33,665 Matching Results

Search Results

Empirical Study of Ne in H-Mode Pedestal in DIII-D

Description: There is compelling empirical [1] and theoretical [2] evidence that the global confinement of H-mode discharges increases as the pedestal pressure or temperature increases. Therefore, confidence in the performance of future machines requires an ability to predict the pedestal conditions in those machines. At this time, both the theoretical and empirical understanding of transport in the pedestal are incomplete and are inadequate to predict pedestal conditions in present or future machines. Recent empirical results might be evidence of a fundamental relation between the electron temperature T{sub e} and electron density n{sub e} profiles in the pedestal. A data set from the ASDEX-Upgrade tokamak has shown that {eta}{sub e}, the ratio between the scale lengths of the n{sub e} and T{sub e} profiles, exhibits a value of about 2 throughout the pedestal, despite a large range of the actual density and temperature values [3]. Data from the DIII-D tokamak show that over a wide range of pedestal density, the width of the steep gradient region for the T{sub e} profile is about 1-2 times the corresponding width for the n{sub e} profile, where both widths are measured from the plasma edge [4]. Thus, the barrier in the density might form a lower limit for the barrier in the electron temperature.
Date: May 5, 2005
Creator: . Groebner, R J; Osborne, T H; Fenstermacher, M E; Leonard, A W; Mahdavi, M A; Snyder, P B et al.
Partner: UNT Libraries Government Documents Department

Overview of Low-Level Waste Disposal Operations at the Nevada Test Site

Description: The U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Environmental Management Program is charged with the responsibility to carry out the disposal of on-site and off-site generated low-level radioactive waste at the Nevada Test Site. Core elements of this mission are ensuring that disposal take place in a manner that is safe and cost-effective while protecting workers, the public, and the environment. This paper focuses on giving an overview of the Nevada Test Site facilities regarding currant design of disposal. In addition, technical attributes of the facilities established through the site characterization process will be further described. An update on current waste disposal volumes and capabilities will also be provided. This discussion leads to anticipated volume projections and disposal site requirements as the Nevada Test Site disposal operations look towards the future.
Date: February 1, 2007
Creator: /Navarro, DOE
Partner: UNT Libraries Government Documents Department

The Changing Adventures of Mixed Low-Level Waste Disposal at the Nevada Test Site

Description: After a 15-year hiatus, the United States Department of Energy (DOE) National Nuclear Security Administration Nevada Site Office (NNSA/NSO) began accepting DOE off-site generated mixed low-level radioactive waste (MLLW) for disposal at the Nevada Test Site (NTS) in December 2005. This action was predicated on the acceptance by the Nevada Division of Environmental Protection (NDEP) of a waste analysis plan (WAP). The NNSA/NSO agreed to limit mixed waste disposal to 20,000 cubic meters (approximately 706,000 cubic feet) and close the facility by December 2010 or sooner, if the volume limit is reached. The WAP and implementing procedures were developed based on Hanford’s system of verification to the extent possible so the two regional disposal sites could have similar processes. Since the NNSA/NSO does not have a breaching facility to allow the opening of boxes at the site, verification of the waste occurs by visual inspection at the generator/treatment facility or by Real-Time-Radiography (RTR) at the NTS. This system allows the NTS to effectively, efficiently, and compliantly accept MLLW for disposal. The WAP, NTS Waste Acceptance Criteria, and procedures have been revised based on learning experiences. These changes include: RTR expectations; visual inspection techniques; tamper-indicating device selection; void space requirements; and chemical screening concerns. The NNSA/NSO, NDEP, and the generators have been working together throughout the debugging of the verification processes. Additionally, the NNSA/NSO will continue to refine the MLLW acceptance processes and strive for continual improvement of the program.
Date: February 1, 2007
Creator: /Navarro/NSTec, DOE
Partner: UNT Libraries Government Documents Department

