Search Results

open access

Delta-Phase Zirconium Hydride as a Solid Moderator

Description: Abstract: "In a study of the preparation and properties of delta-phase zirconium hydride it was found that large, sound bodies of the hydride can be prepared by direct combination of the elements if the rate of the reaction is retarded by limiting the supply of available hydrogen. Specimens up to 1-in. diameter were prepared using this technique. Because delta phase zirconium hydride does not readily form eutectics with iron-and nickel-base alloys below 1800 F these materials may be utilized fo… more
Date: December 18, 1957
Creator: Vetrano, James B.
Partner: UNT Libraries Government Documents Department
open access

The Cladding of Delta-Phase Zirconium Hydride

Description: Abstract: A study has been made of the cladding of solid and powdered delta-phase zirconium hydride is both red and flat shapes with stainless steel. The program included investigations of metallurgical bonding, both with and without the sore of metallic barrier materials. Types 304 and 347 stainless steel were used for cladding material. The intermediate barrier-layer materials used were niobium, molybdenum, a combination of copper and molybdenum, and a combination of copper and niobium. The p… more
Date: December 27, 1957
Creator: Paprocki, Stan J.; Hodge, Edwin S. & Boyer, Charles B.
Partner: UNT Libraries Government Documents Department
open access

Canning graphite for gas-cooled reactors

Description: From abstract: "A preliminary investigation was made of techniques and materials for canning graphite to protect it for use at high temperatures in a nitrogen-oxygen atmosphere"
Date: 1959
Creator: Paprocki, Stan J.; Carlson, Ronald J. & Bonnell, Paul H.
Partner: UNT Libraries Government Documents Department
open access

The Effect of Fabrication Variables on the Structure and Properties of UO₂-Stainless Steel Dispersion Fuel Plates

Description: From introduction: "This report deals with a part of the research and development studies which preceded the manufacture of fuel elements for the Gas Cooled Reactor Experiment (GCRE)." The studies evaluate the effects of varying the type and size of UO2 particles, stainless steel matrix powders, blending procedures, compacting pressures, sintering times, temperatures and atmospheres, roll-cladding temperatures and reduction rates, total cold reduction, and heat-treating times and temperatures h… more
Date: February 18, 1959
Creator: Paprocki, Stan J.; Keller, Donald L. & Cunningham, G. W.
Partner: UNT Libraries Government Documents Department
open access

Centrifugal Casting of Aluminum-Uranium Alloys

Description: "Centrifugal-casting techniques were investigated as a method of producing hollow cylindrical extrusion billets of aluminum-35 w/o uranium. Among the variables evaluated were melt temperature, mold and pouring-spout configurations, mold speed, and method of pouring. With the equipment employed it was found that the best castings were produced stilizing a pouring temperature of 2400 F, a heavy-walled steel cylinder rotating between 700 to 900 rpm for the mold and bottom-pouring technique employi… more
Date: July 20, 1959
Creator: Daniel, Norman E.; Foster, Ellis L. & Dickerson, Ronald F.
Partner: UNT Libraries Government Documents Department
open access

Shielding Studies on Salt Slabs, Gadolinium, and Water

Description: Review of a study regarding a lid-tank shielding facility's properties, including fast-neutron and gamma dose rates and thermal-neutron fluxes, which were mapped in a symmetry plane. The removal cross section of gadolinium was determined through comparison with various other materials.
Date: October 7, 1959
Creator: Klingensmith, Raymond W.; Epstein, Harold M. & Chastain, Joel W.
Partner: UNT Libraries Government Documents Department
open access

The Electrical Properties of Uranium Oxides

Description: From introduction: "The work described here was part of an integrated investigation of the fundamental properties of uranium oxides done for the Mallinckrodt Chemical Works. Electrical measurements were employed to characterize the oxides produced by various processes from different starting materials. The basic objective of the program was to determine those factors which affect the sintering characteristics of uranium dioxide."
Date: September 25, 1956
Creator: Willardson, Robert K.; Moody, Jerry W. & Goering, Harvey L.
Partner: UNT Libraries Government Documents Department
open access

A Study of the Feasibility of a Tracer System for Locating a Fuel-Element Failure in Reactors

Description: Report discussing a study that investigates the use of small amounts of tracer elements placed in the fuel alloy of subassemblies in order to locate fuel-element failure. Details of experimental methods and materials are included as well as data that leads to the suggestion of further investigation.
Date: November 2, 1956
Creator: Pobereskin, Meyer; Sunderman, Duane Neuman; Eldridge, Aaron; Calkins, George D.; Chubb, Walston; Rough, Frank A. et al.
Partner: UNT Libraries Government Documents Department
open access

Aqueous Corrosion of Uranium Fuel-Element Cores Containing 0 to 20 w/o Zirconium

Description: Abstract: A description is given of the design and operation of a windowed autoclave system employed in the study of corrosion by pressurized hot water. The device has been used to obtain time-lapse motion pictures of the swelling and rupture of deliberately defected zirconium-clad uranium specimens. A method is described by which corrosion rates were calculated from pressure and temperature measurements. A typical set of pictures taken during a test is presented, and corrosion rates are report… more
Date: January 7, 1957
Creator: Grieser, Daniel R. & Simons, Eugene M.
Partner: UNT Libraries Government Documents Department
open access

Characterization of Inclusion in Dingot Uranium

Description: Abstract: The nonmetallic inclusions in both as-reduced and fabricated dingot uranium have been studied for comparison with those in ingot uranium. Special attention was paid to the hydride for the purpose of determining the amount and distribution in the various types of uranium. The types and distribution of other inclusions were also studied. It was found that the dingot uranium was of a higher quality than ingot uranium and was comparable to as-reduced derby uranium on the basis of over-all… more
Date: January 11, 1957
Creator: Cheney, Donald M. & Dickerson, Ronald F.
Partner: UNT Libraries Government Documents Department
open access

Fabrication of Dispersed Uranium Fuel Elements Using Powder-Metallurgy Techniques

Description: Abstract: "Fabrication techniques for producing dispersion fuel elements with cores of 30 volume per cost of UC, U2Tl, U3Si, or U6Ni dispersed in Zircology 2 and 30 volume per cent of UC or UN dispersed in Type 18-8 stainless steel have been investigated. Roll-clad plate-type elements of all these compositions may be fabricated by powder-metallurgy methods in such a manner that good core-to-cladding bonds and cores with uniform dispersions of discrete uranium-composed particles are obtained. Fr… more
Date: May 6, 1957
Creator: Paprocki, Stan J.; Keller, Donald L. & Cunningham, G. W.
Partner: UNT Libraries Government Documents Department
open access

A Tracer Study of the Transport of Chromium in Fluoride Fuel Systems

Description: The following report follows an experimental study that was made on the mass transport of chromium in polythermal inconel-fluoride fuel systems, followed by the technique of adding radioactive chromium-51 to the system as either CrF3 in the salt or as elemental chromium in the solid phase.
Date: June 18, 1957
Creator: Price, Robert B.; Sunderman, Duane Neuman; Pobereskin, Meyer & Calkins, George D.
Partner: UNT Libraries Government Documents Department
open access

Examination of Factors Affecting the Quality of Vacuum Induction-Melted Uranium

Description: The following report examines primarily water and air factors that affect the quality of vacuum induction-melted uranium, yet follows experiments with other factors such as graphite and zirconium crucibles under dry and wet conditions, usage of hydrogen, oxygen, CO and other subject admitted to determine pressure-time relationships and residual gas compositions, as well as a study of water-gas reaction within the furnace.
Date: July 3, 1958
Creator: Endebrock, Roy W.; Foster, Ellis L. & Dickerson, Ronald F.
Partner: UNT Libraries Government Documents Department
open access

Examination of Factors Affecting the Quality of Vacuum Induction-Melted Uranium

Description: The following report examines primarily water and air factors that affect the quality of vacuum induction-melted uranium, yet follows experiments with other factors such as graphite and zirconium crucibles under dry and wet conditions, usage of hydrogen, oxygen, CO and other subject admitted to determine pressure-time relationships and residual gas compositions, as well as a study of water-gas reaction within the furnace.
Date: July 3, 1958
Creator: Endebrock, Roy W.; Foster, Ellis L. & Dickerson, Ronald F.
Partner: UNT Libraries Government Documents Department
open access

Theoretical Studies of the Solidification of Uranium Castings

Description: Report discussing a method of evaluating factors relevant to the creation of sound uranium castings. From abstract: "A mathematical model has been developed to calculate the time-temperature relationships in a cylindrical uranium casting during its solidification. Finite-difference equations are used, and the solution is obtained by use of a digital computer."
Date: July 11, 1958
Creator: Fletcher, Billie L.; Foster, Ellis L., Jr.; Franklin, Charles K.; Lechler, Andrew; Schwartz, Benjamin L. & Dickerson, Ronald F.
Partner: UNT Libraries Government Documents Department
open access

Properties of Arc-Melted Chromium-Base Alloys

Description: From abstract: "Twelve binary chromium-base alloy systems were screened for hot workability, oxidation resistance, and hot strength using small ore-melted ingots...Experiments with the preparation of large chromium-base alloy ingots showed that cold-mold ore melting was not suitable for preparing ingots containing over about 1 w/o of alloy addition."
Date: July 14, 1958
Creator: Maykuth, Daniel J.; Roberts, John W., Jr. & Jaffee, Robert Isaac, 1917-
Partner: UNT Libraries Government Documents Department
open access

Development of Cermet Fuel Elements

Description: Abstract: "Fabrication techniques for making metal-ceramic fuel elements containing 60 to 90 volume per cent of UN or UO2 in a Type 302B stainless steel matrix was investigated. A hot press-forging procedure was most successful for fabricating fuel cores with a density of 90 per cent of theoretical or better. This procedure consisted of sealing the cold-pressed core compacts in stainless steel picture-frame packs, heating to 1900 F, and pressing to a total reduction in thickness of 35 per cent.… more
Date: August 11, 1958
Creator: Paprocki, Stan J.; Keller, Donald L.; Cunningham, G. W. & Kizer, Donald E.
Partner: UNT Libraries Government Documents Department
open access

Uranium recovery from a low-grade Katanga sulfide concentrate : topical report

Description: A report which describes a variety of methods for processing a low-grade sulfide concentrate from the Congo. This concentrate consists primarily of sulfides of cobalt, nickel, and iron, plus about 10 percent uranium, present principally as uraninite.
Date: 1953
Creator: Bearse, A. E.; Ewing, R. A.; Sclar, C. B. & Pobereskin, M.
Partner: UNT Libraries Government Documents Department
open access

Hazards Summary Report for the Battelle Research Reactor

Description: From summary: "This report was prepared for the Advisory Committee on Reactor Safeguards for their review and consideration of the potential hazards concerning the Battelle Memorial Institute Research Reactor."
Date: April 4, 1955
Creator: Chastain, J. W.; Redmond, R. F.; Klickman, A.; Anno, J. & Fawcett, S. L.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen