Search Results

Optimal Access Point Selection and Channel Assignment in IEEE 802.11 Networks

Description: Designing 802.11 wireless networks includes two major components: selection of access points (APs) in the demand areas and assignment of radio frequencies to each AP. Coverage and capacity are some key issues when placing APs in a demand area. APs need to cover all users. A user is considered covered if the power received from its corresponding AP is greater than a given threshold. Moreover, from a capacity standpoint, APs need to provide certain minimum bandwidth to users located in the coverage area. A major challenge in designing wireless networks is the frequency assignment problem. The 802.11 wireless LANs operate in the unlicensed ISM frequency, and all APs share the same frequency. As a result, as 802.11 APs become widely deployed, they start to interfere with each other and degrade network throughput. In consequence, efficient assignment of channels becomes necessary to avoid and minimize interference. In this work, an optimal AP selection was developed by balancing traffic load. An optimization problem was formulated that minimizes heavy congestion. As a result, APs in wireless LANs will have well distributed traffic loads, which maximize the throughput of the network. The channel assignment algorithm was designed by minimizing channel interference between APs. The optimization algorithm assigns channels in such a way that minimizes co-channel and adjacent channel interference resulting in higher throughput.
Date: December 2004
Creator: Park, Sangtae
Partner: UNT Libraries

Variability-aware low-power techniques for nanoscale mixed-signal circuits.

Description: New circuit design techniques that accommodate lower supply voltages necessary for portable systems need to be integrated into the semiconductor intellectual property (IP) core. Systems that once worked at 3.3 V or 2.5 V now need to work at 1.8 V or lower, without causing any performance degradation. Also, the fluctuation of device characteristics caused by process variation in nanometer technologies is seen as design yield loss. The numerous parasitic effects induced by layouts, especially for high-performance and high-speed circuits, pose a problem for IC design. Lack of exact layout information during circuit sizing leads to long design iterations involving time-consuming runs of complex tools. There is a strong need for low-power, high-performance, parasitic-aware and process-variation-tolerant circuit design. This dissertation proposes methodologies and techniques to achieve variability, power, performance, and parasitic-aware circuit designs. Three approaches are proposed: the single iteration automatic approach, the hybrid Monte Carlo and design of experiments (DOE) approach, and the corner-based approach. Widely used mixed-signal circuits such as analog-to-digital converter (ADC), voltage controlled oscillator (VCO), voltage level converter and active pixel sensor (APS) have been designed at nanoscale complementary metal oxide semiconductor (CMOS) and subjected to the proposed methodologies. The effectiveness of the proposed methodologies has been demonstrated through exhaustive simulations. Apart from these methodologies, the application of dual-oxide and dual-threshold techniques at circuit level in order to minimize power and leakage is also explored.
Date: May 2009
Creator: Ghai, Dhruva V.
Partner: UNT Libraries

Optimizing Non-pharmaceutical Interventions Using Multi-coaffiliation Networks

Description: Computational modeling is of fundamental significance in mapping possible disease spread, and designing strategies for its mitigation. Conventional contact networks implement the simulation of interactions as random occurrences, presenting public health bodies with a difficult trade off between a realistic model granularity and robust design of intervention strategies. Recently, researchers have been investigating the use of agent-based models (ABMs) to embrace the complexity of real world interactions. At the same time, theoretical approaches provide epidemiologists with general optimization models in which demographics are intrinsically simplified. The emerging study of affiliation networks and co-affiliation networks provide an alternative to such trade off. Co-affiliation networks maintain the realism innate to ABMs while reducing the complexity of contact networks into distinctively smaller k-partite graphs, were each partition represent a dimension of the social model. This dissertation studies the optimization of intervention strategies for infectious diseases, mainly distributed in school systems. First, concepts of synthetic populations and affiliation networks are extended to propose a modified algorithm for the synthetic reconstruction of populations. Second, the definition of multi-coaffiliation networks is presented as the main social model in which risk is quantified and evaluated, thereby obtaining vulnerability indications for each school in the system. Finally, maximization of the mitigation coverage and minimization of the overall cost of intervention strategies are proposed and compared, based on centrality measures.
Date: May 2013
Creator: Loza, Olivia G.
Partner: UNT Libraries

Metamodeling-based Fast Optimization of Nanoscale Ams-socs

Description: Modern consumer electronic systems are mostly based on analog and digital circuits and are designed as analog/mixed-signal systems on chip (AMS-SoCs). the integration of analog and digital circuits on the same die makes the system cost effective. in AMS-SoCs, analog and mixed-signal portions have not traditionally received much attention due to their complexity. As the fabrication technology advances, the simulation times for AMS-SoC circuits become more complex and take significant amounts of time. the time allocated for the circuit design and optimization creates a need to reduce the simulation time. the time constraints placed on designers are imposed by the ever-shortening time to market and non-recurrent cost of the chip. This dissertation proposes the use of a novel method, called metamodeling, and intelligent optimization algorithms to reduce the design time. Metamodel-based ultra-fast design flows are proposed and investigated. Metamodel creation is a one time process and relies on fast sampling through accurate parasitic-aware simulations. One of the targets of this dissertation is to minimize the sample size while retaining the accuracy of the model. in order to achieve this goal, different statistical sampling techniques are explored and applied to various AMS-SoC circuits. Also, different metamodel functions are explored for their accuracy and application to AMS-SoCs. Several different optimization algorithms are compared for global optimization accuracy and convergence. Three different AMS circuits, ring oscillator, inductor-capacitor voltage-controlled oscillator (LC-VCO) and phase locked loop (PLL) that are present in many AMS-SoC are used in this study for design flow application. Metamodels created in this dissertation provide accuracy with an error of less than 2% from the physical layout simulations. After optimal sampling investigation, metamodel functions and optimization algorithms are ranked in terms of speed and accuracy. Experimental results show that the proposed design flow provides roughly 5,000x speedup over conventional design flows. Thus, ...
Date: May 2012
Creator: Garitselov, Oleg
Partner: UNT Libraries

Theoretical Analysis of Drug Analogues and VOC Pollutants

Description: While computational chemistry methods have a wide range of applications within the set of traditional physical sciences, very little is being done in terms of expanding their usage into other areas of science where these methods can help clarify research questions. One such promising field is Forensic Science, where detailed, rapidly acquired sets of chemical data can help in decision-making at a crime scene. As part of an effort to create a database that fits these characteristics, the present work makes use of computational chemistry methods to increase the information readily available for the rapid identification and scheduling of drugs to the forensic scientist. Ab initio geometry optimizations, vibrational spectra calculations and ESI-MS fragmentation prediction of a group of common psychedelics are here presented. In addition, we describe an under development graphical user interface to perform ab initio calculations using the GAMESS software package in a more accessible manner. Results show that the set of theoretical techniques here utilized, closely approximate experimental data. Another aspect covered in this work is the implementation of a boiling point estimation method based on group contributions to generate chemical dispersion areas with the ALOHA software package. Once again, theoretical results showed to be in agreement with experimental boiling point values. A computer program written to facilitate the execution of the boiling point estimation method is also shown.
Date: August 2016
Creator: Garibay, Luis K
Partner: UNT Libraries

An Exploration of the Word2vec Algorithm: Creating a Vector Representation of a Language Vocabulary that Encodes Meaning and Usage Patterns in the Vector Space Structure

Description: This thesis is an exloration and exposition of a highly efficient shallow neural network algorithm called word2vec, which was developed by T. Mikolov et al. in order to create vector representations of a language vocabulary such that information about the meaning and usage of the vocabulary words is encoded in the vector space structure. Chapter 1 introduces natural language processing, vector representations of language vocabularies, and the word2vec algorithm. Chapter 2 reviews the basic mathematical theory of deterministic convex optimization. Chapter 3 provides background on some concepts from computer science that are used in the word2vec algorithm: Huffman trees, neural networks, and binary cross-entropy. Chapter 4 provides a detailed discussion of the word2vec algorithm itself and includes a discussion of continuous bag of words, skip-gram, hierarchical softmax, and negative sampling. Finally, Chapter 5 explores some applications of vector representations: word categorization, analogy completion, and language translation assistance.
Date: May 2016
Creator: Le, Thu Anh
Partner: UNT Libraries