485 Matching Results

Search Results

Waste characterization for radioactive liquid waste evaporators at Argonne National Laboratory - West.

Description: Several facilities at Argonne National Laboratory - West (ANL-W) generate many thousand gallons of radioactive liquid waste per year. These waste streams are sent to the AFL-W Radioactive Liquid Waste Treatment Facility (RLWTF) where they are processed through hot air evaporators. These evaporators remove the liquid portion of the waste and leave a relatively small volume of solids in a shielded container. The ANL-W sampling, characterization and tracking programs ensure that these solids ultimately meet the disposal requirements of a low-level radioactive waste landfill. One set of evaporators will process an average 25,000 gallons of radioactive liquid waste, provide shielding, and reduce it to a volume of six cubic meters (container volume) for disposal. Waste characterization of the shielded evaporators poses some challenges. The process of evaporating the liquid and reducing the volume of waste increases the concentrations of RCIU regulated metals and radionuclides in the final waste form. Also, once the liquid waste has been processed through the evaporators it is not possible to obtain sample material for characterization. The process for tracking and assessing the final radioactive waste concentrations is described in this paper, The structural components of the evaporator are an approved and integral part of the final waste stream and they are included in the final waste characterization.
Date: February 15, 1999
Creator: Christensen, B. D.
Partner: UNT Libraries Government Documents Department

Large eddy simulation and its implementation in the COMMIX code.

Description: Large eddy simulation (LES) is a numerical simulation method for turbulent flows and is derived by spatial averaging of the Navier-Stokes equations. In contrast with the Reynolds-averaged Navier-Stokes equations (RANS) method, LES is capable of calculating transient turbulent flows with greater accuracy. Application of LES to differing flows has given very encouraging results, as reported in the literature. In recent years, a dynamic LES model that presented even better results was proposed and applied to several flows. This report reviews the LES method and its implementation in the COMMIX code, which was developed at Argonne National Laboratory. As an example of the application of LES, the flow around a square prism is simulated, and some numerical results are presented. These results include a three-dimensional simulation that uses a code developed by one of the authors at the University of Notre Dame, and a two-dimensional simulation that uses the COMMIX code. The numerical results are compared with experimental data from the literature and are found to be in very good agreement.
Date: February 15, 1999
Creator: Sun, J. & Yu, D.-H.
Partner: UNT Libraries Government Documents Department

Ball lens reflections by direct solution of Maxwell`s equations

Description: Ball lenses are important for many applications. For example, ball lenses can be used to match the mode of a laser diode (LD) to a single mode fiber (SMF), essential for low-loss, high bit rate communication systems. Modeling the propagation of LD light through a ball lens presents a challenge due to the large angular divergence of the LD field (typically > 20{degrees} HWHM) and the subsequent significant effect of spherical aberration. Accurately calculating the reflected power is also difficult, but essential, since reflections as small as {minus}30 dB can destabilize the LID. A full-wave analysis of this system using, e.g., a finite-difference time-domain method is not practical because of the size of the ball lens, typically hundreds of wavelengths in diameter. Approximate scalar methods can give good results in some cases, but fail to calculate reflected power and miss polarization effects entirely. The authors` approach exploits the fact that the scattering of an arbitrary electromagnetic beam from a sphere is an exactly solvable problem. The scattering of a plane wave from a sphere is a classical problem which was solved by Mie in 1908. More recently, various workers have considered the scattering of a Gaussian beam from a sphere and its numerical implementation for other applications. To the authors knowledge, this is the first time this approach has been applied to a problem in optical design. They are able to calculate reflection and transmission accurately with modest computational effort.
Date: February 15, 1995
Creator: Ratowsky, R.P.; Deri, R.J. & Kallman, J.S.
Partner: UNT Libraries Government Documents Department

Preparation of bismuth powder

Description: The Purpose of this manual is to describe preparation of bismuth powder for use in process operations. Bismuth powder is to be prepared in Room 232 of ``T`` Building where all necessary apparatus is installed.
Date: February 15, 1949
Creator: Cox, G.C.
Partner: UNT Libraries Government Documents Department

Magnetic correlations in doped transition metal oxides

Description: The authors review recent reactor- and spallation-source-based neutron scattering experiments on the magnetic fluctuations and order in a variety of doped transition metal oxides. In particular, data are shown for the NiO chain compound, Y{sub 2{minus}x}Ca{sub x}BaNiO{sub 5}, the two-dimensional cuprate superconductors La{sub 2{minus}x}Sr{sub x}CuO{sub 4} and YBa{sub 2}Cu{sub 3} O{sub 6+x}, and the classical three-dimensional ``Mott-Hubbard`` system V{sub 2{minus}y}O{sub 3}.
Date: February 15, 1995
Creator: Aeppli, G.; Bao, W. & Broholm, C.
Partner: UNT Libraries Government Documents Department

Phonon density of states in Fe/Cr (001) superlattices and Tb-Fe thin-film alloys.

Description: Inelastic nuclear scattering of X-rays from the 14.413 keV nuclear resonance of {sup 57}Fe was employed to measure directly the Fe-projected phonon density of states (DOS) in MBE-grown Fe/Cr(00l) superlattices on MgO(001). The Moessbauer-inactive {sup 56}Fe isotope was used in the Fe layers. A 1{angstrom} thick Moessbauer-active {sup 57}Fe-probe layer (95% enriched) was placed at different locations within the Fe layers. This procedure permits one to distinguish phonon density of states at the Fe-Cr-interface from that at the center of the Fe-film. Distinct differences have been observed in the DOS of our samples. The phonon DOS of an amorphous Tb{sub 33}Fe{sub 67} alloy film was found to be a broad and structureless hump, contrary to that of an epitaxial TbFe{sub 2} film, which exhibits characteristic features.
Date: February 15, 1999
Creator: Alp, E. E.; Keune, W.; Roehlsberger, R.; Ruckert, T.; Schror, H. & Sturhahn, W.
Partner: UNT Libraries Government Documents Department

The underground retrievable storage (URS) high-level waste management concept

Description: This papers presents the concept of long-term underground retrievable storage (URS) of spent reactor fuel in unsaturated rock. Emplacement would be incremental and the system is planned to be experimental and flexible. The rationale for retrievability is examined, and a technical basis for 300-year retrievability is presented. Maximum isolation is the rationale for underground as opposed to surface storage. Although the potential repository site at Yucca Mountain Nevada would be suitable for a URS, alternate sites are discussed. The technical issues involved in licensing a URS for 300 years are simpler than licensing a 10,000 year repository. 16 refs.
Date: February 15, 1991
Creator: Ramspott, L.D.
Partner: UNT Libraries Government Documents Department

Purdue University National Biomedical Tracer Facility: Project definition phase. Final report

Description: The proposed National Biomedical Tracer Facility (NBTF) will house a high-current accelerator dedicated to production of short-lived radionuclides for biomedical and scientific research. The NBTF will play a vital role in repairing and maintaining the United States` research infrastructure for generation of essential accelerator-based radioisotopes. If properly designed and managed, the NBTF should also achieve international recognition as a Center-of-Excellence for research on radioisotope production methods and for associated education and training. The current report documents the results of a DOE-funded NBTF Project Definition Phase study carried out to better define the technical feasibility and projected costs of establishing and operating the NBTF. This report provides an overview of recommended Facility Design and Specifications, including Accelerator Design, Building Design, and the associated Construction Cost Estimates and Schedule. It is recommended that the NBTF be established as an integrated, comprehensive facility for meeting the diverse production, research, and educational missions set forth in previous documents. Based on an analysis of the projected production demands that will be placed on the NBTF, it appears that a 70 MeV, 1 mA, negative ion cyclotron will offer a good balance between production capabilities and the costs of accelerator purchase and operation. A preliminary architectural plan is presented for a facility designed specifically to fulfill the functions of the NBTF in a cost-effective manner. This report also presents a detailed analysis of the Required Federal State, and Local Permits that may be needed to establish the NBTF, along with schedules and cost estimates for obtaining these permits. The Handling, Storage, and Disposal of Radioactive Waste will pose some significant challenges in the operation of the NBTF, but at this stage of planning the associated problems do not appear to be prohibitive.
Date: February 15, 1995
Creator: Green, M.A.
Partner: UNT Libraries Government Documents Department

Sequencing Information Management System (SIMS). Final report

Description: A feasibility study to develop a requirements analysis and functional specification for a data management system for large-scale DNA sequencing laboratories resulted in a functional specification for a Sequencing Information Management System (SIMS). This document reports the results of this feasibility study, and includes a functional specification for a SIMS relational schema. The SIMS is an integrated information management system that supports data acquisition, management, analysis, and distribution for DNA sequencing laboratories. The SIMS provides ad hoc query access to information on the sequencing process and its results, and partially automates the transfer of data between laboratory instruments, analysis programs, technical personnel, and managers. The SIMS user interfaces are designed for use by laboratory technicians, laboratory managers, and scientists. The SIMS is designed to run in a heterogeneous, multiplatform environment in a client/server mode. The SIMS communicates with external computational and data resources via the internet.
Date: February 15, 1996
Creator: Fields, C.
Partner: UNT Libraries Government Documents Department

Tank 241-TY-104 Tank characterization plan

Description: This document is a plan which serves as the contractual agreement between the Characterization Program, Sampling Operations, and WHC 222-C Laboratory. The scope of this plan is to provide guidance for the sampling and analysis of samples for tank 241-TY-104.
Date: February 15, 1995
Creator: Schreiber, R.D.
Partner: UNT Libraries Government Documents Department

A {open_quotes}New{close_quotes} regime for nuclear weapons and materials

Description: In this paper, I discuss the principal ideas that I covered in my presentation on December 8, 1993, at the Future of Foreign Nuclear Materials Symposium held by the Naval Postgraduate School in Monterey, California. I was asked to discuss issues related to military inventories of plutonium, and I took this opportunity to describe a possible declaratory regime that could encompass military as well as civilian inventories of plutonium. The {open_quote}new{close_quotes} in the title does not imply that the regime discussed here is an original idea. Rather, the regime will be {open_quotes}new,{close_quotes} when it is adopted. The regime proposed here and in other works is one in which all stocks of nuclear weapons and materials are declared. Originally, declarations were proposed as a traditional arms control measure. Here, declarations are proposed to support the prevention of misuse of nuclear weapons and materials, including support for the nonproliferation regime. In the following, I discuss: (1) Worldwide inventories of nuclear weapons and materials, including the fact that military plutonium must be viewed as part of that worldwide inventory. (2) Life cycles of nuclear weapons and materials, including the various stages from the creation of nuclear materials for weapons through deployment and retirement of weapons to the final disposition of the materials. (3) Mechanisms for making declarations. (4) Risks and benefits to be derived from declarations. (5) Possibilities for supporting evidence or verification.
Date: February 15, 1994
Creator: Sutcliffe, W.G.
Partner: UNT Libraries Government Documents Department

Strategic petroleum reserve annual report

Description: Section 165 of the Energy Policy and Conservation Act (Public Law 94- 163), as amended, requires the Secretary of Energy to submit annual reports to the President and the Congress on activities of the Strategic Petroleum Reserve (SPR). This report describes activities for the year ending December 31, 1995.
Date: February 15, 1996
Partner: UNT Libraries Government Documents Department

Void fraction system computer software design description

Description: This document describes the software that controls the void fraction instrument. The format of the document may differ from typical Software Design Reports because it was created with a graphical programming language. Hardware is described in Section 2. The purpose of this document is describe the software, so the hardware description is brief. Software is described in Section 3. LabVIEW was used to develop the viscometer software, so Section 3 begins with an introduction to LabVIEW. This is followed by a description of the main program. Finally each Westinghouse developed subVI (sub program) is discussed.
Date: February 15, 1995
Creator: Gimera, M.
Partner: UNT Libraries Government Documents Department

Audit of management of the site characterization program at Yucca Mountain

Description: The Department of Energy (Department) is responsible for establishing an underground repository to store high-level nuclear waste. In accordance with the amended Nuclear Waste Policy Act of 1982, the Department began characterization of the Yucca Mountain site to assess the feasibility of safely storing spent fuel and high-level waste for 10,000 years. Site characterization was originally scheduled to be completed in 1995. Subsequently, your predecessor, Admiral Watkins, changed the plan completion date to 2001. The purpose of our audit was to determine if the Department is making adequate progress in characterizing the Yucca Mountain project.
Date: February 15, 1995
Creator: Layton, J.C.
Partner: UNT Libraries Government Documents Department

CSER 94-012: Criticality safety evaluation report for 340 Facility

Description: This Criticality Safety Evaluation Report (CSER) covers the 340 Facility which acts as a collecting point for liquid and solid waste from various facilities in the 300 Area. Criticality safety is achieved by controlling the amount and concentration of the fissionable material sent to the 340 Facility from the originating facilities in the 300 Area, a method similar to that used elsewhere at Hanford for the waste tank farms. Unlike those, however, the waste received at the 340 Facility will be far less radioactive. It is concluded that present operations meet the two contingency criterion. The facility will still be safely subcritical even after two independent and concurrent failures (either of equipment or administrative controls). The solid waste storage and liquid waste will be managed separately. The solid waste storage area is classified as exempt because it contains less than 15 grams of fissionable materials. The Radioactive Liquid Waste System is classified as isolated because it contains less than one third of a minimum critical mass. The criticality safety of the 340 Facility devoted to the Radioactive Liquid Waste System (RLWS) is assured by the form and concentration of the fissile material and could also be classified as a limited control facility. However, the 340 Facility has been operated as an isolated facility which results in a more conservative limit.
Date: February 15, 1995
Creator: Altschuler, S.J.
Partner: UNT Libraries Government Documents Department

Preliminary design requirements document (DRD) for Project W-236B, ``Initial Pretreatment Module``

Description: The scope of this Design Requirements Document (DRD) is to identify and define the functions, with associated requirements, which must be performed to separate Hanford Site tank waste supernatants into low-level and high-level fractions. This documents sets forth function requirements, performance requirements, and design constraints necessary to begin conceptual design for the Initial Pretreatment Module (IPM). System and physical interfaces between the IPM project and the Tank Waste Remediation System (TWRS) are identified. The constraints, performance requirements, and transfer of information and data across a technical interface will be documented in an Interface Control Document. Supplemental DRDs will be prepared to provide more detailed requirements specific to systems described in the DRD.
Date: February 15, 1995
Creator: Swanson, L.M.
Partner: UNT Libraries Government Documents Department

Petroleum supply monthly, January 1996

Description: The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.
Date: February 15, 1996
Partner: UNT Libraries Government Documents Department

Operating and assurance plan. Revision 5

Description: This document discusses the organization, process management, and performance assessment and improvement of Lawrence Berkeley Laboratory. Topics discussed include: policy; planning; organizational structure; staff proficiency; communication processes; hazards and risks in the work process; process control; documents and records management; self assessments and corrective actions.
Date: February 15, 1996
Partner: UNT Libraries Government Documents Department

Cooperative research in coal liquefaction. Final report, May 1, 1990-- April 30, 1991

Description: The Consortium for Fossil Fuel Liquefaction Science (CFFLS) is currently engaged in a three year contract with the US Department of Energy investigating a range of research topics dealing with direct coal liquefaction. This report summarizes the results of this program in its second year, from May 1, 1990 to April 30, 1991. Accomplishments for this period are presented for the following tasks: Iron-based catalysts for coal liquefaction, exploratory research on coal conversion, novel coal liquefaction concepts, and novel catalysts for coal liquefaction.
Date: February 15, 1992
Creator: Huffman, G.P.
Partner: UNT Libraries Government Documents Department

Shot loading trainer analysis

Description: This document presents the results from the analysis of the shot loading trainer (SLT). This device will be used to test the procedure for installing shot into the annulus of the Project W-320 shipping container. To ensure that the shot is installed uniformly around the container, vibrators will be used to settle the shot. The SLT was analyzed to ensure that it would not jeopardize worker safety during operation. The results from the static analysis of the SLT under deadweight and vibrator operating loads show that the stresses in the SLT are below code allowables. The results from the modal analysis show that the natural frequencies of the SLT are far below the operating frequencies of the vibrators, provided the SLT is mounted on pneumatic tires. The SLT was also analyzed for wind, seismic, deadweight, and moving/transporting loads. Analysis of the SLT is in accordance with SDC-4.1 for safety class 3 structures (DOE-RL 1993) and the American Institute of Steel Construction (AISC) Manual of Steel Construction (AISC 1989).
Date: February 15, 1995
Creator: Peterson, T.K.
Partner: UNT Libraries Government Documents Department

US Department of Energy Naval Petroleum and Oil Shale Reserves combined financial statements and management overview and supplemental financial and management information, September 30, 1995 and 1994

Description: This report presents the results of the independent certified public accountant`s audit of the Department of Energy`s (Department) Naval Petroleum and Oil Shale Reserves (NPOSR) financial statements as of September 30, 1995. The auditors have expressed an unqualified opinion on the 1995 statements. Their reports on the NPOSR internal control structure and compliance with laws and regulations are also provided.
Date: February 15, 1996
Partner: UNT Libraries Government Documents Department

Radiation Physics for Personnel and Environmental Protection

Description: The Fermi National Accelerator Laboratory FERMILAB- TM- 1834 Fermi National Accelerator Laboratory This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. This manuscript has been authored by Universities Research Association, Inc. under con- tract No. DE- ACO% 76CH03000 with the U. S. Department of Energy. The United States Government and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a nonexclusive, paid- up, irrevocable, worldwide license to publish or reproduce the published form of this manuscript, or allow others to do so, for This text is dedicated to my wife Claudia, and our children, Joe and Sally, who provided me with love, cheerfulness, and their support during the long hours spent in the preparation of various versions of this text. I acknowledge the opportunity provided by the Fermilab Director, John Peoples, Jr., to be a part of the U. S. Particle Accelerator School. Also, the encouragement of Mel Month and A. Lincoln Read to teach in the USPAS has been sincerely appreciated. Several members of the Fermilab Environment, Safety and Health Section ...
Date: February 15, 1999
Creator: Cossairt, J.D.
Partner: UNT Libraries Government Documents Department

GaAs Self-Aligned JFETS with Carbon-Doped P+ Region

Description: Self-aligned JFETs with a carbon-doped p{sup +} region have been reported for the first time. For these JFETs, both the channel and p{sup +} region were grown by metal organic chemical vapor deposition (MOCVD) and are termed epitaxial JFETs in this study. The epitaxial JFETs were compared to ion implanted JFETs of similar channel doping and threshold voltage. Both JFETs were fabricated using the same self-aligned process for doping the source and drain regions of the JFET and for eliminating excess gate capacitance of conventional JFETs. The gate turn-on voltage for the epitaxial JFETs was 1.06 V, about 0.1 V higher than for the implanted JFETs. The reverse breakdown voltage was similar for both JFETs but the reverse gate leakage current of the epitaxial JFETs was 1-3 orders of magnitude less than the implanted JFETs. The epitaxial JFETs also showed higher transconductance and lower knee voltage than the implanted JFETs.
Date: February 15, 1999
Creator: Allerman, A.A.; Baca, A.G.; Chang, P.C. & Drummond, T.J.
Partner: UNT Libraries Government Documents Department