27 Matching Results

Search Results

Results: 1 - 24 next
open access

Correlation, Evaluation, and Extension of Linearized Theories for Tire Motion and Wheel Shimmy

Description: "An evaluation is made of the existing theories of a linearized tire motion and wheel shimmy. It is demonstrated that most of the previously published theories represent varying degrees of approximation to a summary theory developed in this report which is a minor modification of the basic theory of Von Schlippe and Dietrich. In most cases where strong differences exist between the previously published theories and summary theory, the previously published theories are shown to possess certain d… more
Date: January 13, 1956
Creator: Smiley, Robert F.
Partner: UNT Libraries Government Documents Department
open access

Restraint provided a flat rectangular plate by a sturdy stiffener along an edge of the plate

Description: From Summary: "A sturdy stiffener is defined as a stiffener of such proportions that it does not suffer cross-sectional distortion when moments are applied to some part of the cross section. When such a stiffener is attached to one edge of a plate, it will resist rotation of that edge of the plate by means of its torsional properties. A formula is given for the restraint coefficient provided the plate by such a stiffener. This coefficient is required for the calculation of the critical compress… more
Date: March 13, 1941
Creator: Lundquist, Eugene E. & Stowell, Elbridge Z.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Tests of Four- and Six-Blade Single- and Dual-Rotating Tractor Propellers

Description: "Test of 10-foot diameter, four and six blade single-rotating and dual-rotating propellers were conducted in the NACA propeller-research tunnel. The propellers were mounted at the front end of a streamline body incorporating spinners to house the hub portions. The effect of a symmetrical wing mounted in the slipstream ranged from 20 degrees to 65 degrees setting corresponds to airplane speeds greater than 500 miles per hour. The results indicate that dual-rotating propellers were from 0 to 6 pe… more
Date: July 13, 1942
Creator: Biermann, David & Hartman, Edwin P.
Partner: UNT Libraries Government Documents Department
open access

Prediction of the Effects of Propeller Operation on the Static Longitudinal Stability of Single-Engine Tractor Monoplanes with Flaps Retracted

Description: "The effects of propeller operation on the static longitudinal stability of single-engine tractor monoplanes are analyzed, and a simple method is presented for computing power-on pitching-moment curves for flap-retracted flight conditions. The methods evolved are based on the results of powered-model wind-tunnel investigations of 28 model configurations. Correlation curves are presented from which the effects of power on the downwash over the tail and the stabilizer effectiveness can be rapidly… more
Date: July 13, 1948
Creator: Weil, Joseph & Sleeman, William C., Jr.
Partner: UNT Libraries Government Documents Department
open access

Effect of afterbody length and keel angle on minimum depth of step for landing stability and on take-off stability of a flying boat

Description: From Summary: "Tests were made to fill partly the need for information on the effect of afterbody dimensions on the hydrodynamic stability of a flying boat in smooth water. The dimensions investigated were depth of step, angle of afterbody keel, and length of afterbody. An analysis of the data showed that as either the afterbody length or keel angle was increased an accompanying increase in depth of step was required in order to maintain adequate landing stability."
Date: November 13, 1947
Creator: Olson, Roland E. & Land, Norman S.
Partner: UNT Libraries Government Documents Department
open access

The Flow of a Compressible Fluid Past a Curved Surface

Description: "An iteration method is employed to obtain the flow of a compressible fluid past a curved surface. The first approximation which leads to the Prandtl-Glauert rule, is based on the assumption that the flow differs but little from a pure translation. The iteration process then consists in improving this first approximation in order that it will apply to a flow differing from pure translatory motion to a greater degree. The method fails when the Mach number of the undisturbed stream reaches unity … more
Date: September 13, 1943
Creator: Kaplan, Carl
Partner: UNT Libraries Government Documents Department
open access

Jet-boundary corrections for reflection-plane models in rectangular wind tunnels

Description: A detailed method for determining the jet-boundary corrections for reflection-plane models in rectangular wind tunnels is presented. The method includes the determination of the tunnel span local distribution and the derivation of equations for the corrections to the angle of attack, the lift and drag coefficients, and the pitching-, rolling-, yawing-, and hinge-moment coefficients. The principle effects of aerodynamic induction and of the boundary-induced curvature of the streamlines have been… more
Date: April 13, 1943
Creator: Swanson, Robert S. & Toll, Thomas A.
Partner: UNT Libraries Government Documents Department
open access

Determination of general relations for the behavior of turbulent boundary layers

Description: From Summary: "An analysis has been made of a considerable amount of data for turbulent boundary layers along wings and bodies of various shapes in order to determine the fundamental variables that control the development of turbulent boundary layers. It was found that the type of velocity distribution in the boundary layer could be expressed in terms of a single parameter. This parameter was chosen as the ratio of the displacement thickness to the momentum thickness of the boundary layer. The … more
Date: April 13, 1943
Creator: von Doenhoff, Albert E. & Tetervin, Neal
Partner: UNT Libraries Government Documents Department
open access

