Search Results

Advanced search parameters have been applied.
open access

Physical simulations of cavity closure in a creeping material

Description: The finite element method has been used extensively to predict the creep closure of underground petroleum storage cavities in rock salt. Even though the numerical modeling requires many simplifying assumptions, the predictions have generally correlated with field data from instrumented wellheads, however, the field data are rather limited. To gain an insight into the behavior of three-dimensional arrays of cavities and to obtain a larger data base for the verification of analytical simulations … more
Date: September 1, 1985
Creator: Sutherland, H.J. & Preece, D.S.
Partner: UNT Libraries Government Documents Department
open access

Structural analysis of the West Hackbery No. 6 SPR storage cavern

Description: Four separate structural analyses of the West Hackberry No. 6 SPR storage cavern are presented. One analysis covers the creep response of the cavern beginning shortly before the time when an accidental fire occurred and proceeding through the cavern recertification pressure test. The second analysis models the surface uplife that is expected during the same pressure test. The third and fourth numerical studies investigate the structural response of West Hackberry No. 6 to slabbing and a rapid p… more
Date: August 1, 1980
Creator: Benzley, S.E.
Partner: UNT Libraries Government Documents Department
open access

Safety rod latch inspection

Description: During an attempt to raise control rods from the 100 K reactor in December, one rod could not be withdrawn. Subsequent investigation revealed that a small button'' in the latch mechanism had broken off of the lock plunger'' and was wedged in a position that prevented rod withdrawal. Concern that this failure may have resulted from corrosion or some other metallurgical problem resulted in a request that SRL examine six typical latch mechanisms from the 100 L reactor by use of radiography and met… more
Date: February 1, 1992
Creator: Leader, D.R.
Partner: UNT Libraries Government Documents Department
open access

Testing program for determining the mechanical properties of concrete to temperatures of 621/sup 0/C

Description: Concrete temperatures in a Liquid Metal Fast Breeder Reactor (LMFBR) in excess of normal code limits can result from postulated large sodium spills in equipment cells. Elevated temperature concrete property data which may have application for providing a basis for the design and evaluation of such postulated accident conditions is limited. Data thus needed to be developed commensurate with LMFBR plant applications for critical physical and mechanical concrete properties under prototypic thermal… more
Date: January 1, 1980
Creator: Oland, C.B.; Naus, D.J. & Robinson, G.C.
Partner: UNT Libraries Government Documents Department
open access

TCT hybrid preconceptual blanket design studies

Description: The conceptual design of a tokamak fusion-fission (hybrid) reactor, which produces electric power and fissile material, has been performed in a cooperative effort between Princeton's Plasma Physics Laboratory (PPPL) and Battelle's Pacific Northwest Laboratories (PNL). PPPL, who had overall project lead responsibility, designed the fusion driver system. Its core consists of a tokamak plasma maintained in the two-component torus (TCT) mode by both D and T beams and having a single null poloidal d… more
Date: January 1, 1978
Creator: Aase, D. T.; Bampton, M. C. C.; Doherty, T. J.; Leonard, B. R.; McCann, R. A.; Newman, D. F. et al.
Partner: UNT Libraries Government Documents Department
open access

High temperature ceramic membrane reactors for coal liquid upgrading

Description: In this project we intend to study a novel process concept, i.e, the use of ceramic membranes reactors in upgrading of coal derived liquids. Membrane reactors have been used in a number of catalytic reaction processes in order to overcome the limitations on conversion imposed by thermodynamic equilibrium. They have, furthermore, the inherent capability for combining reaction and separation in a single step. Thus they offer promise for improving and optimizing yield, selectivity and performance … more
Date: January 1, 1992
Creator: Tsotsis, T.T.
Partner: UNT Libraries Government Documents Department
open access

Conductor qualification tests for the 30-MJ Bonneville Power Administration SMES coil

Description: The 30-MJ energy storage coil for the Bonneville Power Administration requires a low-loss, cryostable conductor that is able to carry 4.9 kA in a field of 2.8 T and will maintain its properties over 10/sup 8/ partial discharge cycles. The multi-level cable which satisfies these requirements has been extensively tested at various stages in its development and in its final form. Tests have been performed to determine the effect of manufacturing options on ac losses, low temperature electrical res… more
Date: January 1, 1980
Creator: Schermer, R. I.; Boenig, H. J.; Henke, M.; Turner, R. D. & Schramm, R.
Partner: UNT Libraries Government Documents Department
open access

Phosphate-bonded glass cements for geothermal wells. Final report

Description: Calcium aluminosilicate glasses were found to react with phosphoric acid in three ways depending upon silica content. Above 55% SiO/sub 2/ they are insoluble while below 50% they dissolve readily. The transition compositions release calcium and aluminum ions and a silica gel phase replaces the glass. Activation energies in the order of 10 kcal/mole are associated with the dissolution. Equilibrium studies in the systems CaO-P/sub 2/O/sub 5/-H/sub 2/O, Al/sub 2/O/sub 3/-P/sub 2/O/sub 5/-H/sub 2/O… more
Date: September 1, 1979
Creator: Rockett, T.J.
Partner: UNT Libraries Government Documents Department
open access

High-temperature turbine technology program hot-gas path development test. Part II. Testing

Description: This topical report of the US Department of Energy High-Temperature Turbine Technology (DOE-HTTT) Phase II program presents the results of testing full-scale water-cooled first-stage and second-stage turbine nozzles at design temperature and pressure to verify that the designs are adequate for operation in a full-scale turbine environment. Low-cycle fatigue life of the nozzles was demonstrated by subjecting cascade assemblies to several hundred simulated startup/shutdown turbine cycles. This te… more
Date: March 1, 1982
Creator: Horner, M. W.
Partner: UNT Libraries Government Documents Department
open access

Integrity of PWR pressure vessels during overcooling accidents

Description: The reactor pressure vessel in a pressurized water reactor is normally subjected to temperatures and pressures that preclude propagation of sharp, crack-like defects that might exist in the wall of the vessel. However, there is a class of postulated accidents, referred to as overcooling accidents, that can subject the pressure vessel to severe thermal shock while the pressure is substantial. As a result of such accidents vessels containing high concentrations of copper and nickel, which enhance… more
Date: January 1, 1982
Creator: Cheverton, R.D.; Iskander, S.K. & Whitman, G.D.
Partner: UNT Libraries Government Documents Department
open access

Coal Technology Program. Progress report for November 1977

Description: A block of Pittsburgh seam bituminous coal and a block of Wyodak subbituminous coal were pyrolyzed under reducing gas in support of in situ gasification. Information from previously completed block pyrolysis of bituminous coal under an argon atmosphere show that differences in evolved gas result from differences in heating rates. Compared to block pyrolysis at 0.3 C/sup 0//min, block pyrolysis at 3 C/sup 0//min produces less gas but gas with a higher heating value, yielding a higher overall pyr… more
Date: January 1, 1978
Partner: UNT Libraries Government Documents Department
open access

Investigation of joining techniques for advanced austenitic alloys

Description: Modified Alloys 316 and 800H, designed for high temperature service, have been developed at Oak Ridge National Laboratory. Assessment of the weldability of the advanced austenitic alloys has been conducted at the University of Tennessee. Four aspects of weldability of the advanced austenitic alloys were included in the investigation.
Date: May 1, 1991
Creator: Lundin, C. D.; Qiao, C. Y. P.; Kikuchi, Y.; Shi, C. & Gill, T. P. S.
Partner: UNT Libraries Government Documents Department
open access

Elastic and Plastic Strains and the Stress Corrosion Cracking of Austenitic Stainless Steels. Progress Report, April 30, 1977--December 30, 1977

Description: A newly developed test environment based on NaCl, Na/sub 2/SO/sub 4/, and HCl has provided some insight to several aspects of SCC in a transformable austenitic stainless steel. Current vs. time curves indicated the presence of the formation of a ''protective'' film which drastically reduced the anodic current leading to failure. This film, not indicated by the polarization curves, is subject to highly localized damage such as pitting. Thus, although it allows only very small corrosion currents,… more
Date: January 1, 1978
Creator: Troiano, A. R.
Partner: UNT Libraries Government Documents Department
open access

Physical properties of halthane series adhesives, part 2 of 2. Period covered: October--December 1976. [Urethanes: tensile adhesion; bulk viscosity; hardness]

Description: The Halthane series of urethane adhesives have sufficient adhesive strengths and cure times for most assembly processes at Pantex. The efficiency of preparation and handling of the three systems are nearly equal. Physical properties are more consistent between samples for the 87-1. The 73-18 system is ranked in the middle and 73-14 as the least consistent. The 87-1 system is high in viscosity and adhesive bond strength. The low viscosity of 73-18 and 73-14 allows more consistency in bond thickn… more
Date: January 1, 1976
Creator: Lichte, H. W.
Partner: UNT Libraries Government Documents Department
open access

Radiation-induced segregation in HT-9 martensitic steel

Description: Miniature notched-bar specimens of normalized and tempered HT-9 were neutron irradiated to approx.13 dpa and broken at liquid nitrogen temperatures in a UHV chamber. Fracture surfaces were analyzed using scanning Auger electron spectroscopy. Following irradiation at 410/sup 0/C, the fracture surface contained a small number of large relatively smooth facets, which are thought to be prior austenite grain boundaries. Strong segregation of Ni, Cr, Si, and P was detected at these surfaces, the rema… more
Date: January 1, 1986
Creator: Clausing, R.E.; Heatherly, L.; Faulkner, R.G.; Rowcliffe, A.F. & Farrell, K.
Partner: UNT Libraries Government Documents Department
open access

Research, development and demonstration of nickel-iron batteries for electric vehicle propulsion. Annual report for 1979

Description: Research progress in the development of Ni/Fe batteries (electrodes in particular) for the period is described. The negative plate demonstrated a reliable lifetime of almost 1000 cycles; 20 mm positive plates were proved feasible; prototype cells yielded output at about 50 Wh/kg and 100 Wh/liter; program goals of 20% greater than these figures appear feasible. 27 figures, 20 tables. (RWR)
Date: June 1, 1980
Partner: UNT Libraries Government Documents Department
open access

Development of an extended-burnup Mark B design. First semi-annual progress report, July-December 1978. Report BAW-1532-1. [PWR]

Description: The primary objective of this program is to develop and demonstrate an improved PWR fuel assembly design capable of batch average burnups of 45,000-50,000 MWd/mtU. To accomplish this, a number of technical areas must be investigated to verify acceptable extended-burnup fuel performance. This report is the first semi-annual progress report for the program, and it describes work performed during the July-December 1978 time period. Efforts during this period included the definition of a preliminar… more
Date: October 1, 1979
Partner: UNT Libraries Government Documents Department
open access

Role of diagnostic testing in identifying and resolving dimensional-stability problems in electroplated laser mirrors

Description: The metal mirrors which are the subject of this discussion are to be used in the Antares inertial fusion laser system. Antares is a high-power (40 TW), high-energy (35 to 40 kJ), pulsed CO/sub 2/ laser system for the investigation of inertial confinement fusion. The system contains more than four hundred small and large diamond-turned and conventionally polished mirrors. The largest mirrors are trapezoidal in shape with the longest dimension being 16 to 18 inches. The substrates are type 2124 a… more
Date: January 1, 1982
Creator: Cutler, R.L. & Hogan, B.
Partner: UNT Libraries Government Documents Department
open access

Metals and Ceramics Division. Annual progress report, ending June 30, 1980

Description: Research is reported concerning: (1) engineering materials, including materials compatibility, mechanical properties, nondestructive testing, pressure vessel technology, and welding and brazing; (2) fuels and processes consisting of ceramic technology, fuel cycle technology, fuels evaluation, fuel fabrication and metals processing; and (3) materials science which includes, ceramic studies, physical metallurgy properties, radiation effects and microstructural analysis, metastable and superconduc… more
Date: September 1, 1980
Partner: UNT Libraries Government Documents Department
open access

Ceramic technology for Advanced Heat Engines Project

Description: Significant accomplishments in fabricating ceramic components for advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and database and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine… more
Date: July 1, 1991
Creator: Johnson, D. R.
Partner: UNT Libraries Government Documents Department
open access

Development of potential uses for the residue from fluidized bed combustion processes. Quarterly technical progress report, June-August 1980

Description: The following conclusions are recorded: The road base mixes in which quartz silica was substituted for the pulverized coal fly ash gave compressive strengths similar to those using the pulverized coal fly ash. The compressive strengths of road base mixes using recently produced AFB residue were of the same order of magnitude as those obtained in 1977, although the data covers a broad range of test results. Briquettes, produced from a number of trial mixes, show promise as a synthetic aggregate.… more
Date: January 1, 1980
Creator: Minnick, L.J.
Partner: UNT Libraries Government Documents Department
open access

Low strain diameter expansion of internally pressurized Zircaloy-4 tubing at high temperatures

Description: Tests of closed-end, internally pressurized, Zircaloy-4 tubing specimens were utilized to develop low strain creep characteristics as a function of time at temperatures in the range of 1475/sup 0/F to 2000/sup 0/F (802/sup 0/C to 1093/sup 0/C) and hoop stresses in the range of 250 to 2500 psi for use in loss-of-coolant accident (LOCA) analyses. The strain rate above the start of the alpha to beta phase transformation region, approximately 1490/sup 0/F (810/sup 0/C), was found to be sensitive to… more
Date: March 1978
Creator: White, L.S. & Busby, C.C.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen