43 Matching Results

Search Results

Liquid Metal Loops Irradiated on the ORNL Graphite Reactor and the LITR

Description: From abstract: Liquid alkali metals were circulated in a series of structural alloy loops under reactor radiation at high temperature. The first of these loops was a lithium-stainless steel (type 316) system, and the remainder were sodium-Inconel. No effect of radiation other than radioactivation was found. Mass transfer and metallurgical processes attributable to the operating temperatures were observed."
Date: June 1, 1959
Creator: Parkinson, W. W. & Sisman, O.
Partner: UNT Libraries Government Documents Department

Metallurgical Smoke

Description: From Introduction: "This bulletin is published by the bureau primarily for persons who seek information on the subject of metal-lurgical smoke but are unacquainted with the technical language of metallurgy. The effort is made in this paper to present the problem of metallurgical smoke as it actually exists, without bias of any kind."
Date: 1915
Creator: Fulton, Charles H.
Partner: UNT Libraries Government Documents Department

Mechanical Properties of Zircaloy-2

Description: Abstract: The mechanical and physical properties of Zircaloy-2 were determined as a function of five test variables: temperature, grain size, direction to rolling, hydrogen content, and the presence or absence of a notch.
Date: February 1, 1961
Creator: Mehan, R. L. & Wiesinger, F. W.
Partner: UNT Libraries Government Documents Department

Oak Ridge Metals and Ceramics Division Annual Progress Report: 1963

Description: Report documenting research and developments made by the Metals and Ceramic Division of the Oak Ridge National Laboratory. Progress is reported on fundamental research in: crystal physics, reactions at metal surfaces, spectroscopy of ionic media, structure of metals, theory of alloying, physical properties, sintering, deformation of crystalline solids, x ray diffraction, metallurgy of superconducting materials, and electron microscope studies. Long-randge applied research studies were conducted for: zirconium metallurgy, materials compatibility, solid reactions, fuel element development, mechanical properties, non-destructive testing, and high-temperature materials. Reactor development support work was carried out for: gas-cooled reactor program, molten-salt reactor, high-flux isotope reactor, space-power program, thorium-utilization program, advanced-test reactor, Army Package Power Reactor, Enrico Fermi fast-breeder reactor, and water desalination program. Other program activities, for which research was conducted, included: thermonuclear project, transuraniunn program, and post-irradiation examination laboratory. Separate abstracts were prepared for 30 sections of the report. (B.O.G.)
Date: November 11, 1963
Creator: Oak Ridge National Laboratory. Metals and Ceramics Division.
Partner: UNT Libraries Government Documents Department

The Metallurgy of Quicksilver

Description: From General Conclusions: "The main conclusions to be drawn from the work discussed in this bulletin may be summarized as follows: In the direct-furnace treatment of quicksilver ores the major problem in the extraction of quicksilver has been solved. Methods are available whereby low-grade ore can be treated with a remarkably high recovery and at low cost in view of small scale of operations at most plants."
Date: 1925
Creator: Duschak, L. H. & Schuette, C. N.
Partner: UNT Libraries Government Documents Department

The Principles and Practice of Sampling Metallic Metallurgical Materials: with Special Reference to the Sampling of Copper Bullion

Description: From Introduction: "In this report considerable space has been devoted to general and theoretical principles on the ground that under modern conditions the best results in any field of activity can be attained only with the aid of an adequate knowledge of the best theories underlying the practice. The diffusion of such knowledge in the field of sampling metallic metallurgical materials appears to have been quite insufficient, and it is felt that when the principles involved are once thoroughly comprehended their universal application will be appreciated, so it will make no difference whether pig iron of gold bullion is offered for test. "
Date: 1916
Creator: Keller, Edward
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 13. High-Temperature Heat-Content, Heat-Capacity, and Entropy Data for the Elements and Inorganic Compounds

Description: From Introduction: "This publication as its title indicates, contains high-temperature heat-content, heat-capacity, and entropy data for the elements and inorganic compounds. The available experimental and calculated values were compiled and intercompared, and a selection of "best" values was made. The heat-content data are given in tabular form for use by those who make thermodynamic computations by means of tables, and in algebraic form for use by those who prefer equations."
Date: 1960
Creator: Kelley, K. K.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 10. High-temperature Heat-Content, Heat-Capacity, and Entropy Data for Inorganic Compounds

Description: From Introduction: "This work is both a revision and an elaboration of Bureau of Mines Bulletin 371, which was published in 1934 and included data available to October 1933. This bulletin purposes to collect and correlate all available high-temperature heat-content and specific-heat data for inorganic substances and to formulate tables and algebraic expressions for their representation. It is expected also that this bulletin will have value to those teaching courses in metallurgical and chemical thermodynamics."
Date: 1949
Creator: Kelley, K. K.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 14. Entropies of the Elements and Inorganic Compounds

Description: From Introduction: "The present bulletin covers data available through September 1959 and is a further elaboration and revision, made desirable by the fact that nearly 1,300 entropy values for inorganic substances at 298.15 degrees K. now are known as compared with 800 in the 1950 publication, which covered data available through October 1948. The present bulletin contains the currently pertinent explanatory matter that appeared in its predecessors."
Date: 1961
Creator: Kelley, K. K. & King, E. G.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 9. The Entropies of Inorganic Substances. Revision (1940) of Data and Methods of Calculation

Description: From Introduction: "This bulletin originally was planned as a second revision of the first member of this series, the first revision (249) having appeared in 1936; however, because of requests for the explanatory, section of the first bulletin from those teaching thermodynamics, it was decided to combine the information in the first bulletin and its revision with the data that have appeared since 1935 and to repeat the explanatory material in somewhat more detail. The purpose of this bulletin is therefore to give the available values of the entropies at 298.1 degrees K. of the elements and inorganic compounds, together with enough explanation of the methods employed in calculating entropies to make the results comprehensible."
Date: 1941
Creator: Kelley, K. K.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 5. Heats of Fusion of Inorganic Substances

Description: From Introduction: "Examples of the use of the derived heat-of-fusion values in the application of thermodynamics to problems concerning metallurgical practice are not given here, but the reader is referred to the textbook of Lewis and Randall (454), in which the methods and types of calculations are adequately portrayed, and to the papers of Maier (469, 470, 471), in which the application of thermodynamic methods to various problems of metallurgical interest has been illustrated and discussed."
Date: 1936
Creator: Kelley, K. K.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 1. The Entropies of Inorganic Substances

Description: From Introduction: "The present work is an attempt to collect all the available data referring to one important thermodynamic property and to supply sufficient discussion to make the results readily usable by metallurgists. In the study of chemical or metallurgical reactions two factors have predominant importance-the free energy of reaction and the speed of reaction. The subject of this publication is so closely allied to the former that may be well to consider briefly some of the uses to which free-energy data may be put."
Date: 1932
Creator: Kelley, K. K.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 2. High-Temperature Specific-Heat Equations for Inorganic Substances

Description: From introduction: "The present work reviews the available high-temperature thermal data on inorganic compounds and gives representative specific-heat equations valid at high temperatures for use in thermodynamic calculations."
Date: 1934
Creator: Kelley, K. K.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 4. Metal Carbonates--Correlations ans Applications of Thermodynamic Properties

Description: From Introduction: "This publication proposes to assemble existing thermodynamic data for carbonates and to correlate so far as possible the results of decomposition-pressure determinations with the calorimetrically determined heats of formation and entropy values on the one hand and with solubility and standard electrode-potential data on the other."
Date: 1935
Creator: Kelley, K. K. & Anderson, C. T.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 3. The Free Energies of Vaporization and Vapor Pressures of Inorganic Substances

Description: From Introduction: "It is the purpose of this present work (1) to apply the previously compiled entropy values and specific-heat equations to vapor-pressure and other pertinent data in obtaining heat and free energy of vaporization equations for inorganic substances valid up to the normal boiling or sublimation points (760 mm pressure), (2) to supplement wherever possible the data on heats and entropies of transformations and fusions, (3) to supplement wherever possible the data on heats and entropies of gases, and (4) to supply tables of vapor pressures for inorganic substances at various temperatures up to and including the boiling or sublimation point."
Date: 1935
Creator: Kelley, K. K.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 11. Entropies of Inorganic Substances: Revision (1948) of Data and Methods of Calculation

Description: From Introduction: "The present bulletin also contains all the pertinent explanatory matter that appeared in its predecessors. Thus, it retains the same dual purpose of assembling the available values of the entropies at 298.16 degrees K of the elements and inorganic compounds and giving enough explanation of methods of calculating entropies to make the results comprehensible."
Date: 1950
Creator: Kelley, K. K.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 6. A Revision of the Entropies of Inorganic Substances--1935

Description: From Introduction: "Moreover, a critical study of the existing vapor-pressure data made by the author (98) furnishes entropy of vaporization results suitable for obtaining approximate values of the entropies of a number of gases from the entropies of the solids or liquids. Consequently, it appears worth while at the present time to supplement the former publication, giving the new values now obtainable and making such revision in the older values as the data warrant."
Date: 1936
Creator: Kelley, K. K.
Partner: UNT Libraries Government Documents Department

Contributions to the Data on Theoretical Metallurgy: [Part] 12. Heats and Free Energies of Formation of Inorganic Oxides

Description: From Introduction: "This bulletin purposes to collect and compile, in readily usable form, heat and free-energy-of-formation data for inorganic oxides. Such data are used in evaluating heat balances in metallurgical processes, in appraising possible improvements in existing metal extractive methods, and as a guide in the search for better methods of producing metals of recent or possible future commercial interest."
Date: 1954
Creator: Coughlin, James P.
Partner: UNT Libraries Government Documents Department

Interim Report on Corrosion by Zirconium-Base Fluorides

Description: Report issued by the Oak Ridge National Laboratory discussing studies conducted on corrosion by fluorides. Equipment, procedures, results, and analysis is presented. This report includes tables, illustrations, and photographs.
Date: January 17, 1961
Creator: Adamson, G. M.; Crouse, R. S. & Manly, W. D.
Partner: UNT Libraries Government Documents Department

Annual Report for 1963: Metallurgy Division

Description: Report issued by the Argonne National Laboratory discussing work conducted by the Metallurgy Division during 1963. Annual experiments, programs, and studies are presented. This report includes tables, illustrations, and photographs.
Date: 1964
Creator: Foote, Frank G.; Chiswik, Haim H. & Macherey, Robert E.
Partner: UNT Libraries Government Documents Department