4,483 Matching Results

Search Results

Kinetic Effects on the Stability Properties of Field-reversed Configurations: I. Linear Stability

Description: New computational results are presented which advance the understanding of the stability properties of the Field-Reversed Configuration (FRC). We present results of hybrid and two-fluid (Hall-MHD) simulations of prolate FRCs. The n = 1 tilt instability mechanism and growth rate reduction mechanisms are investigated in detail including resonant particle effects, finite Larmor radius and Hall stabilization, and profile effects. It is shown that the Hall effect determines the mode rotation and the change in the linear mode structure in the kinetic regime; however, the reduction in the growth rate is mostly due to finite Larmor radius effects. Resonant wave-particle interactions are studied as a function of (a) elongation, (b) the kinetic parameter S*, which is proportional to the ratio of the separatrix radius to the thermal ion Larmor radius, and (c) the separatrix shape. It is demonstrated that, contrary to the usually assumed stochasticity of the ion orbits in the FRC, a large fraction of the orbits are regular in long configurations when S* is small. A stochasticity condition is found, and a scaling with the S* parameter is presented. Resonant particle effects are shown to maintain the instability in the large gyroradius regime regardless of the separatrix shape.
Date: January 28, 2003
Creator: Belova, Elena V.; Davidson, Ronald C.; Ji, Hantao & Yamada, Masaaki
Partner: UNT Libraries Government Documents Department

Phased Startup Initiative Phases 3 and 4 Test Plan and Test Specification (OCRWM)

Description: Construction for the Spent Nuclear Fuel (SNF) Project facilities is continuing per the Level III Baseline Schedule, and installation of the Fuel Retrieval System (FRS) and Integrated Water Treatment System (IWTS) in K West Basin is now complete. In order to accelerate the project, a phased start up strategy to initiate testing of the FRS and IWTS early in the overall project schedule was proposed (Williams 1999). Wilkinson (1999) expands the definition of the original proposal into four functional testing phases of the Phased Startup Initiative (PSI). Phases 1 and 2 are based on performing functional tests using dummy fuel. These tests are described in separate planning documents. This test plan provides overall guidance for Phase 3 and 4 tests, which are performed using actual irradiated N fuel assemblies. The overall objective of the Phase 3 and 4 testing is to verify how the FRS and IWTS respond while processing actual fuel. Conducting these tests early in the project schedule will allow identification and resolution of equipment and process problems before they become activities on the start-up critical path. The specific objectives of this test plan are to: (1) Define the test scope for the FRS and IWTS; (2) Provide detailed test requirements that can be used to write the specific test procedures; (3) Define data required and measurements to be taken. Where existing methods to obtain these do not exist, enough detail will be provided to define required additional equipment; and (4) Define specific test objectives and acceptance criteria.
Date: February 28, 2000
Creator: PITNER, A.L.
Partner: UNT Libraries Government Documents Department


Description: This is the seventh Quarterly Technical Report for DOE Cooperative Agreement No.: DE-FC26-00NT41047. The goal of the project is to develop and demonstrate a computational workbench for simulating the performance of Vision 21 Power Plant Systems. Within the last quarter, good progress has been made on the development of the IGCC workbench. A series of parametric CFD simulations for single stage and two stage generic gasifier configurations have been performed. An advanced flowing slag model has been implemented into the CFD based gasifier model. A literature review has been performed on published gasification kinetics. Reactor models have been developed and implemented into the workbench for the majority of the heat exchangers, gas clean up system and power generation system for the Vision 21 reference configuration. Modifications to the software infrastructure of the workbench have been commenced to allow interfacing to the workbench reactor models that utilize the CAPE{_}Open software interface protocol.
Date: July 28, 2002
Creator: Bockelie, Mike; Swensen, Dave; Denison, Martin; Senior, Connie; Sarofim, Adel & Risio, Bene
Partner: UNT Libraries Government Documents Department

Comparison Evaluation of the PFP FSAR and NRC Regulatory Guide 3.39 with DOE-STD-3009-94

Description: One of the Plutonium Finishing Plant's (PFP) current Authorization Basis (AB) documents is the Final Safety Analysis Report (FSAR). This FSAR (HNF-SD-CP-SAR-02 1) was prepared to the format and content guidance specified in U.S. Nuclear Regulatory Commission (NRC) Regulatory Guide 3.39, Standard Format and Content of License Applications for Plutonium Processing and Fuel Fabrication Plants (RG 3.39). In April 1992, the US Department of Energy (DOE) issued DOE Order 5480.23 which established the FSAR requirements for DOE nonreactor nuclear facilities. In 1994, DOE issued DOE-STD-3009-94, Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports, which is a format and content guide addressing the preparation of FSARs in accordance with DOE Order 5480.23. During the initial preparation and issuance of the PFP FSAR the format and content guidance contained in NRC Regulatory Guide 3.39 was utilized, since it was the most applicable guidance at the time for the preparation of Safety Analysis Reports for plutonium processing plants. With the adoption of DOE Order 5480.23 and DOE-STD-3009-94, DOE required the preparation of SARs to meet the format and content of those DOE documents. The PFP was granted an exemption to continue with RG 3.39 format for future FSAR revisions. PFP modifications and additions have required PFP FSAR modifications that have typically been prepared to the same NRC Regulatory Guide 3.39 format and content, to provide consistency with the PFP FSAR. This document provides a table comparison between the 3009 and RG 3.39 formats to validate the extent of PFP FSAR compliance with the intent of DOE Order 5480.23 and DOE-STD-3009-94. This evaluation was initially performed on Revisions 1 and 1A of the PFP FSAR. With the preparation of a Revision 2 draft to the FSAR, sections with significant changes were reevaluated for compliance and the tables were updated, ...
Date: July 28, 2000
Creator: OSCARSON, E.E.
Partner: UNT Libraries Government Documents Department

Operational Test Report (OTR) for U-103 Pumping and Instrumentation and Control (PIC) Skid

Description: Attached is the completed Operation Test Procedure (OTP-200-004, Rev. A-16). OTP includes a print out of the Programmable Logic Controller (PLC) Ladder Diagram. Ladder Diagram was designed for installation in the PLC used to monitor and control pumping activity for Tank Farm 241-U-103. The completed OTP and OTR are referenced in the 25 PIC Skid Configuration Drawing (H-2-829998).
Date: February 28, 2000
Creator: Koch, M. R.
Partner: UNT Libraries Government Documents Department

United States Historical Climatology Network Daily Temperature and Precipitation Data (1871-1997)

Description: This document describes a database containing daily observations of maximum and minimum temperature, precipitation amount, snowfall amount, and snow depth from 1062 observing stations across the contiguous US. This database is an expansion and update of the original 138-station database previously released by the Carbon Dioxide Information Analysis Center (CDIAC) as CDIAC numeric data package NDP-042. These 1062 stations are a subset of the 1221-station US Historical Climatology Network (HCN), a monthly database compiled by the National Climatic Data Center (Asheville, North Carolina) that has been widely used in analyzing US climate. Data from 1050 of these daily records extend into the 1990s, while 990 of these extend through 1997. Most station records are essentially complete for at least 40 years; the latest beginning year of record is 1948. Records from 158 stations begin prior to 1900, with that of Charleston, South Carolina beginning the earliest (1871). The daily resolution of these data makes them extremely valuable for studies attempting to detect and monitor long-term climatic changes on a regional scale. Studies using daily data may be able to detect changes in regional climate that would not be apparent from analysis of monthly temperature and precipitation data. Such studies may include analyses of trends in maximum and minimum temperatures, temperature extremes, daily temperature range, precipitation ''event size'' frequency, and the magnitude and duration of wet and dry periods. The data are also valuable in areas such as regional climate model validation and climate change impact assessment. This database is available free of charge from CDIAC as a numeric data package (NDP).
Date: October 28, 2002
Creator: Easterling, D.R.
Partner: UNT Libraries Government Documents Department

