1,473 Matching Results

Search Results

Reduction Mills in Montana in 1925

Description: List of reduction mills in Montana, compiled in the course of investigations of mineral resources of Montana. It includes information about each loaction including: the process, character of ore, when the mill was operated, and custom work; equipment and power used; and capacity in tons.
Date: March 1927
Creator: Gerry, C. N.
Partner: UNT Libraries Government Documents Department

Ocher and Ochery Earths

Description: Report about ocher or ochery earth, "a natural mineral pigment composed largely of clay permeated with hydrated iron (ferric oxide)" (p. 2). It includes information about the uses of choer, substitutes, artificial ocher, mining and local deposits, import and export of ocher, and related information.
Date: May 1929
Creator: Santmyers, R. M.
Partner: UNT Libraries Government Documents Department

Problems Facing Coal Mining and Gas Production in the Hartshorne Coalbeds of the Western Arkoma Basin, Oklahoma

Description: This report provides pertinent geologic information for long-range planning of subsurface coal and gas production from the Hartshorne Coalbeds. Problems encountered include the complex distribution of minable and un-minable coal, high methane content and bed pressure, faulting, variations in degree of dip, presence of natural gas fields in associated sandstones, and legal problems.
Date: 1983
Creator: Iannacchione, Anthony T.
Partner: UNT Libraries Government Documents Department

Investigation of Lower Coal Beds in Georges Creek and North Part of Upper Potomac Basins, Allegany and Garrett Counties, Maryland: Reserves, Petrographic and Chemical Characteristics of Coals, and Stratigraphy of Area

Description: Report presenting the results of an investigation into various charactaristics that could increase the output lower, thinner coal beds, to replace the upper coal beds which are nearing exhaustion.
Date: 1949
Creator: Toenges, Albert L.; Turnbull, Louis A.; Williams, Lloyd & Smith, H. L.
Partner: UNT Libraries Government Documents Department

Structural Analysis of a Mechanized LHD Trench Undercut Caving System

Description: Abstract: This U. S. Bureau of Mines (USBM) report presents results of stress analyses and field observations to investigate the effects of elevated trench drifts on the structural stability of rock mass zones surrounding a production draw drift in a mine utilizing a mechanized load-haul-dump (LHD) trench undercut panel caving system. A two-dimensional boundary-element mine stress model was developed to predict the locations and extent of damaged rock mass zones surrounding draw drifts where adjacent, parallel trench drifts are either elevated or not elevated above the LHD production draw drift level. A Mohr-Coulomb shear-failure criterion was obtained directly from in situ borehole shear test data. Hoek-Brown shear-failure parameter values were computed from borehole-shear and triaxial test data. A procedure is described to estimate these parameters when a rock mass rating (RMR) value and triaxial data on intact samples exist, and no borehole shear test data exist. Results indicate that trench drifts, elevated to the level equal to the height of the LHD production draw drift, would not minimize material damage nor significantly enhance the stability of rib and crown pillar zones surrounding production draw drifts in the mechanized LHD trench undercut caving panel investigated at this mine.
Date: 1995
Creator: Jude, Charles V.
Partner: UNT Libraries Government Documents Department

Effects of Remote Drop and Pumpdown Placement on Cellular Concrete

Description: Abstract: The hazards to the public posed by abandoned mine shafts are well documented. As private development encroaches on previously mined areas, the potential for fatalities and serious injuries from abandoned mine shafts increases. The U.S. Bureau of Mines has conducted research into cellular concrete as a material for sealing these openings. The current work involves testing the characteristics of cellular concrete before and after it had been pumped or dropped from different heights into a simulated mine shaft. Cellular concrete was pumped vertically up to and subsequently dropped from heights of 18 and 37 m into concrete forms. Wet density measurements were made at multiple sampling points in the test circuit. Air content determinations and uniaxial compressive strength testing were conducted. Research results showed significant loss in air content and changes in the characteristics of cellular concrete during pumping or dropping from various heights. Recommendations on effective use of cellular concrete for sealing abandoned mine shafts are made.
Date: 1995
Creator: Boreck, D. L. & Miller, R. E.
Partner: UNT Libraries Government Documents Department

Improved Performance of Linear Coal Cutting Compared with Rotary Cutting

Description: From abstract: The linear cutting system, developed by the U.S. Bureau of Mines, uses geometric principles developed by Cardan to produce a nearly constant cut depth. The new system has been extensively tested in a synthetic material under laboratory conditions to verify mechanical capability and to identify operational characteristics. This report details the improved performance versus rotary cutting.
Date: 1995
Creator: Roepke, Wallace W.; Hanson, B. D.; Olson, R. C.; Wingquist, C. F. & Myren, T. A.
Partner: UNT Libraries Government Documents Department

High-Temperature Cyanide Leaching of Platinum-Group Metals from Automobile Catalysts--Pilot Plant Study

Description: From abstract: The U.S. Bureau of Mines Reno Research Center investigated, developed, and patented a high temperature cyanide leaching process for recovering platinum-group metals (PGM) from automobile catalysts. A batch pilot plant was constructed at the center and operated to demonstrate this technology to industry.
Date: 1995
Creator: Kuczynski, R. J.; Atkinson, G. B. & Dolinar, W. J.
Partner: UNT Libraries Government Documents Department

Development of Coal Combustion Sensitivity Tests for Smoke Detectors

Description: Standard smoldering and flaming combustion tests using small coal samples have been developed by the U.S. Bureau of Mines as a method to evaluate the response of a smoke detector. The tests are conducted using a standard smoke box designed and constructed according to Underwriters Laboratories. The tests provide a standard, easily reproducible smoke characteristic for smoldering and flaming coal combustion, based upon a comparison of the smoke optical density and the response of a standard ionization chamber to the smoke. With these standard tests, the range of threshold limits for the response of a smoke detector and the detector's reliability can be evaluated for nearly identical smoke visibility and smoke physical characteristics. The detector's threshold response limits and reliability need to be well defined prior to the instrument's use as part of a mine fire warning system for improved mine safety.
Date: 1995
Creator: Edwards, John C. & Morrow, Gerald S.
Partner: UNT Libraries Government Documents Department

Reactivity in the South Spoils and Hillside Dump at the Midnite Mine

Description: The Midnite Mine is an inactive open-pit uranium mine located on the Spokane Indian Reservation in Washington State. Drill samples from two large waste rock dumps on the site, known as South Spoils and Hillside Dump, were collected with a Becker hammer drill and evaluated to determine potential of the rock to generate acid mine drainage (AMD). Waste rock at this mine contains both pyrite and uranium, and AMD effects are more complicated on this site than most in that uranium is soluble in both acidic and neutral aqueous solutions. Although AMD protocols identified 26% of the South Spoils samples as potentially acid, under 7% of the spoil samples were actually producing acid. Considerable calcite exists in the South Spoils, and weathering feldspars further contribute to acid neutralization. The Hillside Dump has low concentrations of pyrite and calcite that acid-base accounting protocols would predict to be non-acidic. Accumulation of sulfate in rocks with concentrations of less than 0.3% S causes some of those normally non-acid producing rocks to produce acid in the Hillside Dump.
Date: 1996
Creator: Moore, Bruce W.; Price, Jesse W. & Gardner, Ted
Partner: UNT Libraries Government Documents Department

Data Dictionary and Discussion for the Midnite Mine GIS Database

Description: Abstract: A geographic information system (GIS) database has been developed by the U.S. Bureau of Mines (USBM) for the Midnite Mine and surroundings in northeastern Washington State (Stevens County) on the Spokane Indian Reservation. The mine is an open pit uranium mine which has been inactive since 1981. The GIS database was compiled to serve as a repository and source of historical and research information on the mine site. The database supported USBM hydrological and reclamation research on the mine site. The database also will be used by the Bureau of Land Management and the Bureau of Indian Affairs (as well as others) for environmental assessment and reclamation planning for future remediation and reclamation of the site. This report describes the data in the GIS database and their characteristics. The report also discusses known backgrounds on the data sets and any special considerations encountered by the USBM in developing the database. Most of the database also is planned to be available to the public as a two-CD-ROM set, although separately from this report.
Date: 1996
Creator: Peters, Douglas C.; Smith, M. Antoinette & Ferderer, David A.
Partner: UNT Libraries Government Documents Department

Inflatable Devices for Use in Combating Mine Fires

Description: Abstract: The U.S. Bureau of Mines is conducting full-scale laboratory studies on the development of lightweight inflatable devices that can be used for rapidly isolating mine fire areas to allow for fire suppression and/or personnel escape. These inflatable devices were able to stop airflows of over 1,100 m3/min within several minutes. The remotely installed bag was designed to rapidly isolate the fire zone and to then serve, if necessary, as a containment form for the remote injection of low-dersil organic or inorganic foams. Other inflatable bag concepts that were tested include an inflatable feed-tube seal for high-expansion foam generators and a positive pressure inflatable walk-through escape device. Laboratory studies indicated that a high-expansion foam plug will travel 183 m through an entry with a 4.5 pct rise in elevation before foam leakage from around the inflatable feed-tube seal. Additionally, the positive-pressure, inflatable walk-through escape device with its "pass-through" feature may allow extra time for personnel evacuation. All of these inflatable devices have shown merit during laboratory studies in providing a rapid method for isolation of a mine fire prior to suppressant foam injection or personnel escape.
Date: 1996
Creator: Weiss, E. S.; Conti, R. S.; Bazala, E. M. & Pro, R. W.
Partner: UNT Libraries Government Documents Department

Real-Time Monitoring of Field Measurements for Mine Design: Greens Creek Mine, Admiralty Island, Alaska

Description: Abstract: Researchers at the U.S. Bureau of Mines conducted field investigations at the Greens Creek Mine in southeast Alaska for the purpose of validating computer design of mining methods and assessing real-time monitoring capabilities. The field study required the application of new technology because of the remoteness of the study site, the need for timely acquisition of data, and a limited budget for instruments and data acquisition. Various sensors were installed to monitor rock mass deformation and strain, temperature, SO gas emissions, and blasting. Data were collected through a distributed personal computer network and high-speed modems. These readings were used to develop visualization models of underground metal mining operations and drift-and-fill mining and real-time graphics displays of ground conditions. Results of the field tests showed that it is possible to gather, process, visualize, and verify mine designs on a real-time basis.
Date: 1996
Creator: Orr, T. J. & Beus, Michael J.
Partner: UNT Libraries Government Documents Department

1995 Midnite Mine Radiation Survey

Description: Abstract: During the week of September 4, 1995, personnel from the U.S. Bureau of Mines conducted a Ra-226 survey at the Midnite Mine. One hundred thirty measurements were made on a rectangular grid with 150-m spacings. Concurrently, Shepherd Miller, Inc., took gross gamma readings in gR/h at the same grid points. In addition, the USBM collected 17 soil samples to be analyzed for radium, thorium, and potassium. The results of this survey are summarized in this report.
Date: 1996
Creator: Stroud, William P. & Droullard, Robert F.
Partner: UNT Libraries Government Documents Department

Groundwater Flow Model (GWFM) Development, Midnite Mine, Wellpinit, Washington

Description: This Report of Investigations (RI) is one of several describing work that has been completed by the U.S. Bureau of Mines at the Midnite uranium mine, Wellpinit, WA. Dean (in preparation) describes the entire project history. Four diskettes containing three archives compressed using WINZIP (or PKZIP) accompany the current RI. The ultimate purpose of this research effort was to develop a groundwater flow model (GWFM) for the Midnite Mine that can be utilized by the contractor preparing the Environmental Impact Statement (EIS) and by other interested parties. The objectives of this study were to (1) develop a shell model of the geology at the site, (2) develop the basis for a GWFM that will meet criteria described elsewhere in this RI and that can be updated with new information generated during the EIS process, and (3) present the results of two steady-state simulations of groundwater flow within the bedrock units. The current GWFM generates nonunique solutions because flow data for the bedrock units currently do not exist. However, the model provides useful results with respect to direction of flow. More data are required to model the bedrock aquifer system accurately. Volmnetric flow rates of the bedrock units should be measured or estimated. Measurements obtained from one or two drains completed in the bedrock in the southern portion of the site should yield these values.
Date: 1996
Creator: Kirschner, Frederick E.
Partner: UNT Libraries Government Documents Department

U.S. Bureau of Mines Final Report : Midnite Mine Water Treatment Studies

Description: The U.S. Bureau of Mines reviewed and evaluated options for treatment of the approximately 500 million gallons of contaminated water in flooded pits at the Midnite Mine on the Spokane Indian Reservation. While current lime treatment produces discharge quality water, the resultant sludges are radioactive, presenting a disposal problem. Of the 24 commercial processes and seven emerging technologies evaluated, none demonstrated a significant advantage over ion exchange using a strong base anion exchange resin in either laboratory or field tests. Uranium was lowered from 22 ppm to 0.2 ppb in treated water. Radium was lowered from 44 pCi/L to <1 pCi/L using a modified precipitation with BaCl2 . The natural zeolite, clinoptilolite, lowered radium to 6-8 pCi/L when used as an ion exchanger.
Date: 1996
Creator: Schultze, L. E.; Nilsen, D. N.; Isaacson, A. E. & Lahoda, E. J.
Partner: UNT Libraries Government Documents Department