Search Results

Advanced search parameters have been applied.
open access

Hot helium flow test facility summary report

Description: This report summarizes the results of a study conducted to assess the feasibility and cost of modifying an existing circulator test facility (CTF) at General Atomic Company (GA). The CTF originally was built to test the Delmarva Power and Light Co. steam-driven circulator. This circulator, as modified, could provide a source of hot, pressurized helium for high-temperature gas-cooled reactor (HTGR) and gas-cooled fast breeder reactor (GCFR) component testing. To achieve this purpose, a high-temp… more
Date: June 1, 1980
Partner: UNT Libraries Government Documents Department
open access

De-entrainment on vertical elements in air droplet cross flow. [PWR]

Description: De-entrainment phenomena on vertical elements in air-water droplet cross flow are generated using a horizontal array of water spray nozzles and a draft-induced wind tunnel. These conditions are used to obtain experimental values of the de-entrainment efficiency of isolated elements (25.4-, 63.5-, and 101.6-mm-diam cylinders and a 76.2-mm-square tube), and of an array of 101.6-mm-diam cylinders. A flow model is developed that extrapolates the de-entrainment efficiency of isolated elements throug… more
Date: January 1, 1980
Creator: Dallman, J.C. & Kirchner, W.L.
Partner: UNT Libraries Government Documents Department
open access

Solar-thermal energy conversion and storage: cyclohexane dehydrogenation. Progress report, 30 September 1977-30 June 1978

Description: The objective of this project is to provide research support for the benzene/cyclohexane heat pipe development program at Sandia. The kinetics of the cyclohexane decomposition (energy collection) reaction over a commercially available naphtha reforming catalyst (RD-150, Englehard Industries) in the temperature range 400 to 800/sup 0/F and pressures of 1 to 40 atmospheres were measured. Significant amounts of side products such as toluene and butane were identified at temperatures above 550/sup … more
Date: July 1, 1978
Creator: Ritter, A.B.; DeLancey, G.B.; Schneider, J. & Silla, H.
Partner: UNT Libraries Government Documents Department
open access

State of the art of pressurized fluidized bed combustion systems

Description: This report was prepared at the request of the Tennessee Valley Authority (TVA) to clarify the development status of the pressurized fluidized bed combustor (PFBC) and to place in perspective the problems which are yet to be solved before commercialization of the concept is practical. This report, in essence, supersedes the interim report published in 1979, Assessment of the State of the Art of Pressurized Fluidized Bed Combustion Systems. A brief overview of the PFBC concept is included citing… more
Date: September 1, 1980
Creator: Graves, R.L.
Partner: UNT Libraries Government Documents Department
open access

Operating experience and procedures at the tritium systems test assembly

Description: Operating procedures are important for the safe and efficient operation of the Tritium Systems Test Assembly (TSTA). TSTA has been operating for four years with tritium in a safe and efficient manner. The inventory of tritium in the process loop is 100 grams and several milestone runs have been completed. This paper describes the methods used to operate TSTA. 3 refs., 1 fig.
Date: January 1, 1988
Creator: Carlson, R.V.; Binning, K.E.; Cole, S. P.; Jenkins, E. M.; Wilhelm, R. C. & Cole, S. P.
Partner: UNT Libraries Government Documents Department
open access

Coolant mixing in LMFBR rod bundles and outlet plenum mixing transients. Progress report, December 1, 1979-February 29, 1980

Description: Information is presented concerning bundle geometry with wrapped and bare rods; LMFBR outlet plenum flow mixing; and theoretical determination of local temperature fields in LMFBR fuel rod bundles.
Date: January 1, 1980
Creator: Todreas, N.E.; Golay, M.W. & Wolf, L.
Partner: UNT Libraries Government Documents Department
open access

Utilization of coal-water fuels in fire-tube boilers

Description: This project is a demonstration for firing coal-water slurry in a fire-tube boiler. It includes design, installation, and demonstration of the slurry firing equipment in a fire-tube boiler at the University of Alabama in Tuscaloosa. The project will be funded by the US Department of Energy with cost sharing from Jim Walter Resources and the University of Alabama. Energy and Environmental Research Corporation is the prime contractor responsible for all respects of the project. The specific objec… more
Date: January 1, 1991
Creator: Sommer, T. & Melick, T.
Partner: UNT Libraries Government Documents Department
open access

Conceptual design of a superconducting magnet coil for the large coil program. [Flat-wound NbTi coils]

