660 Matching Results

Search Results


Description: The purpose of this task was to determine if mixing was an issue for the entrainment and dispersion of the Modular Caustic Side Solvent Extraction (CSSX) Unit (MCU) solvent in the Defense Waste Processing Facility (DWPF) Strip Effluent Feed Tank (SEFT). The MCU strip effluent stream containing the Cs removed during salt processing will be transferred to the DWPF for immobilization in HLW glass. In lab-scale DWPF chemical process cell testing, mixing of the solvent in the dilute nitric acid solution proved problematic, and the Savannah River National Laboratory (SRNL) was requested to perform scaled SEFT mixing tests to evaluate whether the problem was symptomatic of the lab-scale set-up or of the solvent. The solvent levels tested were 228 and 235 ppm, which represented levels near the estimated DWPF solvent limit of 239 ppm in 0.001M HNO{sub 3} solution. The 239 ppm limit was calculated by Norato in X-CLC-S-00141. The general approach for the mixing investigation was to: (1) Investigate the use of fluorescent dyes to aid in observing the mixing behavior. Evaluate and compare the physical properties of the fluorescent dyed MCU solvents to the baseline Oak Ridge CSSX solvent. Based on the data, use the dyed MCU solvent that best approximates the physical properties. (2) Use approximately a 1/6th linear scale of the SEFT to replicate the internal configuration for DWPF mixing. (3) Determine agitator speed(s) for scaled testing based on the DWPF SEFT mixing speed. (4) Perform mixing tests using the 1/6th SEFT and determine any mixing issues (entrainment/dispersion, accumulation, adhesion) through visual observations and by pulling samples to assess uniformity. The mixing tests used MCU solvent fabricated at SRNL blended with Risk Reactor DFSB-K43 fluorescent dye. This dyed SRNL MCU solvent had equivalent physical properties important to mixing as compared to the Oak Ridge baseline solvent, ...
Date: February 1, 2006
Creator: Hansen, E.
Partner: UNT Libraries Government Documents Department


Description: The objective of this task is to characterize and report specified physical properties and pH of simulant high level waste (HLW) melter feeds (MF) processed through the scaled melters at Vitreous State Laboratories (VSL). The HLW MF simulants characterized are VSL AZ102 straight hydroxide melter feed, VSL AZ102 straight hydroxide rheology adjusted melter feed, VSL AY102/C106 straight hydroxide melter feed, VSL AY102/C106 straight hydroxide rheology adjusted melter feed, and Savannah River National Laboratory (SRNL) AY102/C106 precipitated hydroxide processed sludge blended with glass former chemicals at VSL to make melter feed. The physical properties and pH were characterized using the methods stated in the Waste Treatment Plant (WTP) characterization procedure (Ref. 7).
Date: March 31, 2005
Creator: Hansen, E
Partner: UNT Libraries Government Documents Department

Purgatorio calculations of Zbar at melt

Description: Purgatorio calculates self-consistent bound and continuum electron densities {rho}{sub bound}(r) and {rho}{sub continuum}(r) in a neutral ion sphere with radius R{sub ion} by populating relativistic wave functions P(r) and Q(r) according to their statistical weights and the Fermi distribution function f({var_epsilon},{mu}) = (1+e{sup {var_epsilon}-{mu}/{tau}}){sup -1}.
Date: August 31, 2007
Creator: Hansen, S B
Partner: UNT Libraries Government Documents Department


Description: Research focused on detailed studies of the complex combustion chemistry of oxygenated, bio-derived fuels. In particular, studies were done of the flame chemistry of simple methyl and ethyl esters chosen as surrogates for the long-chain esters that are primary constituents of biodiesel fuels. The principal goals of these studies were: (1) show how fuel-specific structural differences including degree of unsaturation, linear vs. branched chain structures, and methoxy vs. ethoxy functions affect fueldestruction pathways, (2) understand the chemistry leading to potential increases in the emissions of hazardous air pollutants including aldehydes and ketones inherent in the use of biodiesel fuels, and (3) define the key chemical reaction mechanisms responsible for observed reductions in polycyclic aromatic hydrocarbons and particulate matter when oxygenated fuels are used as replacements for conventional fuels.
Date: February 12, 2013
Creator: Hansen, Nils
Partner: UNT Libraries Government Documents Department

Conceptual Design - Polar Drive Ignition Campaign

Description: The Laboratory for Laser Energetics (LLE) at the University of Rochester is proposing a collaborative effort with Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratories (LANL), the Naval Research Laboratory (NRL), and General Atomics (GA) with the goal of developing a cryogenic polar drive (PD) ignition platform on the National Ignition Facility (NIF). The scope of this proposed project requires close discourse among theorists, experimentalists, and laser and system engineers. This document describes how this proposed project can be broken into a series of parallel independent activities that, if implemented, could deliver this goal in the 2017 timeframe. This Conceptual Design document is arranged into two sections: mission need and design requirements. Design requirements are divided into four subsystems: (1) A point design that details the necessary target specifications and laser pulse requirements; (2) The beam smoothing subsystem that describes the MultiFM 1D smoothing by spectral dispersion (SSD); (3) New optical elements that include continuous phase plates (CPP's) and distributed polarization rotators (DPR's); and (4) The cryogenic target handling and insertion subsystem, which includes the design, fabrication, testing, and deployment of a dedicated PD ignition target insertion cryostat (PD-ITIC). This document includes appendices covering: the primary criteria and functional requirements, the system design requirements, the work breakdown structure, the target point design, the experimental implementation plan, the theoretical unknowns and technical implementation risks, the estimated cost and schedule, the development plan for the DPR's, the development plan for MultiFM 1D SSD, and a list of acronym definitions. While work on the facility modifications required for PD ignition has been in progress for some time, some of the technical details required to define the specific modifications for a Conceptual Design Review (CDR) remain to be defined. In all cases, the facility modifications represent functional changes to existing systems or capabilities. ...
Date: April 5, 2012
Creator: Hansen, R
Partner: UNT Libraries Government Documents Department

Combined plate motion and density driven flow in the asthenosphere beneath Saudi Arabia: Evidence from shear-wave splitting and seismic anisotropy

Description: A comprehensive study of mantle anisotropy along the Red Sea and across Saudi Arabia was performed by analyzing shear-wave splitting recorded by stations from three different seismic networks: the largest, most widely distributed array of stations examined across Saudi Arabia to date. Stations near the Gulf of Aqaba display fast orientations that are aligned parallel to the Dead Sea Transform Fault, most likely related to the strike-slip motion between Africa and Arabia. However, most of our observations across Saudi Arabia are statistically the same, showing a consistent pattern of north-south oriented fast directions with delay times averaging about 1.4 s. Fossilized anisotropy related to the Proterozoic assembly of the Arabian Shield may contribute to the pattern but is not sufficient to fully explain the observations. We feel that the uniform anisotropic signature across Saudi Arabia is best explained by a combination of plate and density driven flow in the asthenosphere. By combining the northeast oriented flow associated with absolute plate motion with the northwest oriented flow associated with the channelized Afar plume along the Red Sea, we obtain a north-south oriented resultant that matches our splitting observations and supports models of active rifting processes. This explains why the north-south orientation of the fast polarization direction is so pervasive across the vast Arabian Plate.
Date: February 8, 2006
Creator: Hansen, S & Schwartz, S
Partner: UNT Libraries Government Documents Department


Description: The overall objective of the EM-31 Rheological Modifiers and Wetting Agents program is to utilize commercially available rheology modifiers to increase the solids fraction of radioactive sludge based waste streams, resulting in an increase in throughput and decreasing the overall processing time. The program first investigates the impact of rheology modifiers on slurry simulants and then utilizes the most effective rheology modifiers on radioactive slurries. The work presented in this document covers the initial investigation of rheology modifier testing with simulants. This task is supported by both the Savannah River National Laboratory (SRNL) and Pacific Northwest National Laboratory (PNNL). The SRNL EM-31 task, for this year, was to investigate the use of rheology modifiers on simulant Defense Waste Processing Facility (DWPF) melter feeds. The task is to determine, based on the impact of the rheology modifier, if there are rheology modifiers that could reduce the water content of the slurry going to the DWPF melter, hence increasing the melt rate by decreasing the water loading. The rheology modifier in essence would allow a higher solids content slurry to have the same type of rheology or pumpability of a lower solids slurry. The modifiers selected in this report were determined based on previous modifiers used in high level waste melter feed simulants, on-going testing performed by counterparts at PNNL, and experiences gain through use of modifiers in other Department of Energy (DOE) processes such as grout processing. There were 12 rheology modifiers selected for testing, covering both organic and inorganic types and they were tested at four different concentrations for a given melter feed. Five different DWPF melter feeds were available and there was adequate material in one of the melter feeds to increase the solids concentration, resulting in a total of six simulants for testing. The mass of melter feed ...
Date: December 8, 2009
Creator: Hansen, E.
Partner: UNT Libraries Government Documents Department

Social Media on Schedule

Description: Presentation for the 2013 Digital Frontiers Annual Conference. In this presentation, the author discusses scheduled social media updates at the Texas Archive of the Moving Image.
Date: September 20, 2013
Creator: Hansen, Elizabeth
Partner: UNT Digital Scholarship Cooperative (DiSCo)

Frame work on an on-line regulations expert permit server, Semi-annual technical progress report, September 25, 1996--March 24, 1997

Description: The Interstate Oil and Gas Compact Commission and its member states have become increasingly concerned about environmental compliance costs for the petroleum exploration and production industry with estimated costs for 1990 at about $2 billion. Over the last decade, these costs have increased at a rate of 3 to 5% per year. At a time when regulatory and environmental needs and costs are increasing, major oil companies are restructuring and reducing staffs. The places an increased burden on the remaining personnel charged with regulatory compliance duties. As major oil producers have begun to concentrate on their more profitable overseas properties, they have created a greater role for the approximately 8000 independent oil and gas producers in the U.S. with many being small independent producers with limited staff. With small staffs, the independents lack the infrastructure to address an increasingly important aspect of production operations: compliance with environmental regulations. Depending on the level of industry activity, the oil and gas industry could incur an additional $16 to $24 billion in increased environmental compliance expenditures by the end of the 1990`s. At current oil prices, the abandonment of remaining resources in known oil reservoirs could be accelerated by approximately ten years, and up to 30% of currently producing resources could be immediately abandoned because of increased regulations. Transferring new and innovative technologies to the industry can help defer reservoir abandonments, improve regulatory compliance, lower the costs of compliance, reduce risk, and help assure the development of new domestic resources.
Date: March 24, 1997
Creator: Hansen, C.
Partner: UNT Libraries Government Documents Department

Framework on an On-Line Regulations Expert Permit Server

Description: This is a cooperative project between the Oil and Gas Compact Commission (OIGCC) and the oil and gas industry to use computerized communication technology as a means of providing information from state agencies. A major effort is the development of a framework for an on-line regulatory compliance and permit server system. Other aspects included provide feedback to state regulatory agencies with recommendations suggesting where procedures or regulations could be simplified or streamlined, identifying overlapping regulations, and surveying the needs of the IOGCC states in the area of emerging issues where sharing of regulatory procedures among the states might be useful.
Date: December 31, 1997
Creator: Hansen, Christine
Partner: UNT Libraries Government Documents Department

