6,729 Matching Results

Search Results

K-Basins S/RIDS

Description: The Standards/Requirements Identification Document (S/RID) is a list of the Environmental, Safety, and Health (ES{ampersand}H) and Safeguards and Security (SAS) standards/requirements applicable to the K Basins facility.
Date: August 1, 1997
Creator: Watson, D.J.
Partner: UNT Libraries Government Documents Department

Sediment studies at Bikini Atoll part 3. Inventories of some long-lived gamma-emitting radionuclides associated with lagoon surface sediments

Description: Surface sediment samples were collected during 1979 from 87 locations in the lagoon at Bikini Atoll. The collections were made to better define the concentrations and distribution of long-lived radionuclides associated with the bottom material and to show what modifications occurred to the composition of the surface sediment from the nuclear testing program conducted by the United States at the Atoll between 1946 and 1958. This is the last of three reports on Bikini sediment studies. In this report, we discuss the concentrations and inventories of the residual long-lived gamma-emitting radionuclides in sediments from the lagoon. The gamma-emitting radionuclides detected most frequently in sediments collected in 1979, in addition to Americium-241 ({sup 241}Am) (discussed in the second report of this series), included Cesium-137 ({sup 137}Cs), Bismuth-207 ({sup 207}Bi), Europium-155 ({sup 155}Eu), and Cobalt-60 ({sup 60}Co). Other man-made, gamma-emitting radionuclides such as Europium-152,154 ({sup 152,154}Eu), Antimony-125 ({sup 125}Sb), and Rhodium-101,102m ({sup 101,102m}Rh) were occasionally measured above detection limits in sediments near test site locations. The mean inventories for {sup 137}Cs, {sup 207}Ei, {sup 155}Eu, and {sup 60}Co in the surface 4 cm of the lagoon sediment to be 1.7, 0.56, 7.76, and 0.74 TBq, respectively. By June 1997, radioactive decay would reduce these values to 1.1, 0.38, 0.62, and 0.07 TBq, respectively. Some additional loss results from a combination of different processes that continuously mobilize and return some amount of the radionuclides to the water column. The water and dissolved constituents are removed from the lagoon through channels and exchange with the surface waters of the north equatorial Pacific Ocean. Highest levels of these radionuclides are found in surface deposits lagoonward of the Bravo Crater. Lowest concentrations and inventories are associated with sediment lagoonward of the eastern reef. The quantities in the 0-4 cm surface layer are estimated to be less ...
Date: December 1, 1997
Creator: Noshkin, V.E.
Partner: UNT Libraries Government Documents Department

Sampling and analysis plan for sludge located in fuel storage canisters of the 105-K West basin

Description: This Sampling and Analysis Plan (SAP) provides direction for the first sampling of sludge from the K West Basin spent fuel canisters. The specially developed sampling equipment removes representative samples of sludge while maintaining the radioactive sample underwater in the basin pool (equipment is described in WHC-SD-SNF-SDD-004). Included are the basic background logic for sample selection, the overall laboratory analyses required and the laboratory reporting required. These are based on requirements put forth in the data quality objectives (WHC-SD-SNF-DQO-012) established for this sampling and characterization activity.
Date: April 30, 1997
Creator: Baker, R.B.
Partner: UNT Libraries Government Documents Department

Annual Technical Progress Report - West Hackberry Tertiary Project

Description: The West Hackberry Tertiary Project is a field test of the concept that air injection can be combined with the Double Displacement Process to produce a tertiary recovery process that is both low cost and economic at current oil prices. The Double Displacement Process is the gas displacement of a water invaded oil column for the purpose of recovering tertiary oil by gravity drainage. In reservoirs with pronounced bed dip such as those found in West Hackberry and other Gulf Coast salt dome fields, reservoir performance has shown that gravity drainage recoveries average 80% to 90% of the original oil in place while waterdrive recoveries average 50% to 60% of the original oil in place. The target for tertiary oil recovery in the Double Displacement Process is the incremental oil between the 50% to 60% waterdrive recoveries and the 80% to 90% gravity drainage recoveries. Air injection on the west flank began in November of 1994. Although west flank air injection has increased reservoir pressure by 500 pounds per square inch (psi), production response has not yet occurred. The gas cap on the west flank has not expanded sufficiently to push the oil rim down to the nearest downstructure well.
Date: September 30, 1997
Creator: Fornea, Allen; Cerveny, Bruce & Gillham, Travis H.
Partner: UNT Libraries Government Documents Department

Development of a System Wide Predator Control Program: Stepwise Implementation of a Predation Index, Predator Control Fisheries, and Evaluation Plan in the Columbia River Basin; Section II: Evaluation; 1996 Annual Report.

Description: Predator control fisheries aimed at reducing predation on juvenile salmonids by northern squawfish (Ptychocheilus oregonensis) were implemented for the seventh consecutive year in the mainstream Columbia and Snake rivers.
Date: November 1, 1997
Creator: Young, Franklin R.
Partner: UNT Libraries Government Documents Department

Spent nuclear fuel project multi-year work plan WBS {number_sign}1.4.1

Description: The Spent Nuclear Fuel (SNF) Project Multi-Year Work Plan (MYWP) is a controlled living document that contains the current SNF Project Technical, Schedule and Cost Baselines. These baselines reflect the current Project execution strategies and are controlled via the change control process. Other changes to the MYWP document will be controlled using the document control process. These changes will be processed as they are approved to keep the MYWP a living document. The MYWP will be maintained continuously as the project baseline through the life of the project and not revised annually. The MYWP is the one document which summarizes and links these three baselines in one place. Supporting documentation for each baseline referred to herein may be impacted by changes to the MYWP, and must also be revised through change control to maintain consistency.
Date: March 1, 1997
Creator: Wells, J.L.
Partner: UNT Libraries Government Documents Department

CSER 97-001 Criticality safety limits for PFP 26-inch vacuum lineremoval

Description: As part of the plutonium stabilization operations in the 234-5Z Building, several runs of 26-inch (26 inches of Hg) process vacuum header, along with associated smaller piping is to be cut into sections and disposed of. This criticality safety evaluation report (CSER) requested by Nirider (1996) addresses the removal of several hundred feet of abandoned 3 and 4 inch nominal diameter vacuum header and associated smaller diameter piping runs located in the duct level of the 234-5Z Building in rooms 262, 263, and 264 as shown in the two attached drawings.
Date: February 14, 1997
Creator: Himes, D. A.
Partner: UNT Libraries Government Documents Department

Productivity and Injectivity of Horizontal Wells

Description: A general wellbore flow model is presented to incorporate not only frictional, accelerational and gravitational pressure drops, but also the pressure drop caused by inflow. Influence of inflow or outflow on the wellbore pressure drop is analyzed. New friction factor correlations accounting for both inflow and outflow are also developed. The greatest source of uncertainty is reservoir description and how it is used in simulators. Integration of data through geostatistical techniques leads to multiple descriptions that all honor available data. The reality is never known. The only way to reduce this uncertainty is to use more data from geological studies, formation evaluation, high resolution seismic, well tests and production history to constrain stochastic images. Even with a perfect knowledge about reservoir geology, current models cannot do routine simulations at a fine enough scale. Furthermore, we normally don't know what scale is fine enough. Upscaling introduces errors and masks some of the physical phenomenon that we are trying to model. The scale at which upscaling is robust is not known and it is probably smaller in most cases than the scale actually used for predicting performance. Uncertainties in the well index can cause errors in predictions that are of the same magnitude as those caused by reservoir heterogeneities. Simplified semi-analytical models for cresting behavior and productivity predictions can be very misleading.
Date: April 29, 1997
Creator: Aziz, Khalid; Arababi, Sepehr & Hewett, Thomas A.
Partner: UNT Libraries Government Documents Department

Development of Novel Activated Carbon-Based Adsorbents for Control of Mercury Emission From Coal-Fired Power Plants

Description: The overall objective of this study is to evaluate pertinent design and operational parameters that would enable successful application of activated carbon adsorption for the reduction of mercury emissions from coal-fired power plants. The study will evaluate the most suitable impregnate such as sulfur, chloride and other chelating agents for its ability to enhance the adsorptive capacity of activated carbon for mercury vapor under various process conditions. The main process variables to be evaluated include temperature, mercury concentration and speciation, relative humidity, oxygen content, and presence of SO2 and NOx in the flue gas. The optimal amount of impregnate for each of these carbons will be determined based on the exhibited performance. Another important parameter which governs the applicability of adsorption technology for the flue gas clean up is the rate at which vapor phase mercury is being removed from the flue gas by activated carbon. Therefore, the second part of this study will evaluate the adsorption kinetics using the impregnated activated carbons listed above. The rate of mercury uptake will also be evaluated under the process conditions that are representative of coal-fired power plants. Concerned with the ability of the adsorbed mercury to migrate back into the environment once saturated adsorbent is removed from the system, the study will also focus on the mercury desorption rate as a function of the type of impregnate, loading conditions, and the time of contact prior to disposal.
Date: September 8, 1997
Creator: Vidic, Radisav D.
Partner: UNT Libraries Government Documents Department

Indexes to Nuclear Regulatory Commission issuances, July--December 1996. Volume 44, Index 2

Description: Digests and indexes for issuances of the Commission (CLI), the Atomic Safety and Licensing Board Panel (LBP), the Administrative Law Judges (ALJ), the Directors` Decisions (DD), and the Decision on Petitions for Rulemaking (DPRM) are presented in this document. These digests and indexes are intended to serve as a guide to the issuances. Information elements common to the cases heard and ruled upon are: case name (owner(s) of facility); full text reference (volume and pagination); issuance number; issues raised by apellants; legal citations (cases, regulations, and statutes); name of facility, docket number; subject matter of issues and/or rulings; type of hearing (operating license, operating license amendment, etc.); type of issuance (memorandum, order, decision, etc.).
Date: April 1, 1997
Partner: UNT Libraries Government Documents Department

Fracture toughness evaluations of TP304 stainless steel pipes

Description: In the IPIRG-1 program, the J-R curve calculated for a 16-inch nominal diameter, Schedule 100 TP304 stainless steel (DP2-A8) surface-cracked pipe experiment (Experiment 1.3-3) was considerably lower than the quasi-static, monotonic J-R curve calculated from a C(T) specimen (A8-12a). The results from several related investigations conducted to determine the cause of the observed toughness difference are: (1) chemical analyses on sections of Pipe DP2-A8 from several surface-cracked pipe and material property specimen fracture surfaces indicate that there are two distinct heats of material within Pipe DP2-A8 that differ in chemical composition; (2) SEN(T) specimen experimental results indicate that the toughness of a surface-cracked specimen is highly dependent on the depth of the initial crack, in addition, the J-R curves from the SEN(T) specimens closely match the J-R curve from the surface-cracked pipe experiment; (3) C(T) experimental results suggest that there is a large difference in the quasi-static, monotonic toughness between the two heats of DP2-A8, as well as a toughness degradation in the lower toughness heat of material (DP2-A8II) when loaded with a dynamic, cyclic (R = {minus}0.3) loading history.
Date: February 1, 1997
Creator: Rudland, D.L.; Brust, F.W. & Wilkowski, G.M.
Partner: UNT Libraries Government Documents Department

Testing of sludge coating adhesiveness on fuel elements in 105-K west basin

Description: This report summarizes the results from the first sludge adherence tests performed in the 105-K West Basin on N Reactor fuel. The outside surface of the outer fuel elements were brushed, using stainless steel wire brushes, to test the adhesiveness of various types of sludge coatings to the cladding`s surface. The majority of the sludge was removed by the wire brushes in this test but different types of sludge were more adhesive than others. Particularly, an orange rust-like sludge coating that was just slightly more adherent to the fuel`s cladding than the majority of the sludge coatings and a thick white vertical strip sludge coating that was much more difficult to remove. The test demonstrated that all of the sludge could be removed from the outer fuel elements` surfaces if the need arises.
Date: March 11, 1997
Creator: Maassen, D.P., Fluor Daniel Hanford
Partner: UNT Libraries Government Documents Department

Monthly energy review, April 1997

Description: This report presents an overview of monthly energy statistics. The statistics cover the major activities of U.S. production, consumption, trade, stocks, and prices for petroleum, natural gas, coal, electricity, and nuclear energy. International energy and thermal metric conversion factors are included.
Date: April 1, 1997
Partner: UNT Libraries Government Documents Department

Office of Inspector General report on audit of work force restructuring under Section 3161 of the National Defense Authorization Act

Description: As authorized by the National Defense Authorization Act for Fiscal year 1993, Department of Energy (Department) policy is to provide educational assistance to terminated contractor employees who were impacted by the Department`s downsizing. A terminated employee is anyone who voluntarily or involuntarily departs due to a reduction in employment under a Departmental restructuring plan. The objectives of the audit were to determine if the Department provided (1) reasonable means for terminated contractor employees to obtain training to qualify for new employment and (2) reasonable compensation to southern Nevada for any impact the Department`s downsizing had on the community.
Date: May 1, 1997
Partner: UNT Libraries Government Documents Department

National synchrotron light source. Activity report, October 1, 1995--September 30, 1996

Description: The hard work done by the synchrotron radiation community, in collaboration with all those using large-scale central facilities during 1995, paid off in FY 1996 through the DOE`s Presidential Scientific Facilities Initiative. In comparison with the other DOE synchrotron radiation facilities, the National Synchrotron Light Source benefited least in operating budgets because it was unable to increase running time beyond 100%-nevertheless, the number of station hours was maintained. The major thrust at Brookhaven came from a 15% increase in budget which allowed the recruitment of seven staff in the beamlines support group and permitted a step increment in the funding of the extremely long list of upgrades; both to the sources and to the beamlines. During the December 1995 shutdown, the VUV Ring quadrant around U10-U12 was totally reconstructed. New front ends, enabling apertures up to 90 mrad on U10 and U12, were installed. During the year new PRTs were in formation for the infrared beamlines, encouraged by the investment the lab was able to commit from the initiative funds and by awards from the Scientific Facilities Initiative. A new PRT, specifically for small and wide angle x-ray scattering from polymers, will start work on X27C in FY 1997 and existing PRTs on X26C and X9B working on macromolecular crystallography will be joined by new members. Plans to replace aging radio frequency cavities by an improved design, originally a painfully slow six or eight year project, were brought forward so that the first pair of cavities (half of the project for the X-Ray Ring) will now be installed in FY 1997. Current upgrades to 350 mA initially and to 438 mA later in the X-Ray Ring were set aside due to lack of funds for the necessary thermally robust beryllium windows. The Scientific Facilities Initiative allowed purchase of all 34 ...
Date: May 1, 1997
Creator: Rothman, E.Z. & Hastings, J.B.
Partner: UNT Libraries Government Documents Department

Implantation activation annealing of Si-implanted gallium nitride at temperatures > 1,100 C

Description: The activation annealing of Si-implanted GaN is reported for temperatures from 1,100 to 1,400 C. Although previous work has shown that Si-implanted GaN can be activated by a rapid thermal annealing at {approximately}1,100 C, it was also shown that significant damage remained in the crystal. Therefore, both AlN-encapsulated and uncapped Si-implanted GaN samples were annealed in a metal organic chemical vapor deposition system in a N{sub 2}/NH{sub 3} ambient to further assess the annealing process. Electrical Hall characterization shows increases in carrier density and mobility for annealing up to 1,300 C before degrading at 1,400 C due to decomposition of the GaN epilayer. Rutherford backscattering spectra show that the high annealing temperatures reduce the implantation induced damage profile but do not completely restore the as-grown crystallinity.
Date: June 1, 1997
Creator: Zolper, J.C.; Han, J. & Biefeld, R.M.
Partner: UNT Libraries Government Documents Department

Control of light saturated photosynthesis: Concentration and activity of ribulose bisphosphate carboxylase. Final report, September 1, 1993--February 28, 1997

Description: Ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) is one of the most abundant enzymes on the planet and is responsible for catalysing the net fixation of CO{sub 2} into organic matter. It is central, therefore, to primary productivity in marine and terrestrial ecosystems. Rubisco is a large enzyme with low substrate affinity and low catalytic efficiency and is considered to limit the rate of light-saturated photosynthesis. This report summarizes research into the molecular basis of the regulation of phytoplankton photosynthesis. It describes experimental and theoretical studies of the role of Rubisco in regulating the photosynthetic rate of phytoplankton. It also describes the integration of a mechanistically based phytoplankton growth model into a description of primary productivity in the sea. This work was conducted as part of the Ocean Margins Program.
Date: May 1, 1997
Creator: Geider, R.J.
Partner: UNT Libraries Government Documents Department

Performance prediction for complex parallel applications

Description: Today`s massively parallel machines are typically message-passing systems consisting of hundreds or thousands of processors. Implementing parallel applications efficiently in this environment is a challenging task, and poor parallel design decisions can be expensive to correct. Tools and techniques that allow the fast and accurate evaluation of different parallelization strategies would significantly improve the productivity of application developers and increase throughput on parallel architectures. This paper investigates one of the major issues in building tools to compare parallelization strategies: determining what type of performance models of the application code and of the computer system are sufficient for a fast and accurate comparison of different strategies. The paper is built around a case study employing the Performance Prediction Tool (PerPreT) to predict performance of the Parallel Spectral Transform Shallow Water Model code (PSTSWM) on the Intel Paragon. 13 refs., 6 tabs.
Date: April 1997
Creator: Brehm, J. & Worley, P. H.
Partner: UNT Libraries Government Documents Department

Increased oil production and reserves from improved completion techniques in the Bluebell field, Uinta Basin. Quarterly technical report, October 1, 1996--December 31, 1996

Description: The objective of this project is to increase oil production and reserves in the Uinta Basin by demonstrating improved completion techniques. Low productivity of Uinta Basin wells is caused by gross production intervals of several thousand feet that contain perforated thief zones, water-bearing zones, and unperforated oil-bearing intervals. Geologic and engineering characterization and computer simulation of the Green River and Wasatch formations in the Bluebell field will determine reservoir heterogeneities related to fractures and depositional trends. This will be followed by drilling and recompletion of several wells to demonstrate improved completion techniques based on the reservoir characterization. Transfer of the project results will be an ongoing component of the project. The recompletion of the Michelle Ute 7-1 well commenced and is the first step in the three-well demonstration. As part of the recompletion, the gross productive interval was logged, additional beds were perforated, and the entire interval was stimulated with a three-stage acid treatment. The operator attempted to stimulate the well at high pressure (about 10,000 pounds per square inch (psi) [68,950 kPa]) at three separate packer locations. But at each location the pressure would not hold. As a result, all three stages were pumped at a lower pressure (6500 psi maximum [44,820 kPa]) from one packer location. As of December 31, 1996, the operator was tripping in the hole with the production packer and tubing to begin swab testing the well.
Date: February 1, 1997
Creator: Morgan, C.D.
Partner: UNT Libraries Government Documents Department

Chemical research at Argonne National Laboratory

Description: Argonne National Laboratory is a research and development laboratory located 25 miles southwest of Chicago, Illinois. It has more than 200 programs in basic and applied sciences and an Industrial Technology Development Center to help move its technologies to the industrial sector. At Argonne, basic energy research is supported by applied research in diverse areas such as biology and biomedicine, energy conservation, fossil and nuclear fuels, environmental science, and parallel computer architectures. These capabilities translate into technological expertise in energy production and use, advanced materials and manufacturing processes, and waste minimization and environmental remediation, which can be shared with the industrial sector. The Laboratory`s technologies can be applied to help companies design products, substitute materials, devise innovative industrial processes, develop advanced quality control systems and instrumentation, and address environmental concerns. The latest techniques and facilities, including those involving modeling, simulation, and high-performance computing, are available to industry and academia. At Argonne, there are opportunities for industry to carry out cooperative research, license inventions, exchange technical personnel, use unique research facilities, and attend conferences and workshops. Technology transfer is one of the Laboratory`s major missions. High priority is given to strengthening U.S. technological competitiveness through research and development partnerships with industry that capitalize on Argonne`s expertise and facilities. The Laboratory is one of three DOE superconductivity technology centers, focusing on manufacturing technology for high-temperature superconducting wires, motors, bearings, and connecting leads. Argonne National Laboratory is operated by the University of Chicago for the U.S. Department of Energy.
Date: April 1, 1997
Partner: UNT Libraries Government Documents Department

Technetium in alkaline, high-salt, radioactive tank waste supernate: Preliminary characterization and removal

Description: This report describes the initial work conducted at Pacific Northwest National Laboratory to study technetium (Tc) removal from Hanford tank waste supernates and Tc oxidation state in the supernates. Filtered supernate samples from four tanks were studied: a composite double shell slurry feed (DSSF) consisting of 70% from Tank AW-101, 20% from AP-106, and 10% from AP-102; and three complexant concentrate (CC) wastes (Tanks AN-107, SY-101, ANS SY-103) that are distinguished by having a high concentration of organic complexants. The work included batch contacts of these waste samples with Reillex{trademark}-HPQ (anion exchanger from Reilly Industries) and ABEC 5000 (a sorbent from Eichrom Industries), materials designed to effectively remove Tc as pertechnetate from tank wastes. A short study of Tc analysis methods was completed. A preliminary identification of the oxidation state of non-pertechnetate species in the supernates was made by analyzing the technetium x-ray absorption spectra of four CC waste samples. Molybdenum (Mo) and rhenium (Re) spiked test solutions and simulants were tested with electrospray ionization-mass spectrometry to evaluate the feasibility of the technique for identifying Tc species in waste samples.
Date: January 1, 1997
Creator: Blanchard, D.L. Jr.; Brown, G.N. & Conradson, S.D.
Partner: UNT Libraries Government Documents Department