Monte Carlo Modeling of High-Energy Film Radiography

Description: High-energy film radiography methods, adapted in the past to performing specific tasks, must now meet increasing demands to identify defects and perform critical measurements in a wide variety of manufacturing processes. Although film provides unequaled resolution for most components and assemblies, image quality must be enhanced with much more detailed information to identify problems and qualify features of interest inside manufactured items. The work described is concerned with improving current 9 MeV nondestructive practice by optimizing the important parameters involved in film radiography using computational methods. In order to follow important scattering effects produced by electrons, the Monte Carlo N-Particle (MCNP) transport code was used with advanced, highly parallel computer systems. The work has provided a more detailed understanding of latent image formation at high X-ray energies, and suggests that improvements can be made in our ability to identify defects and to obtain much more detail in images of fine features.
Date: March 28, 2003
Creator: Miller, A. C., Jr.; Cochran, J.L. & Lamberti, V.E.
Partner: UNT Libraries Government Documents Department

DIE Deflection Modeling: Empirical Validation and Tech Transfer

Description: This report summarizes computer modeling work that was designed to help understand how the die casting die and machine contribute to parting plane separation during operation. Techniques developed in earlier research (8) were applied to complete a large computational experiment that systematically explored the relationship between the stiffness of the machine platens and key dimensional and structural variables (platen area covered, die thickness, platen thickness, thickness of insert and the location of the die with respect to the platen) describing the die/machine system. The results consistently show that there are many significant interactions among the variables and it is the interactions, more than the individual variables themselves, which determine the performance of the machine/die system. That said, the results consistently show that it is the stiffness of the machine platens that has the largest single impact on die separation.
Date: May 28, 2003
Creator: Miller, R. Allen
Partner: UNT Libraries Government Documents Department

Software quality assurance documentation for the release of NUFT 2.0 for HP platforms

Description: This document is the Individual Software Plan (ISP) for version 2.0 of the Non-isothermal Unsaturated-saturated Flow and Transport (NUFT.) analysis computer program. This document addresses the applicable requirements of LLNL YMP procedure 033-YMP-QP 3.2, Section The purpose of this ISP is to plan and organize the activities required to certify the NUFT code for quality affecting work involving problems that include cross drift analysis of the Yucca Mountain Repository facility. NUFT is software for application to the solution of a class of coupled mass and heat transport problems in porous geologic media including Yucca Mountain Repository Cross Drift Problem (YMRCDP- also known as the Enhanced Characterization of the Repository Block (ECRB)). Solution of this class of problems requires a suite of multiphase, multi-component models for numerical solution of non- isothermal flow and transport in porous media with applications to subsurface contaminant transport problems. NUFT is a suite of multiphase, multi-component models for numerical solution of non- isothermal flow and transport in porous media, with application to subsurface contaminant transport problems, and in particular, to the hydrology in and about the Yucca Mountain Repository Site. NUFI� is acquired software, as defined by 033-YMP-QP 3.2, and a preliminary baseline of source code, electronic documentation, and paper documentation has been established as required by 033-YMP-QP 3.2, Section 4.1. NUFT runs on Sun Unix platforms, Solaris operating system version 5.5 and HP-UX with operating system version 10.20. The product to be qualified under this ISP is the version running on HP- UX. The HP version will be labeled Version 2.0h. The �h� is included to distinguish the HP version from possible future versions qualified for Sun or other platforms. The scope of the plans and procedures outlined in this ISP is limited to the effort required to qualify NUFT for the class of ...
Date: August 28, 1998
Creator: Fernandez, M W; G, G; Johnson, G L & Preckshot
Partner: UNT Libraries Government Documents Department

Preoperational Environmental Survey for the Spent Nuclear Fuel (SNF) Project Facilities

Description: This document represents the report for environmental sampling of soil, vegetation, litter, cryptograms, and small mammals at the Spent Nuclear Fuel Project facilities located in 100 K and 200 East Areas in support of the preoperational environmental survey.
Date: September 28, 2000
Creator: Mitchell, R. M.
Partner: UNT Libraries Government Documents Department

Status of the Experimental Physics and Industrial Control System at NSTX

Description: The NSTX achieved first plasma in 1999. The Experimental Physics and Industrial Control System (EPICS) is used to provide data-integration services for monitoring and control of all NSTX engineering subsystems. EPICS is a set of software initially developed at U.S. DOE laboratories. It is currently used and maintained through a global collaboration of hundreds of scientists and engineers. This paper will relate some of our experiences using and supporting the EPICS software. Topics include reliability and maintainability, lessons learned, recently added engineering subsystems, new EPICS software tools, and a review of our first EPICS software upgrade. Steps to modernize the technical infrastructure of EPICS to ensure effective support for NSTX will also be described.
Date: January 28, 2002
Creator: Sichta, P. & Dong, J.
Partner: UNT Libraries Government Documents Department

Project Development Specification for Valve Pit Manifold

Description: Establishes the performance, design development, and test requirements for the valve pit manifolds. The system engineering approach was used to develop this document in accordance with the guidelines laid out in the Systems Engineering Management Plan for Project W-314.
Date: September 28, 2000
Creator: MCGREW, D.L.
Partner: UNT Libraries Government Documents Department

The Use of Radar Methods to Determine Moisture Content in the Vadose Zone

Description: Water content is a critical parameter affecting both liquid-phase and vapor-phase contaminant transport in the vadose zone. This means that accurate estimates of in situ water content must be obtained in order to design for the appropriate handling or remediation of a contaminated region of the vadose zone. Traditional methods of sampling the subsurface by drilling and/or direct sampling are very time consuming, limited in terms of spatial coverage, and have the associated risk of contacting and increasing the size of the contaminated area. One solution is to use geophysical methods which can provide a high-resolution, non-invasive means of sampling or imaging the subsurface. The overall objective of our research, defined at the start of this project, was to advance the usefulness of radar methods (ground-based and borehole) as a means of characterizing water content in the vadose zone. We have met this objective by providing research results that can be used to (1) improve the accuracy of water content estimates from radar measurements; (2) provide estimates of the potential error in water content estimates from radar measurements; (3) improve the clarity of radar images; (4) develop large-scale models of the subsurface ''architecture'' using radar images; (5) develop ways of quantifying the spatial heterogeneity of the subsurface through analysis of radar images. We have also been able to identify the critical areas where more research is needed in order to be able to use radar methods most effectively as an accurate means of subsurface characterization.
Date: December 28, 2003
Creator: Knight, Rosemary
Partner: UNT Libraries Government Documents Department

The First Decommissioning of a Fusion Reactor Fueled by Deuterium-Tritium

Description: The Tokamak Fusion Test Reactor (TFTR) at the Plasma Physics Laboratory of Princeton University (PPPL) was the first fusion reactor fueled by a mixture of deuterium and tritium (D-T) to be decommissioned in the world. The decommissioning was performed over a period of three years and was completed safely, on schedule, and under budget. Provided is an overview of the project and detail of various factors which led to the success of the project. Discussion will cover management of the project, engineering planning before the project started and during the field work as it was being performed, training of workers in the field, the novel adaptation of tools from other industry, and the development of an innovative process for the use of diamond wire to segment the activated/contaminated vacuum vessel. The success of the TFTR decommissioning provides a viable model for the decommissioning of D-T burning fusion devices in the future.
Date: October 28, 2003
Creator: Gentile, Charles A.; Perry, Erik; Rule, Keith; Williams, Michael; Parsells, Robert; Viola, Michael et al.
Partner: UNT Libraries Government Documents Department

Saltwell Leak Detector Station Programmable Logic Controller (PLC) Software Configuration Management Plan (SCMP)

Description: This document provides the procedures and guidelines necessary for computer software configuration management activities during the operation and maintenance phases of the Saltwell Leak Detector Stations as required by HNF-PRO-309, Rev. 1, Computer Software Quality Assurance, Section 2.4, Software Configuration Management. The software configuration management plan (SCMP) integrates technical and administrative controls to establish and maintain technical consistency among requirements, physical configuration, and documentation for the Saltwell Leak Detector Station Programmable Logic Controller (PLC) software during the Hanford application, operations and maintenance. This SCMP establishes the Saltwell Leak Detector Station PLC Software Baseline, status changes to that baseline, and ensures that software meets design and operational requirements and is tested in accordance with their design basis.
Date: November 28, 2000
Creator: WHITE, K.A.
Partner: UNT Libraries Government Documents Department

Energy savings for heat-island reduction strategies in Chicago and Houston (including updates for Baton Rouge, Sacramento, and Salt Lake City)

Description: In 1997, the U.S. Environmental Protection Agency (EPA) established the ''Heat Island Reduction Initiative'' to quantify the potential benefits of Heat-Island Reduction (HIR) strategies (i.e., shade trees, reflective roofs, reflective pavements and urban vegetation) to reduce cooling-energy use in buildings, lower the ambient air temperature and improve urban air quality in cities, and reduce CO2 emissions from power plants. Under this initiative, the Urban Heat Island Pilot Project (UHIPP) was created with the objective of investigating the potential of HIR strategies in residential and commercial buildings in three initial UHIPP cities: Baton Rouge, LA; Sacramento, CA; and Salt Lake City, UT. Later two other cities, Chicago, IL and Houston, TX were added to the UHIPP. In an earlier report we summarized our efforts to calculate the annual energy savings, peak power avoidance, and annual CO2 reduction obtainable from the introduction of HIR strategies in the initial three cities. This report summarizes the results of our study for Chicago and Houston. In this analysis, we focused on three building types that offer the highest potential savings: single-family residence, office and retail store. Each building type was characterized in detail by vintage and system type (i.e., old and new building constructions, and gas and electric heat). We used the prototypical building characteristics developed earlier for each building type and simulated the impact of HIR strategies on building cooling- and heating-energy use and peak power demand using the DOE-2.1E model. Our simulations included the impact of (1) strategically-placed shade trees near buildings [direct effect], (2) use of high-albedo roofing material on the building [direct effect], (3) urban reforestation with high-albedo pavements and building surfaces [indirect effect] and (4) combined strategies 1, 2, and 3 [direct and indirect effects]. We then estimated the total roof area of air-conditioned buildings in each city using readily ...
Date: February 28, 2002
Creator: Konopacki, S. & Akbari, H.
Partner: UNT Libraries Government Documents Department

Corrective Action Investigation Plan for Corrective Action Unit 5: Landfills, Nevada Test Site, Nevada (Rev. No.: 0) includes Record of Technical Change No. 1 (dated 9/17/2002)

Description: This Corrective Action Investigation Plan contains the U.S. Department of Energy, National Nuclear Security Administration Nevada Operations Office's approach to collect the data necessary to evaluate corrective action alternatives appropriate for the closure of Corrective Action Unit (CAU) 5 under the Federal Facility Agreement and Consent Order. Corrective Action Unit 5 consists of eight Corrective Action Sites (CASs): 05-15-01, Sanitary Landfill; 05-16-01, Landfill; 06-08-01, Landfill; 06-15-02, Sanitary Landfill; 06-15-03, Sanitary Landfill; 12-15-01, Sanitary Landfill; 20-15-01, Landfill; 23-15-03, Disposal Site. Located between Areas 5, 6, 12, 20, and 23 of the Nevada Test Site (NTS), CAU 5 consists of unlined landfills used in support of disposal operations between 1952 and 1992. Large volumes of solid waste were produced from the projects which used the CAU 5 landfills. Waste disposed in these landfills may be present without appropriate controls (i.e., use restrictions, adequate cover) and hazardous and/or radioactive constituents may be present at concentrations and locations that could potentially pose a threat to human health and/or the environment. During the 1992 to 1995 time frame, the NTS was used for various research and development projects including nuclear weapons testing. Instead of managing solid waste at one or two disposal sites, the practice on the NTS was to dispose of solid waste in the vicinity of the project. A review of historical documentation, process knowledge, personal interviews, and inferred activities associated with this CAU identified the following as potential contaminants of concern: volatile organic compounds, semivolatile organic compounds, polychlorinated biphenyls, pesticides, petroleum hydrocarbons (diesel- and gasoline-range organics), Resource Conservation and Recovery Act Metals, plus nickel and zinc. A two-phase approach has been selected to collect information and generate data to satisfy needed resolution criteria and resolve the decision statements. Phase I will concentrate on geophysical surveys to confirm the presence or absence of ...
Date: May 28, 2002
Creator: IT Corporation, Las Vegas, NV
Partner: UNT Libraries Government Documents Department

