7,079 Matching Results

Search Results

Advanced search parameters have been applied.

Cold Vacuum Drying Facility Stack Air Sampling System Qualification Tests

Description: This report documents tests that were conducted to verify that the air monitoring system for the Cold Vacuum Drying Facility ventilation exhaust stack meets the applicable regulatory criteria regarding the placement of the air sampling probe, sample transport, and stack flow measurement accuracy.
Date: January 24, 2001
Creator: Glissmeyer, John A.
Partner: UNT Libraries Government Documents Department

In-situ borehole seismic monitoring of injected CO2 at the FrioSite

Description: The U.S. Dept. of Energy funded Frio Brine Pilot provided an opportunity to test borehole seismic monitoring techniques in a saline formation in southeast Texas. A relatively small amount of CO{sub 2} was injected (about 1600 tons) into a thin injection interval (about 6 m thick at 1500 m depth). Designed tests included time-lapse vertical seismic profile (VSP) and crosswell surveys which investigated the detectability of CO{sub 2} with surface-to-borehole and borehole-to-borehole measurement.
Date: June 1, 2006
Creator: Daley, Thomas M. & Korneev, Valeri A.
Partner: UNT Libraries Government Documents Department

The Effects of a Self-Monitoring Procedure on Sustainable Behavior

Description: Self-monitoring procedures are commonly used to assess environmentally sustainable behavior. The current experiment evaluated the effects of a self-monitoring procedure on two sustainable behaviors within a university office. A senior assistant was asked to report on light usage and energy-saver use on the copier in an office break room. Her reports were then compared with independent observations. Results showed that her reports were highly correspondent with independent observations although no change in target behaviors occurred. Changes in behavior occurred when she was asked to engage in the target behaviors. Results suggest that although self-monitoring procedures can correctly assess sustainable behaviors, they may not be suitable for behavior change.
Date: August 2011
Creator: Eni, Chinedu Peter
Partner: UNT Libraries


Description: Marine sediment remediation at the United Heckathorn Superfund Site was completed in April 1997. Water and mussel tissues were sampled in February 1999 from four stations near Lauritzen Canal in Richmond, California, for Year 2 of post-remediation monitoring of marine areas near the United Heckathorn Site. Dieldrin and dichlorodiphenyl trichloroethane (DDT) were analyzed in water samples, tissue samples from resident mussels, and tissue samples from transplanted mussels deployed for 4 months. Mussel tissues were also analyzed for polychlorinated biphenyls (PCB), which were detected in sediment samples. Chlorinated pesticide concentrations in water samples were similar to preremediation levels and did not meet remediation goals. Biomonitoring results indicated that the bioavailability of chlorinated pesticides has been reduced from preremediation levels both in the dredged area and throughout Richmond Harbor. Total DDT and dieldrin concentrations in mussel tissues were lower than measured levels from preremediation surveys and also lower than Year 1 levels from post-remediation biomonitoring. Sediment analyses showed the presence of elevated DDT, dieldrin, PCB aroclor 1254, and very high levels of polynuclear aromatic hydrocarbons (PAH) in Lauritzen Channel.
Date: September 6, 2000
Creator: Antrim, Liam D. & Kohn, Nancy P.
Partner: UNT Libraries Government Documents Department

A Review of Sensor Calibration Monitoring for Calibration Interval Extension in Nuclear Power Plants

Description: Currently in the United States, periodic sensor recalibration is required for all safety-related sensors, typically occurring at every refueling outage, and it has emerged as a critical path item for shortening outage duration in some plants. Online monitoring can be employed to identify those sensors that require calibration, allowing for calibration of only those sensors that need it. International application of calibration monitoring, such as at the Sizewell B plant in United Kingdom, has shown that sensors may operate for eight years, or longer, within calibration tolerances. This issue is expected to also be important as the United States looks to the next generation of reactor designs (such as small modular reactors and advanced concepts), given the anticipated longer refueling cycles, proposed advanced sensors, and digital instrumentation and control systems. The U.S. Nuclear Regulatory Commission (NRC) accepted the general concept of online monitoring for sensor calibration monitoring in 2000, but no U.S. plants have been granted the necessary license amendment to apply it. This report presents a state-of-the-art assessment of online calibration monitoring in the nuclear power industry, including sensors, calibration practice, and online monitoring algorithms. This assessment identifies key research needs and gaps that prohibit integration of the NRC-approved online calibration monitoring system in the U.S. nuclear industry. Several needs are identified, including the quantification of uncertainty in online calibration assessment; accurate determination of calibration acceptance criteria and quantification of the effect of acceptance criteria variability on system performance; and assessment of the feasibility of using virtual sensor estimates to replace identified faulty sensors in order to extend operation to the next convenient maintenance opportunity. Understanding the degradation of sensors and the impact of this degradation on signals is key to developing technical basis to support acceptance criteria and set point decisions, particularly for advanced sensors which do not ...
Date: August 31, 2012
Creator: Coble, Jamie B.; Meyer, Ryan M.; Ramuhalli, Pradeep; Bond, Leonard J.; Hashemian, Hash; Shumaker, Brent et al.
Partner: UNT Libraries Government Documents Department

Wireless In-home Ecg Monitoring System with Remote Access

Description: The thesis work details the design and testing of a wireless electrocardiogram (ECG) system. This system includes a wireless ECG device, as well as software packages to visually display the waveform locally on a computer and remotely on a web page. The remote viewing capability also extends to using an Android phone application. The purpose of the system is to serve as a means for a doctor or physician to check up on a patient away from a hospital setting. This system allows for a patient to be in their home environment while giving health vital information, primarily being the heart’s activity through the ECG, to medical personnel.
Date: August 2012
Creator: Porter, Logan
Partner: UNT Libraries

FY-2010 Process Monitoring Technology Final Report

Description: During FY 2010, work under the Spectroscopy-Based Process Monitoring task included ordering and receiving four fluid flow meters and four flow visible-near infrared spectrometer cells to be instrumented within the centrifugal contactor system at Pacific Northwest National Laboratory (PNNL). Initial demonstrations of real-time spectroscopic measurements on cold-stream simulants were conducted using plutonium (Pu)/uranium (U) (PUREX) solvent extraction process conditions. The specific test case examined the extraction of neodymium nitrate (Nd(NO3)3) from an aqueous nitric acid (HNO3) feed into a tri-n-butyl phosphate (TBP)/ n-dodecane solvent. Demonstration testing of this system included diverting a sample from the aqueous feed meanwhile monitoring the process in every phase using the on-line spectroscopic process monitoring system. The purpose of this demonstration was to test whether spectroscopic monitoring is capable of determining the mass balance of metal nitrate species involved in a cross-current solvent extraction scheme while also diverting a sample from the system. The diversion scenario involved diverting a portion of the feed from a counter-current extraction system while a continuous extraction experiment was underway. A successful test would demonstrate the ability of the process monitoring system to detect and quantify the diversion of material from the system during a real-time continuous solvent extraction experiment. The system was designed to mimic a PUREX-type extraction process with a bank of four centrifugal contactors. The aqueous feed contained Nd(NO3)3 in HNO3, and the organic phase was composed of TBP/n-dodecane. The amount of sample observed to be diverted by on-line spectroscopic process monitoring was measured to be 3 mmol (3 x 10-3 mol) Nd3+. This value was in excellent agreement with the 2.9 mmol Nd3+ value based on the known mass of sample taken (i.e., diverted) directly from the system feed solution.
Date: January 1, 2011
Creator: Orton, Christopher R.; Bryan, Samuel A.; Casella, Amanda J.; Hines, Wes; Levitskaia, Tatiana G.; henkell, J. et al.
Partner: UNT Libraries Government Documents Department

Uncertainty Quantification Techniques for Sensor Calibration Monitoring in Nuclear Power Plants

Description: This report describes the status of ongoing research towards the development of advanced algorithms for online calibration monitoring. The objective of this research is to develop the next generation of online monitoring technologies for sensor calibration interval extension and signal validation in operating and new reactors. These advances are expected to improve the safety and reliability of current and planned nuclear power systems as a result of higher accuracies and increased reliability of sensors used to monitor key parameters. The focus of this report is on documenting the outcomes of the first phase of R&D under this project, which addressed approaches to uncertainty quantification (UQ) in online monitoring that are data-driven, and can therefore adjust estimates of uncertainty as measurement conditions change. Such data-driven approaches to UQ are necessary to address changing plant conditions, for example, as nuclear power plants experience transients, or as next-generation small modular reactors (SMR) operate in load-following conditions.
Date: September 1, 2013
Creator: Ramuhalli, Pradeep; Lin, Guang; Crawford, Susan L.; Konomi, Bledar A.; Braatz, Brett G.; Coble, Jamie B. et al.
Partner: UNT Libraries Government Documents Department

Idaho National Laboratory Cultural Resource Monitoring Report for 2013

Description: This report describes the cultural resource monitoring activities of the Idaho National Laboratory’s (INL) Cultural Resource Management (CRM) Office during 2013. Throughout the year, thirty-eight cultural resource localities were revisited including: two locations with Native American human remains, one of which is also a cave; fourteen additional caves; seven prehistoric archaeological sites ; four historic archaeological sites; one historic trail; one nuclear resource (Experimental Breeder Reactor-I, a designated National Historic Landmark); and nine historic structures located at the Central Facilities Area. Of the monitored resources, thirty-three were routinely monitored, and five were monitored to assess project compliance with cultural resource recommendations along with the effects of ongoing project activities. On six occasions, ground disturbing activities within the boundaries of the Power Burst Facility/Critical Infrastructure Test Range Complex (PBF/CITRC) were observed by INL CRM staff prepared to respond to any additional finds of Native American human remains. In addition, two resources were visited more than once as part of the routine monitoring schedule or to monitor for additional damage. Throughout the year, most of the cultural resources monitored had no visual adverse changes resulting in Type 1determinations. However, Type 2 impacts were noted at eight sites, indicating that although impacts were noted or that a project was operating outside of culturally cleared limitations, cultural resources retained integrity and noted impacts did not threaten National Register eligibility. No new Type 3 or any Type 4 impacts that adversely impacted cultural resources and threatened National Register eligibility were observed at cultural resources monitored in 2013.
Date: October 1, 2013
Creator: Williams, Julie B. & Pace, Brenda
Partner: UNT Libraries Government Documents Department

Continuous monitoring of crosswell seismic travel time

Description: In two separate shallow field experiments, at two distancescales, we have used continuous monitoring to estimate the effect ofbarometric pressure on crosswell travel time and thereby calibrated thestress sensitivity of the rock volume between the wells. In a 3 mexperiment we found a stress sensitivity of 10-6/Pa while in a 30 mexperiment the sensitivity was 5 x 10-8 /Pa. Results from a deeper (1km), 2 month experiment at the San Andreas fault observation boreholeswill be presented if analysis is completed.
Date: April 14, 2006
Creator: Daley, Thomas M.; Silver, Paul G.; Niu, Fenglin & Majer, Ernest L.
Partner: UNT Libraries Government Documents Department

Comparison of temperature and humidity profiles with elastic-backscatter lidar data

Description: This contribution analyzes elastic-backscatter lidar data and temperature and humidity profiles from radiosondes acquired in Barcelona in July 1992. Elastic-backscatter lidar data reveal the distribution of aerosols within the volume of atmosphere scanned. By comparing this information with temperature and humidity profiles of the atmosphere at a similar time, we are able to asses de relationship among aerosol distribution and atmospheric stability or water content, respectively. Comparisons have shown how lidar`s revealed layers of aerosols correspond to atmospheric layers with different stability condition and water content.
Date: April 1995
Creator: Soriano, C.; Buttler, W. T. & Baldasano, J. M.
Partner: UNT Libraries Government Documents Department

Legal Compliance in Guardianship Cases An Exploratory Study: Investigating Denton County Probate Court Visitors' Program Success with Legal Compliance in Guardianship Cases in 2013

Description: Dabner, Carol P. Legal Compliance in Guardianship Cases. An Exploratory Study: Investigating Denton County Probate Court Visitors' Program Success with Legal Compliance in Guardianship Cases. Doctor of Philosophy (Applied Gerontology), December 2016, 140 pp., 18 tables, references, 20 titles. Aim: To evaluate the effectiveness of the legal compliance of the Denton County Probate Court Visitor's program in the year 2013. Rationale: Guardianship case management success is based on the presence of legal compliance of both guardians and the Court. When a guardian is legally compliant, a ward is receiving the statutorily minimum standards of care. Legal compliance equates (evidence of) the Ward receiving legally sufficient care. Research has not been vast; it has been consistent as to necessity of guardianship training, monitoring, and narrow focus of research. Evidence based research will assist in defining and developing appropriate court monitoring programs, which can add to the quality of care for elderly and disabled adults. Methods: 1,300 guardianship cases in the probate court. Of these cases, 910 had annual reports of the person filed, which 304 were reviewed using the Legal Compliance Audit. Eight (8) factors of compliance were reviewed with three (3) being Court actions and five (5) being guardian actions. Results: Exploratory study provides evidence based research of the necessary changes to develop the Denton County Probate Court Visitor's program. The guardians are more legal compliant than the Court.
Date: December 2016
Creator: Dabner, Carol Patrice
Partner: UNT Libraries

First Quarter Hanford Seismic Report for Fiscal Year 2001

Description: Hanford Seismic Monitoring provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network (HSN) for the U.S. Department of Energy and its contractors. Hanford Seismic Monitoring also locates and identifies sources of seismic activity and monitors changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, Natural Phenomena Hazards assessments, and engineering design and construction. In addition, the seismic monitoring organization works with the Hanford Site Emergency Services Organization to provide assistance in the event of a significant earthquake on the Hanford Site. The HSN and the Eastern Washington Regional Network (EWRN) consist of 41 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Monitoring staff. For the HSN, there were 477 triggers during the first quarter of fiscal year (FY) 2001 on the data acquisition system. Of these triggers, 176 were earthquakes. Forty-five earthquakes were located in the HSN area; 1 earthquake occurred in the Columbia River Basalt Group, 43 were earthquakes in the pre-basalt sediments, and 1 was earthquakes in the crystalline basement. Geographically, 44 earthquakes occurred in swarm areas, 1 earthquake was on a major structure, and no earthquakes were classified as random occurrences. The Horse Heaven Hills earthquake swarm area recorded all but one event during the first quarter of FY 2001. The peak of the activity occurred over December 12th, 13th, and 14th when 35 events occurred. No earthquakes triggered the Hanford Strong Motion Accelerometers during the first quarter of FY 2001.
Date: February 27, 2001
Creator: Hartshorn, Donald C.; Reidel, Stephen P.; Rohay, Alan C. & Valenta, Michelle M.
Partner: UNT Libraries Government Documents Department

Innovative technology summary report: ResonantSonic{reg_sign} drilling

Description: ResonantSonic{trademark} drilling has been demonstrated and deployed as an innovative tool to access the subsurface for installation of monitoring and/or remediation wells and for collection of subsurface materials for environmental restoration applications. The technology has been developed by industry with assistance from the U.S. Department of Energy (DOE) Office of Technology Development to ensure it meets the needs of the environmental restoration market.
Date: April 1, 1995
Partner: UNT Libraries Government Documents Department

National Wetland Condition Assessment : 2011 Technical Report

Description: The National Wetland Condition Assessment: 2011 Technical Report (EPA-843-R-15-006) details methods and analysis approaches used in the 2011 National Wetland Condition Assessment (NWCA) conducted by the United States Environmental Protection Agency (USEPA) and partner organizations.
Date: May 2016
Creator: United States. Environmental Protection Agency. Office of Water.
Partner: UNT Libraries Government Documents Department

Final Report - "UCM-Grid Service for User-Centric Monitoring"

Description: The User Centric Monitoring (UCM) project was aimed at developing a toolkit that provides the Virtual Organization (VO) with tools to build systems that serve a rich set of intuitive job and application monitoring information to the VO's scientists so that they can be more productive. The tools help collect and serve the status and error information through a Web interface. The proposed UCM toolkit is composed of a set of library functions, a database schema, and a Web portal that will collect and filter available job monitoring information from various resources and present it to users in a user-centric view rather than and administrative-centric point of view.
Date: November 12, 2009
Creator: Alexander, David A
Partner: UNT Libraries Government Documents Department