Scaled Experimental Modeling of VHTR Plenum Flows

Description: Abstract The Very High Temperature Reactor (VHTR) is the leading candidate for the Next Generation Nuclear Power (NGNP) Project in the U.S. which has the goal of demonstrating the production of emissions free electricity and hydrogen by 2015. Various scaled heated gas and water flow facilities were investigated for modeling VHTR upper and lower plenum flows during the decay heat portion of a pressurized conduction-cooldown scenario and for modeling thermal mixing and stratification (“thermal striping”) in the lower plenum during normal operation. It was concluded, based on phenomena scaling and instrumentation and other practical considerations, that a heated water flow scale model facility is preferable to a heated gas flow facility and to unheated facilities which use fluids with ranges of density to simulate the density effect of heating. For a heated water flow lower plenum model, both the Richardson numbers and Reynolds numbers may be approximately matched for conduction-cooldown natural circulation conditions. Thermal mixing during normal operation may be simulated but at lower, but still fully turbulent, Reynolds numbers than in the prototype. Natural circulation flows in the upper plenum may also be simulated in a separate heated water flow facility that uses the same plumbing as the lower plenum model. However, Reynolds number scaling distortions will occur at matching Richardson numbers due primarily to the necessity of using a reduced number of channels connected to the plenum than in the prototype (which has approximately 11,000 core channels connected to the upper plenum) in an otherwise geometrically scaled model. Experiments conducted in either or both facilities will meet the objectives of providing benchmark data for the validation of codes proposed for NGNP designs and safety studies, as well as providing a better understanding of the complex flow phenomena in the plenums.
Date: April 1, 2007
Creator: 15, ICONE
Partner: UNT Libraries Government Documents Department

Reduction of pertechnetate by acetohydroxamic acid: Formation of [TcNO(AHA)2(H2O)]+ and implications for the UREX process.

Description: Reductive nitrosylation and complexation of ammonium pertechnetate by acetohydroxamic acid has been achieved in aqueous nitric and perchloric acid solutions. The kinetics of the reaction depend on the relative concentrations of the reaction components and are accelerated at higher temperatures. The reaction does not occur unless conditions are acidic. Analysis of the x-ray absorption fine structure spectroscopic data is consistent with a pseudo-octahedral geometry with the linear Tc-N-O bond typical of technetium nitrosyl compounds, and electron spin resonance spectroscopy is consistent with a the d{sup 5} Tc(II) nitrosyl complex. The nitrosyl source is generally AHA, but may be augmented by products of reaction with nitric acid. The resulting low-valency trans-aquonitrosyl(diacetohydroxamic)-technetium(II) complex (1) is highly soluble in water, extremely hydrophilic, and is not extracted by tri-n-butylphosphate in a dodecane diluent. Its extraction properties are not pH-dependent; titration studies indicate a single species from pH 4.5 down to -0.6 (calculated). This molecule is resistant to oxidation by H{sub 2}O{sub 2}, even at high pH, and can undergo substitution to form other technetium nitrosyl complexes. The formation of 1 may strongly impact the fate of technetium in the nuclear fuel cycle.
Date: February 26, 2008
Creator: 1Harry Reid Center for Environmental Studies, Nuclear Science and Technology Division, University of Nevada, Las Vegas, Las Vegas, NV, 89154-4006; Gong, Cynthia-May S; Poineau, Frederic; Lukens, Wayne W & Czerwinski, Kenneth R.
Partner: UNT Libraries Government Documents Department


Description: Recent experiments in the DIII-D tokamak [J.L. Luxon, Nucl. Fusion 42,614 (2002)] have demonstrated high {beta} with good confinement quality under stationary conditions. Two classes of stationary discharges are observed--low q{sub 95} discharges with sawteeth and higher q{sub 95} without sawteeth. The discharges are deemed stationary when the plasma conditions are maintained for times greater than the current profile relaxation time. In both cases the normalized fusion performance ({beta}{sub N}H{sub 89P}/q{sub 95}{sup 2}) reaches or exceeds the value of this parameter projected for Q{sub fus} = 10 in the International Thermonuclear Experimental Reactor (ITER) design [R. Aymar, et al., Plasma Phys. Control. Fusion 44, 519 (2002)]. The presence of sawteeth reduces the maximum achievable normalized {beta}, while confinement quality (confinement time relative to scalings) is largely independent of q{sub 95}. Even with the reduced {beta} limit, the normalized fusion performance maximizes at the lowest q{sub 95}. Projections to burning plasma conditions are discussed, including the methodology of the projection and the key physics issues which still require investigation.
Date: October 1, 2003
Partner: UNT Libraries Government Documents Department

Focal Plane Metrology for the LSST Camera

Description: Meeting the science goals for the Large Synoptic Survey Telescope (LSST) translates into a demanding set of imaging performance requirements for the optical system over a wide (3.5{sup o}) field of view. In turn, meeting those imaging requirements necessitates maintaining precise control of the focal plane surface (10 {micro}m P-V) over the entire field of view (640 mm diameter) at the operating temperature (T {approx} -100 C) and over the operational elevation angle range. We briefly describe the hierarchical design approach for the LSST Camera focal plane and the baseline design for assembling the flat focal plane at room temperature. Preliminary results of gravity load and thermal distortion calculations are provided, and early metrological verification of candidate materials under cold thermal conditions are presented. A detailed, generalized method for stitching together sparse metrology data originating from differential, non-contact metrological data acquisition spanning multiple (non-continuous) sensor surfaces making up the focal plane, is described and demonstrated. Finally, we describe some in situ alignment verification alternatives, some of which may be integrated into the camera's focal plane.
Date: January 10, 2007
Creator: A Rasmussen, Andrew P.; Hale, Layton; Kim, Peter; Lee, Eric; Perl, Martin; Schindler, Rafe et al.
Partner: UNT Libraries Government Documents Department


Description: Elastic light scattering spectroscopy (ESS) has the potential to provide spectra that contain both morphological and chromophore information from tissue. We report on a preliminary study of this technique, with the hope of developing a method for diagnosis of highly-pigmented skin lesions, commonly associated with skin cancer. Four opossums were treated with dimethylbenz(a)anthracene to induce both malignant melanoma and benign pigmented lesions. Skin lesions were examined in vivo using both UV-visible and near infrared (NIR) ESS, with wavelength ranges of 330-900 nm and 900-1700 nm, respectively. Both portable systems used identical fiber-optic probe geometry throughout all of the measurements. The core diameters for illuminating and collecting fibers were 400 and 200 {micro}m, respectively, with center-to-center separation of 350 {micro}m. The probe was placed in optical contact with the tissue under investigation. Biopsies from lesions were analyzed by two standard histopathological procedures. Taking into account only the biopsied lesions, UV-visible ESS showed distinct spectral correlation for 11/13 lesions. The NIR-ESS correlated well with 12/13 lesions correctly. The results of these experiments showed that UV-visible and NIR-ESS have the potential to classify benign and malignant skin lesions, with encouraging agreement to that provided by standard histopathological examination. These initial results show potential for ESS based diagnosis of pigmented skin lesions, but further trials are required in order to substantiate the technique.
Date: January 1, 2001
Creator: A'AMAR, C.; LEY, R. & AL, ET
Partner: UNT Libraries Government Documents Department

Development of Advanced Wear and Corrosion Resistant Systems Through Laser Surface Alloying and Materials Processing

Description: The stability of tungsten carbide particles in iron-rich and nickel-rich liquid during the laser surface alloying (LSA) process was investigated. Kinetic calculations indicate a rapid dissolution of tungsten carbide particles in iron-rich liquid, as compared with the dissolution rate in nickel-rich liquid. Optical microscopy indicated a heterogeneous microstructure around the tungsten particles that is in agreement with concentration gradients predicted by kinetic calculation. The work demonstrates the applicability of computational thermodynamics and kinetic models for the LSA process.
Date: April 1, 2002
Creator: A, Babu S S Martukanitz R P Parks K D David S
Partner: UNT Libraries Government Documents Department

Unquenched Studies Using the Truncated Determinant Algorithm

Description: A truncated determinant algorithm is used to study the physical effects of the quark eigenmodes associated with eigenvalues below 420 MeV. This initial high statistics study focuses on coarse (6{sup 4}) lattices (with O(a{sup 2}) improved gauge action), light internal quark masses and large physical volumes. Three features of full QCD are examined: topological charge distributions, string breaking as observed in the static energy and the eta prime mass.
Date: November 29, 2001
Creator: A. Duncan, E. Eichten and H. Thacker
Partner: UNT Libraries Government Documents Department

Pressure-induced Breaking of Equilibrium Flux Surfaces in the W7AS Stellarator

Description: Calculations are presented for two shots in the W7AS stellarator which differ only in the magnitude of the current in the divertor control coil, but have very different values of experimentally attainable β (<β> ≈ 2.7% versus <β> ≈ 1.8%). Equilibrium calculations find that a region of chaotic magnetic field line trajectories fills approximately the outer 1/3 of the cross-section in each of these configurations. The field lines in the stochastic region are calculated to behave as if the flux surfaces are broken only locally near the outer midplane and are preserved elsewhere. The calculated magnetic field line diffusion coefficients in the stochastic regions for the two shots are consistent with the observed differences in the attainable β, and are also consistent with the differences in the reconstructed pressure profiles.
Date: April 24, 2007
Creator: A. Reiman, M.C. Zarnstorff, D. Monticello, A. Weller, J. Geiger, and the W7-AS Team
Partner: UNT Libraries Government Documents Department

Organic-Based ("Excitonic") Solar Cells

Description: The existing types of organic-based solar cells, including dye-sensitized solar cells (DSSCs), can be categorized by their photoconversion mechanism as excitonic solar cells, XSCs. Their distinguishing characteristic is that charge generation and separation are simultaneous and this occurs via exciton dissociation at a heterointerface. Electrons are photogenerated on one side of the interface and holes on the other. This results in fundamental differences between XSCs and conventional PV cells. For example, the open circuit photovoltage, Voc, in conventional cells is limited to less than the magnitude of the band bending, bi; however, Voc in XSCs is commonly greater than bi. A general theoretical description is employed to quantify the differences between conventional and excitonic cells. The key difference is the dominant importance, in XSCs, of the photoinduced chemical potential energy gradient, ..delta..hn, whereas ..delta..hn is unimportant, and therefore neglected, in theoretical descriptions of conventional PV cells. Several examples are provided.
Date: May 1, 2003
Creator: A., Gregg. B.
Partner: UNT Libraries Government Documents Department


Description: Recent highlights in CP violation phenomena, are reviewed. B-factory results imply that, CP-violation phase in the CKM matrix is the dominant contributor to the observed CP violation in K and B-physics. Deviations from the predictions of the CKM-paradigm due to beyond the Standard Model CP-odd phase are likely to be a small perturbation. Therefore, large data sample of clean B's will be needed. Precise determination of the unitarity triangle, along with time dependent CP in penguin dominated hadronic and radiative modes are discussed. Null tests in B, K and top-physics and separate determination of the K-unitarity triangle are also emphasized.
Date: February 27, 2005
Creator: A., SONI
Partner: UNT Libraries Government Documents Department

RF and structural characterization of new SRF films

Description: In the past years, energetic vacuum deposition methods have been developed in different laboratories to improve Nb/Cu technology for superconducting cavities. Jefferson Lab is pursuing energetic condensation deposition via Electron Cyclotron Resonance. As part of this study, the influence of the deposition energy on the material and RF properties of the Nb thin film is investigated. The film surface and structure analyses are conducted with various techniques like X-ray diffraction, Transmission Electron Microscopy, Auger Electron Spectroscopy and RHEED. The microwave properties of the films are characterized on 50 mm disk samples with a 7.5 GHz surface impedance characterization system. This paper presents surface impedance measurements in correlation with surface and material characterization for Nb films produced on copper substrates with different bias voltages and also highlights emerging opportunities for developing multilayer SRF films with a new deposition system.
Date: September 1, 2009
Creator: A.-M. Valente-Feliciano,H. L. Phillips,C. E. Reece,X. Zhao,D. Gu,R. Lukaszew,B. Xiao,K. Seo
Partner: UNT Libraries Government Documents Department

Diagnostics for the Biased Electrode Experiment on NSTX

Description: A linear array of four small biased electrodes was installed in NSTX in an attempt to control the width of the scrape-off layer (SOL) by creating a strong local poloidal electric field. The set of electrodes were separated poloidally by a 1 cm gap between electrodes and were located slightly below the midplane of NSTX, 1 cm behind the RF antenna and oriented so that each electrode is facing approximately normal to the magnetic field. Each electrode can be independently biased to ±100 volts. Present power supplies limit the current on two electrodes to 30 amps the other two to 10 amps each. The effect of local biasing was measured with a set of Langmuir probes placed between the electrodes and another set extending radially outward from the electrodes, and also by the gas puff imaging diagnostic (GPI) located 1 m away along the magnetic field lines intersecting the electrodes. Two fast cameras were also aimed directly at the electrode array. The hardware and controls of the biasing experiment will be presented and the initial effects on local plasma parameters will be discussed.
Date: March 20, 2009
Creator: A.L. Roquemore, S.J. Zweben, C.E. Bush, R. Kaita, R. J. Marsalsa, and R.J. Maqueda
Partner: UNT Libraries Government Documents Department

F(1) for B (forward) D*ln from lattice QCD

Description: The authors would like to determine |V{sub cb}| from the exclusive semi-leptonic decay B{yields}D*lv. The differential decay rate is d{Lambda}/dw = G{sub F}{sup 2}/4{pi}{sup 3}(w{sup 2}-1){sup 1/2}m{sub D*}{sup 3} (m{sub B}-m{sub D*}){sup 2}G(w)|V{sub cb}|{sup 2}|F{sub B{yields}D*}(w)|{sup 2}, where w = v {center_dot} v{prime} and G(1) = 1. At zero recoil (w = 1) heavy-quark symmetry requires F{sub B{yields}D*}(1) to be close to 1. So, |V{sub cb}| is determined by dividing measurements of d{Lambda}/dw by the phase space and well-known factors, and extrapolating to w {yields} 1. This yields |V{sub cb}|F{sub B{yields}D*}(1), and F{sub B{yields}D*}(1) is taken from ''theory''. To date models [1] or a combination of a rigorous inequality plus judgement [2] have been used to estimate F{sub B{yields}D*}(1) - 1. In this work [3] they calculate F{sub B{yields}D*}(1) with lattice gauge theory, in the so-called quenched approximation, but the uncertainty from quenching is included in the error budget.
Date: July 12, 2002
Creator: A.S. Kronfeld, P.B. Mackenzie and J.N. Simone
Partner: UNT Libraries Government Documents Department

Onset and Saturation of Ion Heating by Odd-parity Rotating-magnetic-fields in a Field-reversed Configuration

Description: Heating of figure-8 ions by odd-parity rotating magnetic fields (RMFο) applied to an elongated field-reversed configuration (FRC) is investigated. The largest energy gain occurs at resonances (s ≡ ω(sub)R⁄ω) of the RMFο frequency, ω(sub)R, with the figure-8 orbital frequency, ω, and is proportional to s^2 for s – even resonances and to s for s – odd resonances. The threshold for the transition from regular to stochastic orbits explains both the onset and saturation of heating. The FRC magnetic geometry lowers the threshold for heating below that in the tokamak by an order of magnitude.
Date: November 1, 2005
Creator: A.S. Landsman, S.A. Cohen, A.H. Glasser
Partner: UNT Libraries Government Documents Department

Using GIS to Identify Remediation Areas in Landfills

Description: This paper reports the use of GIS mapping software—ArcMap and ArcInfo Workstation—by the Idaho National Engineering and Environmental Laboratory (INEEL) as a non-intrusive method of locating and characterizing radioactive waste in a 97-acre landfill to aid in planning cleanup efforts. The fine-scale techniques and methods used offer potential application for other burial sites for which hazards indicate a non-intrusive approach. By converting many boxes of paper shipping records in multiple formats into a relational database linked to spatial data, the INEEL has related the paper history to our current GIS technologies and spatial data layers. The wide breadth of GIS techniques and tools quickly display areas in need of remediation as well as evaluate methods of remediation for specific areas as the site characterization is better understood and early assumptions are refined.
Date: August 1, 2004
Creator: A.Tedrow, Linda
Partner: UNT Libraries Government Documents Department


Description: Various circumstances influence crystallization in glassmaking, for example: (1) crystals nucleate and grow before the glass-forming melt occurs; (2) crystals grow or dissolve in flowing melt and during changing temperature; (3) crystals move under the influence of gravity; (4) crystals agglomerate and interact with gas bubbles; (5) high-level wastes (HLW) are mixtures of a large number of components in unusual proportions; (6) melter processing of HLW and the slow cooling of HLW glass in canisters provides an opportunity for a variety of crystalline forms to precipitate; (7) settling of crystals in a HLW glass melter may produce undesirable sludge at the melter bottom; and (8) crystallization of the glass product may increase, but also ruin chemical durability. The conclusions are: (1) crystal growth and dissolution typically proceed in a convective medium at changing temperature; (2) to represent crystallization or dissolution the kinetics must be expressed in the form of rate equations, such as dC/dt = f(C,T) and the temperature dependence of kinetic coefficients and equilibrium concentrations must be accounted for; and (3) non-equilibrium phenomena commonly occur - metastable crystallization, periodic distribution of crystals; and dendritic crystal growth.
Date: August 19, 2009
Creator: AA, KRUGER & PR, HRMA
Partner: UNT Libraries Government Documents Department


Description: In glass processing situations involving glass crystallization, various crystalline forms nucleate, grow, and dissolve, typically in a nonuniform temperature field of molten glass subjected to convection. Nuclear waste glasses are remarkable examples of multicomponent vitrified mixtures involving partial crystallization. In the glass melter, crystals form and dissolve during batch-to-glass conversion, melter processing, and product cooling. Crystals often agglomerate and sink, and they may settle at the melter bottom. Within the body of cooling glass, multiple phases crystallize in a non-uniform time-dependent temperature field. Self-organizing periodic distribution (the Liesegnang effect) is common. Various crystallization phenomena that occur in glass making are reviewed.
Date: October 8, 2009
Creator: AA, KRUGER & PR, HRMA
Partner: UNT Libraries Government Documents Department


Description: This contribution addresses various aspects of nuclear waste vitrification. Nuclear wastes have a variety of components and composition ranges. For each waste composition, the glass must be formulated to possess acceptable processing and product behavior defined in terms of physical and chemical properties that guarantee the glass can be easily made and resist environmental degradation. Glass formulation is facilitated by developing property-composition models, and the strategy of model development and application is reviewed. However, the large variability of waste compositions presents numerous additional challenges: insoluble solids and molten salts may segregate; foam may hinder heat transfer and slow down the process; molten salts may accumulate in container refractory walls; the glass on cooling may precipitate crystalline phases. These problems need targeted exploratory research. Examples of specific problems and their possible solutions are discussed.
Date: March 24, 2008
Creator: AA, KRUGER & PR, HRMA
Partner: UNT Libraries Government Documents Department


Description: A computational method for formulating Hanford HLW glasses was developed that is based on empirical glass composition-property models, accounts for all associated uncertainties, and can be solved in Excel{sup R} in minutes. Calculations for all waste form processing and compliance requirements included. Limited experimental validation performed.
Date: May 27, 2009
Partner: UNT Libraries Government Documents Department