19 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "Sodium cooled reactors -- Design and construction."  
Results: 1 - 19
open access

Conceptual design of an in-pile package loop for sodium-cooled thermal reactor fuel testing

Description: Report issued by the APDA over a design study "of a facility for testing sodium-cooled thermal reactor fuel assemblies in the Advanced Test Reactor" (p. 5). The results are presented and discussed. This report includes tables, and illustrations.
Date: September 15, 1961
Creator: Blessing, W. G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Experiments and Analysis for SM-1 Core II With Special Components

Description: Abstract: This technical report contains a summary of analytical and experimental work performed on SM-1 Core II, with special components is presented. The effects of these special assemblies upon power distribution and core reactivity were calculated and compared to experimental measurements. A thermal analysis was conducted to determine steady state and transient performance of the special test components of the core as well as some of the hotter standard Core II components. Experimental work… more
Date: January 1, 1961
Creator: Lee, D. H.; Robinson, R. A. & Segalman, I.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mid-Year Summary Report October 1, 1960-March 31, 1961 Army Pwr Support and Development Program

Description: Abstract: A cyclic stress analysis of the SM-1 primary system was carried out. Problems encountered in the fabrication of PM-2A Core II and SM-lA Core II are described, and the results of an examination of damaged SM-lA Core I stationary fuel elements reported. A preliminary study of the radiation damage to SM-1 reactor vessel was made and the possibility of annealing the vessel discussed. Performance analyses are presented for five cores: SM-1 Core, SM-1 Core 1 rearranged and spiked, SM-1 Core… more
Date: June 2, 1961
Creator: Hoover, H. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Investigation of Local Boiling of SM-1

Description: Abstract; SM-1 Reactor Core I Rearranged and Spiked, and Core II with Special Components were analyzed under various off-design conditions to induce nucleate boiling. The steady state code, STDY-3, written for the thermal analysis of pressurized water cores, was employed for the analysis. The code performs a complete steady state parallel channel thermal analysis for both nominal and hot channels. Thermal characteristics of individual elements were investigated while changing the parameters of… more
Date: June 20, 1961
Creator: Bradley, P. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 1. Thermal & Mechanical Design

Description: This technical report represents the final design for a sodium to sodium intermediate heat exchanger and a sodium to water steam generator. The intermediate heat exchanger is designed for operation in a nuclear power plant using liquid sodium as the primary and secondary coolant. Since the primary fluid coming fro the reactor is radioactive, the purpose of the IHX is to transfer heat to a nonradioactive fluid which then goes to the steam generator. Because of radioactivity the unit will be encl… more
Date: September 30, 1960
Creator: Alco Products (Firm).
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 2. Chemical & Stress Analysis

Description: Introduction: This volume deals principally with the chemical analysis and the stress analysis for a sodium to sodium intermediate heat exchanger and a sodium to water steam generator. The work presented is an extension and modification of the analysis presented in the preliminary design report. The chemical analysis covers the sodium cover gas system and the effects of sodium-water reactions in the event of a leak in the steam generator. Considerable design work was done in an effort to mainta… more
Date: September 30, 1960
Creator: Alco Products (Firm).
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 3. Specifications

Description: Introduction: Sodium Components Material Specifications. Twenty-three material, inspection and welding specification are presented for the various parts of both the intermediate heat exchanger and steam generator. Tables indicate the applicable parts and assemblies to which these specifications shall apply. For other parts, where the material requirements are not severe, the ASTM or other indicated specifications shall apply.
Date: September 30, 1960
Creator: Alco Products (Firm).
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 4. Operation & Maintenance

Description: This technical report contains the operation and maintenance specifications for the intermediate heat exchanger and the steam generator. The report contains eight sections: (1) General Information, (2) Shipping and Installation, (3) Operation Procedures, (4) Scram and Casualty Shutdowns, (5) Leaks, (6) Instrumentation and Control, (7) Maintenance, and (8) four Appendixes (a) Boiler Water Chemistry Recommendations, (b) Final Concept Drawings, (c) Industrial Nucleonics Literature on Liquid Level… more
Date: September 30, 1960
Creator: Alco Products (Firm).
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Suitability of Inconel for Corrosion Protection on Water Side of Sodium Component Steam Generator

Description: Abstract; The heat exchanger and steam generator for the U.S. Atomic Energy Commission Sodium Components Project will be constructed entirely of type 316 stainless steel. Because of the susceptibility of this alloy to stress corrosion cracking, it is proposed to clad all areas of the steam generator with Inconel where the stainless steel will be exposed to water and steam. This report includes a discussion of the work by numerous investigators that justify the selection of Inconel for this se… more
Date: March 1, 1961
Creator: Phillips, Laurence E. & Vawter, Frank J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for SM-1 Core II With the SM-1 Core II With the Silver-Cadmium-Indium Control Rod Absorber Section

Description: Abstract: In the March-April 1962 shutdown of SM-1 Core II, the SM-28 element will be re-inserted in SM-1 Core II and an SM-1 Core I element will be removed. An SM-1 Core II europium absorber will be replaced by a Ag-Cd-In absorber, and surveillance specimens will be inserted above the core support structure. Analysis of these changes concludes that re-insertion of the SM-2B stationary element and insertion of surveillance specimens do not affect hazards potential previously defined for SM-1.… more
Date: March 15, 1962
Creator: Stephenson, L. D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Steady State and Transient Thermal and Hydraulic Analysis of SM-2 Termination Report

Description: Abstract: Thermal characteristics of the SM-2 core were analyzed at steady state and loss of flow conditions. For steady state operation, the steady state code STDY-3 was used. For transients during a loss of flow accident, ART-02, a one-dimensional code, was used. This analysis indicates the SM-2 core is safe from burnout under steady state operation at design power level (28 tMW) because (1) no nucleate boiling exists, and (2) the minimum burnout ratio is above 2.0. The core is safe from burn… more
Date: September 8, 1961
Creator: Segalman, I. & Bradley, P. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Test Program for 30 Megawatt Prototype Sodium Intermediate Heat Exchanger and Steam Generator

Description: The designer's concept of a test program for the 30-Mw prototype intermediate heat exchanger and steam generator designed and fabricated as part of the Sodium Components Development Program is presented. The performance data will serve to verify the thermal design, or allow application of improved techniques to future designs, give an improved basis for stress analysis in design of future units, and demonstrate the capability and limitations of the units in relation to the performance specifica… more
Date: September 14, 1962
Creator: Alco Products (Firm).
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Tube-To-Tubesheet Welding Development Programs to 30 Megawatt Prototype Sodium Intermediate heat Exchanger and Steam Generator

Description: Special welding techniques for joining Inconel weld overlays on type 316 stainless steel tubesheets and channels are described. The program for the development of the required welding procedures are divided into three specific programs: overlaying Inconel filler Metal 82 on type 316 stainless steel, welding type 316 stainless steel tubes to a type 316 stainless steel tubesheet, and welding Inconel-type 316 stainless steel composite tubes to Inconel weld overlaid type 316 tubesheets. Shock tests… more
Date: 1963
Creator: Alco Products (Firm).
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Scale "Up or Down" Analysis for Prototype Test

Description: Introduction: In conjunction with the final design and development of a 70 MW sodium intermediate heat exchanger and a sodium steam generator, an analysis is required which can be used as a basis for a determination to scale up or scale down the designs. Included in this analysis are those considerations leading to the recommendation of the best prototype test unit and to some of the limits imposed on scaling up or down when considering future applications of designs other than those actually … more
Date: May 1, 1960
Creator: Alco Products (Firm).
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

SM-2 Full Scale Flow Studies Termination Report

Description: Abstract: Hydrodynamic flow studies were conducted on a full scale model of the SM-2 reactor vessel and core. Test fluid was water at 200 psi and 200 degree F. Test facilities, model, and instrumentation design are discussed. Flow distribution in the stationary fuel elements, lattices, and control rods of the second pass was investigated. Pressure losses through the various core components were measured and are compared with calculated values. Observed over-all pressure drop was 71 feet of wate… more
Date: July 30, 1961
Creator: Christenson, J. A.; Richards, W. M. S. & Davidson, S. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen