180 Matching Results

Search Results

Advanced search parameters have been applied.

Stress Isotherms of Porous Thin Materials: Theoretical Predictitions From a Nonlocal Density Functional Theory

Description: Recent beam bending (BB) experiments of microporous t31rns with very small pores have shown that the fluid confined in these pores exhibits monotonic compressive stresses as the relative pressure is varied from vacuum to saturation (relative vapor pressure, p/p. = 1). The variation of the stress near saturation is found to be linear in hz(p) and given by the saturated liquid density to within 20%. Capillary condensed fluids are traditionally described by the Laplace-Kelvin (LK) theory. LK theory correctly predicts the slope of the stress near saturation to be pl, but also predicts that the stress should be zero at saturation and tensile between saturation aud the capillary transition pressure. Hence LK theory does not capture the monotonic compressive stress observed in BB experiments. This report describes the results of density functional theory calculations for a simple fluid continued to a slit pore network. We show how the presence of even a small amount of polydispersity in pore size leads to both a monotonic compressive stress as well as the observed LK slope.
Date: November 11, 1998
Creator: Frink, L.J.D. & van Swol, F.
Partner: UNT Libraries Government Documents Department

Final Report, DE-FG02-92ER14261, Pore Scale Geometric and Fluid Distribution Analysis

Description: The elucidation of the relationship between pore scale structure and fluid flow in porous media is a fundamental problem of long standing interest. Incomplete characterization of medium properties continues to be a limiting factor in accurate field scale simulations. The accomplishments of this grant have kept us at the forefront in investigating the applicability of X-ray computed microtomography (XCMT) as a tool for contributing to the understanding of this relationship. Specific accomplishments have been achieved in four areas: - development of numerical algorithms (largely in the field of computational geometry) to provide automated recognition of and measurements on features of interest in the pore space. These algorithms have been embodied in a software package, 3DMA-Rock. - application of these algorithms to extensive studies of the pore space of sandstones. - application of these algorithms to studies of fluid (oil/water) partitioning in the pore space of Berea sandstone and polyethylene models. - technology transfer.
Date: January 21, 2005
Creator: Lindquist, W. Brent
Partner: UNT Libraries Government Documents Department

Magnetic relaxation - coal swelling, extraction, pore size. Final technical report

Description: The aim of the contract was to employ electron and nuclear magnetic relaxation techniques to investigate solvent swelling of coals, solvent extraction of coals and molecular interaction with solvent coal pores. Many of these investigations have appeared in four major publications and a conference proceedings. Another manuscript has been submitted for publication. The set of Argonne Premium Coals was chosen as extensively characterized and representative samples for this project.
Date: October 26, 1994
Creator: Doetschman, D.C.
Partner: UNT Libraries Government Documents Department

Preparation of microporous films with sub nanometer pores and their characterization using stress and FTIR measurements

Description: The authors have used a novel technique, measurement of stress isotherms in microporous thin films, as a means of characterizing porosity. The stress measurement was carried out by applying sol-gel thin films on a thin silicon substrate and monitoring the curvature of the substrate under a controlled atmosphere of various vapors. The magnitude of macroscopic bending stress developed in microporous films depends on the relative pressure and molar volume of the adsorbate and reaches a value of 180 MPa for a relative vapor pressure, P/Po = 0.001, of methanol. By using a series of molecules, and observing both the magnitude and the kinetics of stress development while changing the relative pressure, they have determined the pore size of microporous thin films. FTIR measurements were used to acquire adsorption isotherms and to compare pore emptying to stress development, about 80% of the change in stress takes place with no measurable change in the amount adsorbed. The authors show that for sol-gel films, pore diameters can be controlled in the range of 5--8 {angstrom} by ``solvent templating``.
Date: June 1, 1996
Creator: Samuel, J.; Hurd, A.J.; Swoll, F. van; Frink, L.J.D.; Contakes, S.C. & Brinker, C.J.
Partner: UNT Libraries Government Documents Department

