325 Matching Results

Search Results

Advanced search parameters have been applied.

Portable 3-D computed tomography system

Description: Through a Cooperative Research and Development Agreement between Los Alamos National Laboratory and HYTEC, Inc., a portable 3-D Computed Tomography (CT) system has been developed that dramatically reduces the overall complexity and time-to-completion for performing CT studies. The system incorporates an amorphous silicon flat-panel detector, coupled motion control and state of the art software to produce high quality CT results. All alignment, image calibration and radiation exposure monitoring is handled in software, thereby, eliminating the need for precise mechanical positioning during setup or a highly stable source of radiation. The image acquisition hardware occupies a minimal 30-inch x 48-inch footprint and is mounted on a portable cart for transportation between multiple X-ray sites. The software is built on the Windows NT/2K operating system for maximum flexibility in today's industry, and offers an unprecedented user interface designed for technicians and operators who have minimal computer training. Multiple reconstruction methods (parallel, fan and cone beam) are provided and can be run in a parallel-processed mode on any number of Windows NT/2K computers to decrease reconstruction time. Visualization software offers 2-D and 3-D viewing including slice animation and volume rendering of entire objects.
Date: June 1, 2001
Creator: Phillips, D. H. (David H.); Davis, A. W. (Anthony W.); Keating, S. C. (Scott C.) & Claytor, T. N. (Thomas N.)
Partner: UNT Libraries Government Documents Department

Prototype Weigh-In-Motion Performance

Description: Oak Ridge National Laboratory (ORNL) has developed and patented methods to weigh slowly moving vehicles. We have used this technology to produce a portable weigh-in-motion system that is robust and accurate. This report documents the performance of the second-generation portable weigh-in-motion prototype (WIM Gen II). The results of three modes of weight determination are compared in this report: WIM Gen II dynamic mode, WIM Gen II stop-and-go mode, and static (parked) mode on in-ground, static scales. The WIM dynamic mode measures axle weights as the vehicle passes over the system at speeds of 3 to 7 miles per hour (1.3 to 3.1 meters/second). The WIM stop-and-go mode measures the weight of each axle of the vehicle as the axles are successively positioned on a side-by-side pair of WIM measurement pads. In both measurement modes the center of balance (CB) and the total weight are obtained by a straight-forward calculation from axle weights and axle spacings. The performance metric is measurement error (in percent), which is defined as 100 x (sample standard deviation)/(average); see Appendix A for details. We have insufficient data to show that this metric is predictive. This report details the results of weight measurements performed in May 2005 at two sites using different types of vehicles at each site. In addition to the weight measurements, the testing enabled refinements to the test methodology and facilitated an assessment of the influence of vehicle speed on the dynamic-mode measurements. The initial test at the National Transportation Research Center in Knoxville, TN, involved measurements of passenger and light-duty commercial vehicles. A subsequent test at the Arrival/Departure Airfield Control Group (A/DACG) facility in Ft. Bragg, NC, involved military vehicles with gross weights between 3,000 and 75,000 pounds (1,356 to 33,900 kilograms) with a 20,000-pound (9,040 kilograms) limit per axle. For each vehicle, ...
Date: October 1, 2006
Creator: Abercrombie, Robert K; Beshears, David L; Hively, Lee M; Scudiere, Matthew B & Sheldon, Frederick T
Partner: UNT Libraries Government Documents Department

Solenoid and monocusp ion source

Description: An ion source which generates ions having high atomic purity incorporates a solenoidal magnetic field to increase the electron path length. In a sealed envelope, electrons emitted from a cathode traverse the magnetic field lines of a solenoid and a monocusp magnet between the cathode and a reflector at the monocusp. As electrons collide with gas, the molecular gas forms a plasma. An anode grazes the outer boundary of the plasma. Molecular ions and high energy electrons remain substantially on the cathode side of the cusp, but as the ions and electrons are scattered to the aperture side of the cusp, additional collisions create atomic ions. The increased electron path length allows for smaller diameters and lower operating pressures.
Date: December 31, 1995
Creator: Brainard, J.P.; Burns, E.J.T. & Draper, C.H.
Partner: UNT Libraries Government Documents Department

