7,590 Matching Results

Search Results

Unquenched Studies Using the Truncated Determinant Algorithm

Description: A truncated determinant algorithm is used to study the physical effects of the quark eigenmodes associated with eigenvalues below 420 MeV. This initial high statistics study focuses on coarse (6{sup 4}) lattices (with O(a{sup 2}) improved gauge action), light internal quark masses and large physical volumes. Three features of full QCD are examined: topological charge distributions, string breaking as observed in the static energy and the eta prime mass.
Date: November 29, 2001
Creator: A. Duncan, E. Eichten and H. Thacker
Partner: UNT Libraries Government Documents Department

Fabrication of high-density cantilever arrays and through-wafer interconnects

Description: Processes to fabricate dense, dry released microstructures with electrical connections on the opposite side of the wafer are described. A 10 x 10 array of silicon and polysilicon cantilevers with high packing density (5 tips/mm<sup>2</sup>) and high uniformity (<10 µm length variation across the wafer) are demonstrated. The cantilever release process uses a deep SF<sub>6</sub>/C<sub>4</sub>F<sub>8</sub>, plasma etch followed by a HBr plasma etch to accurately release cantilevers. A process for fabricating electrical contacts through the backside of the wafer is also described. Electrodeposited resist, conformal CVD metal deposition and deep SF<sub>6</sub>/C<sub>4</sub>F<sub>8</sub> plasma etching are used to make 30 µm/side square vias each of which has a resistance of 50 m(omega).
Date: November 3, 1998
Creator: A. Harley, J.; Abdollahi-Alibeik, S.; Chow, E. M.; Kenney, T. W.; McCarthy, A. M.; McVittie, J. P. et al.
Partner: UNT Libraries Government Documents Department

Analysis of NSTX Upgrade OH Magnet and Center Stack

Description: The new ohmic heating (OH) coil and center stack for the National Spherical Torus Experiment (NSTX) upgrade are required to meet cooling and structural requirements for operation at the enhanced 1 Tesla toroidal field and 2 MA plasma current. The OH coil is designed to be cooled in the time between discharges by water flowing in the center of the coil conductor. We performed resistive heating and thermal hydraulic analyses to optimize coolant channel size to keep the coil temperature below 100 C and meet the required 20 minute cooling time. Coupled electromagnetic, thermal and structural FEA analyses were performed to determine if the OH coil meets the requirements of the structural design criteria. Structural response of the OH coil to its self-field and the field from other coils was analyzed. A model was developed to analyze the thermal and electromagnetic interaction of centerstack components such as the OH coil, TF inner legs and the Bellville washer preload mechanism. Torsional loads from the TF interaction with the OH and poloidal fields are transferred through the TF flag extensions via a torque transfer coupling to the rest of the tokamak structure. A 3D FEA analysis was performed to qualify this design. The results of these analyses, which will be presented in this paper, have led to the design of OH coil and centerstack components that meet the requirements of the NSTX-upgrade structural design criteria.
Date: November 30, 2010
Creator: A. Zolfaghari, P. Titus, J. Chrzanowski, A. Salehzadeh, F. Dahlgren
Partner: UNT Libraries Government Documents Department


Description: We summarize the technical progress and accomplishments on the evaluation methodology for proliferation resistance and physical protection (PR and PP) of Generation IV nuclear energy systems. We intend the results of the evaluations performed with the methodology for three types of users: system designers, program policy makers, and external stakeholders. The PR and PP Working Group developed the methodology through a series of demonstration and case studies. Over the past few years various national and international groups have applied the methodology to nuclear energy system designs as well as to developing approaches to advanced safeguards.
Date: November 14, 2012
Creator: A., Bari R.; Whitlock, J.; Therios, I.U. & Peterson, P.F.
Partner: UNT Libraries Government Documents Department

TRACE/PARCS Core Modeling of a BWR/5 for Accident Analysis of ATWS Events

Description: The TRACE/PARCS computational package [1, 2] isdesigned to be applicable to the analysis of light water reactor operational transients and accidents where the coupling between the neutron kinetics (PARCS) and the thermal-hydraulics and thermal-mechanics (TRACE) is important. TRACE/PARCS has been assessed for itsapplicability to anticipated transients without scram(ATWS) [3]. The challenge, addressed in this study, is to develop a sufficiently rigorous input model that would be acceptable for use in ATWS analysis. Two types of ATWS events were of interest, a turbine trip and a closure of main steam isolation valves (MSIVs). In the first type, initiated by turbine trip, the concern is that the core will become unstable and large power oscillations will occur. In the second type,initiated by MSIV closure,, the concern is the amount of energy being placed into containment and the resulting emergency depressurization. Two separate TRACE/PARCS models of a BWR/5 were developed to analyze these ATWS events at MELLLA+ (maximum extended load line limit plus)operating conditions. One model [4] was used for analysis of ATWS events leading to instability (ATWS-I);the other [5] for ATWS events leading to emergency depressurization (ATWS-ED). Both models included a large portion of the nuclear steam supply system and controls, and a detailed core model, presented henceforth.
Date: November 10, 2013
Creator: A., Cuadra; J., Baek; Cheng, L.; Aronson, A.; Diamond, D. & Yarsky, P.
Partner: UNT Libraries Government Documents Department