Description: A conceptual design for a toroidal field (TF) coil for a six coil test array has been developed. The electromagnetic, cryogenic, structural, manufacturing, quality assurance and verification testing requirements have been analyzed. The bore is oval shaped and is 2.35 meters horizontally and 3.35 meters vertically. The coil is designed to operate at 8T peak field at rated current of 10450 amperes when the other 5 coils in the toroidal array are at 80% rated current. Using-flat-wound NbTi conduct… more
Date: January 1, 1977
Creator: Quay, R.; Bryant, R. W.; Koenig, R. F.; Ferrante, J. J.; Linkinhoker, C. L.; Donato, J. W. et al.
Partner: UNT Libraries Government Documents Department
open access

High-temperature turbine technology program hot-gas path development test. Part II. Testing

Description: This topical report of the US Department of Energy High-Temperature Turbine Technology (DOE-HTTT) Phase II program presents the results of testing full-scale water-cooled first-stage and second-stage turbine nozzles at design temperature and pressure to verify that the designs are adequate for operation in a full-scale turbine environment. Low-cycle fatigue life of the nozzles was demonstrated by subjecting cascade assemblies to several hundred simulated startup/shutdown turbine cycles. This te… more
Date: March 1, 1982
Creator: Horner, M. W.
Partner: UNT Libraries Government Documents Department
open access

Coal Technology Program. Progress report for November 1977

Description: A block of Pittsburgh seam bituminous coal and a block of Wyodak subbituminous coal were pyrolyzed under reducing gas in support of in situ gasification. Information from previously completed block pyrolysis of bituminous coal under an argon atmosphere show that differences in evolved gas result from differences in heating rates. Compared to block pyrolysis at 0.3 C/sup 0//min, block pyrolysis at 3 C/sup 0//min produces less gas but gas with a higher heating value, yielding a higher overall pyr… more
Date: January 1, 1978
Partner: UNT Libraries Government Documents Department
open access

Calorimetric and optical beam diagnostics on the LBL 120-keV neutral beam test facility

Description: The 120-keV Neutral Beam Test Facility at LBL is fitted with several types of instrumentation to determine the properties of the 10- to 15-A hydrogen and deuterium beams produced in this facility. These include a neutral particle dump for measuring the temperature profile generated by the beam, and a fixed and a moveable ion dump to measure the temperature profiles generated by the various ion components after they have been swept out of the neutral beam by a bending magnet. These several dumps… more
Date: October 1, 1977
Creator: Burrell, C. F.; Cooper, W. S.; Steele, W. F. & Smith, R. R.
Partner: UNT Libraries Government Documents Department
open access

Design and operation of an inert gas facility for thermoelectric generator storage

Description: While the flight hardware is protected by design from the harsh environments of space, its in-air storage often requires special protection from contaminants such as dust, moisture and other gases. One of these components, the radioisotope thermoelectric generator (RTG) which powers the missions, was deemed particularly vulnerable to pre-launch aging because the generators remain operational at core temperatures in excess of 1000 degrees centigrade throughout the storage period. Any oxygen perm… more
Date: January 1, 1990
Creator: Goebel, C. J.
Partner: UNT Libraries Government Documents Department
open access

OTEC-1 Power System Test Program: test plan for first deployment

Description: This report describes in detail all tests planned for the first eight-month deployment of OTEC-1, a test facility constructed by the US Department of Energy in order to test heat exchangers for closed-cycle power plants using ocean thermal energy. Tests to be performed during the first-deployment period are aimed primarily at determining (1) the effectiveness of countermeasures in preventing biofouling of the heat exchanters, (2) the extent of environmental impacts associated with operation of … more
Date: March 1, 1980
Partner: UNT Libraries Government Documents Department
open access

SOLERAS - Solar Controlled Environment Agriculture Project. Final report, Volume 7. Science Applications, Incorporated field test facility preliminary design

Description: This report contains the preliminary design of an SCEAS Engineering Test Facility (ETF). The ETF is a 3600 m/sup 2/ fluid roof greenhouse with an inflated plastic film roof to maintain a clean environment for the fluid roof and to protect the inner glazing from hail and other small missiles. The objective of the design was the faithful scaling of the commercial facility to ensure that the ETF results could be extrapolated to a commercial facility of any size. Therefore, all major features, incl… more
Date: January 1, 1985
Partner: UNT Libraries Government Documents Department
open access

Rapid quenching of molten lithium-aluminum jets in water under loss-of-control-rod-cooling conditions

Description: A series of fifteen tests were performed to investigate the thermal interactions between molten LiAl control rod material and water under conditions prototypic of the loss-of-control-rod-cooling (LCRC) accident scenario. The experimental parameters such as melt mass, stream diameter, melt temperature and flowrate, water depth and water temperature were controlled or varied to agree with analytically determined conditions, thus insuring prototypicality of the experiments and applicability of the… more
Date: January 1, 1992
Creator: Greene, G. A.; Finfrock, C. C.; Schwarz, C. E.; Allison, D. K. & Hyder, M. L.
Partner: UNT Libraries Government Documents Department
open access

Separate effects test stand for obtaining hydrotransport data

Description: Based on earlier hydrotransport research by English and Russian researchers, a special test stand has been designed and constructed to obtain data to determine hydraulic drag, pipe wear, and comminution of particles. These data are intended for design and separate-effects operating information. This information will be used to supplement data developed by the Hydrotransport Research Facility located at the Pittsburgh Mining Operations, Pittsburgh, Pennsylvania. This report describes the equipme… more
Date: August 1, 1980
Creator: Allen, C. H.
Partner: UNT Libraries Government Documents Department
open access

Molecular Sieve Regeneration System for assaying HTO from detritiation systems

Description: A Molecular Sieve Regeneration System (MSRS) is being added to the existing Tritium Waste Treatment system (TWT) within the Tritium Systems Test Assembly (TSTA) at the Los Alamos National Laboratory. This system is an upgrade to the TWT to provide accurate measurements of the liquid waste generated from this system. Within the TWT, hydrogen isotopes are removed from the effluent gas stream by the catalytic conversion to water and the subsequent removal of water by molecular sieve trapping prior… more
Date: January 1, 1992
Creator: Nasise, J.E.; Anderson, J.L. (Los Alamos National Lab., NM (United States)) & Naruse, Y. (Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan))
Partner: UNT Libraries Government Documents Department
open access

Two-phase flow studies. Final report

Description: Progress on the following is reported: literature survey, design of two-phase flow testing facility, design of nozzle loop, thermophysical properties, design manual, and advanced energy conversion systems. (MHR)
Date: August 1, 1980
Creator: Kestin, J. & Maeder, P. F.
Partner: UNT Libraries Government Documents Department
open access

Solar Pilot Plant, Phase I. Preliminary design report. Volume II. System description and system analysis. CDRL item 2

Description: Honeywell conducted a parametric analysis of the 10-MW(e) solar pilot plant requirements and expected performance and established an optimum system design. The main analytical simulation tools were the optical (ray trace) and the dynamic simulation models. These are described in detail in Books 2 and 3 of this volume under separate cover. In making design decisions, available performance and cost data were used to provide a design reflecting the overall requirements and economics of a commercia… more
Date: May 1, 1977
Partner: UNT Libraries Government Documents Department
open access

Development of BEACON technology. Quarterly report, April-June 1982

Description: The BEACON process involves the catalytic deposition of a highly reactive form of carbon from a gas stream which contains carbon monoxide. The carbon-depleted gas is combusted with air to produce power, and the carbon is reacted with steam to produce methane or hydrogen. Experiments were continued this quarter with the objective of improving the carbon deposition efficiency using a Paraho retort off-gas mixture. Analysis has shown that the use of the Paraho off-gas to make hydrogen would be att… more
Date: March 1, 1983
Partner: UNT Libraries Government Documents Department
open access

Summary of HTGR (high-temperature gas-cooled reactor) benchmark data from the high temperature lattice test reactor

Description: The High Temperature Lattice Test Reactor (HTLTR) was a unique critical facility specifically built and operated to measure variations in neutronic characteristics of high temperature gas cooled reactor (HTGR) lattices at temperatures up to 1000{degree}C. The Los Alamos National Laboratory commissioned Pacific Northwest Laboratory (PNL) to prepare this summary reference report on the HTLTR benchmark data and its associated documentation. In the initial stages of the program, the principle of th… more
Date: October 1, 1989
Creator: Newman, D.F.
Partner: UNT Libraries Government Documents Department
open access

The safety record at the tritium systems test assembly

Description: This work addresses an important objective of the TSTA-demonstrating that the large tritium inventories required for fusion reactors can be routinely handled, without radiation exposure to operating personnel and without significant environemtnal releases. The techniques by which TSTA has achieved low releases and personnel exposures include high-integrity primary piping systems that exclude contact between tritium and organic materials, a secondary containment system that encloses all primary … more
Date: February 1, 1988
Creator: Coffin, D.O.
Partner: UNT Libraries Government Documents Department
open access

Quarterly Progress Report on Fission Product Behavior in LWRs for the Period October-December 1977

Description: Analysis of release data obtained during High Burnup Fuel Test 10 (HBU-10) has been completed. In this test the fuel rod segment was ruptured by internal pressurization at 900/sup 0/C, at which time the temperature was rapidly increased to 1200/sup 0/C and maintained at this temperature for 10 min. Approximately 0.061% of the total cesium inventory in the rod segment was released; this was accompanied by the release of about 1.69% of the total /sup 85/Kr inventory. Moreover, about 0.022% of the… more
Date: February 1, 1978
Creator: Malinauskas, A. P.; Lorenz, R. A.; Collins, J. L.; Osborne, M. F.; Whatley, S. K. & Towns, R. L.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen