2,140 Matching Results

Search Results

Advanced search parameters have been applied.

Analysis of Electric Energy Usage in Air Force Houses Equipped with Air-to-Air Heat Pumps

Description: From Introduction: "One part of this study, which is presented in this Monograph, consists of an analysis of electric energy usage and electric power demand data obtained from a sample group of occupied houses at Little Rock Air Force Base in Arkansas, equipped with heat pumps, water heaters, cooking ranges, clothes dryers, and miscellaneous appliances all operated by electricity."
Date: July 13, 1962
Creator: Archenbach, Paul R.; Davis, Joseph C. & Smith, William T.
Partner: UNT Libraries Government Documents Department

Research on Thermoelectric Heat Pumps

Description: From Results: "Prior to stating results achieved, let us first discuss the measurements we were able to make, and how these measurements might--or might not--be indicative of the objective we strove to reach. Tables I and II, and related Figs. 11 and 12, show the best results obtained. Final Columns of Tables I and II are believed to show, at least to a degree, how good or how poor our best sputtered films turned out to be, compared with top-quality Peliter semiconductor materials."
Date: November 1963
Creator: Cox, E. F.
Partner: UNT Libraries Government Documents Department

Research on Pumping Unit Studies: Final Evaluation Report

Description: From Introduction and Purpose of Studies: "The Bureau of Reclamation was engaged to administer contracts with pump manufactures to supply data on large pumping units capable of withstanding aerated sea water and the hot brine solutions to be encountered in such plants. The data, as evaluated in this report, are to be made available to 15 or more architect-engineers who have been engaged to prepare conceptual designs of the treatment plants."
Date: September 1966
Creator: United States. Bureau of Reclamation. Office of Chief Engineer.
Partner: UNT Libraries Government Documents Department

Pumps

Description: Pair of metallic leather pumps. Shoes of textured pink or rose metallic hue with silver undertones, edged in black velvet on vamp and around peep-toe. Slingback, fastened by black rhinestone-accented buckles. 3 1/4" spike/stiletto heels covered in the same leather. Each shoe marked inside vamp: "4 1/2 M 4311-SLW / 26080". Stamped on left shoe: "Herbert Levine / Fine Shoes"; Stamped on right shoe: "Neiman-Marcus". Stamped on both "Hand / Lasted".
Date: 1950/1959
Creator: Levine, Beth Katz
Partner: UNT College of Visual Arts + Design

D'Orsay Pumps

Description: Pair of brown suede D'Orsay Pumps. The shoes have brown suede rounded toe box and heel area, but are open at sides to the sole. Small inverted V cut at front creating "peep-toe" effect. On top of vamp is sewn on brown suede "tie" forming the effect of a bow. Brown suede ankle strap. Thick 3 1/2" high spike heel covered in brown suede. Marked inside heel of both shoes: "17061-1 / 6 S / 11310X"; Stamped on sole of both shoes: "Pandora / Footwear" The D'Orsay Pumps style of shoes is named after Count d'Orsay, a 19th century leader of French Society.
Date: 1949
Creator: Pandora Footwear
Partner: UNT College of Visual Arts + Design

Pumps

Description: Pair of deep wine red leather pumps. Shoes have a V-throat on vamp and are edged with thin bands of taupe leather around vamp and along outside panel ending in a triangular shape. 3 1/2" Continental set-back heel almost a stiletto, but wider and more oval in cross-section. Stamped in each shoe: "Charles Jourdan / Paris" and "Orient". Stamped inside each heel: "39 B / 63586 E". Stamped on sole: "Leather / Leder / Cuir / Made in / France"
Date: 1970/1983
Creator: Jourdan, Charles, 1883-1976
Partner: UNT College of Visual Arts + Design

Evening Pumps

Description: Pair of reddish-pink or coral silk satin evening pumps. Square toe shoes which have a large open area on the vamp which is backed by clear plastic and edged by braid. The plastic is overlaid with a metal net or chain mail with rhinestones at the intersections. 2 1/4" square heel covered with same material. Lined in off-white/gray leather. Stamped inside each shoe: "Made in Italy / Espressly / For / Lou Lattimore" (Espressly rather than Expressly); and "Creation Mancini / Paris / Waltea made in Italy" Stamped on sole of each shoe: "8"
Date: 1960
Creator: Creation Mancini
Partner: UNT College of Visual Arts + Design

General Engineering and Consulting Laboratory "Hot Service" Turbine Pump: Progress Report [for] Period May 1 to June 15, 1948

Description: Introduction: "This report covers progress on the testing of the General Engineering and Consulting Laboratories Turbine Pump No. 1 from May 1, 1948 to Jun 15, 1948. All testing prior to April 30, 1948 has been described in Redox Experiment Testing Report No. 1 (Document HW-9474) and No. 2 (Document HW-9694)."
Date: June 21, 1948
Creator: Stringer, J. T. & Allen, A. W.
Partner: UNT Libraries Government Documents Department

Performance of a vane driven-gear pump

Description: Given here are the results of a test conducted in a wind tunnel on the performance of a vane-driven gear pump used to pump gasoline upward into a small tank located within the upper wing from which it flows by gravity to the engine carburetor. Information is given on the efficiency of the pump, the head resistance of the vanes, the performance and characteristics of the unit with and without housing about the vanes, the pump performance when motor driven, and resistance and power characteristics.
Date: September 1921
Creator: Heald, R. H.
Partner: UNT Libraries Government Documents Department

Electromagnetic Flowmeter

Description: The following report documents progress the development of an electromagnetic flowmeter that measures the flow of half alloy, covering the period for March 1 to November 30, 1947.
Date: 1952
Creator: Barnes, A. H.; Whitham, G. K. & Smith, F. A.
Partner: UNT Libraries Government Documents Department

Ground Source Integrated Heat Pump (GS-IHP) Development

Description: Between October 2008 and May 2013 ORNL and ClimateMaster, Inc. (CM) engaged in a Cooperative Research and Development Agreement (CRADA) to develop a groundsource integrated heat pump (GS-IHP) system for the US residential market. A initial prototype was designed and fabricated, lab-tested, and modeled in TRNSYS (SOLAR Energy Laboratory, et al, 2010) to predict annual performance relative to 1) a baseline suite of equipment meeting minimum efficiency standards in effect in 2006 (combination of air-source heat pump (ASHP) and resistance water heater) and 2) a state-of-the-art (SOA) two-capacity ground-source heat pump with desuperheater water heater (WH) option (GSHPwDS). Predicted total annual energy savings, while providing space conditioning and water heating for a 2600 ft{sup 2} (242 m{sup 2}) house at 5 U.S. locations, ranged from 52 to 59%, averaging 55%, relative to the minimum efficiency suite. Predicted energy use for water heating was reduced 68 to 78% relative to resistance WH. Predicted total annual savings for the GSHPwDS relative to the same baseline averaged 22.6% with water heating energy use reduced by 10 to 30% from desuperheater contributions. The 1st generation (or alpha) prototype design for the GS-IHP was finalized in 2010 and field test samples were fabricated for testing by CM and by ORNL. Two of the alpha units were installed in 3700 ft{sup 2} (345 m{sup 2}) houses at the ZEBRAlliance site in Oak Ridge and field tested during 2011. Based on the steady-state performance demonstrated by the GS-IHPs it was projected that it would achieve >52% energy savings relative to the minimum efficiency suite at this specific site. A number of operational issues with the alpha units were identified indicating design changes needed to the system before market introduction could be accomplished. These were communicated to CM throughout the field test period. Based on the alpha unit ...
Date: May 24, 2013
Creator: Baxter, V. D.; Rice, K.; Murphy, R.; Munk, J.; Ally, Moonis; Shen, Bo et al.
Partner: UNT Libraries Government Documents Department

Reclamation of Contaminated Diffusion Pump Oil and Removal of Tuballoy Therefrom

Description: Abstract: The possibilities for the removal of tuballoy from diffusion pump oil and reclamation of the oils for reuse are discussed. The report includes specifications of practical equipment, operating instructions, photographs and diagrams of the necessary construction details.
Date: December 6, 1945
Creator: Lee, J. E. Jr. & Susano, C. D.
Partner: UNT Libraries Government Documents Department

Reclamation of Contaminated Kinney and Diffusion Pump Oils and Removal of Uranium Therefrom

