21 Matching Results

Search Results

Development of Trivalent Ytterbium Doped Fluorapatites for Diode-Pumped Laser Applications

Description: One of the major motivators of this work is the Mercury Project, which is a 1 kW scalable diode-pumped solid-state laser system under development at Lawrence Livermore National Laboratory (LLNL). Major goals include 100 J pulses, 10% wallplug efficiency, 10 Hz repetition rate, and a 5 times diffraction limited beam. To achieve these goals the Mercury laser incorporates ytterbium doped Sr{sub 5}(PO{sub 4}){sub 3}F (S-FAP) as the amplifier gain medium. The primary focus of this thesis is a full understanding of the properties of this material which are necessary for proper design and modeling of the system. Ytterbium doped fluorapatites, which were previously investigated at LLNL, were found to be ideal candidate materials for a high power amplifier systems providing high absorption and emission cross sections, long radiative lifetimes, and high efficiency. A family of barium substituted S-FAP crystals were grown in an effort to modify the pump and emission bandwidths for application to broadband diode pumping and short pulse generation. Crystals of Yb{sup 3+}:Sr{sub 5-x}Ba{sub x}(PO{sub 4}){sub 3}F where x < 1 showed homogeneous lines offering 8.4 nm (1.8 times enhancement) of absorption bandwidth and 6.9 nm (1.4 times enhancement) of emission bandwidth. The gain saturation fluence of Yb:S-FAP was measured to be 3.2 J/cm{sup 2} using a pump-probe experiment where the probe laser was a high intensity Q-switched master oscillator power amplifier system. The extraction data was successfully fit to a homogeneous extraction model. The crystal quality of Czochralski grown Yb:S-FAP crystals, which have been plagued by many defects such as cracking, cloudiness, bubble core, slip dislocations, and anomalous absorption, was investigated interferometrically and quantified by means of Power Spectral Density (PSD) plots. The very best crystals grown to date were found to have adequate crystal quality for use in the Mercury laser system. In addition to phase ...
Date: June 21, 2000
Creator: Bayramian, A.J.
Partner: UNT Libraries Government Documents Department

GaAs Blocked-Impurity-Band Detectors for Far-Infrared Astronomy

Description: High-purity and doped GaAs films have been grown by Liquid-phase epitaxy (LPE) for development of a blocked impurity band (BIB) detector for far-infrared radiation. The film growth process developed has resulted in the capability to grow GaAs with a net active impurity concentration below 1 x 10{sup 13} cm{sup -3}, ideal for the blocking layer of the BIB detector. The growth of n-type LPE GaAs films with donor concentrations below the metal-insulator transition, as required for the absorbing layer of a BIB detector, has been achieved. The control of the donor concentration, however, was found to be insufficient for detector production. The growth by LPE of a high-purity film onto a commercially grown vapor-phase epitaxial (VPE) n-type GaAs doped absorbing layer resulted in a BIB device that showed a significant reduction in the low-temperature dark current compared to the absorbing layer only. Extended optical response was not detected, most likely due to the high compensation of the commercially grown GaAs absorbing layer, which restricts the depletion width of the device.
Date: December 21, 2004
Creator: Cardozo, Benjamin Lewin
Partner: UNT Libraries Government Documents Department

Sum-frequency spectroscopic studies: I. Surface melting of ice, II. Surface alignment of polymers

Description: Surface vibrational spectroscopy via infrared-visible sum-frequency generation (SFG) has been established as a useful tool to study the structures of different kinds of surfaces and interfaces. This technique was used to study the (0001) face of hexagonal ice (Ih). SFG spectra in the O-H stretch frequency range were obtained at various sample temperatures. For the vapor(air)/ice interface, the degree of orientational order of the dangling OH bonds at the surface was measured as a function of temperature. Disordering sets in around 200 K and increases dramatically with temperature, which is strong evidence of surface melting of ice. For the other ice interfaces (silica/OTS/ice and silica/ice), a similar temperature dependence of the hydrogen bonded OH stretch peak was observed; the free OH stretch mode, however, appears to be different from that of the vapor (air)/ice interface due to interactions at the interfaces. The technique was also used to measure the orientational distributions of the polymer chains on a rubbed polyvinyl alcohol surface. Results show that the polymer chains at the surface appear to be well aligned by rubbing, and the adsorbed liquid crystal molecules are aligned, in turn, by the surface polymer chains. A strong correlation exists between the orientational distributions of the polymer chains and the liquid crystal molecules, indicating that the surface-induced bulk alignment of a liquid crystal film by rubbed polymer surfaces is via an orientational epitaxy-like mechanism. This thesis also contains studies on some related issues that are crucial to the above applications. An experiment was designed to measure SFG spectra in both reflection and transmission. The result confirms that SFG in reflection is generally dominated by the surface contribution. Another issue is the motional effect due to fast orientational motion of molecules at a surface or interface. Calculations show that the effect is significant if the ...
Date: December 21, 2000
Creator: Wei, Xing
Partner: UNT Libraries Government Documents Department

Towards Chip Scale Liquid Chromatography and High Throughput Immunosensing

Description: This work describes several research projects aimed towards developing new instruments and novel methods for high throughput chemical and biological analysis. Approaches are taken in two directions. The first direction takes advantage of well-established semiconductor fabrication techniques and applies them to miniaturize instruments that are workhorses in analytical laboratories. Specifically, the first part of this work focused on the development of micropumps and microvalves for controlled fluid delivery. The mechanism of these micropumps and microvalves relies on the electrochemically-induced surface tension change at a mercury/electrolyte interface. A miniaturized flow injection analysis device was integrated and flow injection analyses were demonstrated. In the second part of this work, microfluidic chips were also designed, fabricated, and tested. Separations of two fluorescent dyes were demonstrated in microfabricated channels, based on an open-tubular liquid chromatography (OT LC) or an electrochemically-modulated liquid chromatography (EMLC) format. A reduction in instrument size can potentially increase analysis speed, and allow exceedingly small amounts of sample to be analyzed under diverse separation conditions. The second direction explores the surface enhanced Raman spectroscopy (SERS) as a signal transduction method for immunoassay analysis. It takes advantage of the improved detection sensitivity as a result of surface enhancement on colloidal gold, the narrow width of Raman band, and the stability of Raman scattering signals to distinguish several different species simultaneously without exploiting spatially-separated addresses on a biochip. By labeling gold nanoparticles with different Raman reporters in conjunction with different detection antibodies, a simultaneous detection of a dual-analyte immunoassay was demonstrated. Using this scheme for quantitative analysis was also studied and preliminary dose-response curves from an immunoassay of a mo del antigen were obtained. Simultaneous detection of several analytes at the same address can potentially increase the analysis speed, and can further expand the analysis capability of a microarray chip.
Date: September 21, 2000
Creator: Ni, J.
Partner: UNT Libraries Government Documents Department

Cellular membrane trafficking of mesoporous silica nanoparticles

Description: This dissertation mainly focuses on the investigation of the cellular membrane trafficking of mesoporous silica nanoparticles. We are interested in the study of endocytosis and exocytosis behaviors of mesoporous silica nanoparticles with desired surface functionality. The relationship between mesoporous silica nanoparticles and membrane trafficking of cells, either cancerous cells or normal cells was examined. Since mesoporous silica nanoparticles were applied in many drug delivery cases, the endocytotic efficiency of mesoporous silica nanoparticles needs to be investigated in more details in order to design the cellular drug delivery system in the controlled way. It is well known that cells can engulf some molecules outside of the cells through a receptor-ligand associated endocytosis. We are interested to determine if those biomolecules binding to cell surface receptors can be utilized on mesoporous silica nanoparticle materials to improve the uptake efficiency or govern the mechanism of endocytosis of mesoporous silica nanoparticles. Arginine-glycine-aspartate (RGD) is a small peptide recognized by cell integrin receptors and it was reported that avidin internalization was highly promoted by tumor lectin. Both RGD and avidin were linked to the surface of mesoporous silica nanoparticle materials to investigate the effect of receptor-associated biomolecule on cellular endocytosis efficiency. The effect of ligand types, ligand conformation and ligand density were discussed in Chapter 2 and 3. Furthermore, the exocytosis of mesoporous silica nanoparticles is very attractive for biological applications. The cellular protein sequestration study of mesoporous silica nanoparticles was examined for further information of the intracellular pathway of endocytosed mesoporous silica nanoparticle materials. The surface functionality of mesoporous silica nanoparticle materials demonstrated selectivity among the materials and cancer and normal cell lines. We aimed to determine the specific organelle that mesoporous silica nanoparticles could approach via the identification of harvested proteins from exocytosis process. Based on the study of endo- and exocytosis behavior ...
Date: June 21, 2012
Creator: Fang, I-Ju
Partner: UNT Libraries Government Documents Department

Charge Transfer and Support Effects in Heterogeneous Catalysis

Description: The kinetic, electronic and spectroscopic properties of two‐dimensional oxide‐supported catalysts were investigated in order to understand the role of charge transfer in catalysis. Pt/TiO{sub 2} nanodiodes were fabricated and used as catalysts for hydrogen oxidation. During the reaction, the current through the diode, as well as its I‐V curve, were monitored, while gas chromatography was used to measure the reaction rate. The current and the turnover rate were found to have the same temperature dependence, indicating that hydrogen oxidation leads to the non‐adiabatic excitation of electrons in Pt. A fraction of these electrons have enough energy to ballistically transport through Pt and overcome the Schottky barrier at the interface with TiO{sub 2}. The yield for this phenomenon is on the order of 10{sup ‐4} electrons per product molecule formed, similar to what has been observed for CO oxidation and for the adsorption of many different molecules. The same Pt/TiO{sub 2} system was used to compare currents in hydrogen oxidation and deuterium oxidation. The current through the diode under deuterium oxidation was found to be greater than under hydrogen oxidation by a factor of three. Weighted by the difference in turnover frequencies for the two isotopes, this would imply a chemicurrent yield 5 times greater for D{sub 2} compared to H{sub 2}, contrary to what is expected given the higher mass of D{sub 2}. Reversible changes in the rectification factor of the diode are observed when switching between D{sub 2} and H{sub 2}. These changes are a likely cause for the differences in current between the two isotopes. In the nanodiode experiments, surface chemistry leads to charge flow, suggesting the possibility of creating charge flow to tune surface chemistry. This was done first by exposing a Pt/Si diode to visible light while using it as a catalyst for H{sub 2} oxidation. ...
Date: December 21, 2011
Creator: Hervier, Antoine
Partner: UNT Libraries Government Documents Department

First observation of the Charmless Decay B to K pi0pi0 and Study of its Dalitz Plot Structure

Description: Results for the first measurement of the inclusive branching and CP asymmetry of the charmless 3-body decay B{sup +} {yields} K{sup +}{pi}{sup 0}{pi}{sup 0} are presented. The analysis uses a data sample with an integrated luminosity of 429.0 fb{sup -1}, recorded by the BABAR detector at the PEP-II asymmetric B Factory. This sample corresponds to 470.9 {+-} 2.8 million B{bar B} pairs. Measurements of the branching fractions (B) and CP asymmetries (A{sub CP}) of some of the intermediate resonances in the K{sup +}{pi}{sup 0}{pi}{sup 0} Dalitz plot are also presented.
Date: March 21, 2012
Creator: Puccio, Eugenia Maria Teresa Irene & /SLAC, /Warwick U.
Partner: UNT Libraries Government Documents Department

Electron Generation and Transport in Intense Relativistic Laser-Plasma Interactions Relevant to Fast Ignition ICF

Description: The reentrant cone approach to Fast Ignition, an advanced Inertial Confinement Fusion scheme, remains one of the most attractive because of the potential to efficiently collect and guide the laser light into the cone tip and direct energetic electrons into the high density core of the fuel. However, in the presence of a preformed plasma, the laser energy is largely absorbed before it can reach the cone tip. Full scale fast ignition laser systems are envisioned to have prepulses ranging between 100 mJ to 1 J. A few of the imperative issues facing fast ignition, then, are the conversion efficiency with which the laser light is converted to hot electrons, the subsequent transport characteristics of those electrons, and requirements for maximum allowable prepulse this may put on the laser system. This dissertation examines the laser-to-fast electron conversion efficiency scaling with prepulse for cone-guided fast ignition. Work in developing an extreme ultraviolet imager diagnostic for the temperature measurements of electron-heated targets, as well as the validation of the use of a thin wire for simultaneous determination of electron number density and electron temperature will be discussed.
Date: April 21, 2010
Creator: Ma, T
Partner: UNT Libraries Government Documents Department

Transition Metal Complexes of Cr, Mo, W and Mn Containing {eta}{sup 1}(S)-2,5-Dimethylthiophene, Benzothiophene and Dibenzothiophene Ligands

Description: The UV photolysis of hexanes solutions containing the complexes M(CO){sub 6} (M=Cr, Mo, W) or CpMn(CO){sub 3} (Cp={eta}{sup 5}-C{sub 5}H{sub 5}) and excess thiophene (T{sup *}) (T{sup *}=2,5-dimethylthiophene (2,5-Me{sub 2}T), benzothiophene (BT), and dibenzothiophene (DBT)) produces the {eta}{sup 1}(S)-T{sup *} complexes (CO){sub 5}M({eta}{sup 1}(S)-T{sup *}) 1-8 or Cp(CO){sub 2}Mn({eta}{sup 1}(S)-T{sup *})9-11, respectively. However, when T{sup *}=DBT, and M=Mo, a mixture of two products result which includes the {eta}{sup 1}(S)-DBT complex (CO){sub 5}Mo({eta}{sup 1}(S)-DBT) 4a and the unexpected {pi}-complex (CO){sub 3}Mo({eta}{sup 6}-DBT) 4b as detected by {sup 1}H NMR. The liability of the {eta}{sup 1}(S)-T{sup *} ligands is illustrated by the rapid displacement of DBT in the complex (CO){sub 5}W({eta}{sup 1}(S)-DBT) (1) by THF, and also in the complexes (CO){sub 5}Cr({eta}{sup 1}(S)-DBT) (5) and CpMn(CO){sub 2}({eta}{sup 1}(S)-DBT) (9) by CO (1 atm) at room temperature. Complexes 1-11 have been characterized spectroscopically ({sup 1}H NMR, IR) and when possible isolated as analytically pure solids (elemental analysis, EIMS). Single crystal, X-ray structural determinations are reported for (CO){sub 5}W({eta}{sup 1}(S)-DBT) and Cp(CO){sub 2}Mn({eta}{sup 1}(S)-DBT).
Date: September 21, 2000
Creator: Reynolds, M.
Partner: UNT Libraries Government Documents Department

Study of Rare B-Meson Decays Related to the CPObservable sin(2beta+gamma) at the BABAR Experiment

Description: This study reports the observation of the decays B{sup 0}{yields}D{sup (*)+}{sub S}{pi}{sup -} and B{sup 0}{yields}D{sup (*)-}K{sup +} in a sample of 230 x 10{sup 6} {Upsilon}(4S) {yields} B{bar B} events collected with the BABAR detector at the PEP-II asymmetric-energy e{sup +}e{sup -} storage ring, located at the Stanford Linear Accelerator Center. The branching fractions {beta}(B{sup 0} {yields} D{sup +}{sub S}{pi}{sup -}) = (1.3 {+-} 0.3 (stat) {+-} 0.2 (syst)) x 10{sup -5}, {beta}(B{sup 0} {yields} D{sup +}{sub S}K{sup +}) = (2.5 {+-} 0.4 (stat) {+-} 0.4 (syst)) x 10{sup -5}, {beta}(B{sup 0}{yields}D{sup (*)+}{sub S}{pi}{sup -}) = (2.8 {+-} 0.6 (stat) {+-} 0.5 (syst)) x 10{sup -5}, and {beta}(B{sup 0}{yields}D{sup (*)-}K{sup +}) = (2.0 {+-} 0.5 (stat) {+-} 0.4 (syst)) x 10{sup -5} are measured. The significance of the measurements to differ from zero are 5, 9, 6, and 5 standard deviations, respectively. This is a first observation of the decaysB{sup 0}{yields}D{sup (*)+}{sub S}{pi}{sup -} and B{sup 0}{yields}D{sup (*)-}K{sup +}. These results may potentially be useful in determining the CP asymmetry parameter sin(2{beta} + {gamma}) in the decays B{sup 0}{yields}D{sup (*)+}{sub S}{pi}{sup -}.
Date: August 21, 2007
Creator: Orimoto, Toyoko Jennifer & /UC, Berkeley
Partner: UNT Libraries Government Documents Department

Target Visualization at the National Ignition Facility

Description: As the National Ignition Facility continues its campaign to achieve ignition, new methods and tools will be required to measure the quality of the targets used to achieve this goal. Techniques have been developed to measure target surface features using a phase-shifting diffraction interferometer and Leica Microsystems confocal microscope. Using these techniques we are able to produce a detailed view of the shell surface, which in turn allows us to refine target manufacturing and cleaning processes. However, the volume of data produced limits the methods by which this data can be effectively viewed by a user. This paper introduces an image-based visualization system for data exploration of target shells at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory. It aims to combine multiple image sets into a single visualization to provide a method of navigating the data in ways that are not possible with existing tools.
Date: November 21, 2011
Creator: Potter, D
Partner: UNT Libraries Government Documents Department

A Voltage Controlled Oscillator for a Phase-Locked Loop Frequency Synthesizer in a Silicon-on-Sapphire Process

Description: Engineers from a government-owned engineering and manufacturing facility were contracted by government-owned research laboratory to design and build an S-band telemetry transmitter using Radio Frequency Integrated Circuit (RFIC) technology packaged in a Low-Temperature Co-fired Ceramic (LTCC) Multi-Chip Module. The integrated circuit technology chosen for the Phase-Locked Loop Frequency Synthesizer portion of the telemetry transmitter was a 0.25 um CMOS process that utilizes a sapphire substrate and is fabricated by Peregrine Semiconductor corporation. This thesis work details the design of the Voltage Controlled Oscillator (VCO) portion of the PLL frequency synthesizer and constitutes an fully integrated VCO core circuit and a high-isolation buffer amplifier. The high-isolation buffer amplifier was designed to provide 16 dB of gain for 2200-3495 MHz as well as 60 dB of isolation for the oscillator core to provide immunity to frequency pulling due to RF load mismatch. Actual measurements of the amplifier gain and isolation showed the gain was approximately 5 dB lower than the simulated gain when all bond-wire and test substrate parasitics were taken into account. The isolation measurements were shown to be 28 dB at the high end of the frequency band but the measurement was more than likely compromised due to the aforementioned bond-wire and test substrate parasitics. The S-band oscillator discussed in this work was designed to operate over a frequency range of 2200 to 2300 MHz with a minimum output power of 0 dBm with a phase-noise of -92 dBc/Hz at a 100 kHz offset from the carrier. The tuning range was measured to be from 2215 MHz to 2330 MHz with a minimum output power of -7 dBm over the measured frequency range. A phase-noise of -90 dBc was measured at a 100 kHz offset from the carrier.
Date: May 21, 2009
Creator: Garrison, Sean
Partner: UNT Libraries Government Documents Department

Reconstruction of B- to D*0 e- anti_nu_e Decays and Determination of |Vcb|

Description: In this analysis the decay B- {yields} D*{sup 0}e{sup -}{bar {nu}}{sub e} is measured. The underlying data sampel consists of about 226 million B{bar B}-pairs accumulated on the {Upsilon}(4S) resonance by the BABAR detector at the asymmetric e{sup +}e{sup -} collider PEP-II. The reconstruction of the decay uses the channels D*{sup 0}{yields}D{sup 0}{pi}{sup 0}, D{sup 0} {yields} K{sup -}{pi}{sup +} and {pi}{sup 0} {yields} {gamma}{gamma}. The neutrino is not reconstructed. Since the rest frame of the B meson is unknown, the boost w of the D*{sup 0} meson in the B meson rest frame is estimated by {bar w}. The {bar w} spectrum of the data is described in terms of the partial decay width d{Gamma}/dw into an expectation of the measured {bar w} spectrum. d{Gamma}/dw depends on a form factor F(w) parameterizing the strong interaction in the decay process. To find the best descriptive d{Gamma}/dw a fit to the data determines the following two parameters of d{Gamma}/dw: (i) F(1)|V{sub cb}|, the product between F at zero D*{sup 0} recoil and the CKM matrix element |V{sub cb}|; (ii) {rho}{sup 2}{sub A1}, a parameter of the form factor F(w). The former parameter scales the height of d{Gamma}/dw and {rho}{sup 2}{sub A1} varies the shape of it.
Date: August 21, 2007
Creator: Schubert, Jens
Partner: UNT Libraries Government Documents Department

THERMOLUMINESCENCE SPECTRA AND ACTIVATION ENERGIES FOR AROMATIC AMINO ACIDS, TRYPSIN, AND SPORES OF BACILLUS MEGATERIUM

Description: The theory of thermoluminescence is reviewed. The spectral distribution of thermoluminescence and the activation energies associated with peaks of the glow curves were determined for samples of aromatic amino acids, trypsin, and spores of Bacillus megaterium irradiated by a Co/sup 60/ gamma source. All of the substances, except phenylalanine, exhibited a readily observable long-lived glow that persisted up to at least 2 hr following irradiation. Possible reaction mechanisms in the production of thermoluminescence in biological materials are discussed. (C.H.)
Date: June 21, 1963
Creator: Weinberg, C.J.; Carter, J.G.; Nelson, D.R. & Birkhoff, R.D.
Partner: UNT Libraries Government Documents Department

Aspherical supernovae

Description: Although we know that many supernovae are aspherical, the exact nature of their geometry is undetermined. Because all the supernovae we observe are too distant to be resolved, the ejecta structure can't be directly imaged, and asymmetry must be inferred from signatures in the spectral features and polarization of the supernova light. The empirical interpretation of this data, however, is rather limited--to learn more about the detailed supernova geometry, theoretical modeling must been undertaken. One expects the geometry to be closely tied to the explosion mechanism and the progenitor star system, both of which are still under debate. Studying the 3-dimensional structure of supernovae should therefore provide new break throughs in our understanding. The goal of this thesis is to advance new techniques for calculating radiative transfer in 3-dimensional expanding atmospheres, and use them to study the flux and polarization signatures of aspherical supernovae. We develop a 3-D Monte Carlo transfer code and use it to directly fit recent spectropolarimetric observations, as well as calculate the observable properties of detailed multi-dimensional hydrodynamical explosion simulations. While previous theoretical efforts have been restricted to ellipsoidal models, we study several more complicated configurations that are tied to specific physical scenarios. We explore clumpy and toroidal geometries in fitting the spectropolarimetry of the Type Ia supernova SN 2001el. We then calculate the observable consequences of a supernova that has been rendered asymmetric by crashing into a nearby companion star. Finally, we fit the spectrum of a peculiar and extraordinarily luminous Type Ic supernova. The results are brought to bear on three broader astrophysical questions: (1) What are the progenitors and the explosion processes of Type Ia supernovae? (2) What effect does asymmetry have on the observational diversity of Type Ia supernovae, and hence their use in cosmology? (3) And , what are some of ...
Date: May 21, 2004
Creator: Kasen, Daniel Nathan
Partner: UNT Libraries Government Documents Department

Nuclear magnetic resonance studies of quadrupolar nuclei and dipolar field effects

Description: Experimental and theoretical research conducted in two areas in the field of nuclear magnetic resonance (NMR) spectroscopy is presented: (1) studies of the coherent quantum-mechanical control of the angular momentum dynamics of quadrupolar (spin I > 1/2) nuclei and its application to the determination of molecular structure; and (2) applications of the long-range nuclear dipolar field to novel NMR detection methodologies.The dissertation is organized into six chapters. The first two chapters and associated appendices are intended to be pedagogical and include an introduction to the quantum mechanical theory of pulsed NMR spectroscopy and the time dependent theory of quantum mechanics. The third chapter describes investigations of the solid-state multiple-quantum magic angle spinning (MQMAS) NMR experiment applied to I = 5/2 quadrupolar nuclei. This work reports the use of rotary resonance-matched radiofrequency irradiation for sensitivity enhancement of the I = 5/2 MQMAS experiment. These experiments exhibited certain selective line narrowing effects which were investigated theoretically.The fourth chapter extends the discussion of multiple quantum spectroscopy of quadrupolar nuclei to a mostly theoretical study of the feasibility of enhancing the resolution of nitrogen-14 NMR of large biomolecules in solution via double-quantum spectroscopy. The fifth chapter continues to extend the principles of multiple quantum NMR spectroscopy of quadrupolar nuclei to make analogies between experiments in NMR/nuclear quadrupolar resonance (NQR) and experiments in atomic/molecular optics (AMO). These analogies are made through the Hamiltonian and density operator formalism of angular momentum dynamics in the presence of electric and magnetic fields.The sixth chapter investigates the use of the macroscopic nuclear dipolar field to encode the NMR spectrum of an analyte nucleus indirectly in the magnetization of a sensor nucleus. This technique could potentially serve as an encoding module for the recently developed NMR remote detection experiment. The feasibility of using hyperpolarized xenon-129 gas as a sensor is ...
Date: December 21, 2004
Creator: Urban, Jeffry Todd
Partner: UNT Libraries Government Documents Department

Development of extreme ultraviolet and soft x-ray multilayer optics for scientific studies with femtosecond/attosecond sources

Description: The development of multilayer optics for extreme ultraviolet (EUV) radiation has led to advancements in many areas of science and technology, including materials studies, EUV lithography, water window microscopy, plasma imaging, and orbiting solar physics imaging. Recent developments in femtosecond and attosecond EUV pulse generation from sources such as high harmonic generation lasers, combined with the elemental and chemical specificity provided by EUV radiation, are opening new opportunities to study fundamental dynamic processes in materials. Critical to these efforts is the design and fabrication of multilayer optics to transport, focus, shape and image these ultra-fast pulses This thesis describes the design, fabrication, characterization, and application of multilayer optics for EUV femtosecond and attosecond scientific studies. Multilayer mirrors for bandwidth control, pulse shaping and compression, tri-material multilayers, and multilayers for polarization control are described. Characterization of multilayer optics, including measurement of material optical constants, reflectivity of multilayer mirrors, and metrology of reflected phases of the multilayer, which is critical to maintaining pulse size and shape, were performed. Two applications of these multilayer mirrors are detailed in the thesis. In the first application, broad bandwidth multilayers were used to characterize and measure sub-100 attosecond pulses from a high harmonic generation source and was performed in collaboration with the Max-Planck institute for Quantum Optics and Ludwig- Maximilians University in Garching, Germany, with Professors Krausz and Kleineberg. In the second application, multilayer mirrors with polarization control are useful to study femtosecond spin dynamics in an ongoing collaboration with the T-REX group of Professor Parmigiani at Elettra in Trieste, Italy. As new ultrafast x-ray sources become available, for example free electron lasers, the multilayer designs described in this thesis can be extended to higher photon energies, and such designs can be used with those sources to enable new scientific studies, such as molecular bonding, phonon, ...
Date: May 21, 2009
Creator: Aquila, Andrew Lee
Partner: UNT Libraries Government Documents Department

On Decays of B Mesons to a Strange Meson and an Eta or Eta' Meson at Babar

Description: We describe studies of the decays of B mesons to final states {eta}K{sup *}(892), {eta}K{sup *}{sub 0}(S-wave), {eta}K{sup *}{sub 2}(1430), and {eta}'K based on data collected with the BABAR detector at the PEP-II asymmetric-energy e{sup +}e{sup -} collier at the Stanford Linear Accelerator Center. We measure branching fractions and charge asymmetries for the decays B {yields} {eta}K{sup *}, where K{sup *} indicates a spin 0, 1, or 2 K{pi} system, making first observations of decays to final states {eta}K{sup *0}{sub 0}(S-wave), {eta}K{sup *+}{sub 0} (S-wave), and {eta}K{sup *0}{sub 2}(1430). We measure the time-dependent CP-violation parameters S and C for the decays B{sup 0} {yields} {eta}'K{sup 0}, observing CP violation in a charmless B decay with 5{sigma} significance considering both statistical and systematic uncertainties..
Date: April 21, 2009
Creator: Hirschauer, James Francis
Partner: UNT Libraries Government Documents Department