5 Matching Results

Search Results

CO2 Capture by Absorption With Potassium Carbonate Quarterly Report

Description: The objective of this work is to improve the process for CO{sub 2} capture by alkanolamine absorption/stripping by developing an alternative solvent, aqueous K{sub 2}CO{sub 3} promoted by piperazine. CO{sub 2} mass transfer rates are second order in piperazine concentration and increase with ionic strength. Modeling of stripper performance suggests that 5 m K{sup +}/2.5 m PZ will require 25 to 46% less heat than 7 m MEA. The first pilot plant campaign was completed on June 24. The CO{sub 2} penetration through the absorber with 20 feet of Flexipac{trademark} 1Y varied from 0.6 to 16% as the inlet CO{sub 2} varied from 3 to 12% CO{sub 2} and the gas rate varied from 0.5 to 3 kg/m{sup 2}-s.
Date: July 29, 2004
Creator: Rochelle, Gary T.; Chen, Eric; Cullinane, J.Tim; Hilliard, Marcus; Lu, Jennifer; Oyenekan, Babatunde et al.
Partner: UNT Libraries Government Documents Department

CO2 Capture by Absorption With Potassium Carbonate Quarterly Report

Description: The objective of this work is to improve the process for CO{sub 2} capture by alkanolamine absorption/stripping by developing an alternative solvent, aqueous K{sub 2}CO{sub 3} promoted by piperazine. The baseline campaign with 30% MEA has given heat duties from 40 to 70 kcal/gmol CO{sub 2} as predicted by the stripper model. The Flexipak 1Y structured packing gives significantly better performance than IMTP 40 duped packing in the absorber, but in the stripper the performance of the two packings is indistinguishable. The FTIR analyzer measured MEA volatility in the absorber represented by an activity coefficient of 0.7. In the MEA campaign the material balance closed with an average error of 3.5% and the energy balance had an average error of 5.9.
Date: July 31, 2005
Creator: Rochelle, Gary T.; Hilliard, Marcus; Chen, Eric; Oyenekan, Babatunde; Dugas, Ross & McLees, John
Partner: UNT Libraries Government Documents Department

CO2 Capture by Absorption With Potassium Carbonate Quarterly Report

Description: The objective of this work is to improve the process for CO{sub 2} capture by alkanolamine absorption/stripping by developing an alternative solvent, aqueous K{sub 2}CO{sub 3} promoted by piperazine. Progress has been made in this reporting period on three subtasks. A simple thermodynamic model has been developed to represent the CO{sub 2} vapor pressure and speciation of the new solvent. A rate model has been formulated to predict the CO{sub 2} flux with these solutions under absorber conditions. A process and instrumentation diagram and process flow diagram have been prepared for modifications of the existing pilot plant system.
Date: October 1, 2002
Creator: Rochelle, Gary T. & Seibert, A. Frank
Partner: UNT Libraries Government Documents Department

CO2 Capture by Absorption With Potassium Carbonate Quarterly Report

Description: The objective of this work is to improve the process for CO{sub 2} capture by alkanolamine absorption/stripping by developing an alternative solvent, aqueous K{sub 2}CO{sub 3} promoted by piperazine. The stripper model with Aspen Custom Modeler and careful optimization of solvent rate suggests that 7 m MEA and 5 m K+/2.5 m PZ will be practically equivalent in energy requirement and optimum solution capacity. The multipressure stripper reduces energy consumption by 15% with a maximum pressure of 5 atm. The use of vanadium as a corrosion inhibitor will carry little risk of long-term environmental or health effects liability, but the disposal of solvent with vanadium will be subject to regulation, probably as a hazardous waste. Analysis of the pilot plant data from Campaign 1 has given values of the mass transfer coefficient consistent with the rate data from the wetted wall column. With a rich end pinch, 30% MEA should provide a capacity of 1.3-1.4 mole CO{sub 2}/kg solvent.
Date: November 8, 2004
Creator: Rochelle, Gary T.; Chen, Eric; Lu, Jennifer; Oyenekan, Babatunde & Dugas, Ross
Partner: UNT Libraries Government Documents Department

CO2 Capture by Absorption With Potassium Carbonate Quarterly Report

Description: The objective of this work is to improve the process for CO{sub 2} capture by alkanolamine absorption/stripping by developing an alternative solvent, aqueous K{sub 2}CO{sub 3} promoted by piperazine. Stripper modeling suggests the energy requirement with a simple stripper will be about the same for 5 m K{sup +}/2.5 m PZ and 7 m MEA. Modeling with a generic solvent shows that the optimum heat of CO{sub 2} desorption to minimize heat duty lies between 15 and 25 kcal/gmol. On-line pH and density measurements are effective indicators of loading and total alkalinity for the K+/PZ solvent. The baseline pilot plant campaign with 30% MEA has been started.
Date: April 29, 2005
Creator: Rochelle, Gary T.; Chen, Eric; Lu, Jennifer; Oyenekan, Babatunde & Dugas, Ross
Partner: UNT Libraries Government Documents Department