Description: Abstract: Test distillations were made with Kinney and diffusion pump oils under vacuum in order to determine accurately the temperature range over which satisfactory distillate may be collected. Also recommendations are made as to the most advisable type of heating equipment necessary to produce the required heat and maintain the desired temperature. In addition, several important refinements in the distillation equipment were checked for operational characteristics and for their efficiency in aiding the production of uranium-free distillates.
Date: March 10, 1947
Creator: Lee, J. E. Jr.; Aikin, L. M. & Susano, C. D.
Partner: UNT Libraries Government Documents Department

Pumps

Description: Pumps of black satin and black kid leather. Vamp with cutwork in leather forming a modified sunray or comet design centered on circular metal button set with rhinestones. The cutwork is embellished with black jet beadwork. Louis XV style heels covered in black satin. Stamped inside one shoe in gold, partly illegible: "Kasson's / Knickerbocker / Cincinnati"
Date: 1920
Partner: UNT College of Visual Arts + Design

Data on Pumping at the Anthracite Mines of Pennsylvania

Description: Report issued by the U.S. Bureau of Mines on the study of pumping at anthracite mines in Pennsylvania. The study was conducted in order to solve anthracite mine-water problems. The report includes maps, photographs, and illustrations.
Date: September 1950
Creator: Ash, S. H. (Simon Harry), b. 1889; Eaton, W. L.; Gilbert, Joseph C.; James, H. M.; Jenkins, Hayden E.; Kennedy, D. O. et al.
Partner: UNT Libraries Government Documents Department

Frequency response of positive-displacement variable stroke fuel pump

Description: From Summary: "The dynamic characteristics of an axial-piston, variable-stroke, jet-engine fuel pump were experimentally determined by frequency-response tests. It was found that the pump can be approximated by a first-order linear system with an average time constant of 0.04 second. The order of magnitude of the lag of the pump is negligible compared with current jet engines. It was also established that such a pump may be used for obtaining sinusoidal fuel pressures of variable frequency and amplitude."
Date: June 1950
Creator: Shames, Harold; Himmel, Seymour C. & Blivas, Darnold
Partner: UNT Libraries Government Documents Department

Direct Current Electromagnetic Pumps

Description: Abstract: "A number of direct current conduction type electromagnetic pumps for liquid metals were constructed. Pumping capacities of over 400 gpm and efficiencies of over 50 percent were obtained. NaK alloy at temperatures up to 400 C was used in the test. The large currents required were obtained from rectifiers or from a homopolar generator constructed for the purpose."
Date: October 25, 1949
Creator: Barnes, A. H.; Smith, F. A. & Whitham, G. K.
Partner: UNT Libraries Government Documents Department

Characterization of a new class of surface micromachined pumps.

Description: This is the latest in a series of LDRD's that we have been conducting with Florida State University/Florida A&M University (FSU/FAMU) under the campus executive program. This research builds on the earlier projects; ''Development of Highly Integrated Magnetically and Electrostatically Actuated Micropumps'' (SAND2003-4674) and ''Development of Magnetically and Electrostatically Driven Surface Micromachined Pumps'' (SAND2002-0704P). In this year's LDRD we designed 2nd generation of surface micromachined (SMM) gear and viscous pumps. Two SUMMiT{trademark} modules full of design variations of these pumps were fabricated and one SwIFT{trademark} module is still in fabrication. The SwIFT{trademark} fabrication process results in a transparent pump housing cover that will enable visualization inside the pumps. Since the SwIFT{trademark} pumps have not been tested as they are still in fabrication, this report will focus on the 2nd generation SUMMiT{trademark} designs. Pump testing (pressure vs. flow) was conducted on several of the SUMMiT{trademark} designs resulting in the first pump curve for this class of SMM pumps. A pump curve was generated for the higher torque 2nd generation gear pump designed by Jason Hendrix of FSU. The pump maximum flow rate at zero head was 6.5 nl/s for a 30V, 30 Hz square wave signal. This level of flow rate would be more than adequate for our typical SMM SUMMiT{trademark} or SwIFT{trademark} channels which have typical volumes on the order of 50 pl.
Date: December 1, 2004
Creator: Galambos, Paul C.
Partner: UNT Libraries Government Documents Department