Periodic mesoporous silica gels

Description: We have synthesized monolithic particulate gels of periodic mesoporous silica by adding tetramethoxysilane to a homogeneous alkaline micellar precursor solution. The gels exhibit 5 characteristic length scales over 4 orders of magnitude: fractal domains larger than the particle size (>500 nm), particles that are {approximately}150 to 500 nm in diameter, interparticle pores that are on the order of the particle size, a feature in the gas adsorption measurements that indicates pores {approximately}10-50 nm, and periodic hexagonal arrays of {approximately}3 nm channels within each particle. The wet gel monoliths exhibit calculated densities as low as {approximately}0.02 g/cc; the dried and calcined gels have bulk densities that range from {approximately}0.3-0.5 g/cc. The materials possess large interparticle ({approximately}1.0-2.3 cc/g) and intraparticle ({approximately}0.6 cc/g) porosities.
Date: June 1, 1996
Creator: Anderson, M.T.; Martin, J.E. & Odinek, J.G.
Partner: UNT Libraries Government Documents Department

A Silicon, Carbon and Deuterium NMR Investigation of Molecular Templating in Amorphous Silicas

Description: The precise pore sizes defined by crystalline zeolite lattices have led to intensive research on zeolite membranes. Unfortunately zeolites have proven to be extremely difficult to prepare in a defect-free thin film form needed for membrane flux and selectivity. We introduce tetrapropylammonium TPA (a structure directing agent for zeolite ZSM-5) into a silica sol and exploit the development of high solvation stresses to create templated amorphous silicas with pore apertures comparable in size to those of ZSM-5. {sup 29}Si and {sup 2}H NMR experiments were performed to evaluate the efficacy of our templating approach. The {sup 29}Si NMR spectrum of the silica matrix was observed by an intermolecular cross-polarization experiment between the {sup 1}H nuclei of TPA and the {sup 29}Si nuclei in the silica matrix. The efficiency of the cross-polarization interaction was used to investigate the degree to which the matrix formed a tight cage surrounding the template molecule. Normally prepared xerogel materials exhibited only weak interactions between the two sets of nuclei. Drying under reduced pressure, where solvation stresses are maximized, resulted in significantly increased interactions. Analogous materials were prepared using fully deuterated TPA. The {sup 2}H NMR wideline spectra consisted of a partially narrowed resonance, corresponding to template molecules which were undergoing restricted rotational motion, and an isotropically narrowed resonance, corresponding to molecules which were undergoing rapid rotational motion. The number of isotropically rotating template molecules decreased for specimens dried under reduced pressure, consistent with improved templating of amorphous silica by TPA.
Date: April 8, 1999
Creator: Alam, T.M,; Assink, R.A.; Brinker, C.J.; Click, C.A. & Naik, S.J.
Partner: UNT Libraries Government Documents Department

Engineered monodisperse mesoporous materials

Description: Porous materials technology has developed products with a wide variety of pore sizes ranging from 1 angstrom to 100`s of microns and beyond. Beyond 15{angstrom} it becomes difficult to obtain well ordered, monodisperse pores. In this report the authors describe efforts in making novel porous material having monodisperse, controllable pore sizes spanning the mesoporous range (20--500 {angstrom}). They set forth to achieve this by using unique properties associated with block copolymers--two linear homopolymers attached at their ends. Block copolymers phase separate into monodisperse mesophases. They desired to selectively remove one of the phases and leave the other behind, giving the uniform monodisperse pores. To try to achieve this the authors used ring-opening metathesis polymerization to make the block copolymers. They synthesized a wide variety of monomers and surveyed their polymers by TGA, with the idea that one phase could be made thermally labile while the other phase would be thermally stable. In the precipitated and sol-gel processed materials, they determined by porosimetry measurements that micropores, mesopores, and macropores were created. In the film processed sample there was not much porosity present. They moved to a new system that required much lower thermal treatments to thermally remove over 90% of the labile phase. Film casting followed by thermal treatment and solvent extraction produced the desired monodisperse materials (based solely on SEM results). Modeling using Density Functional Theory was also incorporated into this project. The modeling was able to predict accurately the domain size and spacing vs. molecular weight for a model system, as well as accurate interfacial thicknesses.
Date: August 1, 1997
Creator: Saunders, R.S.; Small, J.H.; Lagasse, R.R.; Schroeder, J.L. & Jamison, G.M.
Partner: UNT Libraries Government Documents Department

Structural evolution of carbon during oxidation. Final report

Description: The examination of the structural evolution of carbon during oxidation has proven to be of scientific interest. Early modeling work of fluidized bed combustion showed that most of the reactions of interest occurs in the micropores, and this work has concentrated on these pores. This work has concentrated on evolution of macroporosity and microporosity of carbons during kinetic controlled oxidation using SAXS, CO{sub 2} and TEM analysis. Simple studies of fluidized bed combustion of coal chars has shown that many of the events considered fragmentation events previously may in fact be {open_quotes}hidden{close_quotes} or nonaccessible porosity. This makes the study of the microporous combustion characteristics of carbon even more important. The generation of a combustion resistant grid, coupled with measurements of the SAXS and CO{sub 2} surface areas, fractal analysis and TEM. Studies has confirmed that soot particles shrink during their oxidation, as previously suspected. However, this shrinkage results in an overall change in structure. This structure becomes, on a radial basis, much more ordered near the edges, while the center itself becomes transparent to the TEM beam, implying a total lack of structure in this region. Although complex, this carbon structure is probably burning as to keep the density of the soot particles nearly the same. The TEM techniques developed for examination of soots has also been applied to Spherocarb. The Spherocarb during oxidation also increases its ordering. This ordering, by present theories, would imply that the reactivity would go. However, the reactivity goes up, implying that structure of carbon is secondary in importance to catalytic effects.
Date: April 1, 1998
Creator: Sarofim, A.F.
Partner: UNT Libraries Government Documents Department

TEPIC -- A new high temperature structural foam

Description: The formulation, processing characteristics, microstructure and mechanical properties of a new structural foam, suitable for use at service temperatures up to 200 C, are reported. In each of these respects, the foam is compared to an existing material, called APO-BMI that is currently in use. When these two foams are directly compared, the new foam, called TEPIC, is found to be superior in its mechanical performance. TEPIC is formulated from a non-carcinogenic isocyanate, a di-functional epoxide, and glass microballoons. The authors' approach was to combine chemistries known to form thermally stable products. The principal polymerization products are an oxizolidinone produced by the reaction of the isocyanate with the epoxide and isocyanurate rings formed by the trimerization of the isocyanate. Processing has been examined and large-scale production is discussed in detail. Compared to APO-BMI processing, TEPIC processing is facile and economical. The structure of the foam resembles a traditional rigid polyurethane foam rather than that of the APO-BMI. That is, the foam is comprised of a continuous resin phase rather than weakly bonded glass microballoons. At a density of 0.42 g/cm{sup 3} or greater, maximum pore size in TEPIC was less than 2 mm, as required for the application.
Date: October 1, 1998
Creator: Whinnery, L. L.; Goods, S. H.; Tootle, M. L. & Neuschwanger, C. L.
Partner: UNT Libraries Government Documents Department

Quantitative assessment of pore development at Al2O3/FeAl interfaces during high temperature oxidation

Description: Alloys of commercial grades that do not contain a reactive element, such as yttrium, often develop pores at the scale/alloy interface. The accumulation and growth of these pores greatly weaken scale adhesion. The purpose of this study is to evaluate pore development in Fe-40at% Al and determine the change in pore volume with oxidation time. Experimental results are then compared to a theoretical calculation where all vacancies are allowed to condense as voids. After removing the oxide scales that formed after various times of oxidation at 1000 C in oxygen, the alloy surface was analyzed using scanning electron microscopy (SEM) and atomic force microscopy (AFM) to determine the size and depth of interfacial pores. Results are discussed in light of possible mechanisms involved in pore formation at scale/alloy interfaces.
Date: April 24, 2001
Creator: Hou, Peggy Y.; Van Leiden, C.; Niu, Y. & Gesmundo, F.
Partner: UNT Libraries Government Documents Department

Mechanisms and optimization of coal combustion. Semiannual report, November 1, 1998--April 30, 1999

Description: The effects of process conditions on the reactivity of Illinois No.6 coal in the kinetic and diffusion control regime were studied using new sequential combustion procedures. Reactivity patterns in the kinetic controlled regime were not influenced by the pyrolysis heating rates. Results presented in the previous DOE report have shown, however, that combustion rates were significantly affected by the pyrolysis heating rates at reaction temperatures higher than 550 C. These results establish the importance of the macropore structure of chars in determining their combustion rates under conditions leading to significant intraparticle diffusional limitations.
Date: December 1, 1999
Creator: Zygourakis, K.
Partner: UNT Libraries Government Documents Department

Combustion synthesis and effects of processing parameters on physical properties of {alpha}-alumina

Description: Fine particle porous {alpha}-alumina has been prepared by a wet chemical method of combustion synthesis using an aqueous precursor containing aluminum nitrate (oxidizer) and carbohydrazide, an organic fuel as starting materials. The aluminum nitrate and carbohydrazide were reacted exothermically at 400--600 C. The synthesis of {alpha}-alumina ({alpha}-Al{sub 2}O{sub 3}) was used as a model for understanding the effects of processing parameters on physical properties such as surface area, average pore size, and residual carbon content. The porous powders were characterized using x-ray diffraction (XRD), scanning electron microscopy (SEM), BET surface area analysis and elemental analysis. The decomposition of the starting materials was investigated using differential thermal and thermogravimetric analyses (DTA/TGA). It has been shown that the furnace temperature, fuel/oxidizer ratio, and precursor water content can be tailored to produce powders with different physical properties.
Date: January 4, 2000
Creator: Collins, M.V.; Hirschfeld, D.A. & Shea, L.E.
Partner: UNT Libraries Government Documents Department

Microporous Silica Prepared by Organic Templating: Relationship Between the Molecular Template and Pore Structure

Description: Microporous silica materials with a controlled pore size and a narrow pore size distribution have been prepared by sol-gel processing using an organic-templating approach. Microporous networks were formed by pyrolytic removal of organic ligands (methacryloxypropyl groups) from organic/inorganic hybrid materials synthesized by copolymerization of 3-methacryloxypropylsilane (MPS) and tetraethoxysilane (TEOS). Molecular simulations and experimental measurements were conducted to examine the relationship between the microstructural characteristics of the porous silica (e.g., pore size, total pore volume, and pore connectivity) and the size and amount of organic template ligands added. Adsorption measurements suggest that the final porosity of the microporous silica is due to both primary pores (those present in the hybrid materials prior to pyrolysis) and secondary pores (those created by pyrolytic removal of organic templates). Primary pores were inaccessible to N{sub 2} at 77 K but accessible to CO{sub 2} at 195 K; secondary pores were accessible to both N{sub 2} (at 77 K) and CO{sub 2} (at 195 K) in adsorption measurements. Primary porosity decreases with the amount of organic ligands added because of the enhanced densification of MPS/TEOS hybrid materials as the mole fraction of trifunctional MPS moieties increases. pore volumes measured by nitrogen adsorption experiments at 77 K suggest that the secondary (template-derived) porosity exhibits a percolation behavior as the template concentration is increased. Gas permeation experiments indicate that the secondary pores are approximately 5 {angstrom} in diameter, consistent with predictions based on molecular simulations.
Date: September 3, 1999
Partner: UNT Libraries Government Documents Department


Description: Synchrotron X-ray microtomography shows vesicular structures for toluene/cement mixtures, prepared with 1.22 to 3.58 wt% toluene. Three-dimensional imaging of the cured samples shows spherical vesicles, with diameters ranging from 20 to 250 {micro}m; a search with EPMA for vesicles in the range of 1-20 {micro}m proved negative. However, the total vesicle volume, as computed from the microtomography images, accounts for less than 10% of initial toluene. Since the cements were cured in sealed bottles, the larger portion of toluene must be dispersed within the cement matrix. Evidence for toluene in the cement matrix comes from {sup 29}Si MAS NMR spectroscopy, which shows a reduction in chain silicates with added toluene. Also, {sup 2}H NMR of d{sub 8}-toluene/cement samples shows high mobility for all, toluene and thus no toluene/cement binding. A model that accounts for all observations follows: For loadings below about 3 wt%, most toluene is dispersed in the cement matrix, with a small fraction of the initial toluene phase separating from the cement paste and forming vesicular structures that are preserved in the cured cement. Furthermore, at loadings above 3 wt%, the abundance of vesicles formed during toluene/cement paste mixing leads to macroscopic phase separation (most toluene floats to the surface of the cement paste).
Date: July 22, 1999
Creator: BUTLER,L.G.
Partner: UNT Libraries Government Documents Department


Description: As part of our study on ''Relationships between seismic properties and rock microstructure'', we have studied (1) Effects of pore texture on porosity, permeability, and sonic velocity. We show how a relation can be found between porosity, permeability, and velocity by separating the formations of rocks with similar pore textures.
Date: June 30, 2003
Creator: Mavko, Gary
Partner: UNT Libraries Government Documents Department

Integrated, Multi-Scale Characterization of Imbibition and Wettability Phenomena Using Magnetic Resonance and Wide-Band Dielectric Measurements

Description: The petrophysical properties of rocks, particularly their relative permeability and wettability, strongly influence the efficiency and the time-scale of all hydrocarbon recovery processes. However, the quantitative relationships needed to account for the influence of wettability and pore structure on multi-phase flow are not yet available, largely due to the complexity of the phenomena controlling wettability and the difficulty of characterizing rock properties at the relevant length scales. This project brings together several advanced technologies to characterize pore structure and wettability. Grain-scale models are developed that help to better interpret the electric and dielectric response of rocks. These studies allow the computation of realistic configurations of two immiscible fluids as a function of wettability and geologic characteristics. These fluid configurations form a basis for predicting and explaining macroscopic behavior, including the relationship between relative permeability, wettability and laboratory and wireline log measurements of NMR and dielectric response. Dielectric and NMR measurements have been made show that the response of the rocks depends on the wetting and flow properties of the rock. The theoretical models can be used for a better interpretation and inversion of standard well logs to obtain accurate and reliable estimates of fluid saturation and of their producibility. The ultimate benefit of this combined theoretical/empirical approach for reservoir characterization is that rather than reproducing the behavior of any particular sample or set of samples, it can explain and predict trends in behavior that can be applied at a range of length scales, including correlation with wireline logs, seismic, and geologic units and strata. This approach can substantially enhance wireline log interpretation for reservoir characterization and provide better descriptions, at several scales, of crucial reservoir flow properties that govern oil recovery.
Date: September 30, 2007
Creator: Sharma, Mukul M.; Bryant, Steven L.; Torres-Verdin, Carlos & Hirasaki, George
Partner: UNT Libraries Government Documents Department

Structural Formation Studies of UV-Catalyzed Gels and Aerogels byLight Scattering

Description: The skeletal structure of aerogel is determined before, during, and after the gel is formed. Supercritical drying of aerogel largely preserves the pore structure that is determined near the time of gelation. To better understand these gel formation mechanisms we carried out measurements of the time evolution of light scattering in a series of gels prepared without conventional acid or base catalysis. Instead, ultraviolet light was used to catalyze the formation of silica gels made from the hydrolysis of tetraethylorthosilicate and partly prehydrolyzed tetraethylorthosilicate in ethanol. Time evolution of light scattering provides information regarding the rate and geometrical nature of the assembly of the primary silica particles formed in the sol. UV-catalyzed gels show volumetric growth typical of acid-catalyzed gels, except when UV exposure is discontinued at the gel point, where gels then show linear chain formation typical of base-catalyzed gels. Long term UV exposure leads to coarsening of the pore network, a decrease in the clarity of the aerogel, and an increase in the surface area of the aerogel. Additionally, UV exposure up to the gel point leads to increased crystallinity in the final aerogel.
Date: April 1, 1998
Creator: Hunt, Arlon J. & Ayers, Michael R.
Partner: UNT Libraries Government Documents Department


Description: Porous-walled hollow glass microspheres (PWHGMs) of a modified alkali borosilicate composition have been successfully fabricated by combining the technology of producing hollow glass microspheres (HGMs) with the knowledge associated with porous glasses. HGMs are first formed by a powder glass--flame process, which are then transformed to PWHGMs by heat treatment and subsequent treatment in acid. Pore diameter and pore volume are most influenced by heat treatment temperature. Pore diameter is increased by a factor of 10 when samples are heat treated prior to acid leaching; 100 {angstrom} in non-heat treated samples to 1000 {angstrom} in samples heat treated at 600 C for 8 hours. As heat treatment time is increased from 8 hours to 24 hours there is a slight shift increase in pore diameter and little or no change in pore volume.
Date: April 21, 2008
Creator: Raszewski, F; Erich Hansen, E; Ray Schumacher, R & David Peeler, D
Partner: UNT Libraries Government Documents Department

Water Imbibition into Rock as Affected by Sample Shape, Pore, Conductivity, and Antecedent Water Content