Development of a hand-portable photoionization time-of-flight mass spectrometer

Description: ANL is currently developing a portable chemical sensor system based on laser desorption photoionization time-of-flight mass spectrometry. It will incorporate direct sampling, a cryocooler base sample adsorption and concentration, and direct surface multiphoton ionization. All components will be in a package 9 x 11 x 4 in., weighing 15-18 lbs. A sample spectrum is given for a NaCl sample.
Date: June 1996
Creator: Dieckman, S. L.; Bostrom, G. A.; Waterfield, L. G.; Jendrzejczyk, J. A. & Raptis, A. C.
Partner: UNT Libraries Government Documents Department

Out-of-tank evaporator demonstration: Tanks focus area

Description: Approximately 100 million gal of liquid waste is stored in underground storage tanks (UST)s at the Hanford Site, Idaho National Engineering and Environmental Laboratory (INEEL), Savannah River Site (SRS), and Oak Ridge Reservation (ORR). This waste is radioactive with a high salt content. The US Department of Energy (DOE) wants to minimize the volume of radioactive liquid waste in USTs by removing the excess water. This procedure conserves tank space; lowers the cost of storage; and reduces the volume of wastes subsequently requiring separation, immobilization, and disposal. The Out-of-Tank Evaporator Demonstration (OTED) was initiated to test a modular, skid-mounted evaporator. A mobile evaporator system manufactured by Delta Thermal Inc. was selected. The evaporator design was routinely used in commercial applications such as concentrating metal-plating wastes for recycle and concentrating ethylene glycol solutions. In FY 1995, the skid-mounted evaporator system was procured and installed in an existing ORNL facility (Building 7877) with temporary shielding and remote controls. The evaporator system was operational in January 1996. The system operated 24 h/day and processed 22,000 gal of Melton Valley Storage Tank (MVST) supernatant. The distillate contained essentially no salts or radionuclides. Upon completion of the demonstration, the evaporator underwent decontamination testing to illustrate the feasibility of hands-on maintenance and potential transport to another DOE facility. This report describes the process and the evaporator, its performance at ORNL, future plans, applications of this technology, cost estimates, regulatory and policy considerations, and lessons learned.
Date: November 1, 1998
Partner: UNT Libraries Government Documents Department

Field analysis of mercury in water, sediment and soil using static headspace analysis

Description: We developed a field screening method for rapid analysis of Hg in water, soil, and sediment, which can be applied cost-effectively at Hg-contaminated sites. Samples are chemically pretreated in ordinary containers, followed by analysis of the sample headspace Hg vapor using a portable commercial analyzer. Hg in water samples is reduced directly by the addition of stannous chloride, while solids are first digested with aqua regia or piranha solution to liberate the Hg from the solids. Aided by vigorous agitation after adding the reductant, the elemental Hg partitions between solution and headspace according to Henry`s Law. The method requires about 2 and 15 minutes to complete for water and solids, respectively. The method provides very useful detection limits for water (0.1 {mu}g/L) and solids (2-3{mu}g/g). Intercomparisons with laboratory-analyzed environmental samples show good agreement.
Date: December 31, 1994
Creator: Kriger, A.A. & Turner, R.R.
Partner: UNT Libraries Government Documents Department

Thermoacoustic natural gas liquefier

Description: This is the final report of a two-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). This project sought to develop a natural-gas-powered natural-gas liquefier that has absolutely no moving parts and requires no electrical power. It should have high efficiency, remarkable reliability, and low cost. The thermoacoustic natural-gas liquefier (TANGL) is based on our recent invention of the first no-moving-parts cryogenic refrigerator. In short, our invention uses acoustic phenomena to produce refrigeration from heat, with no moving parts. The required apparatus comprises nothing more than heat exchangers and pipes, made of common materials, without exacting tolerances. Its initial experimental success in a small size lead us to propose a more ambitious application: large-energy liquefaction of natural gas, using combustion of natural gas as the energy source. TANGL was designed to be maintenance-free, inexpensive, portable, and environmentally benign.
Date: July 1, 1996
Creator: Swift, G.; Gardner, D.; Hayden, M.; Radebaugh, R. & Wollan, J.
Partner: UNT Libraries Government Documents Department

Road transportable analytical laboratory (RTAL) system. Quarterly report, August--October 1995

Description: Goal is the development and demonstration of a system to meet DOE needs for rapid, accurate analysis of a wide variety of hazardous and radioactive contaminants in soil, groundwater, and surface waters. The system consists of a set of individual laboratory modules. This report documents progress on Phase II, which is a transition to Maturity Level 5, Full-Scale Demonstration.
Date: November 1, 1995
Partner: UNT Libraries Government Documents Department

Air-breathing fuel cell stacks for portable power applications

Description: Increasing attention is being directed towards polymer electrolyte fuel cells as battery replacements because of their potentially superior energy densities and the possibility of `mechanical` refueling. On the low end of the power requirement scale (ca. 10 W), fuel cells can compete with primary and secondary batteries only if the fuel cell systems are simple, inexpensive, and reliable. Considerations of cost and simplicity (and minimal parasitic power) discourage the use of conventional performance enhancing subsystems (e.g., humidification, cooling, or forced-reactant flow). We are developing a stack design that is inherently self-regulating to allow effective operation without the benefit of such auxiliary components. The air cathode does not use forced flow to replenish the depleted oxygen. Instead, the oxygen in the air must diffuse into the stack from the periphery of the unit cells. For this reason the stack is described as `air-breathing.` This configuration limits the ability of water to escape which prevents the polymer electrolyte membranes from drying out, even at relatively high continuous operation temperatures (+60 degrees C). This results in stacks with reliable and stable performance. This air-breathing configuration assumes a unique stack geometry that utilizes circular flow-field plates with an annular hydrogen feed manifold and the single tie-bolt extending up through the central axis of the stack. With this geometry, the hydrogen supply to the unit cells is radially outward, and the air supply is from the periphery inward. This configuration has several advantages. The entire periphery is free to air access and allows greater heat conduction to enhance cooling. Furthermore, all of the components in the stack (e.g., the flow-fields, seals and membrane/electrode assemblies), are radially symmetrical, so part fabrication is simple and the entire system is potentially low-cost. Lastly, this configuration is compact and lightweight.
Date: October 1, 1996
Creator: Wilson, M.S.; DeCaro, D.; Neutzler, J.K.; Zawodzinski, C. & Gottesfeld, S.
Partner: UNT Libraries Government Documents Department

Multiple Input Microcantilever Sensor with Capacitive Readout

Description: A surface-micromachined MEMS process has been used to demonstrate multiple-input chemical sensing using selectively coated cantilever arrays. Combined hydrogen and mercury-vapor detection was achieved with a palm-sized, self-powered module with spread-spectrum telemetry reporting.
Date: March 11, 1999
Creator: Britton, C.L., Jr.; Brown, G.M.; Bryan, W.L.; Clonts, L.G.; DePriest, J.C.; Emergy, M.S. et al.
Partner: UNT Libraries Government Documents Department

A portable gamma-ray spectrometer using compressed xenon

Description: An ionization chamber using compressed xenon has been designed and built for gamma-ray spectrometry. The device is based on signal measurement from a parallel plate detector, with the gas enclosure constructed specifically for packaging into a portable instrument; thus, appropriate engineering practices comprises two small containers that can be setup for operation in just a few minutes. Its sensitivity is 100 keV to over 1 MeV, with a resolution at 662 keV of 2.5% FWHM for uniform irradiation, and 2% FWHM for collimated irradiation, comparable to the best ever with compressed xenon. It also exhibits greater specificity that most scintillators, such as NaI. The device is insensitive to neutron damage and has a low power requirement.
Date: October 1, 1997
Creator: Mahler, G.J.; Yu, B.; Smith, G.C.; Kane, W.R. & Lemley, J.R.
Partner: UNT Libraries Government Documents Department

Design and performance of a vacuum-bottle solid-state calorimeter

Description: EG and G Mound Applied Technologies calorimetry personnel have developed a small, thermos-bottle solid-state calorimeter, which is now undergoing performance testing at Los Alamos National Laboratory. The thermos-bottle solid-state calorimeter is an evaluation prototype for characterizing the heat output of small heat standards and other homogeneous heat sources. The current maximum sample size is 3.5 in. long with a diameter of 0.8 in. The overall size of the thermos bottle and thermoelectric cooling device is 9.25 in. high by 3.75 in. diameter and less than 3 lb. Coupling this unit with compact electronics and a laptop computer makes this calorimeter easily hand carried by a single individual. This compactness was achieved by servo controlling the reference temperature below room temperature and replacing the water bath used in conventional calorimeter design with the thermos-bottle insulator. Other design features will also be discussed. The performance of the calorimeter will be presented.
Date: November 1, 1997
Creator: Bracken, D.S.; Biddle, R. & Cech, R.
Partner: UNT Libraries Government Documents Department

LLNL`s acoustic spectrometer

Description: This paper describes the development of a frequency sensitive acoustic transducer that operates in the 10 Hz to 10 kHz regime. This device uses modem silicon microfabrication techniques to form mechanical tines that resonate at specified frequencies. This high-sensitivity device is intended for low-power battery powered applications.
Date: March 17, 1997
Creator: Baker, J.
Partner: UNT Libraries Government Documents Department

High performance hand-held gas chromatograph

Description: The Microtechnology Center of Lawrence Livermore National Laboratory has developed a high performance hand-held, real time detection gas chromatograph (HHGC) by Micro-Electro-Mechanical-System (MEMS) technology. The total weight of this hand-held gas chromatograph is about five lbs., with a physical size of 8{close_quotes} x 5{close_quotes} x 3{close_quotes} including carrier gas and battery. It consumes about 12 watts of electrical power with a response time on the order of one to two minutes. This HHGC has an average effective theoretical plate of about 40k. Presently, its sensitivity is limited by its thermal sensitive detector at PPM. Like a conventional G.C., this HHGC consists mainly of three major components: (1) the sample injector, (2) the column, and (3) the detector with related electronics. The present HHGC injector is a modified version of the conventional injector. Its separation column is fabricated completely on silicon wafers by means of MEMS technology. This separation column has a circular cross section with a diameter of 100 pm. The detector developed for this hand-held GC is a thermal conductivity detector fabricated on a silicon nitride window by MEMS technology. A normal Wheatstone bridge is used. The signal is fed into a PC and displayed through LabView software.
Date: April 28, 1998
Creator: Yu, C.M.
Partner: UNT Libraries Government Documents Department

Nonradioactive Air Emissions Notice of Construction use on a portable exhauster on 241-A-101 tank during salt well pumping

Description: The 241-A-101 tank, a 22.9 meter 3,785,400 liter capacity SST, was constructed from the fourth generation of tank designs, which were capable of holding boiling or self-concentrating waste. Construction features a reinforced concrete shell, dome, and base with a mild steel liner covering the bottom and sidewalls. The tank has a flat bottom with a usable waste depth of approximately 9.4 meters. The tank was put into service in 1956 to store plutonium-uranium extraction (PUREX) high-level waste and organic wash waste. The waste was allowed to self-concentrate up until 1968. Tank sluicing was performed in 1969 and again in 1976 to reduce the amount of strontium and cesium, the two isotopes found to be the main heat generating sources in the tank. In 1978, the tank was reassigned for saltcake storage. The tank was taken out of service in November 1980 and partially isolated in 1982. Salt well pumping is a method used to interim stabilize SSTS. Interim stabilization is commenced once all the liquid above the solids has been removed (primary stabilization). Interim stabilization removes the gravity drainable liquid and the interstitial liquid between the solids from the SST and transfers the liquid to a double-shell tank (DST) or to a staging double-contained receiver tank (DCRT), which is subsequently transferred to a DST. Pumping is accomplished at very low flow rates, 15.1 liters per minute or less. Normally, salt well pumping is performed without the need of an exhauster. However, recent safety evaluations concluded that a minimum exhaust flow rate of 7.1 cubic meters per minute would be required to enhance the safety of the tank. Therefore, active ventilation will be part of this process for the 241-A-101 tank. This document details the Nonradioactive Air Emissions Notice of Construction for the use of a portable exhauster on Tank 241-A-101 ...
Date: April 17, 1996
Creator: Hays, C.B.
Partner: UNT Libraries Government Documents Department

Computer aided differential diagnosis in emergency situations (CADDIES) system

Description: This report presents an idea for a portable computerized differential diagnosis tool that could be utilized by a health care provider during an emergency situation. This radio frequency, networked, menu driven system would analyze various patient assessment parameters and make recommendations regarding possible diagnoses/treatment options outside the scope of suspicion of the health care provider. This system would serve as a repository for initial epidemiological data and assist the health care provider with spotting emerging trends.
Date: March 1, 2000
Creator: NOEL,WILLIAM P.
Partner: UNT Libraries Government Documents Department

Compact cyclone filter train for radiological and hazardous environments

Description: A compact cyclone filter train is described for the removal of hazardous and radiological particles from a gaseous fluid medium which permits a small cyclone separator to be used in a very small space envelope due to the arrangement of the filter housing adjacent to the separator with the cyclone separators and the filters mounted on a plate. The entire unit will have a hoist connection at the center of gravity so that the entire unit including the separator, the filters, and the base can be lifted and repositioned as desired.
Date: December 31, 1996
Creator: Bench, T. R.
Partner: UNT Libraries Government Documents Department

Development of a portable preconcentrator/ion mobility spectrometer system for the trace detection of narcotics

Description: This project was supported by LDRD funding for the development and preliminary testing of a portable narcotics detection system. The system developed combines a commercial trace detector known as an ion mobility spectrometer (IMS) with a preconcentrator originally designed by Department 5848 for the collection of explosives molecules. The detector and preconcentrator were combined along with all necessary accessories onto a push cart, thus yielding a fully portable detection unit. Preliminary testing with both explosives and narcotics molecules shown that the system is operational, and that it can successfully detect drugs as marijuana, methamphetamine (speed), and cocaine based on their characteristics IMS signatures.
Date: August 1, 1997
Creator: Parmeter, J.E. & Custer, C.A.
Partner: UNT Libraries Government Documents Department

PowerCore{trademark}, NiMH production prototype for portable electronics. Quarterly report R02

Description: The objective of this project is to build a production prototype of Power Core structural battery for applications as a hard case for portable electronic devices. The reports summarizes the work completed since the last report. It briefly describes the problems that were experienced. It also gives details of progress versus statement of work task definitions.
Date: January 30, 1998
Creator: Lyman, P.C.
Partner: UNT Libraries Government Documents Department

Algorithms for a hand-held miniature x-ray fluorescence analytical instrument

Description: The purpose of this joint program was to provide technical assistance with the development of a Miniature X-ray Fluorescence (XRF) Analytical Instrument. This new XRF instrument is designed to overcome the weaknesses of spectrometers commercially available at the present time. Currently available XRF spectrometers (for a complete list see reference 1) convert spectral information to sample composition using the influence coefficients technique or the fundamental parameters method. They require either a standard sample with composition relatively close to the unknown or a detailed knowledge of the sample matrix. They also require a highly-trained operator and the results often depend on the capabilities of the operator. In addition, almost all existing field-portable, hand-held instruments use radioactive sources for excitation. Regulatory limits on such sources restrict them such that they can only provide relatively weak excitation. This limits all current hand-held XRF instruments to poor detection limits and/or long data collection times, in addition to the licensing requirements and disposal problems for radioactive sources. The new XRF instrument was developed jointly by Quantrad Sensor, Inc., the Naval Research Laboratory (NRL), and the Department of Energy (DOE). This report describes the analysis algorithms developed by NRL for the new instrument and the software which embodies them.
Date: December 31, 1998
Creator: Elam, W.T.; Newman, D. & Ziemba, F.
Partner: UNT Libraries Government Documents Department

Testing of the small sample (new concept) calorimeter received from EG&G Mound Applied Technology

Description: The Small Sample calorimeter, also known as the New Concepts calorimeter, has undergone testing in the transfer of the calorimeter operations to Los Alamos National Laboratory from EG&G Mound Applied Technology (Mound), Miamisburg, Ohio, in September 1996. The design of the calorimeter incorporated several new concepts, thus the name New Concepts. The normal water bath was replaced with a small self-contained bath and control that used a thermal electric cooling/heating device to supply the control for the bath temperature. This change replaces the large refrigeration unit that has been used in the past, thus reducing the weight and the power required to operate the system. The design was done to allow the complete calorimeter system to be contained in a single electronics rack. With the new electronics package, this change would allow the unit to use a short electronics rack with a laptop computer and make the complete system transportable. By reducing the amount of water in the bath, the control and size of the bath could also be reduced. By making the bath self-contained and sealed, there would be no need to replace water or supply de-ionized water for the system. This change would remove some of the concerns about using a water bath in certain situations. The water would be about 5 gal. or less depending on the size of the calorimeter. The present system is a 5 in. diameter sample chamber system which can accept most older material now in storage. It will not handle the new 3013 size container as built but could be easily designed for that size. There is also a new sensor design that takes less wire and can eliminate the constant current source used in past Mound calorimeter designs. With the new digital voltmeters, the complete system could be run from a ...
Date: December 31, 1998
Creator: Cech, R.; Craft, M. & Fultz, R.
Partner: UNT Libraries Government Documents Department

Portable data acquisition system

Description: Lawrence Livermore National Laboratory (LLNL) has developed a Portable Data Acquisition (DAQ) System that is basically a laboratory-scale of Program Logic Control (PLC). This DAQ system can obtain signals from numerous sensors (e.g., pH, level, pressure, flow meters), open and close valves, and turn on and off pumps. The data can then be saved on a spreadsheet or displayed as a graph/indicator in real-time on a computer screen. The whole DAQ system was designed to be portable so that it could sit on a bench top during laboratory-scale treatability studies, or moved out into the field during larger studies. This DAQ system is also fairly simple to use. All that is required is some working knowledge of LabVIEW 4.1, and how to properly wire the process equipment. The DAQ system has been used during treatability studies on cesium precipitation, controlled hydrolysis of water- reactive wastes, and other waste treatment studies that enable LLNL to comply with the Federal Facility Compliance Act (FFCAct). Improved data acquisition allows the study to be better monitored, and therefore better controlled, and can be used to determine the results of the treatment study more effectively. This also contributes to the design of larger treatment processes.
Date: May 3, 1999
Creator: Bowers, J & Rogers, H
Partner: UNT Libraries Government Documents Department

Instrumentation for high-efficiency, high-sensitivity actinide analysis

Description: This is the final report of a 3-year project. We have developed a high-efficiency thermal ionization source that provides one to two orders of magnitude improvement in sample utilization efficiency in comparison with the traditional filament-type ion source currently used in thermal ionization mass spectrometry. This improved sample utilization efficiency results in a proportional increase in sample throughput and proportional decrease in analysis time. Coupling this source with a quadrupole mass spectrometer results in an instrument system for high-efficiency actinide analysis and other applications. In addition to its high efficiency, the sample used in this source can be much smaller than that in previous tube-type sources. The compact structure of the cavity makes it more applicable to any type of mass spectrometer and the whole instrument is small and transportable.
Date: April 1, 1996
Creator: Olivares, J.; Chamberlin, E.; Murrell, M.; Kahr, M. & Duan, Y.
Partner: UNT Libraries Government Documents Department