15,683 Matching Results

Search Results

Convention for the Protection of Plants : message from the President of the United States transmitting the International Convention for the Protection of New Varieties of Plants of December 2, 1961, as revised at Geneva on November 10, 1972, on October 23, 1978, and on March 19, 1991, and signed by the United States on October 25, 1991

Description: This treaty takes action to control the introduction and spread of pests of plants and plant products. The treaty protects natural as well as cultivated plants, so it has implications for agriculture as well as biodiversity. While the IPPC's primary focus is on plants and plant products moving in international trade, the convention also covers research materials, biological control organisms, and anything else that can act as a vector for the spread of plant pests including containers, soil, vehicles, and machinery.
Date: October 25, 1995
Creator: International Union for the Protection of New Varieties of Plants
Partner: UNT Libraries

Riddler Dress

Description: Dress of black sueded polyester/lycra knit with green "Riddler" question marks printed in various sizes. The t-shirt style dress is knee length, with rounded neckline and short sleeves. Unlined.
Date: 1995
Creator: Oldham, Todd
Partner: UNT College of Visual Arts + Design

Riddler Jacket

Description: Jacket of black polyester satin printed with green "Riddler" question marks of various sizes. The hip-length jacket is single breasted with three oval gray metal (pewter?) "Batman" symbol buttons, and notched collar. Two front patch pockets. Long sleeves. Lined in green polyester satin with large black question mark on center back.
Date: 1995
Creator: Oldham, Todd
Partner: UNT College of Visual Arts + Design

Riddler Cocktail Dress

Description: Dress of sueded black polyester/lycra knit with green "Riddler" question marks printed in various sizes, the question marks covered in applied clear novelty "sequins". The knee-length dress has a scoop neckline, and spaghetti straps formed of gray metal (pewter?) question marks set with emerald green rhinestones. Unlined.
Date: 1995
Creator: Oldham, Todd
Partner: UNT College of Visual Arts + Design

[Night Triptych - Middle Panel]

Description: Photograph of the inside of a building that has decorative stone floors, and curved walls that have marbled columns or supports. This image is the center panel of a triptych titled "Night Triptych" featuring nighttime photos of a building.
Date: [1995..2005]
Creator: Williams, Byrd M. (Byrd Moore), IV, 1951-
Partner: UNT Libraries Special Collections

[Night Triptych - Right Panel]

Description: Photograph of the outside of a building that has curved entryway and decorative stonework on the exterior. An overpass and buildings are visible in the background. This image is the rightmost panel of a triptych titled "Night Triptych" featuring nighttime photos of a building.
Date: [1995..2005]
Creator: Williams, Byrd M. (Byrd Moore), IV, 1951-
Partner: UNT Libraries Special Collections

[Night Triptych - Left Panel]

Description: Photograph of the inside of a building that has decorative stone floors, columns, and decorative woodwork or stonework on the ceilings. This image is the leftmost panel of a triptych titled "Night Triptych" featuring nighttime photos of a building.
Date: [1995..2005]
Creator: Williams, Byrd M. (Byrd Moore), IV, 1951-
Partner: UNT Libraries Special Collections

Is It Too Late?: A Theology of Ecology

Description: This book was the first single-authored book that covered ecological ethics and theology. It discusses key philosophical, theological, and ecological issues for Christians and other concerned citizens.
Date: 1995
Creator: Cobb, John B., Jr.
Partner: UNT Center For Environmental Philosophy

Precision solid liner experiments on Pegasus II

Description: Pulsed power systems have been used in the past to drive solid liner implosions for a variety of applications. In combination with a variety of target configurations, solid liner drivers can be used to compress working fluids, produce shock waves, and study material properties in convergent geometry. The utility of such a driver depends in part on how well-characterized the drive conditions are. This, in part, requires a pulsed power system with a well-characterized current wave form and well understood electrical parameters. At Los Alamos, the authors have developed a capacitively driven, inductive store pulsed power machine, Pegasus, which meets these needs. They have also developed an extensive suite of diagnostics which are capable of characterizing the performance of the system and of the imploding liners. Pegasus consists of a 4.3 MJ capacitor bank, with a capacitance of 850 {micro}f fired with a typical initial bank voltage of 90 kV or less. The bank resistance is about 0.5 m{Omega}, and bank plus power flow channel has a total inductance of about 24 nH. In this paper the authors consider the theory and modeling of the first precision solid liner driver fielded on the LANL Pegasus pulsed power facility.
Date: September 1, 1995
Creator: Bowers, R.L.; Brownell, J.H. & Lee, H.
Partner: UNT Libraries Government Documents Department

World nuclear outlook 1995

Description: As part of the EIA program to provide energy information, this analysis report presents the current status and projections through 2015 of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. It also contains information and forecasts of developments in the uranium market. Long-term projections of US nuclear capacity, generation, and spent fuel discharges for two different scenarios through 2040 are developed for the Department of Energy`s Office of Civilian Radioactive Waste Management (OCRWM). In turn, the OCRWM provides partial funding for preparation of this report. The projections of uranium requirements are provided to the Organization for Economic Cooperation and Development (OECD) for preparation of the Nuclear Energy Agency/OECD report, Summary of Nuclear Power and Fuel Cycle Data in OECD Member Countries.
Date: September 29, 1995
Partner: UNT Libraries Government Documents Department

Microwave melt and offgas analysis results from a Ferro Corporation{reg_sign} glass frit

Description: In support of the Residue Treatment Technology (RTT) Microwave Solidification project, Waste Projects and Surface Water personnel conducted a series of experiments to determine the feasibility of encapsulating a surrogate sludge waste using the microwave melter. The surrogate waste was prepared by RTT and melted with five varying compositions of low melting glass frit supplied by the Ferro Corporation. Samples were melted using a 50% waste/50% glass frit and a 47.5% waste/47.5% glass frit/5% carbon powder. This was done to evaluate the effectiveness of carbon at reducing a sulfate-based surface scale which has been observed in previous experiments and in full-scale testing. These vitrified samples were subsequently submitted to Environmental Technology for toxicity characteristic leaching procedure (TCLP) testing. Two of the five frits tested in this experiment merit further evaluation as raw materials for the microwave melter. Ferro frit 3110 with and without carbon powder produced a crystalline product which passed TCLP testing. The quality of the melt product could be improved by increasing the melting temperature from 900{degrees}C to approximately 1150-1200{degrees}C. Ferro frit 3249 produced the optimal quality of glass based on visual observations, but failed TCLP testing for silver when melted without carbon powder. This frit requires a slightly higher melting temperature ({ge} 1200{degrees}C) compared to frit 3110 and produces a superior product. In conjunction with this work, Surface Water personnel conducted offgas analyses using a Thermal Desorption Mass Spectrometer (TDMS) on selected formulations. The offgas analyses identified and quantified water vapor (H{sub 2}O), oxygen (O{sub 2}) and carbon oxides (CO and CO{sub 2}), sulfur (S) and sulfur oxides (SO and SO{sub 2}), and nitrogen (N{sub 2}) and nitrogen oxides (NO and NO{sub 2}) that volatilized during glass formation.
Date: March 1, 1995
Creator: Phillips, J.A.; Hoffman, C.R. & Knutson, P.T.
Partner: UNT Libraries Government Documents Department

500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Technical progress report, second quarter 1994, April 1994--June 1994

Description: This quarterly report discusses the technical progress of an Innovative Clean Coal Technology (ICCT) demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from coal-fired boilers. The project is being conducted at Georgia Power Company`s Plant Hammond Unit 4 located near Rome, Georgia. The primary goal of this project is the characterization of the low NOx combustion equipment through the collection and analysis of long-term emissions data. A target of achieving fifty percent NOx reduction using combustion modifications has been established for the project. The project provides a stepwise retrofit of an advanced overfire air (AOFA) system followed by low NOx burners (LNB). During each test phase of the project, diagnostic, performance, long-term, and verification testing will be performed. These tests are used to quantify the NOx reductions of each technology and evaluate the effects of those reductions on other combustion parameters. Results are described.
Date: September 1, 1995
Partner: UNT Libraries Government Documents Department

Criticality benchmark results for the ENDF60 library with MCNP{trademark}

Description: The continuous-energy neutron data library ENDF60, for use with the Monte Carlo N-Particle radiation transport code MCNP4A, was released in the fall of 1994. The ENDF60 library is comprised of 124 nuclide data files based on the ENDF/B-VI (B-VI) evaluations through Release 2. Fifty-two percent of these B-VI evaluations are translations from ENDF/B-V (B-V). The remaining forty-eight percent are new evaluations which have sometimes changed significantly. Among these changes are greatly increased use of isotopic evaluations, more extensive resonance-parameter evaluations, and energy-angle correlated distributions for secondary particles. In particular, the upper energy limit for the resolved resonance region of {sup 235}U, {sup 238}U and {sup 239}Pu has been extended from 0.082, 4.0, and 0.301 keV to 2..25, 10.0, and 2.5 keV respectively. As regulatory oversight has advanced and performing critical experiments has become more difficult, there has been an increased reliance on computational methods. For the criticality safety community, the performance of the combined transport code and data library is of interest. The purpose of this abstract is to provide benchmarking results to aid the user in determining the best data library for their application.
Date: July 1, 1995
Creator: Keen, N.D.; Frankle, S.C. & MacFarlane, R.E.
Partner: UNT Libraries Government Documents Department

Fire modeling of the Heiss Dampf Reaktor containment

Description: This report summarizes Sandia National Laboratories` participation in the fire modeling activities for the German Heiss Dampf Reaktor (HDR) containment building, under the sponsorship of the United States Nuclear Regulatory Commission. The purpose of this report is twofold: (1) to summarize Sandia`s participation in the HDR fire modeling efforts and (2) to summarize the results of the international fire modeling community involved in modeling the HDR fire tests. Additional comments, on the state of fire modeling and trends in the international fire modeling community are also included. It is noted that, although the trend internationally in fire modeling is toward the development of the more complex fire field models, each type of fire model has something to contribute to the understanding of fires in nuclear power plants.
Date: September 1995
Creator: Nicolette, V. F. & Yang, K. T.
Partner: UNT Libraries Government Documents Department

The Carnol process for CO{sub 2} mitigation from power plants and the transportation sector

Description: A CO{sub 2} mitigation process is developed which converts waste CO{sub 2}, primarily recovered from coal-fired power plant stack gases with natural gas, to produce methanol as a liquid fuel and coproduct carbon as a materials commodity. The Carnol process chemistry consists of methane decomposition to produce hydrogen which is catalytically reacted with the recovered waste CO{sub 2} to produce methanol. The carbon is either stored or sold as a materials commodity. A process design is modelled and mass and energy balances are presented as a function of reactor pressure and temperature conditions. The Carnol process is a viable alternative to sequestering CO{sub 2} in the ocean for purposes of reducing CO{sub 2} emissions from coal burning power plants. Over 90% of the CO{sub 2} from the coal burning plant is used in the process which results in a net CO{sub 2} emission reduction of over 90% compared to that obtained for conventional methanol production by steam reforming of methane. Methanol as an alternative liquid fuel for automotive engines and for fuel cells achieves additional CO{sub 2} emission reduction benefits. The economics of the process is greatly enhanced when carbon can be sold as a materials commodity. Improvement in process design and economics should be achieved by developing a molten metal (tin) methane decomposition reactor and a liquid phase, slurry catalyst, methanol synthesis reactor directly using the solvent saturated with CO{sub 2} scrubbed from the power plant stack gases. The benefits of the process warrant its further development.
Date: August 1, 1995
Creator: Steinberg, M.
Partner: UNT Libraries Government Documents Department

Preliminary analysis of core capsule x-ray spectroscopy and image results for medium-to-high growth factor implosions

Description: Recent capsule implosions using indirect drive on NOVA have probed core and near-core capsule T{sub e}, {rho} and mix structure using non-trivial pulse shapes (i.e. with a foot). These experiments have been performed using smooth as well as artificially roughened capsules. They have been performed using basically 3 non-trivial pulse-shapes with 3 different types of capsules with correspondingly different growth regimes for Rayleigh-Taylor instabilities. These experiments have employed time-dependent spectroscopy, gated imaging and absolutely calibrated time-integrated imaging as x-ray diagnostics. The authors compare nominal and {open_quotes}modified{close_quotes} 1D calculations with the spectroscopic and time-integrated image results. They find that the core T{sub e} is less than calculated (not surprising), but also that the T{sub e} of the inner pusher is substantially higher (at least 20%) than predicted, with perhaps some enhanced mix of the PVA layer towards the core.
Date: September 1, 1995
Creator: Pollak, G.; Delamater, N. & Landen, N.
Partner: UNT Libraries Government Documents Department