Description: Infiltration is often presumed to follow Philip's equation, I = st{sup 1/2}, where I is cumulative infiltration, s is sorptivity, and t is time. This form of the equation is appropriate for short times, and/or for negligible gravitational effects. For a uniform soil, this equation describes a plot of log(mass imbibed) versus log(time), with a slope (imbibition exponent) of 1/2. The equation has also been applied to low-porosity rocks, where the extremely small pores render gravitational forces negligible. Experiments recently performed on a wide variety of rocks produced imbibition exponents from 0.2 to 0.5. Many rock types showed initial imbibition proceeding as I {approx} t{sup 1/4}, then later switched to ''normal'' (t{sup 1/2}) behavior. The distance to the wetting front that corresponds to this cross-over behavior was found to be related to the sample shape: tall thin samples are more likely to exhibit the exponent 1/4, and to cross over to 1/2-type behavior later, while short, squat samples are less likely to display the 1/4-type behavior at all. Additionally, the exponents are sensitive to antecedent water content, with initially wetter samples having smaller values. In this study, we present the experimental data, and provide a consistent and physically-based explanation using percolation theory. The analogy between imbibition and diffusion is used to model imbibition into samples with low pore connectivity, with the exponents and their crossover behavior emerging from a random walk process. All laboratory phenomena--different exponents, crossover behavior, and effects of sample shape and antecedent water content--are reproduced by the model, with similar patterns across experiment and simulation. We conclude both that diffusion is a useful and powerful conceptual model for understanding imbibition, and also that imbibition experiments, being simpler than diffusion measurements, can be used to examine diffusive behavior in rock.
Date: August 29, 2005
Creator: Ewing, R.P.
Partner: UNT Libraries Government Documents Department

Sensitivity study of CO2 storage capacity in brine aquifers withclosed boundaries: Dependence on hydrogeologic properties

Description: In large-scale geologic storage projects, the injected volumes of CO{sub 2} will displace huge volumes of native brine. If the designated storage formation is a closed system, e.g., a geologic unit that is compartmentalized by (almost) impermeable sealing units and/or sealing faults, the native brine cannot (easily) escape from the target reservoir. Thus the amount of supercritical CO{sub 2} that can be stored in such a system depends ultimately on how much pore space can be made available for the added fluid owing to the compressibility of the pore structure and the fluids. To evaluate storage capacity in such closed systems, we have conducted a modeling study simulating CO{sub 2} injection into idealized deep saline aquifers that have no (or limited) interaction with overlying, underlying, and/or adjacent units. Our focus is to evaluate the storage capacity of closed systems as a function of various reservoir parameters, hydraulic properties, compressibilities, depth, boundaries, etc. Accounting for multi-phase flow effects including dissolution of CO{sub 2} in numerical simulations, the goal is to develop simple analytical expressions that provide estimates for storage capacity and pressure buildup in such closed systems.
Date: February 7, 2007
Creator: Zhou, Q.; Birkholzer, J.; Rutqvist, J. & Tsang, C-F.
Partner: UNT Libraries Government Documents Department

Multicomponent Transport through Realistic Zeolite Membranes: Characterization & Transport in Nanoporous Networks

Description: These research studies focused on the characterization and transport for porous solids which comprise both microporosity and mesoporosity. Such materials represent membranes made from zeolites as well as for many new nanoporous solids. Several analytical sorption techniques were developed and evaluated by which these multi-dimensional porous solids could be quantitatively characterized. Notably an approach by which intact membranes could be studied was developed and applied to plate-like and tubular supported zeolitic membranes. Transport processes were studied experimentally and theoretically based on the characterization studies.
Date: August 2, 2007
Creator: Conner, William C.
Partner: UNT Libraries Government Documents Department

Activation and micropore structure determination of carbon-fiber composite molecular sieves. Topical report, 30 March 1994--14 April 1995

Description: Progress in developing novel, rigid, monolithic adsorbent carbon fiber composites is described. Carbon fiber composites are activated using steam or CO{sub 2}, in order to produce uniform activation through the material and to control the pore structure and adsorptive properties. There is an overall shrinkage during activation, which is directly correlated with burnoff; burnoff above 40% results in fracture. Burnoffs higher than 10% does not produce any benefit for separation of CH{sub 4}-CO{sub 2} mixtures. Five samples of CFCMS have been prepared for testing as molecular sieves; all have relatively narrow pore size distributions with average pore diameters around 6A.
Date: May 19, 1995
Creator: Jagtoyen, M.; Derbyshire, F.; Kimber, G. & Fei, You Qing
Partner: UNT Libraries Government Documents Department