Search Results

open access

Preliminary Report on Magnetogasdynamic Aspects

Description: Report describing studies on magnetogasdynamic aspects, presented in three sections: a summary of relevant magnetofluidmechanic fundamentals; a review of relevant literature on flow modification in magnetofluidmechnics; and the results of analytical investigations on highly restricted magnetofluidmechanic flows.
Date: August 1961
Creator: Chenoweth, D. R.
Partner: UNT Libraries Government Documents Department
open access

The Use of Compensation With Directional Couplers

Description: Abstract: The accurate measurement of voltage standing wave ratio (VSWR) is of prime importance in the production of microwave systems. The work reported in this memorandum was undertaken in the development of a faster system for measuring VSWR.
Date: January 1961
Creator: Lincoln, Roland Alan
Partner: UNT Libraries Government Documents Department
open access

Positional Tolerancing at Sandia Corporation

Description: Abstract: "This report presents a brief introduction to the Positional Tolerance Method of DImensioning as employed by Sandia Corporation. The emphasis is placed on the elimination of ambiguities and increase in tolerances provided by this method as compared to the older, bilateral method" (p. 2).
Date: September 1961
Creator: Sandia Corporation
Partner: UNT Libraries Government Documents Department
open access

Wind Tunnel Study of the Influence of Orifice Geometry and Flow Rates on the Measured Pressure Error of a Static Pressure Probe at Mach 3

Description: Abstract: Tests were conducted in the Jet Propulsion Laboratory's 20-inch Supersonic Wind Tunnel to determine the effect of hole-spacing geometry on the measured pressure error due to "breathing" for a pressure-sensing probe at Mach 3.01.
Date: November 1960
Creator: Zumwalt, Glen W.
Partner: UNT Libraries Government Documents Department
open access

A Confidence Limit Computer

Description: Introduction: Confidence limits as a mathematical tool are applicable to many development engineering and production engineering situations. In order to make confidence limits readily available to engineers, a computer was designed which will approximate certain confidence limits.
Date: April 1960
Creator: Muench, Joseph O.
Partner: UNT Libraries Government Documents Department
open access

A Transistorized Reactivity Measurement System

Description: An all-transistor system has been developed to be used in measuring the reactivity of the reactor in the Sandia Engineering Reactor Facility. In operation, the system triggers a pulsed neutron source (PNS) in the reactor and counts the resulting neutron flux, thus giving a measure of the time constant of the reactor. The counting is done in eleven time-sequenced counting channels. The reactor time constant is a measure of the reactor reactivity.
Date: July 6, 1960
Creator: Ehrman, Leonard
Partner: UNT Libraries Government Documents Department
open access

APOTA (Automatic Positioning of Telemetering Antennas)

Description: This report presents a description of and operating instructions for APOTA--a device which automatically tracks any signal-emitting source within the 190 to 250 MC band. APOTA is especially useful for telemetering applications.
Date: September 14, 1955
Creator: Palmer, James E.; Crawley, T. V. & Lannon, J. T.
Partner: UNT Libraries Government Documents Department
open access

A Pulse Ammeter

Description: A quantizing pulse ammeter has been designed which brackets an input pulse current peak between two preset current levels. These levels are easily selected by calibration circuits contained on the chassis. Readout is presented in the form of a Nixie visual display as well as an output which is suitable for automatic data recording.
Date: August 1961
Creator: Newman, J. J.
Partner: UNT Libraries Government Documents Department
open access

Craters From Four Equal Charges in a Horizontal Square Array

Description: Craters were observed resulting from square arrays of 64-pound charges at various spacings and depths. The closest spacings yielded craters very like those from single 256-pound charges, while wider spacings yielded craters more or less square in shape and with a mound or pier at the center. Generally, the areas so uncovered were greater than for single 256-pound charges, except for very deep charges. Volumes, too, were enhanced by this configuration by as much as a factor of three. If the same… more
Date: March 1965
Creator: Vortman, Luke J.
Partner: UNT Libraries Government Documents Department
open access

Re-entry Flight Demonstration No. 1 (RFD-1): Optical Data and Fuel-Element Experiment

Description: This report on the RFD-1 optical data and external fuel-element experiment includes a description of the instruments and test components used, a presentation of the data obtained, an explanation of the methods of data reduction employed, and a statement of the conclusions derived. It covers the theory, design, qualification tests, flight-test data, and results of the external fuel-element experiment. Also presented is a theoretical analysis of observed versus predicted ablation times and altitu… more
Date: October 1964
Creator: White, I. B.
Partner: UNT Libraries Government Documents Department
open access

Proceedings of the International Symposium for Packaging and Transportation of Radioactive Materials: 1965

Description: Forword: The International Symposium for Packaging and Transportation of radioactive materials held at Albuquerque, New Mexico, January 12 to 15, 1965, was a joint effort on the part of the Sandia Corporation, the Albuquerque Operations Office, and the Headquarters, U.S. Atomic Energy Commission.
Date: June 1965
Partner: UNT Libraries Government Documents Department
open access

Positional Tolerancing at Sandia Corporation

Description: Abstract: "This brochure presents a brief introduction to the Positional Tolerance Method of DImensioning as employed by Sandia Corporation. The emphasis is placed on the elimination of ambiguities and increase in tolerances provided by this method as compared to the older, bilateral method."
Date: May 1959
Creator: Sandia Corporation. Design Definition Department.
Partner: UNT Libraries Government Documents Department
open access

Re-entry Flight Demonstration Number One (RFD-1): Preflight Disassembly Analysis and Observed Disassembly of the Simulated SNAP-10A Reactor

Description: Abstract: This report describes the SNAP-10A Simulated Test Reactor, the test philosophy of Re-entry Flight Demonstration Number One, the analytical analysis of reactor disassembly, and the results of the flight test.
Date: September 1964
Creator: Klett, R. D.; Hysinger, T. M. & Robertson, M. M.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen