536 Matching Results

Search Results

Advanced search parameters have been applied.

High power density molten carbonate fuel cells

Description: Our results to date indicate that the specific power of the MCFC can be increased from 1200 W/m{sup 2} to above 2000W/m{sup 2} through the use of advanced components such as the double doped LiFeO{sub 2} cathode and pressurized operation. Its volumetric power density can also be increased by an additional 60% by multiple manifolding. Therefore, MCFCs with two to three times the power density of the current generation of MCFCs are possible.
Date: July 1, 1995
Creator: Bloom, I.; Johnson, S. A.; Geyer, H. K.; Roche, M. F.; Krumpelt, M. & Myles, K. M.
Partner: UNT Libraries Government Documents Department

The Challenges Associated with High Burnup and High Temperature for UO2 TRISO-Coated Particle Fuel

Description: The fuel service conditions for the DOE Next Generation Nuclear Plant (NGNP) will be challenging. All major fuel related design parameters (burnup, temperature, fast neutron fluence, power density, particle packing fraction) exceed the values that were qualified in the successful German UO2 TRISO-coated particle fuel development program in the 1980s. While TRISO-coated particle fuel has been irradiated at NGNP relevant levels for two or three of the design parameters, no data exist for TRISO-coated particle fuel for all five parameters simultaneously. Of particular concern are the high burnup and high temperatures expected in the NGNP. In this paper, where possible, we evaluate the challenges associated with high burnup and high temperature quantitatively by examining the performance of the fuel in terms of different known failure mechanisms. Potential design solutions to ameliorate the negative effects of high burnup and high temperature are also discussed.
Date: February 1, 2005
Creator: Petti, David & Maki, John
Partner: UNT Libraries Government Documents Department

Best Practice for Energy Efficient Cleanrooms:Minienvironments

Description: Cleanroom air-recirculation systems typically account for a significant portion of the HVAC energy use in cleanrooms. High electric power density is normally required for fans to deliver large volume of airflows that were designed, supplied, recirculated, and exhausted within a given time. With the increasing demand for specific contamination control, it is important to optimize design of clean spaces. Best practice in cleanroom air system design includes right-sizing the systems in cleanrooms and adopting minienvironments. Implementing and integrating minienvironments in cleanrooms can improve contamination control and save significant energy. A minienvironment is a localized environment created by an enclosure to isolate a product or process from the surrounding environment. The advantages in using minienvironments include the following: (1) Minienvironments may create better contamination control and process integration. (2) Minienvironments may maintain better contamination control by better control of pressure difference or through use of unidirectional airflows, e.g., cleanliness-class upgrade required for certain process. (3) Minienvironments may potentially reduce energy costs. The use of fan-filter units (FFU) in minienvironments is common. The energy efficiency of such air-delivery systems can vary significantly because of the difference in energy performance, airflow paths, and operating conditions. Simply adding minienvironments with fan-filter units in an existing cleanroom will increase power density and energy intensity for delivering airflow in the space served, if everything else is unchanged. However, by considering contamination control requirements in the various spaces minienvironments can be integrated with the surrounding cleanroom to optimize the overall electric power demand for the facility and to achieve specific cleanliness in each area. In addition, selecting energy efficient minienvironment systems will further improve the overall energy efficiency of the clean spaces.
Date: June 15, 2005
Creator: Xu, Tengfang
Partner: UNT Libraries Government Documents Department

Investigating the performance of a minienvironment system

Description: A minienvironment is a localized environment created by an enclosure to isolate a product or process from the surrounding environment. Minienvironments have been gaining popularity to provide effective containment for critical contamination control. The use of minienvironments can provide several orders of magnitude improvement in particle cleanliness levels, while energy intensity may be shifted from the conventional cleanroom systems to the minienvironments that enclose the specific process. The purpose of this paper is to study the energy performance of a minienvironment air system in a ballroom setting, to quantify power density of such a system, and to identify areas for energy savings from high-performance minienvironments.
Date: May 20, 2005
Creator: Xu, Tengfang
Partner: UNT Libraries Government Documents Department

Design of a VHF-band RF Photoinjector with Megahertz BeamRepetition Rate

Description: New generation accelerator-based X-ray light sources require high quality beams with high average brightness. Normal conducting L- and S-band photoinjectors are limited in repetition rate and D-C (photo)injectors are limited in field strength at the cathode. We propose a low frequency normal-conducting cavity, operating at 50 to 100MHz CW, to provide beam bunches of up to the cavity frequency. The photoinjector uses a re-entrant cavity structure, requiring less than 100 kW CW, with a peak wall power density less than 10 W/cm{sup 2}. The cavity will support a vacuum down to 10 picoTorr, with a load-lock mechanism for easy replacement of photocathodes. The photocathode can be embedded in a magnetic field to provide correlations useful for emittance exchange. Beam dynamics simulations indicate that normalized emittances smaller than 1 mm-mrad are possible with gap voltage of 750 kV, with fields up to 20 MV/m at the photocathode, for 1 nanocoulomb charge per bunch after acceleration and emittance compensation. Long-bunch operation (10's of picosecond) is made possible by the low cavity frequency, permitting low bunch current at the 750 kV gap voltage.
Date: June 1, 2007
Creator: Staples, J.W.; Baptiste, K.M.; Corlett, J.N.; Kwiatkowski, S.; Lidia, S.M.; Qiang, J. et al.
Partner: UNT Libraries Government Documents Department

FreedomCAR Advanced Traction Drive Motor Development Phase I

Description: The overall objective of this program is to design and develop an advanced traction motor that will meet the FreedomCAR and Vehicle Technologies (FCVT) 2010 goals and the traction motor technical targets. The motor specifications are given in Section 1.3. Other goals of the program include providing a cost study to ensure the motor can be developed within the cost targets needed for the automotive industry. The program has focused on using materials that are both high performance and low costs such that the performance can be met and cost targets are achieved. In addition, the motor technologies and machine design features must be compatible with high volume manufacturing and able to provide high reliability, efficiency, and ruggedness while simultaneously reducing weight and volume. Weight and volume reduction will become a major factor in reducing cost, material cost being the most significant part of manufacturing cost at high volume. Many motor technology categories have been considered in the past and present for traction drive applications, including: brushed direct current (DC), PM (PM) brushless dc (BLDC), alternating current (AC) induction, switched reluctance and synchronous reluctance machines. Of these machine technologies, PM BLDC has consistently demonstrated an advantage in terms of power density and efficiency. As rare earth magnet cost has declined, total cost may also be reduced over the other technologies. Of the many different configurations of PM BLDC machines, those which incorporate power production utilizing both magnetic torque as well as reluctance torque appear to have the most promise for traction applications. There are many different PM BLDC machine configurations which employ both of these torque producing mechanisms; however, most would fall into one of two categories--some use weaker magnets and rely more heavily on reluctance torque (reluctance-dominant PM machines), others use strong PMs and supplement with reluctance torque (magnet-dominant ...
Date: September 1, 2006
Creator: Ley, Josh (UQM Technologies, Inc.) & Lutz, Jon (UQM Technologies, Inc.)
Partner: UNT Libraries Government Documents Department

Exploiting Data Similarity to Reduce Memory Footprints

Description: Memory size has long limited large-scale applications on high-performance computing (HPC) systems. Since compute nodes frequently do not have swap space, physical memory often limits problem sizes. Increasing core counts per chip and power density constraints, which limit the number of DIMMs per node, have exacerbated this problem. Further, DRAM constitutes a significant portion of overall HPC system cost. Therefore, instead of adding more DRAM to the nodes, mechanisms to manage memory usage more efficiently - preferably transparently - could increase effective DRAM capacity and thus the benefit of multicore nodes for HPC systems. MPI application processes often exhibit significant data similarity. These data regions occupy multiple physical locations across the individual rank processes within a multicore node and thus offer a potential savings in memory capacity. These regions, primarily residing in heap, are dynamic, which makes them difficult to manage statically. Our novel memory allocation library, SBLLmalloc, automatically identifies identical memory blocks and merges them into a single copy. SBLLmalloc does not require application or OS changes since we implement it as a user-level library. Overall, we demonstrate that SBLLmalloc reduces the memory footprint of a range of MPI applications by 32.03% on average and up to 60.87%. Further, SBLLmalloc supports problem sizes for IRS over 21.36% larger than using standard memory management techniques, thus significantly increasing effective system size. Similarly, SBLLmalloc requires 43.75% fewer nodes than standard memory management techniques to solve an AMG problem.
Date: January 28, 2011
Creator: Biswas, S; de Supinski, B R; Schulz, M; Franklin, D; Sherwood, T & Chong, F T
Partner: UNT Libraries Government Documents Department

Development of An On-Line, Core Power Distribution Monitoring System

Description: The objective of the proposed work was to develop a software package that can construct in three-dimensional core power distributions using the signals from constant temperature power sensors distributed in the reactor core. The software developed uses a mode-based state/parameter estmation technique that is particularly attractive when there are model uncertainties and/or large signal noise. The software yields the expected value of local power at the detector locations and points in between, as well as the probability distribution of the local power density
Date: October 2, 2007
Creator: ALdemir, Tunc; Miller, Don & Wang, Peng
Partner: UNT Libraries Government Documents Department

Advanced Ultra-High Speed Motor for Drilling

Description: Three (3) designs have been made for two sizes, 6.91 cm (2.72 inch) and 4.29 cm (1.69 inch) outer diameters, of a patented inverted configured Permanent Magnet Synchronous Machines (PMSM) electric motor specifically for drilling at ultra-high rotational speeds (10,000 rpm) and that can utilize advanced drilling methods. Benefits of these motors are stackable power sections, full control (speed and direction) of downhole motors, flow hydraulics independent of motor operation, application of advanced drilling methods (water jetting and abrasive slurry jetting), and the ability of signal/power electric wires through motor(s). Key features of the final designed motors are: fixed non-rotating shaft with stator coils attached; rotating housing with permanent magnet (PM) rotor attached; bit attached to rotating housing; internal channel(s) in a nonrotating shaft; electric components that are hydrostatically isolated from high internal pressure circulating fluids ('muds') by static metal to metal seals; liquid filled motor with smoothed features for minimized turbulence in the motor during operation; and new inverted coated metal-metal hydrodynamic bearings and seals. PMSM, Induction and Switched Reluctance Machines (SRM), all pulse modulated, were considered, but PMSM were determined to provide the highest power density for the shortest motors. Both radial and axial electric PMSM driven motors were designed with axial designs deemed more rugged for ultra-high speed, drilling applications. The 6.91 cm (2.72 inch) OD axial inverted motor can generate 4.18KW (5.61 Hp) power at 10,000 rpm with a 4 Nm (2.95 ft-lbs) of torque for every 30.48 cm (12 inches) of power section. The 6.91 cm (2.72 inch) OD radial inverted motor can generate 5.03 KW (6.74 Hp) with 4.8 Nm (3.54 ft-lb) torque at 10,000 rpm for every 30.48 cm (12 inches) of power section. The 4.29 cm (1.69 inch) OD radial inverted motor can generate 2.56 KW (3.43 Hp) power with 2.44 Nm ...
Date: March 31, 2007
Creator: LLC, Impact Technologies & Arlington, University of Texas at
Partner: UNT Libraries Government Documents Department

AIR CONVECTION NOISE OF PENCIL-BEAM INTERFERMETER FOR LONG TRACE PROFILER.

Description: In this work, we investigate the effect of air convection on laser-beam pointing noise essential for the long trace profiler (LTP). We describe this pointing error with noise power density (NPD) frequency distributions. It is shown that the NPD spectra due to air convection have a very characteristic form. In the range of frequencies from {approx}0.05 Hz to {approx}0.5 Hz, the spectra can be modeled with an inverse-power-law function. Depending on the intensity of air convection that is controlled with a resistive heater of 100 to 150 mW along a one-meter-long optical path, the power index lies between 2 and 3 at an overall rms noise of {approx}0.5 to 1 microradian. The efficiency of suppression of the convection noise by blowing air across the beam optical path is also discussed. Air-blowing leads to a white-noise-like spectrum. Air blowing was applied to the reference channel of an LTP allowing demonstration of the contribution of air convection noise to the LTP reference beam. The ability to change (with the blowing technique presented) the spectral characteristics of the beam pointing noise due to air convection allows one to investigate the contribution of the convection effect, and thus make corrections to the power spectral density spectra measured with the LTP.
Date: August 14, 2006
Creator: YASHCHUK, V.V.; IRICK, S.C.; MACDOWELL, A.A.; MCKINNEY, W.R. & TAKACS, P.Z.
Partner: UNT Libraries Government Documents Department

LDRD final report : massive multithreading applied to national infrastructure and informatics.

Description: Large relational datasets such as national-scale social networks and power grids present different computational challenges than do physical simulations. Sandia's distributed-memory supercomputers are well suited for solving problems concerning the latter, but not the former. The reason is that problems such as pattern recognition and knowledge discovery on large networks are dominated by memory latency and not by computation. Furthermore, most memory requests in these applications are very small, and when the datasets are large, most requests miss the cache. The result is extremely low utilization. We are unlikely to be able to grow out of this problem with conventional architectures. As the power density of microprocessors has approached that of a nuclear reactor in the past two years, we have seen a leveling of Moores Law. Building larger and larger microprocessor-based supercomputers is not a solution for informatics and network infrastructure problems since the additional processors are utilized to only a tiny fraction of their capacity. An alternative solution is to use the paradigm of massive multithreading with a large shared memory. There is only one instance of this paradigm today: the Cray MTA-2. The proposal team has unique experience with and access to this machine. The XMT, which is now being delivered, is a Red Storm machine with up to 8192 multithreaded 'Threadstorm' processors and 128 TB of shared memory. For many years, the XMT will be the only way to address very large graph problems efficiently, and future generations of supercomputers will include multithreaded processors. Roughly 10 MTA processor can process a simple short paths problem in the time taken by the Gordon Bell Prize-nominated distributed memory code on 32,000 processors of Blue Gene/Light. We have developed algorithms and open-source software for the XMT, and have modified that software to run some of these algorithms on other ...
Date: September 1, 2009
Creator: Henderson, Bruce A.; Murphy, Richard C.; Wheeler, Kyle; Mackey, Gregory; Berry, Jonathan W.; LaViolette, Randall A. et al.
Partner: UNT Libraries Government Documents Department

An Investigation to Resolve the Interaction Between Fuel Cell, Power Conditioning System and Application Loads

Description: Development of high-performance and durable solidoxide fuel cells (SOFCs) and a SOFC power-generating system requires knowledge of the feedback effects from the power-conditioning electronics and from application-electrical-power circuits that may pass through or excite the power-electronics subsystem (PES). Therefore, it is important to develop analytical models and methodologies, which can be used to investigate and mitigate the effects of the electrical feedbacks from the PES and the application loads (ALs) on the reliability and performance of SOFC systems for stationary and non-stationary applications. However, any such attempt to resolve the electrical impacts of the PES on the SOFC would be incomplete unless one utilizes a comprehensive analysis, which takes into account the interactions of SOFC, PES, balance-of-plant system (BOPS), and ALs as a whole. SOFCs respond quickly to changes in load and exhibit high part- and full-load efficiencies due to its rapid electrochemistry, which is not true for the thermal and mechanical time constants of the BOPS, where load-following time constants are, typically, several orders of magnitude higher. This dichotomy can affect the lifetime and durability of the SOFCSs and limit the applicability of SOFC systems for load-varying stationary and transportation applications. Furthermore, without validated analytical models and investigative design and optimization methodologies, realizations of cost-effective, reliable, and optimal PESs (and power-management controls), in particular, and SOFC systems, in general, are difficult. On the whole, the research effort can lead to (a) cost-constrained optimal PES design for high-performance SOFCS and high energy efficiency and power density, (b) effective SOFC power-system design, analyses, and optimization, and (c) controllers and modulation schemes for mitigation of electrical impacts and wider-stability margin and enhanced system efficiency.
Date: December 31, 2005
Creator: Mazumder, Sudip K.
Partner: UNT Libraries Government Documents Department

Thermodynamic analysis of Thermophotovoltaic Efficiency and Power Density Tradeoffs

Description: This report presents an assessment of the efficiency and power density limitations of thermophotovoltaic (TPV) energy conversion systems for both ideal (radiative-limited) and practical (defect-limited) systems. Thermodynamics is integrated into the unique process physics of TPV conversion, and used to define the intrinsic tradeoff between power density and efficiency. The results of the analysis reveal that the selection of diode bandgap sets a limit on achievable efficiency well below the traditional Carnot level. In addition it is shown that filter performance dominates diode performance in any practical TPV system and determines the optimum bandgap for a given radiator temperature. It is demonstrated that for a given radiator temperature, lower bandgap diodes enable both higher efficiency and power density when spectral control limitations are included. The goal of this work is to provide a better understanding of the basic system limitations that will enable successful long-term development of TPV energy conversion technology.
Date: February 22, 2000
Creator: Baldasara, P.F.; Reynolds, J.E.; Charache, G.W.; DePoy, D.M.; Ballinger, C.T.; Donovan, T. et al.
Partner: UNT Libraries Government Documents Department

PHYSICS OF ELCTRON CYCLOTRON CURRENT DRIVE ON DIII-D

Description: OAK A271 PHYSICS OF ELCTRON CYCLOTRON CURRENT DRIVE ON DIII-D. Recent experiments on the DIII-D tokamak have focused on determining the effect of trapped particles on the electron cyclotron current drive (ECCD) efficiency. The measured ECCD efficiency increases as the deposition location is moved towards the inboard midplane or towards smaller minor radius for both co and counter injection. The measured ECCD efficiency also increases with increasing electron density and/or temperature. The experimental ECCD is compared to both the linear theory (Toray-GA) as well as a quasilinear Fokker-Planck model (CQL3D). The experimental ECCD is found to be in better agreement with the more complete Fokker-Planck calculation, especially for cases of high rf power density and/or loop voltage. The narrow width of the measured ECCD profile is consistent with only low levels of radial transport for the current carrying electrons.
Date: September 1, 2002
Creator: PETTY,CC; PRATER,R; LUCE,TC; ELLIS,RA; HARVEY,RW; KINSEY,JE et al.
Partner: UNT Libraries Government Documents Department

Recent progress in tubular solid oxide fuel cell technology

Description: The tubular design of solid oxide fuel cells (SOFCs) and the materials used therein have been validated by successful, continuous electrical testing over 69,000 h of early technology cells built on a calcia-stabilized zirconia porous support tube (PST). In the latest technology cells, the PST has been eliminated and replaced by a doped lanthanum manganite air electrode tube. These air electrode supported (AES) cells have shown a power density increase of about 33% with a significantly improved performance stability over the previously used PST type cells. These cells have also demonstrated the ability to thermally cycle over 100 times without any mechanical damage or performance loss. In addition, recent changes in processes used to fabricate these cells have resulted in significant cost reduction. This paper reviews the fabrication and performance of the state-of-the-art AES tubular cells. It also describes the materials and processing studies that are underway to further reduce the cell cost, and summarizes the recently built power generation systems that employed state-of-the-art AES cells.
Date: December 31, 1997
Creator: Singhal, S.C.
Partner: UNT Libraries Government Documents Department

The aerocapacitor: An electrochemical double-layer energy-storage device

Description: The authors have applied unique types of carbon foams developed at Lawrence Livermore National Laboratory (LLNL) to make an {open_quotes}aerocapacitor{close_quotes}. The aerocapacitor is a high power-density, high energy-density, electrochemical double-layer capacitor which uses carbon aerogels as electrodes. These electrodes possess very high surface area per unit volume and are electrically continuous in both the carbon and electrolyte phase on a 10 nm scale. Aerogel surface areas range from 100 to 700 m{sup 2}/cc (as measured by BET analysis), with bulk densities of 0.3 to 1.0 g/cc. This morphology permits stored energy to be released rapidly, resulting in high power densities (7.5 kW/kg). Materials parameterization has been performed, and device capacitances of several tens of Farads per gram and per cm{sup 3} of aerogel have been achieved.
Date: October 1, 1997
Creator: Mayer, S.T.; Pekala, R.W. & Kaschmitter, J.L.
Partner: UNT Libraries Government Documents Department

Heat Pipe Integrated Microsystems

Description: The trend in commercial electronics packaging to deliver ever smaller component packaging has enabled the development of new highly integrated modules meeting the demands of the next generation nano satellites. At under ten kilograms, these nano satellites will require both a greater density electronics and a melding of satellite structure and function. Better techniques must be developed to remove the subsequent heat generated by the active components required to-meet future computing requirements. Integration of commercially available electronics must be achieved without the increased costs normally associated with current generation multi chip modules. In this paper we present a method of component integration that uses silicon heat pipe technology and advanced flexible laminate circuit board technology to achieve thermal control and satellite structure. The' electronics/heat pipe stack then becomes an integral component of the spacecraft structure. Thermal management on satellites has always been a problem. The shrinking size of electronics and voltage requirements and the accompanying reduction in power dissipation has helped the situation somewhat. Nevertheless, the demands for increased onboard processing power have resulted in an ever increasing power density within the satellite body. With the introduction of nano satellites, small satellites under ten kilograms and under 1000 cubic inches, the area available on which to place hot components for proper heat dissipation has dwindled dramatically. The resulting satellite has become nearly a solid mass of electronics with nowhere to dissipate heat to space. The silicon heat pipe is attached to an aluminum frame using a thermally conductive epoxy or solder preform. The frame serves three purposes. First, the aluminum frame provides a heat conduction path from the edge of the heat pipe to radiators on the surface of the satellite. Secondly, it serves as an attachment point for extended structures attached to the satellite such as solar panels, radiators, ...
Date: March 30, 1999
Creator: Gass, K.; Robertson, P.J.; Shul, R. & Tigges, C.
Partner: UNT Libraries Government Documents Department

High heat-load absorbers for the APS storage ring

Description: The power density of the dipole x-rays in the 7-GeV APS storage ring is 261 watts/mrad at 300 mA of beam current. An array of absorbers is used in the ring to shield its vacuum chambers and diagnostics components in the path of these intense x-rays. This paper describes some of the unique absorber designs that were developed to handle the requirements of high power density and UHV compatibility with no water-to-vacuum joints.
Date: July 21, 2000
Creator: Sharma, S.; Rotela, E. & Barcikowski, A.
Partner: UNT Libraries Government Documents Department

National Spherical Torus Experiment (NSTX) and Planned Research

Description: The U.S. fusion energy sciences program began in 1996 to increase emphasis on confinement concept innovation. The NSTX [1,2] is being built at PPPL as a national fusion science research facility in response to this emphasis. NSTX is to test fusion science principles of the Spherical Torus (ST) plasmas, which include: (1) High plasma pressure in low magnetic field for high fusion power density, (2) Good energy confinement is a small-size plasma, (3) Nearly fully self-driven (bootstrap) plasma current, (4) Dispersed heat and particle fluxes, and (5) Plasma startup without complicated inboard solenoid magnet. These properties of the ST plasma, if verified, would lead to possible future fusion devices of high fusion performance, small size, feasible power handling, and improved economy. The design of NSTX is depicted in Fig.1. The device is designed to study plasmas with major radius up to 85 cm, minor radius up to 68 cm, elongation up to 2, with flexibility in forming double-null, single-null, and inboard limited plasmas. The nominal operation calls for a toroidal field of 0.3 T for 5 s at the major radius, and a plasma current at 1 MA with q {approximately} 10 at edge. It features a compact center stack containing the inner legs of the toroidal field coils, a full size solenoid capable of delivering 0.6 Wb induction, inboard vacuum vessel, and composite carbon tiles. The center stack can be replaced without disturbing the main device, diagnostics, and auxiliary systems. The vessel will be covered fully with graphite tiles and can be baked to 350 C. Other wall conditioning techniques are also planned.
Date: November 13, 1999
Creator: Kaye, S.; Neumeyer, C.; Ono, M. & Peng, M.
Partner: UNT Libraries Government Documents Department

High-Efficiency, Low-Voltage, Compound Semiconductor Devices for Microwave and MM-Wave Power Amplifiers

Description: Improvements in the last decade in InP materials growth, device processing techniques, characterization, and circuit design have enabled solid-state power performance through 122 GHz. Although originally targeted for low-noise and power performance at mm-wave frequencies (>30 GHz), InP HEMTs could become the preferred device for frequencies as low as 800 MHz. This investment has benefited the microwave frequency regime with higher efficiency and power densities at lower operating voltages. State-of-the-art microwave performance at lower operating voltage provides a path to smaller, lighter-weight systems in the battery operated arena of commercial and defense electronics. This paper describes an InP HEMT technology being investigated for many power and low-noise amplifier applications from UHF to W-band frequencies. Specifically the technology demonstrated 640mW/mm power density, 27 dB gain, and 84% power-added efficiency at L-band with a bias of 3.0 volts. Based on the author's literature search, this is a record efficiency at L-band with an operating voltage of less than 5 volts.
Date: July 14, 1999
Creator: Chao, P.C.; Hietala, V.M.; Kong, W. & Sloan, Lynn R.
Partner: UNT Libraries Government Documents Department

Fusion blanket design and optimization techniques.

Description: In fusion reactors, the blanket design and its characteristics have a major impact on the reactor performance, size, and economics. The selection and arrangement of the blanket materials, dimensions of the different blanket zones, and different requirements of the selected materials for a satisfactory performance are the main parameters, which define the blanket performance. These parameters translate to a large number of variables and design constraints, which need to be simultaneously considered in the blanket design process. This represents a major design challenge because of the lack of a comprehensive design tool capable of considering all these variables to define the optimum blanket design and satisfying all the design constraints for the adopted figure of merit and the blanket design criteria. The blanket design techniques of the First Wall/Blanket/Shield Design and Optimization System (BSDOS) have been developed to overcome this difficulty and to provide the state-of-the-art techniques and tools for performing blanket design and analysis. This report describes some of the BSDOS techniques and demonstrates its use. In addition, the use of the optimization technique of the BSDOS can result in a significant blanket performance enhancement and cost saving for the reactor design under consideration. In this report, examples are presented, which utilize an earlier version of the ITER solid breeder blanket design and a high power density self-cooled lithium blanket design for demonstrating some of the BSDOS blanket design techniques.
Date: July 19, 2005
Creator: Gohar, Y.
Partner: UNT Libraries Government Documents Department