Method for calculating lift distributions for unswept wings with flaps or ailerons by use of nonlinear section lift data

Description: A method is presented which allows the use of nonlinear section lift data in the calculation of the spanwise lift distribution of unswept wings with flaps or ailerons. This method is based upon lifting line theory and is an extension to the method described in NACA rep. 865. The mathematical treatment of the discontinuity in absolute angle of attack at the end of the flap or aileron involves the use of a correction factor which accounts for the inability of a limited trigonometric series to rep… more
Date: November 13, 1950
Creator: Sivells, James C. & Westrick, Gertrude C.
Partner: UNT Libraries Government Documents Department
open access

Method of analysis for compressible flow through mixed-flow centrifugal impellers of arbitrary design

Description: A method is presented for analysis of the compressible flow between the hub and the shroud of mixed-flow impellers of arbitrary design. Axial symmetry was assumed, but the forces in the meridional (hub to shroud) plane, which are derived from tangential pressure gradients, were taken into account. The method was applied to an experimental mixed-flow impeller. The analysis of the flow in the meridional plane of the impeller showed that the rotational forces, the blade curvature, and the hub-shro… more
Date: April 13, 1950
Creator: Hamrick, Joseph T.; Ginsburg, Ambrose & Osborn, Walter M.
Partner: UNT Libraries Government Documents Department
open access

On flow of electrically conducting fluids over a flat plate in the presence of a transverse magnetic field

Description: The use of a magnetic field to control the motion of electrically conducting fluids is studied. The incompressible boundary-layer solutions are found for flow over a flat plate when the magnetic field is fixed relative to the plate or to the fluid. The equations are integrated numerically for the effect of the transverse magnetic field on the velocity and temperature profiles, and hence, the skin friction and rate of heat transfer. It is concluded that the skin friction and the heat-transfer ra… more
Date: March 13, 1957
Creator: Rossow, Vernon J.
Partner: UNT Libraries Government Documents Department
open access

Effect of chord size on weight and cooling characteristics of air-cooled turbine blades

Description: An analysis has been made to determine the effect of chord size on the weight and cooling characteristics of shell-supported, air-cooled gas-turbine blades. In uncooled turbines with solid blades, the general practice has been to design turbines with high aspect ratio (small blade chord) to achieve substantial turbine weight reduction. With air-cooled blades, this study shows that turbine blade weight is affected to a much smaller degree by the size of the blade chord.
Date: November 13, 1956
Creator: Esgar, Jack B.; Schum, Eugene F. & Curren, Arthur N.
Partner: UNT Libraries Government Documents Department
open access

Determination of Mean Camber Surfaces for Wings Having Uniform Chordwise Loading and Arbitrary Spanwise Loading in Subsonic Flow

Description: "The field of a uniformly loaded wing in subsonic flow is discussed in terms of the acceleration potential. It is shown that, for the design of such wings, the slope of the mean camber surface at any point can be determined by a line integration around the wing boundary. By an additional line integration around the wing boundary, this method is extended to include the case where the local section lift coefficient varies with spanwise location (the chordwise loading at every section still remain… more
Date: January 13, 1953
Creator: Katzoff, S.; Faison, M. Frances & DuBose, Hugh C.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation of Spoiler, Deflector, and Slot Lateral-Control Devices on Wings With Full-Span Split and Slotted Flaps

Description: Report presents the results of an extensive investigation made in the NACA 7 by 10-foot wind tunnel of spoiler, deflector, and slot types of lateral-control device on wings with full-span split and slotted flaps. The static rolling and yawing moments were determined for all the devices tested, and the static hinge moments and the time response were determined for a few devices of each type.
Date: August 13, 1940
Creator: Wenzinger, Carl J. & Rogallo, Francis M.
Partner: UNT Libraries Government Documents Department
open access

Theoretical and Experimental Analysis of Low-Drag Supersonic Inlets Having a Circular Cross Section and a Central Body at Mach Numbers 3.30, 2.75, and 2.45

Description: Contains theoretical and experimental analysis of circular inlets having a central body at Mach numbers of 3.30, 2.75, and 2.45. The inlets have been designed in order to have low drag and high pressure recovery. The pressure recoveries obtained are of the same order of magnitude as those previously obtained by inlets having very large external drag.
Date: August 13, 1948
Creator: Ferri, Antonio & Nucci, Louis M.
Partner: UNT Libraries Government Documents Department
open access

An Analysis of Longitudinal Stability in Power-Off Flight With Charts for Use in Design

Description: "This report presents a discussion of longitudinal stability in gliding flight together with a series of charts with which the stability characteristics of any airplane may be readily estimated. The relationships governing stability characteristics are derived from equations of equilibrium referred to moving axes that are tangent and perpendicular to the instantaneous flight path. It is shown that instability of the motion can arise only through an increase of linear and angular momentum in the… more
Date: December 13, 1934
Creator: Zimmerman, Charles H.
Partner: UNT Libraries Government Documents Department
open access