Environmental Compliance for Oil and Gas Exploration and Production

Description: The Appalachian/Illinois Basin Directors is a group devoted to increasing communication among the state oil and gas regulatory agencies within the Appalachian and Illinois Basin producing region. The group is comprised of representatives from the oil and gas regulatory agencies from states in the basin (Attachment A). The directors met to discuss regulatory issues common to the area, organize workshops and seminars to meet the training needs of agencies dealing with the uniqueness of their producing region and perform other business pertinent to this area of oil and gas producing states. The emphasis of the coordinated work was a wide range of topics related to environmental compliance for natural gas and oil exploration and production.
Date: October 26, 1999
Creator: Hansen, Christine
Partner: UNT Libraries Government Documents Department

Laboratory directed research and development program FY 2003

Description: The Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab or LBNL) is a multi-program national research facility operated by the University of California for the Department of Energy (DOE). As an integral element of DOE's National Laboratory System, Berkeley Lab supports DOE's missions in fundamental science, energy resources, and environmental quality. Berkeley Lab programs advance four distinct goals for DOE and the nation: (1) To perform leading multidisciplinary research in the computing sciences, physical sciences, energy sciences, biosciences, and general sciences in a manner that ensures employee and public safety and protection of the environment. (2) To develop and operate unique national experimental facilities for qualified investigators. (3) To educate and train future generations of scientists and engineers to promote national science and education goals. (4) To transfer knowledge and technological innovations and to foster productive relationships among Berkeley Lab's research programs, universities, and industry in order to promote national economic competitiveness. In FY03, Berkeley Lab was authorized by DOE to establish a funding ceiling for the LDRD program of $15.0 M, which equates to about 3.2% of Berkeley Lab's FY03 projected operating and capital equipment budgets. This funding level was provided to develop new scientific ideas and opportunities and allow the Berkeley Lab Director an opportunity to initiate new directions. Budget constraints limited available resources, however, so only $10.1 M was expended for operating and $0.6 M for capital equipment (2.4% of actual Berkeley Lab FY03 costs). In FY03, scientists submitted 168 proposals, requesting over $24.2 M in operating funding. Eighty-two projects were funded, with awards ranging from $45 K to $500 K. These projects are summarized in Table 1.
Date: March 27, 2004
Creator: Hansen, Todd
Partner: UNT Libraries Government Documents Department

Physical Characterization of Florida International University Simulants

Description: Florida International University shipped Laponite, clay (bentonite and kaolin blend), and Quality Assurance Requirements Document AZ-101 simulants to the Savannah River Technology Center for physical characterization and to report the results. The objectives of the task were to measure the physical properties of the fluids provided by FIU and to report the results. The physical properties were measured using the approved River Protection Project Waste Treatment Plant characterization procedure [Ref. 1]. This task was conducted in response to the work outlined in CCN066794 [Ref. 2], authored by Gary Smith and William Graves of RPP-WTP.
Date: August 19, 2004
Partner: UNT Libraries Government Documents Department

Physical Properties of Kaolin/Sand Slurry Used During Submersible Mixer Pump Tests at TNX

Description: The purpose of this task is to characterize the physical properties of kaolin/sand slurry used to test the performance of a new submersible mixer pump which is undergoing performance testing at the TNT Waste Tank mockup facility. Three different sample locations, the SMP cooling water exit, the SMP fluid flow field, and SMP effective cleaning radius were used for sampling over the seven day test. The physical properties determinations for the kaolin/sand slurry samples include rheology, weight percent total solids (wt TS), density, and particle size distribution were requested, though not all these determinations were performed on all the samples. The physical properties determinations are described in more detail in section 1.0. Measurements were performed at Savannah River National Laboratory in accordance with the Technical Assistance Request (TAR)1. The data, average of two measurements, is shown in the table below. This data clearly shows that the SMP-CWE samples contained more so lids than those at other sample locations for a given sample day. The SMP-FFF and SMP-ECR were similar in solids content. The rheology of the samples is dependent on the wt solids concentration and are all within the bounds stated in the TAR.
Date: August 18, 2004
Partner: UNT Libraries Government Documents Department

Rheological and Physical Properties of Hanford Radioactive LAW AZ-102 Pretreated Waste and Melter Feed

Description: The purpose and objective of this task was to measure and report the physical and rheological properties, pH, and PSD of a radioactive Hanford tank sample, 241-AZ-102 pretreated by the reference RPP-WTP pretreatment process at SRTC. The LAW pretreated wastes and melter feeds were characterized at two different sodium molarities in accordance with RPP-WTP R and T guidelines for characterization. The initial AZ-102 pretreated waste was received at a concentration of 4.38M Na. This pretreated waste was then diluted to two different sodium molarities of 1.0M Na and 1.3M Na. After the 1.0M Na and 1.3M Na pretreated wastes were characterized, these waste streams were blended with the project approved GFCs to make melter feeds. The physical and rheological properties and pH of the resulting melter feeds were measured using the methods outlined in the RPP-WTP guidelines, unless otherwise stated in this document.
Date: April 30, 2004
Partner: UNT Libraries Government Documents Department


Description: The Defense Waste Processing Facility (DPWF) presently is in the process to determine means to reduce water utilization in the Slurry Mix Evaporator (SME) process, thus reducing effluent and processing times. The frit slurry addition system mixes the dry frit with water, yielding approximately a 50 weight percent slurry containing frit and the other fraction water. This slurry is discharged into the SME and excess water is removed via boiling. To reduce this water load to the SME, DWPF has proposed using a pneumatic system in conveying the frit to the SME, in essence a dry delivery system. The problem associated with utilizing a dry delivery system with the existing frit is the generation of dust when discharged into the SME. The use of water has been shown to be effective in the mining industry as well in the DOE complex to mitigate dusting. The method employed by SRNL to determine the quantity of water to mitigate dusting in dry powders was effective, between a lab and bench scale tests. In those tests, it was shown that as high as five weight percent (wt%) of water addition was required to mitigate dust from batches of glass forming minerals used by the Waste Treatment Plant at Hanford, Washington. The same method used to determine the quantity of water to mitigate dusting was used in this task to determine the quantity of water to mitigate this dusting using as-received frit. The ability for water to mitigate dusting is due to its adhesive properties as shown in Figure 1-1. Wetting the frit particles allows for the smaller frit particles (including dust) to adhere to the larger frit particles or to agglomerate into large particles. Fluids other than water can also be used, but their adhesive properties are different than water and the quantity ...
Date: July 21, 2010
Creator: Hansen, E.
Partner: UNT Libraries Government Documents Department

Nucleus-nucleus collisions at very high energies

Description: The present report covers the material of two lectures. The first part, contains a collection of useful formulae from relativistic kinematics and deals with invariant cross sections and multiplicities. The remainder of the paper is on strangeness production in relativistic heavy ion collisions. Some elementary rules for particle production in nucleon-nucleon interactions are presented. This paper also contains arguments on why one expects enhanced strange particle production from the quark-gluon plasma. Next is presented some selected data on strangeness production in Si + Au and other interactions at 14.6 GeV/c per nucleon and from S + S at 200 GeV/c per nucleon. Some conclusions drawn from the experimental results are presented. 10 refs.
Date: January 1, 1990
Creator: Hansen, O.
Partner: UNT Libraries Government Documents Department

Relativistic heavy ion physics

Description: In the fall of 1986, beams of heavy ions up to A = 40 at total energies up to E = 225 GeV/nucleon will become available for experiments at CERN (60 and 225 GeV/nucleon) and at Brookhaven (15.5 GeV/nucleon). Future experiments to look for quark confinement are discussed. 9 refs., 3 figs. (GHT)
Date: January 1, 1985
Creator: Hansen, O.
Partner: UNT Libraries Government Documents Department