150 Matching Results

Search Results

Advanced search parameters have been applied.

Compact tokamak reactors. Part 1 (analytic results)

Description: We discuss the possible use of tokamaks for thermonuclear power plants, in particular tokamaks with low aspect ratio and copper toroidal field coils. Three approaches are presented. First we review and summarize the existing literature. Second, using simple analytic estimates, the size of the smallest tokamak to produce an ignited plasma is derived. This steady state energy balance analysis is then extended to determine the smallest tokamak power plant, by including the power required to drive the toroidal field, and considering two extremes of plasma current drive efficiency. The analytic results will be augmented by a numerical calculation which permits arbitrary plasma current drive efficiency; the results of which will be presented in Part II. Third, a scaling from any given reference reactor design to a copper toroidal field coil device is discussed. Throughout the paper the importance of various restrictions is emphasized, in particular plasma current drive efficiency, plasma confinement, plasma safety factor, plasma elongation, plasma beta, neutron wall loading, blanket availability and recirculating electric power. We conclude that the latest published reactor studies, which show little advantage in using low aspect ratio unless remarkably high efficiency plasma current drive and low safety factor are combined, can be reproduced with the analytic model.
Date: September 13, 1996
Creator: Wootton, A. J.; Wiley, J. C.; Edmonds, P. H. & Ross, D. W.
Partner: UNT Libraries Government Documents Department

US assessment of free surface liquid metal divertors -- Design analysis and R and D needs

Description: One of the objectives of the restructured US Fusion Energy Sciences Program is to identify and evaluate new high performance concepts for advanced technology with high neutron wall load capability and attractive safety and environmental features. One promising technology specified by the Advanced Technologies and Materials Working Group is liquid plasma-facing surfaces for divertors. Some of the possible advantages of using liquid surfaces in divertors, relative to conventional solid surface approaches, include higher surface heat flux capability, continuously renewable surfaces, and higher temperature operation. A planning activity has been undertaken to identify the work to be performed over approximately three years to evaluate liquid surface concepts on the basis of such factors as their compatibility with fusion plasmas, high power density handling capabilities, engineering feasibility, lifetime, safety, and R and D requirements. A group, known as the Advanced Liquid Plasma-facing Surface (ALPS) planning group, was organized to prepare a plan for the activities needed to conduct such an evaluation. This paper will summarize the work of the ALPS group including recommendations on specific activities and a tentative schedule.
Date: October 1, 1997
Creator: Mattas, R.F.
Partner: UNT Libraries Government Documents Department

Chamber science and technology key question No.1: liquid walls in MFE and IFE

Description: For some time now people have thought of liquid walls as an attractive solution to the technology problems of high power density plasma configurations for MFE, and as (nearly) essential for the pulsed wall-loading conditions in IFE. A flowing, renewable surface could be eroded, evaporated and even be broken apart with no permanent adverse effects on a structure requiring frequent maintenance and replacement. Alpha particle energy could be removed without conduction through a solid wall and the associated thermal stress and creep failure modes, and the energy could be extracted at high temperatures for efficient energy conversion. If a liquid wall of sufficient depth could be formed, radiation damage and waste disposal issues for solid structures could be significantly ameliorated. All these benefits are indeed possible, if only liquid walls could be made to work. As we will see, there are many issues associated with the successful and attractive implementation of liquid walls.
Date: September 1, 1999
Creator: Moir, R & Morley, N
Partner: UNT Libraries Government Documents Department

Divertor particle exhaust and wall inventory on DIII-D

Description: Many tokamaks achieve optimum plasma performance by achieving low recycling; various wall conditioning techniques including helium glow discharge cleaning (HeGDC) are routinely applied to help achieve low recycling. Many of these techniques allow strong, transient wall pumping, but they may not be effective for long-pulse tokamaks, such as the International Thermonuclear Experimental Reactor (ITER), the Tokamak Physics Experiment (TPX), Tore Supra Continu, and JT-60SU. Continuous particle exhaust using an in-situ pumping scheme may be effective for wall inventory control in such devices. Recent particle balance experiments on the Tore Supra and DIII-D tokamaks demonstrated that the wall particle inventory could be reduced during a given discharge by use of continuous particle exhaust. In this paper the authors report the first results of wall inventory control and good performance with the in-situ DIII-D cryopump, replacing the HeGDC normally applied between discharges.
Date: September 1, 1995
Creator: Maingi, R.; Jackson, G.L.; Mahdavi, M.A.; Schaffer, M.J.; Wade, M.R.; Mioduszewski, P.K. et al.
Partner: UNT Libraries Government Documents Department

Core Fueling and Edge Particle Flux Analysis in Ohmically and Auxiliary Heated NSTX Plasmas

Description: The Boundary Physics program of the National Spherical Torus Experiment (NSTX) is focusing on optimization of the edge power and particle flows in b * 25% L- and H-mode plasmas of t {approx} 0.8 s duration heated by up to 6 MW of high harmonic fast wave and up to 5 MW of neutral beam injection. Particle balance and core fueling efficiencies of low and high field side gas fueling of L-mode homic and NBI heated plasmas have been compared using an analytical zero dimensional particle balance model and measured ion and neutral fluxes. Gas fueling efficiencies are in the range of 0.05-0.20 and do not depend on discharge magnetic configuration, density or poloidal location of the injector. The particle balance modeling indicates that the addition of HFS fueling results in a reversal of the wall loading rate and higher wall inventories. Initial particle source estimates obtained from neutral pressure and spectroscopic measurements indicate that ion flux into the divertor greatly exceeds midplane ion flux from the main plasma, suggesting that the scrape-off cross-field transport plays a minor role in diverted plasmas. Present analysis provides the basis for detailed fluid modeling of core and edge particle flows and particle confinement properties of NSTX plasmas. This research was supported by the U.S. Department of Energy under contracts No. DE-AC02-76CH03073, DE-AC05-00OR22725, and W-7405-ENG-36.
Date: June 12, 2002
Creator: Soukhanovskii, V.A.; Maingi, R.; Raman, R.; Kugel, H.W.; LeBlanc, B.P.; Roquemore, L. et al.
Partner: UNT Libraries Government Documents Department

Comparison of the D-T neutron wall load distributions in several tokamak fusion reactor designs

Description: The distributions of the neutron angular and scalar flux and current around the wall of three proposed tokamak fusion reactor designs are investigated in detail. The calculational method involves a numerical solution of the integral form of the neutron transport equation using a ray tracing process. The wall loading in a circular cross section tokamak and in two non-circular tokamaks, the Princeton Reference Design and the University of Wisconsin UWMAK, are compared for three different plasma source distributions. The variation of the angular neutron flux at different wall points is investigated for each design. Neutron wall load peaking factors are also calculated and compared for each design, and are found to be sensitive to both the wall shape and plasma source. The divertors in the two non-circular designs are studied for neutron streaming losses and for the wall load in those regions. (auth)
Date: December 1, 1975
Creator: Chapin, D.L. & Price, W.G. Jr.
Partner: UNT Libraries Government Documents Department

A Compact Torus Fusion Reactor Utilizing a Continuously Generated Strings of CT's. The CT String Reactor, CTSR.

Description: A fusion reactor is described in which a moving string of mutually repelling compact toruses (alternating helicity, unidirectional Btheta) is generated by repetitive injection using a magnetized coaxial gun driven by continuous gun current with alternating poloidal field. An injected CT relaxes to a minimum magnetic energy equilibrium, moves into a compression cone, and enters a conducting cylinder where the plasma is heated to fusion-producing temperature. The CT then passes into a blanketed region where fusion energy is produced and, on emergence from the fusion region, the CT undergoes controlled expansion in an exit cone where an alternating poloidal field opens the flux surfaces to directly recover the CT magnetic energy as current which is returned to the formation gun. The CT String Reactor (CTSTR) reactor satisfies all the necessary MHD stability requirements and is based on extrapolation of experimentally achieved formation, stability, and plasma confinement. It is supported by extensive 2D, MHD calculations. CTSTR employs minimal external fields supplied by normal conductors, and can produce high fusion power density with uniform wall loading. The geometric simplicity of CTSTR acts to minimize initial and maintenance costs, including periodic replacement of the reactor first wall.
Date: May 30, 2007
Creator: Hartman, C W; Reisman, D B; McLean, H S & Thomas, J
Partner: UNT Libraries Government Documents Department

APEX and ALPS, high power density technology programs in the U.S.

Description: In fiscal year (FY) 1998 two new fusion technology programs were initiated in the US, with the goal of making marked progress in the scientific understanding of technologies and materials required to withstand high plasma heat flux and neutron wall loads. APEX is exploring new and revolutionary concepts that can provide the capability to extract heat efficiently from a system with high neutron and surface heat loads while satisfying all the fusion power technology requirements and achieving maximum reliability, maintainability, safety, and environmental acceptability. ALPS program is evaluating advanced concepts including liquid surface limiters and divertors on the basis of such factors as their compatibility with fusion plasma, high power density handling capabilities, engineering feasibility, lifetime, safety and R and D requirements. The APEX and ALPS are three-year programs to specify requirements and evaluate criteria for revolutionary approaches in first wall, blanket and high heat flux component applications. Conceptual design and analysis of candidate concepts are being performed with the goal of selecting the most promising first wall, blanket and high heat flux component designs that will provide the technical basis for the initiation of a significant R and D effort beginning in FY2001. These programs are also considering opportunities for international collaborations.
Date: February 1, 1999
Creator: Wong, C.; Berk, S.; Abdou, M. & Mattas, R.
Partner: UNT Libraries Government Documents Department

Fusion reactor systems studies. Progress report for the period November 1, 1996--October 31, 1997, and final report

Description: During FY97, the University of Wisconsin Fusion Technology Institute personnel have participated in the ARIES-RS and the ARIES-ST projects. The main areas of effort are: (1) neutronics analysis; (2) shielding of components and personnel; (3) neutron wall loading distribution; (4) radiation damage to in-vessel components; (5) components lifetimes; (6) embrittled materials designs issues; (7) stress and structural analysis; (8) activation, LOCA, and safety analysis; (9) support and fabrication of components; (10) vacuum system; and (11) maintenance. Progress made in these areas are summarized.
Date: August 1, 1997
Creator: El-Guebaly, L.A.; Blanchard, J.P. & Kulcinski, G.L.
Partner: UNT Libraries Government Documents Department

Development path of low aspect ratio tokamak power plants

Description: Recent advances in tokamak physics indicate the spherical tokamak may offer a magnetic fusion development path that can be started with a small size pilot plant and progress smoothly to larger power plants. Full calculations of stability to kink and ballooning modes show the possibility of greater than 50% beta toroidal with the normalized beta as high as 10 and fully aligned 100% bootstrap current. Such beta values coupled with 2--3 T toroidal fields imply a pilot plant about the size of the present DIII-D tokamak could produce {approximately} 800 MW thermal, 160 MW net electric, and would have a ratio of gross electric power over recirculating power (Q{sub PLANT}) of 1.9. The high beta values in the ST mean that E x B shear stabilization of turbulence should be 10 times more effective in the ST than in present tokamaks, implying that the required high quality of confinement needed to support such high beta values will be obtained. The anticipated beta values are so high that the allowable neutron flux at the blanket sets the device size, not the physics constraints. The ST has a favorable size scaling so that at 2--3 times the pilot plant size the Q{sub PLANT} rises to 4--5, an economic range and 4 GW thermal power plants result. Current drive power requirements for 10% of the plasma current are consistent with the plant efficiencies quoted. The unshielded copper centerpost should have an adequate lifetime against nuclear transmutation induced resistance change and the low voltage, high current power supplies needed for the 12 turn TF coil appear reasonable. The favorable size scaling of the ST and the high beta mean that in large sizes, if the copper TF coil is replaced with a superconducting TF coil and a shield, the advanced fuel D-He{sup 3} could ...
Date: March 1, 1997
Creator: Stambaugh, R.D.; Chan, V.S. & Miller, R.L.
Partner: UNT Libraries Government Documents Department

Comparison of wall/divertor deuterium retention and plasma fueling requirements on the DIII-D, TdeV, and ASDEX-upgrade tokamaks

Description: The authors present a comparison of the wall deuterium retention and plasma fueling requirements of three diverted tokamaks, DIII-D, TdeV, and ASDEX-Upgrade, with different fractions of graphite coverage of stainless steel or Inconel outer walls and different heating modes. Data from particle balance experiments on each tokamak demonstrate well-defined differences in wall retention of deuterium gas, even though all three tokamaks have complete graphite coverage of divertor components and all three are routinely boronized. This paper compares the evolution of the change in wall loading and net fueling efficiency for gas during dedicated experiments without Helium Glow Discharge Cleaning on the DIII-D and TdeV tokamaks. On the DIII-D tokamak, it was demonstrated that the wall loading could be increased by > 1,250 Torr-1 (equivalent to 150 {times} plasma particle content) plasma inventories resulting in an increase in fueling efficiency from 0.08 to 0.25, whereas the wall loading on the TdeV tokamak could only be increased by < 35 Torr-{ell} (equivalent to 50{times} plasma particle content) plasma inventories at a maximum fueling efficiency {approximately} 1. Data from the ASDEX-Upgrade tokamak suggests qualitative behavior of wall retention and fueling efficiency similar to DIII-D.
Date: June 1, 1996
Creator: Maingi, R.; Terreault, B. & Haas, G.
Partner: UNT Libraries Government Documents Department

Study of a spherical torus based volumetric neutron source for nuclear technology testing and development. Final report of a scientific research supported by the USDOE/SBIR program

Description: A plasma based, deuterium and tritium (DT) fueled, volumetric 14 MeV neutron source (VNS) has been considered as a possible facility to support the development of the demonstration fusion power reactor (DEMO). It can be used to test and develop necessary fusion blanket and divertor components and provide sufficient database, particularly on the reliability of nuclear components necessary for DEMO. The VNS device complement to ITER by reducing the cost and risk in the development of DEMO. A low cost, scientifically attractive, and technologically feasible volumetric neutron source based on the spherical torus (ST) concept has been conceived. The ST-VNS, which has a major radius of 1.07 m, aspect ratio 1.4, and plasma elongation 3, can produce a neutron wall loading from 0.5 to 5 MW/m{sup 2} at the outboard test section with a modest fusion power level from 38 to 380 MW. It can be used to test necessary nuclear technologies for fusion power reactor and develop fusion core components include divertor, first wall, and power blanket. Using staged operation leading to high neutron wall loading and optimistic availability, a neutron fluence of more than 30 MW-y/m{sup 2} is obtainable within 20 years of operation. This will permit the assessments of lifetime and reliability of promising fusion core components in a reactor relevant environment. A full scale demonstration of power reactor fusion core components is also made possible because of the high neutron wall loading capability. Tritium breeding in such a full scale demonstration can be very useful to ensure the self-sufficiency of fuel cycle for a candidate power blanket concept.
Date: June 1, 1999
Creator: Cheng, E. T.
Partner: UNT Libraries Government Documents Department

Multiplier, moderator, and reflector materials for lithium-vanadium fusion blankets.

Description: The self-cooled lithium-vanadium fusion blanket concept has several attractive operational and environmental features. In this concept, liquid lithium works as the tritium breeder and coolant to alleviate issues of coolant breeder compatibility and reactivity. Vanadium alloy (V-4Cr-4Ti) is used as the structural material because of its superior performance relative to other alloys for this application. However, this concept has poor attenuation characteristics and energy multiplication for the DT neutrons. An advanced self-cooled lithium-vanadium fusion blanket concept has been developed to eliminate these drawbacks while maintaining all the attractive features of the conventional concept. An electrical insulator coating for the coolant channels, spectral shifter (multiplier, and moderator) and reflector were utilized in the blanket design to enhance the blanket performance. In addition, the blanket was designed to have the capability to operate at high loading conditions of 2 MW/m{sup 2} surface heat flux and 10 MW/m{sup 2} neutron wall loading. This paper assesses the spectral shifter and the reflector materials and it defines the technological requirements of this advanced blanket concept.
Date: October 7, 1999
Creator: Gohar, Y. & Smith, D. L.
Partner: UNT Libraries Government Documents Department

A helium-cooled blanket design of the low aspect ratio reactor

Description: An aggressive low aspect ratio scoping fusion reactor design indicated that a 2 GW(e) reactor can have a major radius as small as 2.9 m resulting in a device with competitive cost of electricity at 49 mill/kWh. One of the technology requirements of this design is a high performance high power density first wall and blanket system. A 15 MPa helium-cooled, V-alloy and stagnant LiPb breeder first wall and blanket design was utilized. Due to the low solubility of tritium in LiPb, there is the concern of tritium migration and the formation of V-hydride. To address these issues, a lithium breeder system with high solubility of tritium has been evaluated. Due to the reduction of blanket energy multiplication to 1.2, to maintain a plant Q of > 4, the major radius of the reactor has to be increased to 3.05 m. The inlet helium coolant temperature is raised to 436 C in order to meet the minimum V-alloy temperature limit everywhere in the first wall and blanket system. To enhance the first wall heat transfer, a swirl tape coolant channel design is used. The corresponding increase in friction factor is also taken into consideration. To reduce the coolant system pressure drop, the helium pressure is increased from 15 to 18 MPa. Thermal structural analysis is performed for a simple tube design. With an inside tube diameter of 1 cm and a wall thickness of 1.5 mm, the lithium breeder can remove an average heat flux and neutron wall loading of 2 and 8 MW/m(2), respectively. This reference design can meet all the temperature and material structural design limits, as well as the coolant velocity limits. Maintaining an outlet coolant temperature of 650 C, one can expect a gross closed cycle gas turbine thermal efficiency of 45%. This study further supports ...
Date: March 1, 1998
Creator: Wong, C.P.; Baxi, C.B.; Reis, E.E.; Cerbone, R. & Cheng, E.T.
Partner: UNT Libraries Government Documents Department

EVOLVE - an advanced first wall/blanket system.

Description: A new concept for an advanced fusion first wall and blanket has been identified. The key feature of the concept is the use of the heat of vaporization of lithium (about 10 times higher than water) as the primary means for capturing and removing the fusion power. A reasonable range of boiling temperatures of this alkali metal is 1200 to 1400 C, corresponding with a saturation pressure of 0.035 to 0.2 MPa. Calculations indicate that a evaporative system with Li at {approximately}1200 C can remove a first wall surface heat flux of &gt;2 MW/m2 with an accompanying neutron wall load of &gt;10 MW/m2. Work to date shows that the system provides adequate tritium breeding and shielding, very high thermal conversion efficiency, and low system pressure. Tungsten is used as the structural material, and it is expected to operate at a surface wall load of 2 MW/m2 at temperatures above 1200 C.
Date: July 21, 1999
Creator: Khater, H.; Majumdar, S.; Malang, S.; Mattas, R. F.; Mogahed, E.; Nelson, B. et al.
Partner: UNT Libraries Government Documents Department


Description: OAK-B135 As an element in the US Advanced Power Extraction (APEX) program, they evaluated the design option of using advanced nanocomposite ferritic steel (AFS) as the structural material and Flibe as the tritium breeder and coolant. They selected the recirculating flow configuration as the reference design. Based on the material properties of AFS, they found that the reference design can handle a maximum surface heat flux of 1 MW/m{sup 2}, and a maximum neutron wall loading of 5.4 MW/m{sup 2}, with a gross thermal efficiency of 47%, while meeting all the tritium breeding and structural design requirements. This paper covers the results of the following areas of evaluation: materials selection, first wall and blanket design configuration, materials compatibility, components fabrication, neutronics analysis, thermal hydraulics analysis including MHD effects, structural analysis, molten salt and helium closed cycle power conversion system, and safety and waste disposal of the recirculating coolant design.
Date: November 1, 2003
Partner: UNT Libraries Government Documents Department

About the Toroidal Magnetic Field of a Tokamak Burning Plasma Experiment with Superconducting Coils

Description: In tokamaks, the strong dependence on the toroidal magnetic field of both plasma pressure and energy confinement is what makes possible the construction of small and relatively inexpensive burning plasma experiments using high-field resistive coils. On the other hand, the toroidal magnetic field of tokamaks using superconducting coils is limited by the critical field of superconductivity. In this article, we examine the relative merit of raising the magnetic field of a tokamak plasma by increasing its aspect ratio at a constant value of the peak field in the toroidal magnet. Taking ITER-FEAT as an example, we find that it is possible to reach thermonuclear ignition using an aspect ratio of approximately 4.5 and a toroidal magnetic field of 7.3 T. Under these conditions, fusion power density and neutron wall loading are the same as in ITER [International Thermonuclear Experimental Reactor], but the normalized plasma beta is substantially smaller. Furthermore, such a tokamak would be able to reach an energy gain of approximately 15 even with the deterioration in plasma confinement that is known to occur near the density limit where ITER is forced to operate.
Date: February 20, 2002
Creator: Mazzucato, E.
Partner: UNT Libraries Government Documents Department

Nonsteady heat conduction code with radiation boundary conditions

Description: A heat-transfer model for studying the temperature build-up in graphite blankets for fusion reactors is presented. In essence, the computer code developed is for two-dimensional, nonsteady heat conduction in heterogeneous, anisotropic solids with nonuniform internal heating. Thermal radiation as well as bremsstrahlung radiation boundary conditions are included. Numerical calculations are performed for two design options by varying the wall loading, bremsstrahlung, surface layer thickness and thermal conductivity, blanket dimensions, time step and grid size. (auth)
Date: January 1, 1975
Creator: Fillo, J.A.; Benenati, R. & Powell, J.
Partner: UNT Libraries Government Documents Department

Dust Studies in DIII-D Tokamak

Description: Studies of submicron dust using Mie scattering from Nd:YAG lasers and video data of micron to sub-millimeter sized dust on DIII-D tokamak have provided the first data of dust sources and transport during tokamak discharges. During normal operation on DIII-D dust observation rates are low, a few events per discharge or less. The net carbon content of the dust corresponds to a carbon atom density a few orders of magnitude below the core impurity density. Statistical analysis of Mie data collected over months of operation reveal correlation of increased dust rate with increased heating power and impulsive wall loading due to edge localized modes (ELMs) and disruptions. Generation of significant amounts of dust by disruptions is confirmed by the camera data. However, dust production by disruptions alone is insufficient to account for estimated in-vessel dust inventory in DIII-D. After an extended entry vent, thousands of dust particles are observed by cameras in the first 2-3 plasma discharges. Individual particles moving at velocities up to {approx}300 m/s, breakup of larger particles into pieces, and collisions of particles with walls are observed. After {approx}70 discharges, dust levels are reduced to a few events per discharge. In order to calibrate diagnostics and benchmark modeling, milligram amounts of micron-sized carbon dust have been injected into DIII-D discharges, leading to the core carbon density increase by a factor of 2-3. Following injection, dust trajectories in the divertor are mostly in the toroidal direction, consistent with the ion drag force. Dust from the injection is observed in the outboard midplane by a fast framing camera. The observed trajectories and velocities of the dust particles are in qualitative agreement with modeling by the 3D DustT code.
Date: April 15, 2008
Creator: Rudakov, D L; West, W P; Groth, M; Yu, J H; Boedo, J A; Bray, B D et al.
Partner: UNT Libraries Government Documents Department

Maximum neutron wall loadings in beam-driven tokamak reactors

Description: If a beam-driven D--T tokamak reactor is operated at the maximum density allowed both by pressure limitation and by adequate neutral-beam penetration, the 14-MeV neutron wall loading increases approximately linearly with magnetic field or vertical elongation of the plasma. With elongation = 3, B/sub tmax/ equals 15T, W/sub beam/ = 200 keV, Q approximately 1.0, maximum wall loading is about 5 MW/m$sup 2$. (auth)
Date: January 1, 1976
Creator: Jassby, D.L. & Towner, H.H.
Partner: UNT Libraries Government Documents Department

Wall power measurements of impurity radiation in ORMAK

Description: Time-resolved measurements of the power loss to the ORMAK liner were made using a pyroelectric detector. These measurements indicate that a large, relatively constant fraction (approximately 60 percent) of the electron power input is lost to the liner, rather than to the limiter, over a wide range of input powers (ohmic heating + neutral beam injection) and plasma conditions, and for most of the discharge duration. Most of this energy loss is due to impurity radiation peaked at about a third of the limiter radius and is time-correlated with gross plasma fluctuations, internal disruptions, and related spectroscopic impurity signals.
Date: January 1, 1977
Creator: Bush, C. E. & Lyon, J. F.
Partner: UNT Libraries Government Documents Department

EBT reactor analysis

Description: This report summarizes the results of a recent ELMO Bumpy Torus (EBT) reactor study that includes ring and core plasma properties with consistent treatment of coupled ring-core stability criteria and power balance requirements. The principal finding is that constraints imposed by these coupling and other physics and technology considerations permit a broad operating window for reactor design optimization. Within this operating window, physics and engineering systems analysis and cost sensitivity studies indicate that reactors with &lt;..beta../sub core/&gt; approx. 6 to 10%, P approx. 1200 to 1700 MW(e), wall loading approx. 1.0 to 2.5 MW/m/sup 2/, and recirculating power fraction (including ring-sustaining power and all other reactors auxiliaries) approx. 10 to 15% are possible. A number of concept improvements are also proposed that are found to offer the potential for further improvement of the reactor size and parameters. These include, but are not limited to, the use of: (1) supplementary coils or noncircular mirror coils to improve magnetic geometry and reduce size, (2) energetic ion rings to improve ring power requirements, (3) positive potential to enhance confinement and reduce size, and (4) profile control to improve stability and overall fusion power density.
Date: August 1, 1983
Creator: Uckan, N. A.; Jaeger, E. F.; Santoro, R. T.; Spong, D. A.; Uckan, T.; Owen, L. W. et al.
Partner: UNT Libraries Government Documents Department