Experiments on the distribution of fuel in fuel sprays

Description: The distribution of fuel in sprays for compression-ignition engines was investigated by taking high-speed spark photographs of fuel sprays reproduced under a wide variety of conditions, and also by injecting them against pieces of plasticine. A photographic study was made of sprays injected into evacuated chambers, into the atmosphere, into compressed air, and into transparent liquids. Pairs of identical sprays were injected counter to each other and their behavior analyzed. Small high velocity… more
Date: February 13, 1932
Creator: Lee, Dana W.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Research Comparing Lateral Control Devices, Particularly at High Angles of Attack 5: Spoilers and Ailerons on Rectangular Wings

Description: "This report covers the fifth of a series of systematic investigations in which lateral control devices are compared with particular reference to their effectiveness at high angles of attack. The present report deals with tests of spoilers and ordinary ailerons on rectangular Clark Y wing models. In an effort to obtain satisfactory control throughout the entire angle-of-attack range that can be maintained in flight, various spoilers were tested in combination with two sizes of previously tested… more
Date: June 13, 1932
Creator: Weick, Fred E. & Shortal, Joseph A.
Partner: UNT Libraries Government Documents Department
open access

The N.A.C.A. Full-Scale Wind Tunnel

Description: This report gives a complete description of the full-scale wind tunnel of the National Advisory Committee for Aeronautics.
Date: March 13, 1933
Creator: DeFrance, Smith J.
Partner: UNT Libraries Government Documents Department
open access

Performance of a fuel-injection spark-ignition engine using a hydrogenated safety fuel

Description: This report presents the performance of a single-cylinder test engine using a hydrogenated safety fuel. The safety fuel has a flash point of 125 degrees f. (Cleveland open-dup method), which is high enough to remove most of the fire hazard, and an octane number of 95, which permits higher compression ratios to be used than are permissible with most undoped gasolines.
Date: June 13, 1933
Creator: Schey, Oscar W. & Young, Alfred W.
Partner: UNT Libraries Government Documents Department
open access

Effect of Viscosity on Fuel Leakage Between Lapped Plungers and Sleeves and on the Discharge From a Pump-Injection System

Description: "Test data and analysis show that the rate of fuel leakage between a lapped plunger and sleeve varies directly with the density of the fuel, the diameter of the plunger, the pressure producing the leakage, and the cube of the mean clearance between the plunger and sleeve. The rate varies inversely as the length of the lapped fit and the viscosity of the fuel. With a mean clearance between the plunger and sleeve of 0.0001 inch the leakage amounts to approximately 0.2 percent of the fuel injected… more
Date: December 13, 1933
Creator: Rothrock, A. M. & Marsh, E. T.
Partner: UNT Libraries Government Documents Department
open access

Wing-Fuselage Interference, Tail Buffeting, and Air Flow About the Tail of a Low-Wing Monoplane

Description: "This report presents the results of wind tunnel tests on a Mcdonnell Douglas airplane to determine the wing-fuselage interference of a low-wing monoplane. The tests included a study of tail buffeting and the air flow in the region of the tail. The airplane was tested with and without the propeller slipstream, both in the original condition and with several devices designed to reduce or eliminate tail buffeting. The devices used were wing-fuselage fillets, a NACA cowling, reflexed trailing edge… more
Date: December 13, 1933
Creator: White, James A. & Hood, Manley J.
Partner: UNT Libraries Government Documents Department
open access

The Elimination of Fire Hazard Due to Back Fires

Description: "A critical study was made of the operation of a type of back-fire arrester used to reduce the fire hazard of aircraft engines. A flame arrester consisting of a pack or plug of alternate flat and corrugated plates of thin metal was installed in the intake pipe of a gasoline engines; an auxiliary spark plug inserted in the intake manifold permitted the production of artificial back fires at will. It was found possible to design a plug which prevented all back fires from reaching the carburetor" … more
Date: October 13, 1931
Creator: Theodorsen, Theodore & Freeman, Ira M.
Partner: UNT Libraries Government Documents Department
open access

The Effect of Supercharger Capacity on Engine and Airplane Performance

Description: This report presents the results of an investigation to determine the effect of different supercharger capacities on the performance of an airplane and its engine . The tests were conducted on a DH4-M2 airplane powered with a Liberty 12 engine. In this investigation four supercharger capacities, obtained by driving a roots type supercharger at 1.615, 1.957, 2.4, and 3 time engine speed, were used to maintain sea-level pressure at the carburetor to altitudes of 7,000, 11,500, 17,000, and 22,000 … more
Date: March 13, 1929
Creator: Schey, O. W. & Gove, W. D.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen