20 Matching Results

Search Results

ASCI Program 4Q FY-99-Quarterly Progress Report (Unclassified Projects)

Description: PSE is made up of four technical areas, ASCI Simulation Development Environment (ASDE), Data Exploration and Management (DEM), Data Transfer and Storage (DTS), and Distributed Systems (DS). The goal of ASDE is to create a truly scalable simulation development environment across ASCI platforms. Specific objectives are to improve the environment to accelerate application development, to improve reliability of codes, and to enable better scalable performance. DEM's effort is to provide an interactive environment for efficiently and visualizing massive amounts of data. WE are working to help scientists spend more time concentrating on data understanding by providing tools that both enhance interactions and minimize unnecessary manipulations of data. The goal of DTS is to provide multiple gigabytes/sec parallel data transfer, multiple petabytes of archival mass storage, and new architectures for ''end-to-end'' I/O all helping to ensure the highest utilization of ASCI resources. DS consists of secure networking, secure distributed computing, and resource management for ASCI platforms. These three research and development activities are fundamental to the creation of the basic infrastructure for the ASCI computing environment.
Date: November 1, 1999
Creator: Pierce, R. & Christensen, R.
Partner: UNT Libraries Government Documents Department

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Description: FIU-HCET participated in an ICT meeting at Mound during the second week of December and presented a brief videotape of the testing of the Robotic Climber technology. During this meeting, FIU-HCET proposed the TechXtract technology for possible testing at Mound and agreed to develop a five-page proposal for review by team members. FIU-HCET provided assistance to Bartlett Inc. and General Lasertronics Corporation in developing a proposal for a Program Opportunity Notice (PON). The proposal was submitted by these companies on January 5, 1999. The search for new equipment dismantlement technologies is continuing. The following vendors have responded to requests for demonstration: LUMONICS, Laser Solutions technology; CRYO-BEAM, Cryogenic cutting technology; Waterjet Technology Association, Waterjet Cutting technology; and DIAJET, Waterjet Cutting technology. Based on the tasks done in FY98, FIU-HCET is working closely with Numatec Hanford Corporation (NHC) and Pacific Northwest National Laboratory (PNNL) to revise the plan and scope of work of the pipeline plugging project in FY99, which involves activities of lab-scale flow loop experiments and a large-scale demonstration test bed.
Date: January 1999
Creator: Ebadian, M. A.
Partner: UNT Libraries Government Documents Department

Strategic Nuclear Research Collaboration - FY99 Annual Report

Description: The Idaho National Engineering and Environmental Laboratory (INEEL) has created the Strategic Nuclear Research Collaboration. The SNRC brings together some of America's finest laboratory and university nuclear researchers in a carefully focused research program intended to produce ''breakthrough'' solutions to the difficult issues of nuclear economics, safety, non-proliferation, and nuclear waste. This integrated program aims to address obstacles that stand in the way of nuclear power development in the US These include fuel cycle concerns related to waste and proliferation, the need for more efficient regulatory practices, and the high cost of constructing and operating nuclear power plants. Funded at an FY99 level of $2.58M, the SNRC is focusing the efforts of scientists and engineers from the INEEL and the Massachusetts Institute of Technology to solve complex nuclear energy challenges in a carefully chosen, integrated portfolio of research topics. The result of this collaboration will be research that serves as a catalyst for future direct-funded nuclear research and technology development and which preserves and enhances the INEEL's role as America's leading national laboratory for nuclear power research. In its first year, the SNRC has focused on four research projects each of which address one or more of the four issues facing further nuclear power development (economics, safety, waste disposition and proliferation-resistance). This Annual Report describes technical work and accomplishments during the first year of the SNRC's existence.
Date: July 1, 1999
Creator: Leahy, T. J.
Partner: UNT Libraries Government Documents Department

Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-99 Status Report

Description: The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1999, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed on radionuclide leaching, microbial degradation, waste neutralization, and a small mockup for grouting the INTEC underground storage tank residual heels.
Date: September 30, 1999
Creator: Herbst, A. K.; McCray, J. A.; Kirkham, R. J.; Pao, J. & Hinckley, S. H.
Partner: UNT Libraries Government Documents Department

Hanford fire department FY 99 annual work plan WBS 6.5.7

Description: The mission of the Hanford Fire Department (HFD) is to support the safe and timely cleanup of the Hanford site by providing a full range of services at the lowest possible cost to customers. These services include fire suppression, fire prevention, emergency rescue, emergency medical service, and hazardous materials response; and to be capable of dealing with and terminating emergency situations which could threaten the operations, employees, the general public, or interest of the U. S. Department of Energy operated Hanford Site. This includes response to surrounding fire departments/districts under mutual aid and state mobilization agreements and fire fighting, hazardous materials, and ambulance support to Washington Public Power Supply System (Supply System) and various commercial entities operating on site through Requests for Service from DOE-RL. The fire department also provides site fire marshal overview authority, fire system testing and maintenance, respiratory protection services, building tours and inspections, ignitable and reactive waste site inspections, prefire planning, and employee fire prevention education.
Date: February 24, 1999
Creator: GOOD, D.E.
Partner: UNT Libraries Government Documents Department

Hanford Site Environment Safety and Health (ES and H) FY 1999 and FY 2000 Execution Commitment Summary

Description: All sites in the U.S. Department of Energy (DOE) Complex prepare this report annually for the DOE Office of Environment, Safety and Health (EH). The purpose of this report is to provide a summary of the previous and current year's Environment, Safety and Health (ES&H) execution commitments and the S&H resources that support these activities. The fiscal year (FY) 1999 and 2000 information (Sieracki 1999) and data contained in the ''Hanford Site Environment, Safety and Health Fiscal Year 2001 Budget-Risk Management Summary'' (RL 1999) were the basis for preparing this report. Fiscal year 2000 finding of Office of Environmental Management (EM) and Office of Nuclear Energy, Science and Technology (NE) activities is based on the President's budget of $1,065.1 million and $28.0 million, plus $2.7 million carryover finding, respectively, as of October 31, 1999. Any funding changes as a result of the Congressional appropriation process will be reflected in the Fiscal Year 2002 ES&H Budget-Risk Management Summary to be issued in May 2000. This report provides the end-of-year status of FY 1999 ES&H execution commitments, including actual S&H expenditures, and describes planned FY 2000 ES&H execution commitments and the S&H resources needed to support those activities. This requirement is included in the ES&H ''Guidance for FY200l Budget Formulations and Execution'' (DOE 1999).
Date: December 1, 1999
Creator: Reep, I. E.
Partner: UNT Libraries Government Documents Department

Appropriations for FY1999: Commerce, Justice, and State, the Judiciary, and Related Agencies

Description: Appropriations are one part of a complex federal budget process that includes budget resolutions, appropriations (regular, supplemental, and continuing) bills, rescissions, and budget reconciliation bills. This report is a guide to CRS reports that provide analytical perspectives on the 13 annual appropriations bills, and other related appropriation measures. It does not include a detailed explanation or description of the budget or appropriations processes. It is designed to supplement the information provided by the House and Senate Appropriations Subcommittees on Treasury, Postal Service, Executive Office of the President, and General Government.
Date: May 24, 1999
Creator: Knight, Edward
Partner: UNT Libraries Government Documents Department

Appropriations for FY1999: Legislative Branch

Description: Appropriations are one part of a complex federal budget process that includes budget resolutions, appropriations (regular, supplemental, and continuing) bills, rescissions, and budget reconciliation bills. This report is a guide to one of the 13 regular appropriations bills that Congress passes each year. It is designed to supplement the information provided by the House and Senate Appropriations Subcommittees on Legislative Branch Appropriations.
Date: March 11, 1999
Creator: Dwyer, Paul E
Partner: UNT Libraries Government Documents Department

FY99 Status Report on the HSV

Description: 'The HSV in storage in MTF has been monitored during FY99, and its overpressure has been sampled and analyzed. The HSV''s internal pressure continues to rise slowly, and the overpressure still analyzes as 100 percent 3He. The titanium tritide sample that was to be monitored annually and which had developed a leak last year has been repaired and isotherms measured. Unfortunately the sample was showing significant unexpected 3He release, so the isotherm data is corrupted by unknown levels of 3He. This release has disqualified this sample for future use, as it is now seriously divergent from the HSV material. A different sample must be selected for subsequent studies.The unexpected 3He releases of the Ti-3 sample and the possible release in other Ti samples have raised a serious issue. It should be determined why this release is occurring, so that an unexpected release of 3He during HSV unloading can be assessed as unlikely.'
Date: October 15, 1999
Creator: Shanahan, K. L.
Partner: UNT Libraries Government Documents Department

FY99 Status Report on the HSV

Description: 'The HSV in storage in MTF has been monitored during FY99, and its overpressure has been sampled and analyzed. The HSV''s internal pressure continues to rise slowly, and the overpressure still analyzes as 100 percent 3He. The titanium tritide sample that was to be monitored annually and which had developed a leak last year has been repaired and isotherms measured. Unfortunately the sample was showing significant unexpected 3He release, so the isotherm data is corrupted by unknown levels of 3He. This release has disqualified this sample for future use, as it is now seriously divergent from the HSV material. A different sample must be selected for subsequent studies.The unexpected 3He releases of the Ti-3 sample and the possible release in other Ti samples have raised a serious issue. It should be determined why this release is occurring, so that an unexpected release of 3He during HSV unloading can be assessed as unlikely.'
Date: October 15, 1999
Creator: Shanahan, K. L.
Partner: UNT Libraries Government Documents Department

FY'99 final report for the expedited technology demonstration project: demonstration test results for the MSO/off-gas and salt recycle system

Description: Molten Salt Oxidation (MSO) is a promising alternative to incineration for the treatment of a variety of organic wastes. Lawrence Livermore National Laboratory (LLNL) has prepared a facility in which an integrated pilot-scale MSO treatment system is being tested and demonstrated. The system consists of a MSO vessel with a dedicated off-gas treatment system, a salt recycle system, feed preparation equipment, and a ceramic final waste forms immobilization system. This integrated system was designed and engineered based on operational experience with an engineering-scale reactor unit and extensive laboratory development on salt recycle and final forms preparation. The MSO/off-gas system has been operational since December 1997. The salt recycle system and the ceramic final forms immobilization became operational in May 1998. In FY98, we have tested the MSO facility with various organic feeds, including chlorinated solvents, tributyl phosphate/kerosene, PCB-contaminated waste oils and solvents, booties, plastic pellets, ion exchange resins, activated carbon, radioactive-spiked organics, and well-characterized low-level liquid mixed wastes. MSO is shown to be a versatile technology for hazardous waste treatment and may be a solution to many waste disposal problems in DOE sites. The results of the demonstration conducted in FY98 has been reported [1]. In FY99 (October 1998 to April 1999) we conducted further testing in the MSO/off-gas system with ion exchange resins, two real waste specimens, activated carbon, and TNT-loaded activated carbon, both at regular feed rates and higher feed rates up to a superficial gas velocity of 1.75 ft/s. We also drained the salt three times (SR7, SR8, SR9) in FY99 and sent the spent salts to the salt recycle system for further processing. This report presents the results obtained from the demonstration of the MSO/off-gas system and the salt recycle system from October 1998 to April 1999. We then shut down the operation and cleaned the ...
Date: May 1, 1999
Creator: Adamson, M G & Hsu, P C
Partner: UNT Libraries Government Documents Department

RF cavity R&D at LBNL for the NLC damping rings, FY1999

Description: This report contains a summary of the R&D activities at LBNL on RF cavities for the NLC damping rings during fiscal year19999. These activities include the optimization of the RF design for both efficiency and damping of higher-order (HOMs), by systematic study of the cavity profile, the effect of the beam pipe diameter, nosecone angle and gap, the cross section and position of the HOM damping waveguides and the coupler. The effect of the shape of the HOM waveguides and their intersection with the cavity wall on the local surface heating is also an important factor, since it determines the highest stresses in the cavity body. This was taken into account during the optimization so that the stresses could be reduced at the same time as the HOP damping was improved over previous designs. A new method of calculating the RF heating was employed, using a recently released high frequency electromagnetic element in ANSYS. This greatly facilitates the thermal and stress analysis of the design and fabrication methods have been developed with the goals of lower stresses, fewer parts and simpler assembly compared to previous designs. This should result in substantial cost savings. Preliminary designs are described for the cavity ancillary components including the RF window, HOM loads, and tuners. A preliminary manufacturing plan is included, with an initial estimate of the resource requirements. Other cavity options are discussed which might be desirable to either lower the R/Q, for reduced transient response, or lower the residual HOM impedance to reduce coupled-bunch growth rates further still.
Date: November 1, 1999
Creator: Rimmer, R.A.; Corlett, J.N.; Koehler, G.; Li, D.; Hartman, N.; Rasson, J. et al.
Partner: UNT Libraries Government Documents Department

[Project Summary: Social and Economic Consequences of Onshore OCS Related Activities in Coastal Alabama]

Description: Summary describing the work completed at Foster Associates, Inc. for the Social and Economic Consequences of Onshore OCS Related Activities in Coastal Alabama. It includes background information on the project funding and sponsorship, goals, methodology, and findings.
Date: April 1999
Creator: Foster Associates, Inc.
Partner: UNT Libraries Government Documents Department

Budget FY1999: A Chronology with Internet Access

Description: This is a select chronology of, and a finding guide for information on, congressional and presidential actions and documents related to major budget events in calendar year 1998, covering the FY1999 budget. Brief information is provided for the President’s budget, congressional budget resolutions, appropriations measures (regular, continuing, supplementals, and rescissions), budget reconciliation, House and Senate votes, line-item vetoes, publications, testimony, charts, and tables.
Date: January 4, 1999
Creator: Bley, Mary Frances
Partner: UNT Libraries Government Documents Department

Appropriations for FY1999: An Overview

Description: Appropriations are one part of a complex federal budget process that includes budget resolutions, appropriations (regular, supplemental, and continuing) bills, rescissions, and budget reconciliation bills. This report is a guide to CRS reports that provide analytical perspectives on the 13 annual appropriations bills, and other related appropriation measures. It does not include a detailed explanation or description of the budget or appropriations processes.
Date: April 28, 1999
Creator: Anderson, J. Michael
Partner: UNT Libraries Government Documents Department

WASTE PACKAGE OPERATIONS FY99 CLOSURE METHODS REPORT

Description: The waste package (WP) closure weld development task is part of a larger engineering development program to develop waste package designs. The purpose of the larger waste package engineering development program is to develop nuclear waste package fabrication and closure methods that the Nuclear Regulatory Commission will find acceptable and will license for disposal of spent nuclear fuel (SNF), non-fuel components, and vitrified high-level waste within a Monitored Geologic Repository (MGR). Within the WP closure development program are several major development tasks, which, in turn, are divided into subtasks. The major tasks include: WP fabrication development, WP closure weld development, nondestructive examination (NDE) development, and remote in-service inspection development. The purpose of this report is to present the objectives, technical information, and work scope relating to the WP closure weld development.and NDE tasks and subtasks and to report results of the closure weld and NDE development programs for fiscal year 1999 (FY-99). The objective of the FY-99 WP closure weld development task was to develop requirements for closure weld surface and volumetric NDE performance demonstrations, investigate alternative NDE inspection techniques, and develop specifications for welding, NDE, and handling system integration. In addition, objectives included fabricating several flat plate mock-ups that could be used for NDE development, stress relief peening, corrosion testing, and residual stress testing.
Date: September 23, 1999
Creator: Knapp, M. C.
Partner: UNT Libraries Government Documents Department

Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-99 Status Report

Description: The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1999, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed on radionuclide leaching, microbial degradation, waste neutralization, and a small mockup for grouting the INTEC underground storage tank residual heels.
Date: October 1, 1999
Creator: Herbst, Alan Keith; Mc Cray, John Alan; Kirkham, Robert John; Pao, Jenn Hai & Hinckley, Steve Harold
Partner: UNT Libraries Government Documents Department

Tanks Focus Area (TFA) FY1999 Midyear Review Report

Description: The purpose of the Tanks Focus Area (TFA) Midyear Review was to improve the quality and responsiveness of TFA technical solutions to identified user needs. This review goal was achieved through executing a multi-phased review approach. The first phase of the midyear review focused on the subset of FY99 work identified by Department of energy users as having continuing benefit in FY00-01. The TFA FY00-02 Technical Responses identified FY99 work that had continued applicability based on the most current set of site user needs. Each TFA FY00-02 Technical Response which included FY work scope was reviewed by the TFA Technical Advisory Group (TAG), in a meeting held in February 1999. Made up of technical experts from across the country, the TAG provides high-quality, short-turnaround, independent technical reviews for the TFA.
Date: May 26, 1999
Creator: Schlahta, Stephan N.
Partner: UNT Libraries Government Documents Department

Progress report of FY 1999 activities: Continued development of an integrated sounding system in support of the DOE/ARM experimental program

Description: Both during September 15-30, 1996 and September 15-October 5, 1997, the Environmental Technology Laboratory (ETL) participated in experiments at the Southern Great Plains (SGP) Cloud and Radiation Testbed (CART) site that was designed to study many of the ways that ARM is measuring water vapor. Because of some inconsistencies between ETL and ARM Microwave radiometers (MWR) during these experiments, called the Water Vapor Intensive Operating Periods (WVIOPs), we applied to both sets of data a newly developed correction algorithm for tipping curve calibration. We found that this algorithm reduces the differences between the radiometers, there are still some unexplained features of scanning ARM MWR data. Measurements of water vapor at the North Slope of Alaska and Adjacent Arctic Ocean (NSA/AAO) CART site in Barrow, Alaska, area potential problem because of the difficulty of radiosondes to measure low amounts of vapor during cold and extremely dry conditions. The applicability of MWR scaling to radiosondes is questionable because of the low sensitivity of these instrument during dry conditions. It has been suggested by the ARM Instantaneous Radiative Flux Working Group and others that measurements of brightness temperature around 183 GHz could be used to scale radiosondes during the coldest and driest periods. However, the millimeter wavelengths are vulnerable to cloud effects from both liquid and ice. During March 1999, we participated in the joint NASA/NOAA Millimeter wave Arctic Experiment to evaluate microwave and millimeter wave radiometers during extremely cold conditions. ETL tested, both in an experiment at the Boulder Atmospheric Observatory and during the two Water Vapor Intensive Operating Periods in 1996 and 1997, a 5-mm scanning radiometer that measures low-altitude temperature profiles; both profiles of lapse rate and absolute temperature can be measured with the instrument. Results of these tests were published in the open literature. In addition, the ETL scanning ...
Date: September 8, 1999
Creator: Westwater, Edgeworth R.; Han, Yong & Leuskiy, Vladimir
Partner: UNT Libraries Government Documents Department

Progress report of FY 1999 activities: The application of Kalman filtering to derive water vapor profiles from combined ground-based sensors: Raman lidar, microwave radiometers, GPS, and radiosondes

Description: Previously, the proposers have delivered to ARM a documented algorithm, that is now applied operationally, and which derives water vapor profiles from combined remote sensor measurements of water vapor radiometers, cloud-base ceilometers, and radio acoustic sounding systems (RASS). With the expanded deployment of a Raman lidar at the CART Central Facility, high quality, high vertical-resolution, water vapor profiles will be provided during nighttime clear conditions, and during clear daytime conditions, to somewhat lower altitudes. The object of this effort is to use Kalman Filtering, previously applied to the combination of nighttime Raman lidar and microwave radiometer data, to derive high-quality water vapor profiles, during non-precipitating conditions, from data routinely available at the CART site. Input data to the algorithm would include: Raman lidar data, highly quality-controlled data of integrated moisture from microwave radiometers and GPS, RASS, and radiosondes. While analyzing data obtained during the Water Vapor Intensive Operating Period'97 at the SGP CART site in central Oklahoma, several questions arose about the calibration of the ARM microwave radiometers (MWR). A large portion of this years effort was a thorough analysis of the many factors that are important for the calibration of this instrument through the tip calibration method and the development of algorithms to correct this procedure. An open literature publication describing this analysis has been accepted.
Date: September 10, 1999
Creator: Westwater, Edgeworth R. & Han, Yong
Partner: UNT Libraries Government Documents Department