10 Matching Results

Search Results

Cost-Effective Reciprocating Engine Emissions Control and Monitoring for E&P Field and Gathering Engines: Report 4

Description: During the fourth reporting period, the project team investigated the Non-Selective Catalytic Reduction technologies that are in use on rich-burn four-stroke cycle engines. Several engines were instrumented and data collected to obtain a rich set of engine emissions and performance data. During the data collection, the performance of the catalyst under a variety of operating conditions was measured. This information will be necessary to specify a set of sensors that can then be used to reliably implement NSCRs as plausible technologies to reduce NOx emissions for four-stroke cycle engines used in the E&P industry. A complete summary all the technologies investigated to data is included in the report. For each technology, the summary includes a description of the process, the emission reduction that is to be expected, information on the cost of the technology, development status, practical considerations, compatibility with other air pollutant control technologies, and any references used to obtain the information.
Date: January 1, 2004
Creator: Chapman, Kirby S.
Partner: UNT Libraries Government Documents Department

Cost-Effective Reciprocating Engine Emissions Control and Monitoring for E&P Field and Gathering Engines: Report 5

Description: During the fifth reporting period, the main goal for the team was to focus on collecting data to develop Oxygen Sensor Recording System (OSRS) parametric relationships for several rich-burn engines. An air/fuel ratio controller was intergraded with an O{sub 2} sensor. With the use of an Alternative Continuous Emissions Monitoring System (ACEMS) provided by Eastern Municipal Water District (EMWD), the performance will be observed during normal operation.
Date: April 1, 2004
Creator: Chapman, Kirby S. & Adriani, Allen
Partner: UNT Libraries Government Documents Department

Cost-Effective Reciprocating Engine Emissions Control and Monitoring for E&P Field and Gathering Engines: Report 8

Description: For the period of the 8th reporting period high-impact control technologies were identified during the meeting at Cooper in Oklahoma City. The technologies that were identified will be tested on the Ajax DP-115 engine and are capable of being widely utilized by the E&P industry. Two major areas where engine controls and ignition systems, but still included were other alternatives to reduce emissions. The most exhilarating item for this quarter was when Ajax engine was delivered to the test bed at the NGML.
Date: January 1, 2004
Creator: Chapman, Kirby S. & Adriani, Allen J.
Partner: UNT Libraries Government Documents Department

Cost-Effective Reciprocating Engine Emissions Control and Monitoring for E&P Field and Gathering Engines: Report 11

Description: This quarterly report discusses the results from a testing phase of the project that evaluates emission control technologies applied to a two-stroke cycle natural gas-fueled engine. In this phase, a one cylinder Ajax DP-115 (a 13.25 in bore x 16 in stroke, 360 rpm engine) is used to assess a sequential analysis and evaluation of a series of engine upgrades. As with most of the engines used in the natural gas industry, the Ajax engine is a mature engine with widespread usage throughout gas gathering industry. The end point is an assessment of these technologies that assigns a cost per unit reduction in NO{sub x} emissions. This report describes potential emission reduction technologies followed by a battery of tests that demonstrate synergies between some of the more promising technologies. While the end-goal is a closed loop control, low cost NO{sub x} retrofit package, additional work remains. The battery of tests include pre-combustion chambers, in-cylinder sensors, the means to adjust the air-to-fuel ratio, and modification of the air filter housing. During several phases of the tests, the ignition timing also was varied to determine the optimal point for ignition timing. The results from these tests suggest that an optimum exists where fuel consumption is minimized along with NO{sub x} emissions. By using the Ajax DP-115 these tests are completed in a low-cost and efficient manner. The various technologies can be quickly exchanged with different hardware, and the cost to operate the engine is very inexpensive.
Date: October 1, 2005
Creator: Chapman, Kirby S.
Partner: UNT Libraries Government Documents Department

Cost-Effective Reciprocating Engine Emissions Control and Monitoring for E&P Field and Gathering Engines: Report 13

Description: This quarterly report re-evaluates current market objectives in the exploration and production industry, discusses continuing progress in testing that evaluates emission control technologies applied to a two-stroke cycle natural gas-fueled engine, and presents a scheme for enacting remote monitoring and control of engines during upcoming field tests. The examination of current market objectives takes into account technological developments and changing expectations for environmental permitting which may have occurred over the last year. This demonstrates that the continuing work in controlled testing and toward field testing is on track Market pressures currently affecting the gas exploration and production industry are shown to include a push for increased production, as well as an increasing cost for environmental compliance. This cost includes the direct cost of adding control technologies to field engines as well as the indirect cost of difficulty obtaining permits. Environmental regulations continue to require lower emissions targets, and some groups of engines which had not previously been regulated will be required to obtain permits in the future. While the focus remains on NOx and CO, some permits require reporting of additional emissions chemicals. Continuing work in controlled testing uses a one cylinder Ajax DP-115 (a 13.25 in bore x 16 in stroke, 360 rpm engine) to assess a sequential analysis and evaluation of a series of engine upgrades. As with most of the engines used in the natural gas industry, the Ajax engine is a mature engine with widespread usage throughout the gas gathering industry. The end point is an assessment of these technologies that assigns a cost per unit reduction in NOx emissions. Technologies including one pre-combustion chamber, in-cylinder sensors, the means to adjust the air-to-fuel ratio, and modification of the air filter housing have been evaluated in previous reports. Current work focuses on final preparations for testing pre-combustion ...
Date: March 1, 2006
Creator: Beshouri, Greg; Chapman, Kirby S.; McCarthy, Jim; Nuss-Warren, Sarah R. & Whelan, Mike
Partner: UNT Libraries Government Documents Department

Cost-Effective Reciprocating Engine Emissions Control and Monitoring for E&P Field and Gathering Engines: Report 14

Description: Continuing work in controlled testing uses a one cylinder Ajax DP-115 (a 13.25 in bore x 16 in stroke, 360 rpm engine) to assess a sequential analysis and evaluation of a series of engine upgrades. As with most of the engines used in the natural gas industry, the Ajax engine is a mature engine with widespread usage throughout the gas gathering industry. The end point is an assessment of these technologies that assigns a cost per unit reduction in NOX emissions. Technologies including one pre-combustion chamber, in-cylinder sensors, the means to adjust the air-to-fuel ratio, and modification of the air filter housing have been evaluated in previous reports. Current work focuses on final preparations for testing pre-combustion chambers with different characteristics and using mid-to-high-pressure fuel valves and initial runs of these tests. By using the Ajax DP-115 these tests are completed in a low-cost and efficient manner. The various technologies can be quickly exchanged with different hardware, and it is inexpensive to run the engine. Progress in moving toward field testing is discussed, and changes to the first planned field test are presented. Although changes have been made to the previous plan, it is expected that several new sites will be selected soon. Field tests will begin in the next quarter.
Date: July 1, 2006
Creator: Chapman, Kirby S. & Nuss-Warren, Sarah R.
Partner: UNT Libraries Government Documents Department

Cost-Effective Reciprocating Engine Emissions Control and Monitoring for E&P Field and Gathering Engines: Report 2

Description: During the second reporting period, the project team focused on identifying promising technologies that can then be used to monitor and control emissions from E&P engines. These technologies include control and monitoring technologies and in most cases can be used to monitor engine performance as well as control and monitor engine emissions. The project team also identified three potential sources to receive a Cooper Ajax engine that is approximately 100 bhp. The goal is to have this engine delivered to the project team by the end of the calendar year 2003. This will then allow the team to prepare the engine for testing at Ricardo in early 2004.
Date: December 1, 2003
Creator: Chapman, Kirby S.
Partner: UNT Libraries Government Documents Department