Markov Model of Accident Progression at Fukushima Daiichi

Description: On March 11, 2011, a magnitude 9.0 earthquake followed by a tsunami caused loss of offsite power and disabled the emergency diesel generators, leading to a prolonged station blackout at the Fukushima Daiichi site. After successful reactor trip for all operating reactors, the inability to remove decay heat over an extended period led to boil-off of the water inventory and fuel uncovery in Units 1-3. A significant amount of metal-water reaction occurred, as evidenced by the quantities of hydrogen generated that led to hydrogen explosions in the auxiliary buildings of the Units 1 & 3, and in the de-fuelled Unit 4. Although it was assumed that extensive fuel damage, including fuel melting, slumping, and relocation was likely to have occurred in the core of the affected reactors, the status of the fuel, vessel, and drywell was uncertain. To understand the possible evolution of the accident conditions at Fukushima Daiichi, a Markov model of the likely state of one of the reactors was constructed and executed under different assumptions regarding system performance and reliability. The Markov approach was selected for several reasons: It is a probabilistic model that provides flexibility in scenario construction and incorporates time dependence of different model states. It also readily allows for sensitivity and uncertainty analyses of different failure and repair rates of cooling systems. While the analysis was motivated by a need to gain insight on the course of events for the damaged units at Fukushima Daiichi, the work reported here provides a more general analytical basis for studying and evaluating severe accident evolution over extended periods of time. This work was performed at the request of the U.S. Department of Energy to explore 'what-if' scenarios in the immediate aftermath of the accidents.
Date: November 11, 2012
Creator: A., Cuadra; R., Bari; Cheng, L-Y; Ginsberg, T.; Lehner, J.; Martinez-Guridi, G. et al.
Partner: UNT Libraries Government Documents Department

Onset and Saturation of Ion Heating by Odd-parity Rotating-magnetic-fields in a Field-reversed Configuration

Description: Heating of figure-8 ions by odd-parity rotating magnetic fields (RMFο) applied to an elongated field-reversed configuration (FRC) is investigated. The largest energy gain occurs at resonances (s ≡ ω(sub)R⁄ω) of the RMFο frequency, ω(sub)R, with the figure-8 orbital frequency, ω, and is proportional to s^2 for s – even resonances and to s for s – odd resonances. The threshold for the transition from regular to stochastic orbits explains both the onset and saturation of heating. The FRC magnetic geometry lowers the threshold for heating below that in the tokamak by an order of magnitude.
Date: November 1, 2005
Creator: A.S. Landsman, S.A. Cohen, A.H. Glasser
Partner: UNT Libraries Government Documents Department

QCD sum rule calculation of {gamma}{gamma}{sup *} {r_arrow} {pi}{sup 0} transition form factor

Description: The authors develop a QCD sum rule analysis of the form factor F{sub {gamma}{sup *}{gamma}{sup *}{pi}{sup 0}}(q{sup 2},Q{sup 2}) in the region where virtuality of one of the spacelike photons is small q{sup 2} {much_lt} 1 GeV{sup 2} while another is large: Q{sup 2} {approx_gt} 1 GeV{sup 2}. They construct the operator product expansion suitable for this kinematic situation and obtain a QCD sum rule for F{sub {gamma}{sup *}{gamma}{sup *}{pi}{sup 0}}(0, Q{sup 2}). Their results confirm expectation that the momentum transfer dependence of F{sub {gamma}{sup *}{gamma}{sup *}{pi}{sup 0}}(0,Q{sup 2}) is close to interpolation between its Q{sup 2}=0 value fixed by the axial anomaly and Q{sup {minus}2} pQCD behavior for large Q{sup 2}. Their approach, in contrast to pQCD, does not require additional assumptions about the shape of the pion distribution amplitude {var_phi}{sub {pi}}(x). The absolute value of the 1/Q{sup 2} term obtained in this paper favors {var_phi}{sub {pi}}(x) close to the asymptotic form {var_phi}{sub {pi}}{sup as}(x) = 6f{sub {pi}}x(1{minus}x).
Date: November 1, 1995
Creator: A.V.Radyushkin & R.T.Ruskov
Partner: UNT Libraries Government Documents Department


Description: Technetium-99 (Tc-99) has posed serious environmental threats as US Department of Energy's high-level waste. This work reports the vitrification of Re, as surrogate for Tc-99, by iron-borosilicate and iron-phosphate glasses, respectively. Iron-phosphate glasses can dissolve Re as high as {approx} 1.2 wt. %, which can become candidate waste forms for Tc-99 disposal, while borosilicate glasses can retain less than 0.1 wt. % of Re due to high melting temperature and long melting duration. Vitrification of Re as Tc-99's mimic was investigated using iron-borosilicate and iron-phosphate glasses. The retention of Re in borosilicate glasses was less than 0.1 wt. % and more than 99 wt. % of Re were volatilized due to high melting temperature and long melting duration. Because the retention of Re in iron-phosphate glasses is as high as 1.2 wt. % and the volatilization is reduced down to {approx}50 wt. %, iron-phosphate glasses can be one of the glass waste form candidates for Tc (or Re) disposal. The investigations of chemical durability and leaching test of iron-phosphate glasses containing Re are now underway to test the performance of the waste form.
Date: November 7, 2011
Creator: AA, KRUGER; J, HEO; K, XU; JK, CHOI; PR, HRMA & W, UM
Partner: UNT Libraries Government Documents Department

Using Cytochrome c{sub 3} to Make Selenium Nanowires

Description: We report on a new method to make nanostructures, in this case selenium nanowires, in aqueous solution at room temperature. We used the protein cytochrome c{sub 3} to reduce selenate (SeO{sub 4}{sup 2{minus}}) to selenium (Se{sup 0}). Cytochrome c{sub 3} is known for its ability to catalyze reduction of metals including U{sup VI} {yields} U{sup IV}, Cr{sup VI} {yields} Cr{sup III}, Mo{sup VI} {yields} Mo{sup IV}, Cu{sup II} {yields} Cu{sup 0}, Pb{sup II} {yields} Pb{sup 0}, Hg{sup II} {yields} Hg{sup 0}. Nanoparticles of Se{sup 0} precipitated from an aqueous solution at room temperature, followed by spontaneous self-assembling into nanowires. Cytochrome c{sub 3} was extracted from the sulfate-reducing bacteria Desulfovibrio vulgaris (strain Holdenborough) and isolated by the procedure of DerVartanian and Legall.
Date: November 24, 1999
Partner: UNT Libraries Government Documents Department


Description: A mobile melt-dilute (MMD) module for the treatment of aluminum research reactor spent fuel is being developed jointly by the Savannah River National Laboratory and Argonne National Laboratory. The process uses a closed system approach to retain fission products/gases inside a sealed canister after treatment. The MMD process melts and dilutes spent fuel with depleted uranium to obtain an isotopic content of less than 20 percent. The final ingot is solidified inside the sealed canister and can be stored safely either wet or dry until final disposition or reprocessing. The MMD module can be staged at or near the research reactor fuel storage sites to facilitate the melt-dilute treatment of the spent fuel into a stable non-proliferable form.
Date: November 3, 2004
Creator: ADAMS, THAD
Partner: UNT Libraries Government Documents Department

Ion Beam Sputter Fabrication of Micro-Grooving and Micro-Threading Tools

Description: This paper presents techniques for fabricating microscopic, nonplanar features in a variety of materials. Micro-grooving and micro-threading tools having cutting dimensions of 10-30{micro}m are made by focused ion beam sputtering and used in ultra-precision machining. Tool fabrication involves directing a 20 keV gallium beam at polished cylindrical punches made of cobalt M42 high-speed steel or C2 tungsten carbide. This creates cutting edges having radii of curvature less than 0.4 {micro}m, and rake features similar to conventional lathe tools. Clearance for minimizing frictional drag of a tool results from the sputter yield dependence on ion herd target incidence angle. Numerically controlled, ultra-precision machining with micro-grooving tools results in a close matching between tool width and feature size. Microtools controllably machine 13 {micro}m wide, 4 {micro}m deep, helical grooves in polymethyl methacrylate and 6061-T6 Al cylindrical substrates. Micro-grooving tools also fabricate sinusoidal waveform features in polished metal substrates.
Date: November 5, 1999
Partner: UNT Libraries Government Documents Department

Micromilling of Metal Alloys with Focused Ion Beam-Fabricated Tools

Description: This work combines focused ion beam sputtering and ultra-precision machining as a first step in fabricating microstructure in metals and alloys. Specifically, {approx}25{micro}m diameter micro-end mills are made from cobalt M42 high-speed steel and C2 micrograin tungsten carbide tool blanks by ion beam sputtering. A 20 keV focused gallium beam defines tool cutting edges having radii of curvature &lt; 0.1{micro}m. Micro-end mills having 2, 4 and 5 cutting edges successfully machine small trenches in 6061-T4 aluminum, brass, 4340 steel and polymethyl methacrylate. Machined trench widths are approximately equal to the tool diameters and surface roughnesses (rms) are {approx}150 nm or less. Microtools are robust and operate for more than 6 hours without fracture. Results from ultra-precision machining aluminum at feed rates as high as 50 mm/minute are included.
Date: November 5, 1999
Partner: UNT Libraries Government Documents Department


Description: This workshop's focus is on considering ways for improving the proton beam polarization that the AGS delivers to the RHIC. This talk attempts to review the first decade of AGS polarization--the 1980's; to briefly describe some aspects of the machine situation, the depolarization avoidance strategies employed and the success achieved in AGS from the perspective of one of those involved.
Date: November 6, 2002
Creator: AHRENS,L.
Partner: UNT Libraries Government Documents Department

Antireflection Coating Design for Series Interconnected Multi-Junction Solar Cells

Description: AR coating design for multi-junction solar cells can be more challenging than in the single junction case. Reasons for this are discussed. Analytical expressions used to optimize AR coatings for single junction solar cells are extended for use in monolithic, series interconnected multi-junction solar cell AR coating design. The result is an analytical expression which relates the solar cell performance (through J{sub SC}) directly to the AR coating design through the device reflectance. It is also illustrated how AR coating design can be used to provide an additional degree of freedom for current matching multi-junction devices.
Date: November 29, 1999
Partner: UNT Libraries Government Documents Department


Description: The Hanford Site requested, and the U.S. Environmental Protection Agency (EPA) Region 10 approved, a Toxic Substances Control Act of 1976 (TSCA) risk-based disposal approval (RBDA) for solidifying approximately four cubic meters of waste from a specific area of one of the K East Basin: the North Loadout Pit (NLOP). The NLOP waste is a highly radioactive sludge that contained polychlorinated biphenyls (PCBs) regulated under TSCA. The prescribed disposal method for liquid PCB waste under TSCA regulations is either thermal treatment or decontamination. Due to the radioactive nature of the waste, however, neither thermal treatment nor decontamination was a viable option. As a result, the proposed treatment consisted of solidifying the material to comply with waste acceptance criteria at the Waste Isolation Pilot Plant (WPP) in Carlsbad, New Mexico, or possibly the Environmental Restoration Disposal Facility at the Hanford Site, depending on the resulting transuranic (TRU) content of the stabilized waste. The RBDA evaluated environmental risks associated with potential airborne PCBs. In addition, the RBDA made use of waste management controls already in place at the treatment unit. The treatment unit, the T Plant Complex, is a Resource Conservation and Recovery Act of 1976 (RCRA)-permitted facility used for storing and treating radioactive waste. The EPA found that the proposed activities did not pose an unreasonable risk to human health or the environment. Treatment took place from October 26,2005 to June 9,2006, and 332 208-liter (55-gallon) containers of solidified waste were produced. All treated drums assayed to date are TRU and will be disposed at WIPP.
Date: November 14, 2007
Partner: UNT Libraries Government Documents Department


Description: No abstract prepared.
Date: November 1, 2001
Partner: UNT Libraries Government Documents Department


Description: A proposed new heavy ion preinjector for RHIC is described. The progress made at BNL on the development of an Electron Beam Ion Source (EBIS) has increased our confidence that one can build a preinjector meeting RHIC requirements using an EBIS producing intermediate charge state heavy ions. A new RFQ and Linac will be required to accelerate beams from this source to an energy sufficient for injection into the AGS Booster. These are both straightforward devices, very similar to ones already in operation at other laboratories. Injection into the Booster will occur at the same location as the existing heavy ion injection from the Tandem Van de Graaff.
Date: November 6, 2000
Partner: UNT Libraries Government Documents Department

Deep Levels in p- and n-type InGaAsN for High Efficiency Multi-Junction III-V Solar Cells

Description: Red Teaming is an advanced form of assessment that can be used to identify weaknesses in a variety of cyber systems. it is especially beneficial when the target system is still in development when designers can readily affect improvements. This paper discusses the red team analysis process and the author's experiences applying this process to five selected Information Technology Office (ITO) projects. Some detail of the overall methodology, summary results from the five projects, and lessons learned are contained within this paper.
Date: November 11, 1999
Partner: UNT Libraries Government Documents Department