673 Matching Results

Search Results

Advanced search parameters have been applied.

Lift truck safety review

Description: This report presents safety information about powered industrial trucks. The basic lift truck, the counterbalanced sit down rider truck, is the primary focus of the report. Lift truck engineering is briefly described, then a hazard analysis is performed on the lift truck. Case histories and accident statistics are also given. Rules and regulations about lift trucks, such as the US Occupational Safety an Health Administration laws and the Underwriter`s Laboratories standards, are discussed. Safety issues with lift trucks are reviewed, and lift truck safety and reliability are discussed. Some quantitative reliability values are given.
Date: March 1, 1997
Creator: Cadwallader, L. C.
Partner: UNT Libraries Government Documents Department

LDRD final report on enhanced edge detection techniques for manufacturing quality control and materials characterization

Description: Detecting object boundaries in the presence of cast shadows is a difficult task for machine vision systems. A new edge detector is presented which responds to shadow penumbras and abrupt object edges with distinguishable signals. The detector requires the use of spatially extended light sources and sufficient video resolution to resolve the shadow penumbras of interest. Detection of high frequency noise is suppressed without requiring image-dependent adjustment of signal thresholds. The ability of the edge operator to distinguish shadow penumbras from abrupt object boundaries while suppressing responses to high frequency noise and texture is illustrated with idealized shadow and object edge intensity profiles. Selective detection of object boundaries in a video scene with a cast shadow has also been demonstrated with this operator.
Date: January 1, 1997
Creator: Osbourn, G.C.
Partner: UNT Libraries Government Documents Department

Design package lazy susan for the fuel retrieval system

Description: This is a design package that contains the details for a Lazy Susan style small tool for the Fuel Retrieval System. The Lazy Susan tool is used to help rotate an MCO Fuel Basket when loading it. This document contains requirements, development design information, tests and test reports that pertain to the production of Lazy Susan small tool.
Date: September 10, 1999
Creator: TEDESCHI, D.J.
Partner: UNT Libraries Government Documents Department

Design Criteria for Bagless Transfer System (BTS) Packaging System

Description: This document provides the criteria for the design and installation of a Bagless Transfer System (BTS); Blend, Sieve and Balance Equipment; and Supercritical Fluid Extraction System (SFE). The project consists of 3 major modules: (1) Bagless Transfer System (BTS) Module; (2) Blend, Sieve and Balance Equipment; and (3) Supercritical Fluid Extraction (SFE) Module.
Date: April 26, 2000
Creator: RISENMAY, H.R.
Partner: UNT Libraries Government Documents Department

Assembly procedure for Shot Loading Platform

Description: This supporting document describes the assembly procedure for the Shot Loading Platform. The Shot Loading Platform is used by multiple equipment removal projects to load shielding shot in the annular spaces of the equipment storage containers. The platform height is adjustable to accommodate different sizes of storage containers and transport assemblies.
Date: April 1, 1995
Creator: Routh, R.D.
Partner: UNT Libraries Government Documents Department

Robotics crosscutting program: Technology summary

Description: The Office of Environmental Management (EM) is responsible for cleaning up the legacy of radioactive and chemically hazardous waste at contaminated sites and facilities throughout the U.S. Department of Energy (DOE) nuclear weapons complex, preventing further environmental contamination, and instituting responsible environmental management. Initial efforts to achieve this mission resulted in the establishment of environmental restoration and waste management programs. However, as EM began to execute its responsibilities, decision makers became aware that the complexity and magnitude of this mission could not be achieved efficiently, affordably, safely, or reasonably with existing technology. Once the need for advanced cleanup technologies became evident, EM established an aggressive, innovative program of applied research and technology development. The Office of Technology Development (OTD) was established in November 1989 to advance new and improved environmental restoration and waste management technologies that would reduce risks to workers, the public, and the environment; reduce cleanup costs; and devise methods to correct cleanup problems that currently have no solutions. In 1996, OTD added two new responsibilities - management of a Congressionally mandated environmental science program and development of risk policy, requirements, and guidance. OTD was renamed the Office of Science and Technology (OST). This documents presents information concerning robotics tank waste retrieval overview, robotic chemical analysis automation, robotics decontamination and dismantlement, and robotics crosscutting and advanced technology.
Date: August 1, 1996
Partner: UNT Libraries Government Documents Department

A 3-d modular gripper design tool

Description: Modular fixturing kits are precisely machined sets of components used for flexible, short-turnaround construction of fixtures for a variety of manufacturing purposes. A modular vise is a parallel-jaw vise, where each jaw is a modular fixture plate with a regular grid of precisely positioned holes. A modular vise can be used to locate and hold parts for machining, assembly, and inspection tasks. To fixture a part, one places pins in some of the holes so that when the vise is closed, the part is reliably located and completely constrained. The modular vise concept can be adapted easily to the design of modular parallel-jaw grippers for robots. By attaching a grid plate to each jaw of a parallel-jaw gripper, the authors gain the ability to easily construct high-quality grasps for a wide variety of parts from a standard set of hardware. Wallack and Canny developed a previous algorithm for planning planar grasp configurations for the modular vise. In this paper, the authors expand this work to produce a 3-d fixture/gripper design tool. They describe several analyses added to the planar algorithm to improve its utility, including a three-dimensional grasp quality metric based on geometric and force information, three-dimensional geometric loading analysis, and inter-gripper interference analysis to determine the compatibility of multiple grasps for handing the part from one gripper to another. Finally, the authors describe two applications which combine the utility of modular vise-style grasping with inter-gripper interference: The first is the design of a flexible part-handling subsystem for a part cleaning workcell under development at Sandia National Laboratories; the second is the automatic design of grippers that support the assembly of multiple products on a single assembly line.
Date: January 1, 1997
Creator: Brown, R.G. & Brost, R.C.
Partner: UNT Libraries Government Documents Department

A 3-d modular gripper design tool

Description: Modular fixturing kits are sets of components used for flexible, rapid construction of fixtures. A modular vise is a parallel-jaw vise, each jaw of which is a modular fixture plate with a regular grid of precisely positioned holes. To fixture a part, one places pins in some of the holes so that when the vise is closed, the part is reliably located and completely constrained. The modular vise concept can be adapted easily to the design of modular parallel-jaw grippers for robots. By attaching a grid-plate to each jaw of a parallel-jaw gripper, one gains the ability to easily construct high-quality grasps for a wide variety of parts from a standard set of hardware. Wallack and Canny developed an algorithm for planning planar grasp configurations for the modular vise. In this paper, the authors expand this work to produce a 3-d fixture/gripper design tool. They describe several analyses they have added to the planar algorithm, including a 3-d grasp quality metric based on force information, 3-d geometric loading analysis, and inter-gripper interference analysis. Finally, the authors describe two applications of their code. One of these is an internal application at Sandia, while the other shows a potential use of the code for designing part of an agile assembly line.
Date: February 1, 1997
Creator: Brown, R.G. & Brost, R.C.
Partner: UNT Libraries Government Documents Department

Thermal response of a can handling unit (CHU) to a postulated plutonium hydride burn

Description: A series of analyses were performed to support the design of the Can Handling Unit (CHU). The subject analyses focused on determining the time to repressurize a subatmospheric storage can containing plutonium metal versus the initial hole size and the transient thermal response to a postulated chemical reaction of 150 grams of plutonium hydride. Limiting the amount of gaseous reactants either by inerting the CHU or using a very small hole size for the initial opening appears to be a viable method of controlling the rate of the exothermic chemical reactions and system temperatures.
Date: May 21, 1998
Creator: Crea, B. A.
Partner: UNT Libraries Government Documents Department

Fifth wheel installation, S97556, Issue H

Description: This report consists of one engineering drawing showing the design of the Fifth Wheel System for a semi-tractor trailer truck. Notes on the drawing give instructions for installation of some items, references to other drawings and instructions, and testing procedures.
Date: December 31, 1994
Creator: Arning, C.
Partner: UNT Libraries Government Documents Department

Fifth wheel modification assembly, Issue U

Description: This report consists of one engineering drawing showing modifications to the Fifth Wheel System for a semi-tractor trailer truck. Notes give instructions for installation of some items, where other items may be purchased, testing instructions, and shipping instructions.
Date: December 31, 1994
Creator: Arning, C.
Partner: UNT Libraries Government Documents Department

Weapon container catalog. Volumes 1 & 2

Description: The Weapon Container Catalog describes H-gear (shipping and storage containers, bomb hand trucks and the ancillary equipment required for loading) used for weapon programs and for special use containers. When completed, the catalog will contain five volumes. Volume 1 for enduring stockpile programs (B53, B61, B83, W62, W76, W78, W80, W84, W87, and W88) and Volume 2, Special Use Containers, are being released. The catalog is intended as a source of information for weapon program engineers and also provides historical information. The catalog also will be published on the SNL Internal Web and will undergo periodic updates.
Date: February 1, 1998
Creator: Brown, L.A. & Higuera, M.C.
Partner: UNT Libraries Government Documents Department

Independent engineering report and certification for closure of building 419 equipment including the size reduction unit {ampersand} solidification unit at Lawrence Livermore National Laboratory

Description: Closure of Building 419 Equipment Including the Size Reduction Unit and Solidification Unit December 31, 1996 Closure activities began in June, 1995 and equipment closure activities were completed in December, 1996. This report determines final closure for B419 Equipment, and was prepared and submitted to LLNL in the final stage of the work. CE performed the Independent Engineering services at the request of Ms Dixie Finley of LLNL, as part of the B419 Closure Plan requirement. B419 was constructed by the Navy in the 1940s and used by the Navy for various purposes related to airplane maintenance. In later years, the building was used by a health chemistry program as an assay laboratory. Since 1975, the building has been used by LLNL for equipment decontamination and hazardous and mixed waste treatment activities known as size reduction and solidification. These activities which were covered by the LLNL Part B Permit Application, were discontinued in late 1989 because B419 could not meet the seismic guidelines of the Uniform Building Code (UBC). B419 is a 7, 860 ft square structure consisting of three areas. The middle area has a second floor (attic area); the other two areas (north side and south side) have one floor. The size reduction activities occurred in the south side of the building (room 124), while the solidification activities occurred in the north side (rooms 155 and 167). Documentation for closure of B419 was submitted on September 23, 1994 to DTSC. The documentation consisted of a letter, together with the Closure Plan, Sa1017 Sampling and Analysis Plan, and Health and Safety Plan. A revision to this documentation was sent to DTSC on November 14, 1996, reflecting a two-phase closure for B419 as follows: RCRA Equipment Closure phase to be completed and certified by December 31, 1996. RCRA Structural Closure ...
Date: December 31, 1996
Creator: Chow Engineering, Inc.
Partner: UNT Libraries Government Documents Department

Functional test procedure, Fifth Wheel: SS-R42351, Issue D

Description: This report describes the equipment required for initial assembly/maintenance and inspection/resetting of the Fifth Wheel system. It also gives a step-by-step procedure for initial assembly/maintenance inspection and procedures for resetting the system and Eager-Pac installation. The Fifth Wheel system is associated with a tractor-type vehicle used for materials handling.
Date: July 12, 1994
Partner: UNT Libraries Government Documents Department

Multi-robots to micro-surgery: Selected robotic applications at Sandia National Laboratories

Description: The Intelligent Systems and Robotics Center (ISRC) at Sandia National Laboratories is a multi-program organization, pursuing research, development and applications in a wide range of field. Activities range from large-scale applications such as nuclear facility dismantlement for the US Department of Energy (DOE), to aircraft inspection and refurbishment, to automated script and program generation for robotic manufacturing and assembly, to miniature robotic devices and sensors for remote sensing and micro-surgery. This paper describes six activities in the large and small scale that are underway and either nearing technology transfer stage or seeking industrial partners to continue application development. The topics of the applications include multiple arm coordination for intuitively maneuvering large, ungainly work pieces; simulation, analysis and graphical training capability for CP-5 research reactor dismantlement; miniature robots with volumes of 16 cubic centimeters and less developed for inspection and sensor deployment; and biomedical sensors to enhance automated prosthetic device production and fill laparoscopic surgery information gap.
Date: November 1, 1996
Creator: Bennett, P.C.
Partner: UNT Libraries Government Documents Department

Radiant{trademark} Liquid Radioisotope Intravascular Radiation Therapy System

Description: RADIANT{trademark} is manufactured by United States Surgical Corporation, Vascular Therapies Division, (formerly Progressive Angioplasty Systems). The system comprises a liquid {beta}-radiation source, a shielded isolation/transfer device (ISAT), modified over-the-wire or rapid exchange delivery balloons, and accessory kits. The liquid {beta}-source is Rhenium-188 in the form of sodium perrhenate (NaReO{sub 4}), Rhenium-188 is primarily a {beta}-emitter with a physical half-life of 17.0 hours. The maximum energy of the {beta}-particles is 2.1 MeV. The source is produced daily in the nuclear pharmacy hot lab by eluting a Tungsten-188/Rhenium-188 generator manufactured by Oak Ridge National Laboratory (ORNL). Using anion exchange columns and Millipore filters the effluent is concentrated to approximately 100 mCi/ml, calibrated, and loaded into the (ISAT) which is subsequently transported to the cardiac catheterization laboratory. The delivery catheters are modified Champion{trademark} over-the-wire, and TNT{trademark} rapid exchange stent delivery balloons. These balloons have thickened polyethylene walls to augment puncture resistance; dual radio-opaque markers and specially configured connectors.
Date: January 16, 1998
Creator: Eigler, N.; Whiting, J.; Chernomorsky, A.; Jackson, J.; Knapp, F.F., Jr. & Litvack, F.
Partner: UNT Libraries Government Documents Department