18,908 Matching Results

Search Results

Advanced search parameters have been applied.

Testing of Metal Volumetric Standards

Description: From Purpose: "The specifications and tolerances contained in this Monograph should be of assistance to purchasers of metal capacity standards. The information on methods of calibration and use of these measures should prove valuable to weights and measures officials and those persons in industry who are concerned with measurements of volumes of fluids."
Date: April 1, 1963
Creator: Hughes, J. C. & Keysar, B. C.
Partner: UNT Libraries Government Documents Department

Annual Report: 2011-2012 Storm Season Sampling, Non-Dry Dock Stormwater Monitoring for Puget Sound Naval Shipyard, Bremerton, WA

Description: Annual PSNS non-dry dock storm water monitoring results for 2011-2012 storm season. Included are a brief description of the sampling procedures, storm event information, laboratory methods and data collection, a results and discussion section, and the conclusions and recommendations.
Date: July 3, 2013
Creator: Brandenberger, Jill M.; Metallo, David; Rupert, Brian; Johnston, Robert K. & Gebhart, Christine
Partner: UNT Libraries Government Documents Department

Effect of Rivet Holes on the Ultimate Strength Developed by 24S-T and Alclad 75S-T Sheet in Incomplete Diagonal Tension

Description: Strength tests were made of a number of 24S-T and Alclad 75S-T aluminum-alloy shear webs to determine the effect of rivet or bolt holes on the shear strength. Data were obtained for webs which approached a condition of pure shear stress as well as for webs with well-developed diagonal tension. The rivet factor, (pitch minus diameter) divided by pitch, was varied from approximately 0.81 to 0.62. These tests indicated that the shear stresses on the gross section were nearly constant for all values of the rivet factor investigated if the other properties of the web were not changed.
Date: 1943
Creator: Levin, L. Ross & Nelson, David H.
Partner: UNT Libraries Government Documents Department

Dynamic Determination of the Compressibility of Metals

Description: Abstract: "Equation of State data for duralumin in the pressure range from 0.1 to 0.3 megabar have been determined dynamically by measuring shock and free surface velocity electrically in a place of 24 ST duralumin which has been stressed by a high explosive donation. The theory is presented which allows comparison with data obtained by other experimenters, requiring the relationship between pressure and compression either at constant entropy or constant temperature. The empirical form chosen for the equation of state p = αμ + βμ-2 expresses the pressure as a quadratic function of the compression. Experimental techniques are described in detail. Five points are given for equation of state of duralumin in the pressure range from approximately 0.15 megabar to 0.33 megabars. Some data are also presented for cadmium and steel."
Date: 1954
Creator: Goranson, Roy W.; Bancroft, Dennison; Burton, Blendin L.; Blechar, Theodore; Houston, Edwin E.; Gittings, Elisabeth F. et al.
Partner: UNT Libraries Government Documents Department

Pure Metals from Chemical Processes

Description: From introduction: "Discussions of some unit chemical processes that are especially effective in obtaining metals of high purity are presented here."
Date: January 8, 1962
Creator: Wilhelm, H. A. & Peterson, David T.
Partner: UNT Libraries Government Documents Department

Metal Complexes of 2,3-Quinoxalinedithiol

Description: A series of new planar complexes with the dianion of 2,3-quinoxalinedithiol ligand has been prepared. The complexes have been characterized from the study of their analyses, magnetic moment, conductance, polarograms, electron spin resonance spectra, and electronic spectra, and compared with the available data on the corresponding maleonitriledithiolene and toluene-3,4-dithiolene complexes.
Date: May 1969
Creator: Ganguli, Kalyan Kumar, 1912-
Partner: UNT Libraries

Standard Operating Procedure for Rolling 2.75% Enriched Metal at Simonds Saw and Steel Company. Production Order No. 296. (Section

Description: Results indicate the following: buttons of zirconium di-boride, tantalum carbide, and titanium carbide cannot be obtained by electron beam melting; small ingots or buttons of boron can be obtained by electron beam melting, but the boron is still very brittle; and the chromium content of beryllium is reduced by electron beam melting. (auth)
Date: October 20, 1954
Creator: Schlitz, J. F.
Partner: UNT Libraries Government Documents Department

Molybdenum and Tungsten Structural Differences are Dependent on ndz2/(n + 1)ѕ Mixing: Comparisons of (silox)3MX/R (M = Mo, W; silox = tBu3SiO)

Description: Article discussing molybdenum and tungsten structural differences being dependent on ndz2/(n + 1)s mixing and a comparison of (silox)3MX/R (M = Mo, W; silox - tBu3SiO).
Date: July 15, 2008
Creator: Kuiper, David S.; Douthwalte, Richard E.; Mayoi, Ana-Rita; Wolczanski, Peter T.; Lobkovsky, Emil B.; Cundari, Thomas R., 1964- et al.
Partner: UNT College of Arts and Sciences

A Liquid-Metal Heat-Transfer Experiment

Description: From Introduction: "The primary objective of the Boiling Liquid Metal Program in the Reactor Engineering Division at Argonne is to be obtain experimental information pertinent to the the boiling-heat transfer and fluid-flow behavior of the alkali metals, especially sodium."
Date: June 1965
Creator: Holtz, R. E.
Partner: UNT Libraries Government Documents Department

Analytical Methods for Certain Metals Including Cerium, Thorium, Molybdenum, Tungsten, Radium, Uranium, Vanadium, Titanium and Zirconium

Description: From Introduction: "This chapter indicates the methods of determining several of the alloy metals when occurring together in the same sample. Most materials seldom contain more than two or three of these elements, but considerable time may be saved if determinations can be combined. Details of the analyses and separations are not given here, as they have been covered more fully in other chapters. Whenever possible, reference is made to the particular chapter. Only sufficient directions have been given to outline the method of procedure, actual conditions for the separations being presented on other pages."
Date: 1923
Creator: Moore, R. B.; Lind, S. C.; Marden, J. W.; Bonardi, J. P.; Davis, C. W. & Conley, J. E.
Partner: UNT Libraries Government Documents Department

Resistance of Materials to Attack by Liquid Metals

Description: From Forward: "As their contribution, the Metallurgy Division of Argonne National Laboratory was asked to assemble all available unclassified and declassifiable data on the resistance of materials to attack by liquid metals. The resulting collation of data is contained in this report."
Date: July 1950
Creator: Kelman, LeRoy R.; Wilkinson, Walter D. & Yaggee, Frank L.
Partner: UNT Libraries Government Documents Department

The Influence of Impact Velocity on the Tensile Characteristics of Some Aircraft Metals and Alloys

Description: Note presenting the results of tension tests on sixteen metals and alloys, most of which are employed extensively in aircraft construction. The tension characteristics are discussed for static conditions and rates of deformation up to about 150 feet per second. An investigation of the effect of decreasing the gage length of specimens below 1 inch is reported.
Date: October 1942
Creator: Clark, Donald S.
Partner: UNT Libraries Government Documents Department

Measurements of total hemispherical emissivity of various oxidized metals at high temperature

Description: Report presenting the results of measurements of total hemispherical emissivity at high temperatures for various metals are presented together with a limited description of the equipment and procedures used. Results regarding stainless steel, mild steel, titanium alloy, titanium, copper, aluminum, molybdenum, and tantalum are provided.
Date: March 1958
Creator: Wade, William R.
Partner: UNT Libraries Government Documents Department

Effect of Solute Atoms Upon Vacancy Climb of Prismatic Dislocations in Al- 5% Mg Alloy

Description: The climb rate of prismatic dislocations in quenched Al-5% Mg Alloy was studied by bulk annealing and also by high-temperature electron microscopy of thin foils, In bulk and thin-foil specimens, loops and helices were always observed to grow. The activation energy was determined to be 0,95 plus or minus 0.05 ev. The results can be interpreted on the basis of a binding energy between vacancies and magnesium atoms which can be x0.1 to 0.4 ev, depending on their geometrical configuration. (auth)
Date: September 1, 1962
Creator: Eikum, A. & Thomas, G.
Partner: UNT Libraries Government Documents Department


Description: In a continuation of the Hanford-Battelle cooperative program, the combined use of the vibrational-compaction and gas-pressure-bonding processes for fabricating UO/sub 2/ fuel elements was studied. Particuliar emphasis was placed on the use of agglomerated micronized UO/sub 2/ to overcome nonuniformities in the vibrationally compacted pressurebonded fuels. Inconel-X-clad fuel rods were gas-pressure bonded at 2100 deg F for 3 hr at 10,000 psi to evaluate the use of micronized UO/sub 2/ agglomerated by cold high-energy-rate forming methods. Fuel densities from 88 to 93% of theoretical were attained. A limited parallel study was also conducted a evaluate hydrostatic pressing as a method of agglomerating micronized UO/sub 2/. Tap density increased from 20 to 25% for the as-received micronized oxide to 41% for the hydrostatically agglomerated plus 200-mesh powder. Studies of the effects of prior cold work and gaspressure bonding on the mechanical and physical properties of types 304L and 347 stainless steel were conducted. Prior cold work in the range of 35 to 50% gave a pressurebonded structure having a fine grain size. (auth)
Date: July 23, 1963
Creator: Hodge, E.S.; Porembka, S.W.; Boyer, C.B. & Diersing, R.J.
Partner: UNT Libraries Government Documents Department