1,531 Matching Results

Search Results

Advanced search parameters have been applied.

Fundamentals of Coal Sampling

Description: From Forward: "The intent has been rather to furnish another contribution to the growing list of studies on the principles governing the establishment of specifications for the sampling of coal."
Date: 1944
Creator: Landry, Bertrand A.
Partner: UNT Libraries Government Documents Department

Proposal for Extending the UPC Memory Copy Library Functions andSupporting Extensions to GASNet, Version 2.0

Description: This document outlines a proposal for extending UPC'spoint-to-point memcpy library with support for explicitly non-blockingtransfers, and non-contiguous (indexed and strided) transfers. Variousportions of this proposal could stand alone as independent extensions tothe UPC library. The designs presented here are heavily influenced byanalogous functionality which exists in other parallel communicationsystems, such as MPI, ARMCI, Titanium, and network hardware API's such asQuadrics elan, Infiniband vapi, IBM LAPI and Cray X-1. Each sectioncontains proposed extensions to the libraries in the UPC LanguageSpecification (section 7) and corresponding extensions to the GASNetcommunication system API.
Date: March 22, 2007
Creator: Bonachea, Dan
Partner: UNT Libraries Government Documents Department

Replica Registration Service - Functional Interface Specification1.0

Description: The goal of the Replica Registration Service (RRS) is toprovide a uniform interface to various file catalogs, replica catalogs,and metadata catalogs. It can be thought of as an abstraction of theconcepts used in such systems to register files and their replicas. Someexperiments may prefer to support their own file catalogs (which may havetheir own specialized structures, semantics, and implementations) ratherthan use a standard replica catalog. Providing an RRS that can interactwith such a catalog (for example by invoking a script) can permit thatcatalog to be invoked as a service in the same way that other replicacatalogs do. If at a later time the experiment wishes to change toanother file catalog or an RLS, it is only a matter of developing an RRSfor that new catalog and replacing the existing catalog. In addition,some systems use metadata catalogs or other catalogs to manage the filename spaces. Our goal is to provide a single interface that supports theregistration of files into such name spaces as well as retrieving thisinformation.
Date: February 28, 2005
Creator: Shoshani, Arie; Sim, Alex & Stockinger, Kurt
Partner: UNT Libraries Government Documents Department

RAPID MAPPING TOOL: AN ARCMAP EXTENSION

Description: Cartographic production laboratories produce large volumes of maps for diverse customers. Turnaround time and consistency are key concerns. The Rapid Mapping Tool is an ArcMap based tool that enables rapid creation of maps to meet customer needs. This tool was constructed using VB/VBA, ArcObjects, and ArcGIS templates. The core capability of ArcMap is extended for custom map production by storing specifications associated with a map or template in a companion XML document. These specifications include settings and preferences used to create custom maps. The tool was developed as a component of an enterprise GIS, which enables spatial data management and delivery using ArcSDE, ArcIMS, Oracle, and a web-based request tracking system.
Date: June 18, 2002
Creator: LINGER, STEVE P.; RICH, PAUL M.; WALTHER, DOUG; WITKOWSKI, MARC S.; JONES, MARCIA A. & KHALSA, HARI S.
Partner: UNT Libraries Government Documents Department

Atmospheric Dispersion Capability for T2VOC

Description: Atmospheric transport by variable-K theory dispersion has been added to T2VOC. The new code, T2VOCA, models flow and transport in the subsurface identically to T2VOC, but includes also the capability for modeling passive multicomponent variable-K theory dispersion in an atmospheric region assumed to be flat, horizontal, and with a logarithmic wind profile. The specification of the logarithmic wind profile in the T2VOC input file is automated through the use of a build code called ATMDISPV. The new capability is demonstrated on 2-D and 3-D example problems described in this report.
Date: September 19, 2005
Creator: Oldenburg, Curtis M.
Partner: UNT Libraries Government Documents Department

Computer-Aided dispatching system design specification

Description: This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol emergency response. This system is defined as a Commercial-Off the-Shelf computer dispatching system providing both text and graphical display information while interfacing with the diverse reporting system within the Hanford Facility. This system also provided expansion capabilities to integrate Hanford Fire and the Occurrence Notification Center and provides back-up capabilities for the Plutonium Processing Facility.
Date: May 3, 1996
Creator: Briggs, M. G.
Partner: UNT Libraries Government Documents Department

LAWRENCE RADIATION LABORATORY COUNTING HANDBOOK

Description: The Counting Handbook is a compilation of operational techniques and performance specifications on counting equipment in use at the Lawrence Radiation Laboratory, Berkeley. Counting notes have been written from the viewpoint of the user rather than that of the designer or maintenance man. The only maintenance instructions that have been included are those that can easily be performed by the experimenter to assure that the equipment is operating properly.
Date: October 1, 1966
Creator: Group, Nuclear Instrumentation
Partner: UNT Libraries Government Documents Department

A Comprehensive Theory of Yielding and Failure for Isotropic Materials

Description: A theory of yielding and failure for homogeneous and isotropic materials is given. The theory is calibrated by two independent, measurable properties and from those it predicts possible failure for any given state of stress. It also differentiates between ductile yielding and brittle failure. The explicit ductile-brittle criterion depends not only upon the material specification through the two properties, but also and equally importantly depends upon the type of imposed stress state. The Mises criterion is a special (limiting) case of the present theory. A close examination of this case shows that the Mises material idealization does not necessarily imply ductile behavior under all conditions, only under most conditions. When the first invariant of the yield/failure stress state is sufficiently large relative to the distortional part, brittle failure will be expected to occur. For general material types, it is shown that it is possible to have a state of spreading plastic flow, but as the elastic-plastic boundary advances, the conditions for yielding on it can change over to conditions for brittle failure because of the evolving stress state. The general theory is of a three dimensional form and it applies to full density materials for which the yield/failure strength in uniaxial tension is less than or at most equal to the magnitude of that in uniaxial compression.
Date: August 10, 2006
Creator: Christensen, R M
Partner: UNT Libraries Government Documents Department

National Ignition Facility system design requirements conventional facilities SDR001

Description: This System Design Requirements (SDR) document specifies the functions to be performed and the minimum design requirements for the National Ignition Facility (NIF) site infrastructure and conventional facilities. These consist of the physical site and buildings necessary to house the laser, target chamber, target preparation areas, optics support and ancillary functions.
Date: April 9, 1996
Creator: Hands, J.
Partner: UNT Libraries Government Documents Department

NIF optics phase gradient specfication

Description: A root-mean-square (rms) phase gradient specification seems to allow a good connection between the NIP optics quality and focal spot requirements. Measurements on Beamlet optics individually, and as a chain, indicate they meet the assumptions necessary to use this specification, and that they have a typical rms phase gradient of {approximately}80 {angstrom}/cm. This may be sufficient for NIP to meet the proposed Stockpile Stewardship Management Program (SSMP) requirements of 80% of a high- power beam within a 200-250 micron diameter spot. Uncertainties include, especially, the scale length of the optics phase noise, the ability of the adaptive optic to correct against pump-induced distortions and optics noise, and the possibility of finding mitigation techniques against whole-beam self-focusing (e.g. a pre- correction optic). Further work is needed in these areas to better determine the NIF specifications. This memo is a written summary of a presentation on this topic given by W. Williams 24 April 1997 to NIP and LS&T personnel.
Date: May 2, 1997
Creator: Williams, W.; Auerbach, J.; Hunt, J.; Lawson, L.; Manes, K.; Orth, C. et al.
Partner: UNT Libraries Government Documents Department

An adaptive optic for correcting low-order wavefront aberrations

Description: Adaptive Optics used for correcting low-order wavefront aberrations were tested and compared using interferometry, beam propagation, and a far-field test. Results confirm that the design and manufacturing specifications were met. Experimental data also confirms theoretical performance expectations, indicating the usefulness of these optics (especially in a laser-beam processing system), and identifying the resulting differences between the two fabrication methods used to make the optics.
Date: September 2, 1999
Creator: Thompson, C A & Wilhelmsen, J
Partner: UNT Libraries Government Documents Department

The LEDA beam-position measurement system

Description: This paper describes the beam-position measurement system being developed for the Low Energy Demonstration Accelerator (LEDA) and the Accelerator Production of Tritium (APT) projects at Los Alamos National Laboratory. The system consists of a beam-position monitor (BPM) probe, cabling, down-converter module, position/intensity module, on-line error-correction system, and the necessary control system interfaces. The modules are built on the VXI-interface standard and are capable of duplex data transfer with the control system. Some of the key, system parameters are: position-measurement bandwidth of at least 180 kHz, the ability to measure beam intensity, a beam-position measurement accuracy of less than 1.25 percent of the bore radius, a beam-current dynamic range of 46 dB, a total system dynamic range in excess of 75 dB, and built-in on-line digital-system-error correction.
Date: August 1, 1997
Creator: Rose, C.R.; Gilpatrick, J.D. & Stettler, M.W.
Partner: UNT Libraries Government Documents Department

Wire brush fastening device

Description: A fastening device is provided which is a variation on the conventional nut and bolt. The bolt has a longitudinal axis and threading helically affixed thereon along the longitudinal axis. A nut having a bore extending therethrough is provided. The bore of the nut has a greater diameter than the diameter of the bolt so the bolt can extend through the bore. An array of wire bristles are affixed within the bore so as to form a brush. The wire bristles extend inwardly from the bore and are constructed and arranged of the correct size, length and stiffness to guide the bolt within the bore and to restrain the bolt within the bore as required. A variety of applications of the wire brush nut are disclosed, including a bolt capture device and a test rig apparatus.
Date: August 31, 1993
Creator: Meigs, R.A.
Partner: UNT Libraries Government Documents Department

Motion control design of the SDSS 2.5 mts. telescope

Description: This paper describes the control system analysis and design for the three principal axes of the 2.5 mts SDSS Telescope. The telescope requirements are good tracking performance with errors lower than 165 arcsec rms in the speed range between 0 to 45 arcsec/sec for all the axes. The pointing error is about 2 arcsec rms per axis with a maximum absolute value of 5 arcsec. The telescope has the additional requirements of slewing, between tracking areas, with maximum speed of 3 degree/sec. The dynamical model of the telescope including the friction is analyzed and based on that, the design of a PID controller for each axis is presented. The specifications for pointing and tracking mode are achieved with this design in all the range of velocities and the performance in slew-mode is acceptable. Simulations and experimental results depict the behavior of the telescope in slewing, tracking and pointing.
Date: March 24, 2000
Creator: Rivetta, C.; Briegel, C. & Czarapata, P.
Partner: UNT Libraries Government Documents Department

Epileptic Seizure Forewarning by Nonlinear Techniques

Description: Nicolet Biomedical Inc. (NBI) is collaborating with Oak Ridge National Laboratory (ORNL) under a Cooperative Research and Development Agreement (CRADA) to convert ORNL.s patented technology for forewarning of epileptic seizures to a clinical prototype. This technical report describes the highlights of the first year.s effort. The software requirements for the clinical device were specified from which the hardware specifications were obtained. ORNL's research-class FORTRAN was converted to run under a graphical user interface (GUI) that was custom-built for this application by NBI. The resulting software package was cloned to desktop computers that are being tested in five different clinical sites. Two hundred electroencephalogram (EEG) datasets from those clinical sites were provided to ORNL for detailed analysis and improvement of the forewarning methodology. Effort under this CRADA is continuing into the second year as planned.
Date: February 5, 2001
Creator: Hively, LM
Partner: UNT Libraries Government Documents Department

Design and Construction of the Bevatron

Description: This report summarizes the design and construction of the Bevatron (6-Bev proton synchrotron) with emphasis on the engineering problems. It includes specifications, outline drawings, and a bibliography of other reports concerning the subject. Operating results and changes made after the initial start-up in February 1954 are mentioned only briefly.
Date: September 13, 1957
Creator: Brobeck, William M.
Partner: UNT Libraries Government Documents Department

Progress with PXIE MEBT Chopper

Description: A capability to provide a large variety of bunch patterns is crucial for the concept of the Project X serving MW-range beam to several experiments simultaneously. This capability will be realized by the Medium Energy Beam Transport's (MEBT) chopping system that will divert 80% of all bunches of the initially 5 mA, 2.1 MeV CW 162.5 MHz beam to an absorber according to a pre-programmed bunch-by-bunch selection. Being considered one of the most challenging components, the chopping system will be tested at the Project X Injector Experiment (PXIE) facility that will be built at Fermilab as a prototype of the Pojrect X front end. The bunch deflection will be made by two identical sets of travelling-wave kickers working in sync. Presently, two versions of the kickers are being investigated: a helical 200 Ohm structure with a switching-type 500 V driver and a planar 50 Ohm structure with a linear {+-} 250 V amplifier. This paper describes the chopping system scheme and functional specifications for the kickers, present results of electromagnetic measurements of the models, discuss possible driver schemes, and show a conceptual mechanical design.
Date: May 1, 2012
Creator: Lebedev, V.; Chen, A.; Pasquinelli, R; Peterson, D.; Saewert, G.; Shemyakin, A. et al.
Partner: UNT Libraries Government Documents Department

A Case Study of Metadata Creation in the University of North Texas Libraries' Digital Collections

Description: This presentation contains a case study of the work carried out by the University of North Texas (UNT) Libraries and the intersection of metadata modeling, metadata input rules and documentation, metadata quality assessments, and technology to empower metadata editors to create high-quality metadata.
Date: August 15, 2016
Creator: Tarver, Hannah
Partner: UNT Libraries