Search Results

open access

Rohm and Haas: Company Uses Knoxville Plant Assessment Results to Develop Best Practices Guidelines and Benchmark for Its Other Sites (Revised)

Description: Rohm and Haas conducted a plant-wide energy assessment at its Knoxville, Tennessee, chemicals manufacturing facility. The assessment identified potential annual energy savings of nearly 47,000 MMBtu in steam and fuel and 11,000 MWh in electricity. Annual cost savings were estimated at almost$1.5 million. After the assessment was replicated in California and Kentucky plants, the companys additional estimated cost savings were$500,000 annually. Additional annual energy savings were about 23,000 M… more
Date: July 1, 2003
Partner: UNT Libraries Government Documents Department
open access

W. R. Grace: Plant Uses Six Sigma Methodology and Traditional Heat Balance Analysis to Identify Energy Conservation Opportunities at Curtis Bay Works (Revised)

Description: The plant-wide energy assessment at W. R. Grace's Curtis Bay Works helped identify four projects with combined potential savings of $840,000 per year. A separate, unique project that would partner W. R. Grace with the City of Baltimore to recover and use landfill gas (methane) to cogenerate steam and electricity was also identified during the assessment. If implemented, the project would recover gas from the landfill to replace 40% of the electricity and 65% of the fuel currently required to pr… more
Date: December 1, 2003
Creator: United States. Department of Energy. Office of Energy Efficiency and Renewable Energy. Office of Industrial Technologies.
Partner: UNT Libraries Government Documents Department
open access

Georgia-Pacific: Crossett Mill Identifies Heat Recovery Projects and Operational Improvements that May Save $9.6 Million Annually

Description: An assessment team conducted a mill-wide energy survey at Georgia-Pacific's Crossett, Arkansas mill to update a previous pinch analysis. Three heat recovery projects were identified that could reduce annual costs by $4.8 million and reduce natural gas use by 1,845,000 x 106 Btu. The overall payback period for the heat recovery projects would be less than 1 year. Furthermore, by implementing operational improvements, the mill could save $4.8 million more annually and 1,500,000 x 106 Btu in natur… more
Date: November 1, 2003
Partner: UNT Libraries Government Documents Department
open access

Citation Corporation: Compressed Air System Optimization Project Saves Energy and Improves Production at Forging Plant

Description: In the 1990s, a subsidiary of the Citation Corporation, Interstate Forging, implemented a compressed air system improvement project at its Milwaukee, Wisconsin, forging plant. This improvement enabled the plant to maintain an adequate and stable pressure level using fewer compressors, which led to improved product quality and lower production downtime. The project also yielded annual energy savings of 820,000 kWh and$45,000. With a total project cost of$67,000, the plant achieved a simple payba… more
Date: May 1, 2003
Partner: UNT Libraries Government Documents Department
open access

Ohio Aluminum Industries: Compressed Air System Improvement Project Saves Energy and Improves Product Quality

Description: In 2001, Ohio Aluminum Industries implemented the first phase of a compressed air system improvement project at its Cleveland, Ohio, plant. By completing this phase, the plant stabilized the system's pressure and improved its performance. Furthermore, it yielded annual energy savings of 716,000 kilowatt-hours and $73,200. The total cost for the project's first phase was $83,500, making the simple payback slightly more than 1 year.
Date: November 1, 2003
Creator: United States. Department of Energy. Office of Energy Efficiency and Renewable Energy. Office of Industrial Technologies.
Partner: UNT Libraries Government Documents Department
open access

Paramount Petroleum: Plant-Wide Energy-Efficiency Assessment Identifies Three Projects

Description: The Paramount Petroleum plant-wide energy assessment identified a cost-effective electrical power and heat energy production facility and systems that could benefit from either fuel-burn adjustments or a new drive/control system. This could lead to independence from a local electric utility with much improved reliability, estimated annual energy savings of 1,200,000 kWh of electricity, and estimated annual savings of$4.1 million for energy reduction and other improvements.
Date: July 1, 2003
Partner: UNT Libraries Government Documents Department
open access

Weirton Steel: Mill Identifies $1.4 Million in Annual Savings Following Plant-Wide Energy-Efficiency Assessment

Description: The Weirton Steel Corporation performed a plant-wide energy assessment of its steel mill plant in Weirton, West Virginia. Based on the assessment results, the company found strong economic justification for six projects that would reduce the use of fossil fuel, electrical energy, and water. All of the projects would save fossil fuel either for heating steam or firing the furnace. This savings totals 108,300 million British thermal units (MMBtu) annually or $1.27 million. Other yearly savings in… more
Date: January 1, 2004
Creator: United States. Department of Energy. Office of Energy Efficiency and Renewable Energy. Office of Industrial Technologies.
Partner: UNT Libraries Government Documents Department
open access

Corning Inc.: Proposed Changes at Glass Plant Indicate $26 Million in Potential Savings

Description: In 2000, the Corning glass plant in Greenville, Ohio, consumed almost 114 million kWh of electricity and nearly 308,000 MMBtu of natural gas in its glassmaking processes for a total cost of approximately $6.4 million. A plant-wide assessment indicated that improvement projects could save nearly $26 million and reduce natural gas use by 122,900 MMBtu per year, reduce electrical use by 72,300,000 kWh per year, and reduce CO2 emissions by 180 million pounds per year.
Date: January 1, 2004
Partner: UNT Libraries Government Documents Department
open access

Progressive Powder Coating: New Infrared Curing Oven at Metal Finishing Plant Increases Production by 50%

Description: Progressive Powder Coating in Mentor, Ohio, is a metal finishing plant that uses a convection oven in its manufacturing process. In an effort to save energy and improve production, the company installed an infrared oven in between the powder coating booth and the convection oven on its production line. This installation allowed the plant to increase its conveyor line speed and increase production by 50 percent. In addition, the plant reduced its natural gas consumption, yielding annual energy s… more
Date: May 1, 2003
Partner: UNT Libraries Government Documents Department
open access

American Water Heater Company: Compressed Air System Optimization Project Saves Energy and Improves Production at Water Heater Plant

Description: In 2001, American Water Heater Company implemented a system-level improvement project on the compressed air system that serves its manufacturing plant in Johnson City, Tennessee. The plant now operates with less compressor capacity, which has reduced its energy consumption and maintenance needs. The project's total cost was $228,000. The annual compressed air energy savings (2,345,000 kWh) and maintenance savings total $160,000, yielding a simple payback of 17 months. Furthermore, the system no… more
Date: November 1, 2003
Creator: United States. Department of Energy. Office of Energy Efficiency and Renewable Energy. Office of Industrial Technologies.
Partner: UNT Libraries Government Documents Department
open access

Lehigh Southwest Cement Company: Compressed Air System Improvement Saves Energy at a Lehigh Southwest Cement Plant

Description: In 2001, Lehigh Southwest Cement Company improved the compressed air system at its cement plant in Tehachapi, California. Consequently, the system was able to operate more efficiently with less compressor capacity and at a lower system pressure. The project yielded total annual savings of 895,000 kWh and $199,000. The initial project cost was $417,000, but Southern California Edison provided a $90,000 incentive payment to reduce the cost to $327,000. Simple payback was about 20 months.
Date: October 1, 2003
Partner: UNT Libraries Government Documents Department
open access

Bayer Polymers: Plant Identifies Numerous Projects Following Plant-Wide Energy-Efficiency Assessment

Description: The Bayer Corporation undertook a plant-wide energy efficiency assessment of its New Martinsville, West Virginia, plant in 2001. The objectives were to identify energy saving projects in the utilities area. The projects, when complete, will save the company the loss of an estimated 236,000 MMBtu ($1.16 million) annually in energy from burning and leaking fossil fuels. Certain other projects will save the company 6,300,000 kWh ($219,000) of electrical energy each year. All of the projects could … more
Date: August 1, 2003
Partner: UNT Libraries Government Documents Department
open access

Neville Chemical Company: Management Pursues Five Projects Following Plant-Wide Energy-Efficiency Assessment

Description: Neville Chemical conducted a plant-wide energy efficiency assessment of its Anaheim, California, plant in the spring of 2002. The assessment justified five projects that would significantly reduce electricity and fuel costs. Four of the five projects, when complete will save 436,200 kilowatt-hours, or$31,840 of electrical energy each year. The remaining project will save 7,473 million British thermal units or$43,600 in fossil fuel each year. One year later, the same assessment team applied its … more
Date: July 1, 2003
Partner: UNT Libraries Government Documents Department
open access

Ford Cleveland: Inside-Out Analysis Identifies Energy and Cost Savings Opportunities at Metal Casting Plant; Industrial Technologies Program Metal Casting BestPractices Plant-Wide Assessment Case Study

Description: The Ford Cleveland Casting Plant used results from its plant-wide energy efficiency assessment to identify 16 energy- and cost-saving projects. These projects addressed combustion, compressed air, water, steam, motor drive, and lighting systems. When implemented, the projects should save a total of$3.28 million per year. In addition, two long-term projects were identified that together would represent another$9.5 million in cost savings.
Date: September 1, 2003
Partner: UNT Libraries Government Documents Department
open access

Compressed Air System Improvement Project Saves Foundry Energy and Increases Production

Description: This case study highlights International Truck and Engine Corporation's optimization project on the compressed air system that serves its foundry, Indianapolis Casting Corporation. Due to the project's implementation, the system's efficiency was greatly improved, allowing the foundry to operate with less compressor capacity, which resulted in reduced energy consumption, significant maintenance savings, and more reliable production.
Date: May 1, 2002
Creator: United States. Department of Energy. Office of Energy Efficiency and Renewable Energy. Office of Industrial Technologies.
Partner: UNT Libraries Government Documents Department
open access

Additional Steam Traps Increase Production of a Drum Oven at a Petroleum Jelly Plant

Description: Additional steam traps were installed on the drum oven at a petroleum jelly production facility at an ExxonMobil plant in Nigeria. The installation improved heat transfer and saved energy.
Date: March 1, 2002
Creator: United States. Department of Energy. Office of Energy Efficiency and Renewable Energy. Office of Industrial Technologies.
Partner: UNT Libraries Government Documents Department
open access

Control Scheme Modifications Increase Efficiency of Steam Generation System at ExxonMobil Gas Plant.

Description: This case study highlights control scheme modifications made to the steam system at ExxonMobil's Mary Ann Gas Plant in Mobile, Alabama, which improved steam flow efficiency and reduced energy costs.
Date: January 1, 2002
Creator: United States. Department of Energy. Office of Energy Efficiency and Renewable Energy. Office of Industrial Technologies.
Partner: UNT Libraries Government Documents Department
open access

Boiler Blowdown Heat Recovery Project Reduces Steam System Energy Losses at Augusta Newsprint

Description: The boiler blowdown process involves the periodic or continuous removal of water from a boiler to remove accumulated dissolved solids and/or sludges. During the process, water is discharged from the boiler to avoid the negative impacts of dissolved solids or impurities on boiler efficiency and maintenance. However, boiler blowdown wastes energy because the blown down liquid is at about the same temperature as the steam produced. Much of this heat can be recovered by routing the blown down liqui… more
Date: February 1, 2002
Creator: United States. Department of Energy. Office of Energy Efficiency and Renewable Energy. Office of Industrial Technologies.
Partner: UNT Libraries Government Documents Department
open access

Achieve Steam System Excellence

Description: This fact sheet describes OIT BestPractices Steam program's systems approach to help companies operate and maintain their industrial steam plants and thermal manufacturing processes more efficiently.
Date: December 1, 2002
Creator: United States. Department of Energy. Office of Energy Efficiency and Renewable Energy. Office of Industrial Technologies.
Partner: UNT Libraries Government Documents Department
open access

Anchor Glass Container Corporation Plant-Wide Energy Assessment Saves Electricity and Expenditures:Office of Industrial Technologies (OIT) BestPractices Glass Assessment Case Study

Description: Plant-wide energy assessments at the Anchor Glass Warner Robins and Jacksonville plants revealed opportunities that could result in significant annual energy savings.
Date: March 1, 2002
Creator: United States. Department of Energy. Office of Energy Efficiency and Renewable Energy. Office of Industrial Technologies.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen