8 Matching Results

Search Results

Advanced search parameters have been applied.

Further investigation of the feasibility of the freeze-casting method for forming full-size infiltrated titanium carbide turbine blades

Description: Report presenting an investigation of a method of casting full-size cermet turbine blades from titanium carbide. An extremely thick piece of titanium carbide was prepared with a small amount of binder, cast into a mold by vibration, centrifuged, and frozen to retain the shape of the mold. Densities and radiographs of the blade prior to infiltration were used as criteria for soundness.
Date: October 1956
Creator: Grala, E. M.
Partner: UNT Libraries Government Documents Department

Mechanical Properties at Room Temperature of Four Cermets of Titanium Carbide with Nickel Binder

Description: "Room-temperature stress-strain curves are presented for compression, tension, and shear loadings on four compositions of titanium carbide with nickel binder. Values of ultimate strength, modulus of elasticity, modulus of rigidity, Poisson's ratio in the elastic region, density, and hardness for the four materials are tabulated" (p. 1).
Date: August 1954
Creator: Johnson, Aldie E., Jr.
Partner: UNT Libraries Government Documents Department

Corrosion of Titanium Matrix Composites

Description: The corrosion behavior of unalloyed Ti and titanium matrix composites containing up to 20 vol% of TiC or TiB{sub 2} was determined in deaerated 2 wt% HCl at 50, 70, and 90 degrees C. Corrosion rates were calculated from corrosion currents determined by extrapolation of the tafel slopes. All curves exhibited active-passive behavior but no transpassive region. Corrosion rates for Ti + TiC composites were similar to those for unalloyed Ti except at 90 degrees C where the composites were slightly higher. Corrosion rates for Ti + TiB{sub 2} composites were generally higher than those for unalloyed Ti and increased with higher concentrations of TiB{sub 2}. XRD and SEM-EDS analyses showed that the TiC reinforcement did not react with the Ti matrix during fabrication while the TiB{sub 2} reacted to form a TiB phase.
Date: September 22, 2002
Creator: Covino, B.S., Jr. & Alman, D.E.
Partner: UNT Libraries Government Documents Department

Processing and Characterization of Nickel-Carbon Base Metal Matrix Composites

Description: Carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs) are attractive reinforcements for lightweight and high strength metal matrix composites due to their excellent mechanical and physical properties. The present work is an attempt towards investigating the effect of CNT and GNP reinforcements on the mechanical properties of nickel matrix composites. The CNT/Ni (dry milled) nanocomposites exhibiting a tensile yield strength of 350 MPa (about two times that of SPS processed monolithic nickel ~ 160 MPa) and an elongation to failure ~ 30%. In contrast, CNT/Ni (molecular level mixed) exhibited substantially higher tensile yield strength (~ 690 MPa) but limited ductility with an elongation to failure ~ 8%. The Ni-1vol%GNP (dry milled) nanocomposite exhibited the best balance of properties in terms of strength and ductility. The enhancement in the tensile strength (i.e. 370 MPa) and substantial ductility (~40%) of Ni-1vol%GNP nanocomposites was achieved due to the combined effects of grain refinement, homogeneous dispersion of GNPs in the nickel matrix, and well-bonded Ni-GNP interface, which effectively transfers stress across metal-GNP interface during tensile deformation. A second emphasis of this work was on the detailed 3D microstructural characterization of a new class of Ni-Ti-C based metal matrix composites, developed using the laser engineered net shaping (LENSTM) process. These composites consist of an in situ formed and homogeneously distributed titanium carbide (TiC) as well as graphite phase reinforcing the nickel matrix. 3D microstructure helps in determining true morphology and spatial distribution of TiC and graphite phase as well as the phase evolution sequence. These Ni-TiC-C composites exhibit excellent tribological properties (low COF), while maintaining a relatively high hardness.
Date: May 2014
Creator: Borkar, Tushar Murlidhar
Partner: UNT Libraries