5 Matching Results

Search Results

The Effect of pH on Nickel Alloy SCC and Corrosion Performance

Description: Alloy X-750 condition HTH stress corrosion crack growth rate (SCCGR) tests have been conducted at 360 C (680 F) with 50 cc/kg hydrogen as a function of coolant pH. Results indicate no appreciable influence of pH on crack growth in the pH (at 360 C) range of {approx} 6.2 to 8.7, consistent with previous alloy 600 findings. These intermediate pH results suggest that pH is not a key variable which must be accounted for when modeling pressurized water reactor (PWR) primary water SCC. In this study, however, a nearly three fold reduction in X-750 crack growth rate was observed in reduced pH environments (pH 3.8 through HCl addition and pH 4-5.3 through H{sub 2}SO{sub 4} addition). Crack growth rates did not directly correlate with corrosion film thickness. In fact, 10x thicker corrosion films were observed in the reduced pH environments.
Date: October 10, 2002
Creator: Morton, D.S. & Hansen, M.
Partner: UNT Libraries Government Documents Department

Pressure as a probe of the glassy state of ferroelectrics with random site disorder

Description: Results on lanthanum-modified lead zirconate-titanates (PLZTs) have revealed a pressure-induced crossover from a normal ferroelectric to a relaxor state and the continuous evolution of the dynamics and energetics of the relaxation process. This crossover appears to be a general feature of soft mode ferroelectrics with random site dipolar impurities or polar nanodomains and results from a large decrease in the correlation radius among polar nanodomains -- a unique property of soft mode ferroelectrics.
Date: March 10, 1998
Creator: Samara, G.A. & Hansen, L.V.
Partner: UNT Libraries Government Documents Department

Plate Fin Heat Exchanger Model with Axial Conduction and Variable Properties

Description: Future superconducting radio frequency (SRF) cavities, as part of Project X at Fermilab, will be cooled to superfluid helium temperatures by a cryogenic distribution system supplying cold supercritical helium. To reduce vapor fraction during the final Joule-Thomson (J-T) expansion into the superfluid helium cooling bath, counter-flow, plate-fin heat exchangers will be utilized. Due to their compact size and ease of fabrication, plate-fin heat exchangers are an effective option. However, the design of compact and high-effectiveness cryogenic heat exchangers operating at liquid helium temperatures requires consideration of axial heat conduction along the direction of flow, in addition to variable fluid properties. Here we present a numerical model that includes the effects of axial conduction and variable properties for a plate fin heat exchanger. The model is used to guide design decisions on heat exchanger material choice and geometry. In addition, the J-T expansion process is modeled with the heat exchanger to analyze the effect of heat load and cryogenic supply parameters. A numerical model that includes the effects of axial conduction and variable properties for a plate fin heat exchanger was developed and the effect of various design parameters on overall heat exchanger size was investigated. It was found that highly conductive metals should be avoided in the design of compact JT heat exchangers. For the geometry considered, the optimal conductivity is around 3.5 W/m-K and can range from 0.3-10 W/m-K without a large loss in performance. The model was implemented with an isenthalpic expansion process. Increasing the cold side inlet temperature from 2K to 2.2 K decreased the liquid fraction from 0.856 to 0.839 which corresponds to a 0.12 g/s increase in supercritical helium supply needed to maintain liquid level in the cooling bath. Lastly, it was found that the effectiveness increased when the heat load was below the design ...
Date: June 10, 2011
Creator: Hansen, B.J.; White, M.J.; Klebaner, A. & /Fermilab
Partner: UNT Libraries Government Documents Department

Evaluation study of building-resolved urban dispersion models

Description: For effective emergency response and recovery planning, it is critically important that building-resolved urban dispersion models be evaluated using field data. Several full-physics computational fluid dynamics (CFD) models and semi-empirical building-resolved (SEB) models are being advanced and applied to simulating flow and dispersion in urban areas. To obtain an estimate of the current state-of-readiness of these classes of models, the Department of Homeland Security (DHS) funded a study to compare five CFD models and one SEB model with tracer data from the extensive Midtown Manhattan field study (MID05) conducted during August 2005 as part of the DHS Urban Dispersion Program (UDP; Allwine and Flaherty 2007). Six days of tracer and meteorological experiments were conducted over an approximately 2-km-by-2-km area in Midtown Manhattan just south of Central Park in New York City. A subset of these data was used for model evaluations. The study was conducted such that an evaluation team, independent of the six modeling teams, provided all the input data (e.g., building data, meteorological data and tracer release rates) and run conditions for each of four experimental periods simulated. Tracer concentration data for two of the four experimental periods were provided to the modeling teams for their own evaluation of their respective models to ensure proper setup and operation. Tracer data were not provided for the second two experimental periods to provide for an independent evaluation of the models. The tracer concentrations resulting from the model simulations were provided to the evaluation team in a standard format for consistency in inter-comparing model results. An overview of the model evaluation approach will be given followed by a discussion on the qualitative comparison of the respective models with the field data. Future model developments efforts needed to address modeling gaps identified from this study will also be discussed.
Date: September 10, 2007
Creator: Flaherty, Julia E.; Allwine, K Jerry; Brown, Mike J.; Coirier, WIlliam J.; Ericson, Shawn C.; Hansen, Olav R. et al.
Partner: UNT Libraries Government Documents Department