Big Bayou Creek and Little Bayou Creek Watershed Monitoring Program

Description: Biological monitoring of Little Bayou and Big Bayou creeks, which border the Paducah Site, has been conducted since 1987. Biological monitoring was conducted by University of Kentucky from 1987 to 1991 and by staff of the Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) from 1991 through March 1999. In March 1998, renewed Kentucky Pollutant Discharge Elimination System (KPDES) permits were issued to the US Department of Energy (DOE) and US Enrichment Corporation. The renewed DOE permit requires that a watershed monitoring program be developed for the Paducah Site within 90 days of the effective date of the renewed permit. This plan outlines the sampling and analysis that will be conducted for the watershed monitoring program. The objectives of the watershed monitoring are to (1) determine whether discharges from the Paducah Site and the Solid Waste Management Units (SWMUs) associated with the Paducah Site are adversely affecting instream fauna, (2) assess the ecological health of Little Bayou and Big Bayou creeks, (3) assess the degree to which abatement actions ecologically benefit Big Bayou Creek and Little Bayou Creek, (4) provide guidance for remediation, (5) provide an evaluation of changes in potential human health concerns, and (6) provide data which could be used to assess the impact of inadvertent spills or fish kill. According to the cleanup will result in these watersheds [Big Bayou and Little Bayou creeks] achieving compliance with the applicable water quality criteria.
Date: March 1, 1999
Creator: Kszos, L.A.; Peterson, M.J.; Ryon & Smith, J.G.
Partner: UNT Libraries Government Documents Department

Site Environmental Report for 2007 Volume II

Description: The Site Environmental Report for 2007 is an integrated report on the environmental programs at Lawrence Berkeley National Laboratory and satisfies the requirements of DOE Order 231.1A, Environment, Safety, and Health Reporting. Volume II contains individual data results from surveillance and monitoring activities.
Date: September 15, 2008
Creator: Lackner, Regina E; Baskin, David; Fox, Robert; Jelinski, John; Pauer, Ron; Thorson, Patrick et al.
Partner: UNT Libraries Government Documents Department

Instantiating a Global Network Measurement Framework

Description: perfSONAR is a web services-based infrastructure for collecting and publishing network performance monitoring. A primary goal of perfSONAR is making it easier to solve end-to-end performance problems on paths crossing several networks. It contains a set of services delivering performance measurements in a federated environment. These services act as an intermediate layer, between the performance measurement tools and the diagnostic or visualization applications. This layer is aimed at making and exchanging performance measurements across multiple networks and multiple user communities, using well-defined protocols. This paper summarizes the key perfSONAR components, and describes how they are deployed by the US-LHC community to monitor the networks distributing LHC data from CERN. All monitoring data described herein is publicly available, and we hope the availability of this data via a standard schema will inspire others to contribute to the effort by building network data analysis applications that use perfSONAR.
Date: December 15, 2008
Creator: Tierney, Brian L.; Boote, Jeff; Boyd, Eric; Brown, Aaron; Grigoriev, Maxim; Metzger, Joe et al.
Partner: UNT Libraries Government Documents Department

High Temperature ESP Monitoring

Description: The objective of the High Temperature ESP Monitoring project was to develop a downhole monitoring system to be used in wells with bottom hole well temperatures up to 300°C for measuring motor temperature, formation pressure, and formation temperature. These measurements are used to monitor the health of the ESP motor, to track the downhole operating conditions, and to optimize the pump operation. A 220 ºC based High Temperature ESP Monitoring system was commercially released for sale with Schlumberger ESP motors April of 2011 and a 250 ºC system with will be commercially released at the end of Q2 2011. The measurement system is now fully qualified, except for the sensor, at 300 °C.
Date: June 20, 2011
Creator: Booker, Jack & Dhruva, Brindesh
Partner: UNT Libraries Government Documents Department