Waste Package Design Methodology Report

Description: The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report.
Date: September 28, 2001
Creator: Brownson, D.A.
Partner: UNT Libraries Government Documents Department

LTA Physics Design: Description of All MOX Pin LTA Design

Description: In this document issued according to Work Release 02. P. 99-lb the results of neutronics studies of <<100%Pu>> MOX LTA design are presented. The parametric studies of infinite MOX-UOX grids, MOX-UOX core fragments and of VVER-1000 core with 3 MOX LTAs are performed. The neutronics parameters of MOX fueled core have been performed for the chosen design MOX LTA using the Russian 3D code BIPR-7A and 2D code PERMAK-A with the constants prepared by the cell spectrum code TVS-M.
Date: September 28, 2001
Creator: Pavlovichev, A.M.
Partner: UNT Libraries Government Documents Department

Characterizing the fabric of the urban environment: A case study of Salt Lake City, Utah

Description: Urban fabric data are needed in order to estimate the impact of light-colored surfaces (roofs and pavements) and urban vegetation (trees, grass, shrubs) on the meteorology and air quality of a city, and to design effective implementation programs. In this report, we discuss the result of a semi-automatic Monte-Carlo statistical approach used to develop data on surface-type distribution and city-fabric makeup (percentage of various surface-types) using aerial color orthophotography. The digital aerial photographs for Salt Lake City covered a total of about 34 km2 (13 mi2). At 0.50-m resolution, there were approximately 1.4 x 108 pixels of data. Four major land-use types were examined: (1) commercial, (2) industrial, (3) educational, and (4) residential. On average, for the areas studied, vegetation covers about 46 percent of the area (ranging 44-51 percent), roofs cover about 21 percent (ranging 15-24 percent), and paved surfaces about 26 percent (ranging 21-28 percent). For the most part, trees shade streets, parking lots, grass, and sidewalks. In most non-residential areas, paved surfaces cover 46-66 percent of the area. In residential areas, on average, paved surfaces cover about 32 percent of the area. Land-use/land-cover (LU/LC) data from the United States Geological Survey were used to extrapolate these results from neighborhood scales to metropolitan Salt Lake City. In an area of roughly 560 km2, defining most of metropolitan Salt Lake City, over 60 percent is residential. The total roof area is about 110 km2, and the total paved surface area (roads, parking areas, sidewalks) covers about 170 km2. The total vegetated area covers about 230 km2.
Date: February 28, 2001
Creator: Akbari, Hashem & Rose, L. Shea
Partner: UNT Libraries Government Documents Department

Qualitative Reasoning for Additional Die Casting Applications

Description: If manufacturing incompatibility of a product can be evaluated at the early product design stage, the designers can modify their design to reduce the effect of potential manufacturing problems. This will result in fewer manufacturing problems, less redsign, less expensive tooling, lower cost, better quality, and shorter development time. For a given design, geometric reasoning can predict qualitatively the behaviors of a physical manufacturing process by representing and reasoning with incomplete knowledge of the physical phenomena. It integrates a design with manufacturing processes to help designers simultaneously consider design goals and manufacturing constraints during the early design stage. The geometric reasoning approach can encourage design engineers to qualitatively evaluate the compatibility of their design with manufacturing limitations and requirements.
Date: May 28, 2003
Creator: Miller, R. Allen; Cui, Dehua & Ma, Yuming
Partner: UNT Libraries Government Documents Department