remain in a state of tension when cooled to 30 C. An in-situ, laser-based, wafer curvature sensor is designed and implemented for studies of ScD{sub 2} film stress during processing. This instrument uses a two-dimensional array of laser beams to noninvasively monitor stress during sample rotation and with samples stationary. Film stress is monitored by scattering light off the backside of substrates, i.e., side opposite of the deposition flux.
Date: June 1, 2001
Creator: ADAMS,DAVID P.; BROWN,LAURENCE E.; GOEKE,RONALD S.; ROMERO,JUAN A. & SILVA,ANDREW D.
Partner: UNT Libraries Government Documents Department