296 Matching Results

Search Results

Advanced search parameters have been applied.

Light transmission and air used for inspection of glovebox gloves.

Description: Various materials used for manufacturing the glovebox gloves are translucent material such as hypalon, rubbers, and neoprene. This means that visible light can be transmitted through the inside of the material. Performing this test can help to increase visualization of the integrity of the glove. Certain flaws such as pockmarks, foreign material, pinholes, and scratches could be detected with increased accuracy. An analysis was conducted of the glovebox gloves obscure polymer material using a inspection light table. The fixture is equipped with a central light supply and small air pump to inflate the glove and test for leak and stability. A glove is affixed to the fixture for 360-degree inspection. Certain inspection processes can be performed: (1) Inspection for pockmarks and thin areas within the gloves; (2) Observation of foreign material within the polymer matrix; and (3) Measurements could be taken for gloves thickness using light measurements. This process could help reduce eyestrain when examining gloves and making a judgment call on the size of material thickness in some critical areas. Critical areas are fingertips and crotch of fingers.
Date: January 1, 2002
Creator: Castro, J. M. (Julio M.); Steckle, W. P. (Warren P.), Jr. & Macdonald, J. M. (John M.)
Partner: UNT Libraries Government Documents Department

Sodium-to-gas leak-detection testing for FFTF: Letter 7754921

Description: The current status of the program is as follows: Work is in progress on Evaluation of Sodium Aerosol Generation Versus Leak Rate. Testing on Demonstration of Contact Leak Detector Performance in FFTF Reactor Inlet Guard Pipe has been completed and the final report is in preparation. Testing of Sodium Ionization Detector Response to Extraneous Materials is delayed until a current design Sodium Ionization Detector is available.
Date: November 11, 1977
Partner: UNT Libraries Government Documents Department

ANALYSIS OF CURRENT FIELD DATA

Description: This report provides a concise summary of the information collected and analyzed regarding the leak characteristics which define them as applicable candidates for pressure activated sealant technology. This information covers Office of Pipeline Safety reported incidents from 1985 to 1997 and was collected from existing data sources as well as operator and service company input.
Date: January 1, 2004
Creator: Romano, Michael A.
Partner: UNT Libraries Government Documents Department

Method to control the amount of helium during leak testing

Description: The purpose of this paper is to demonstrate a method for limiting the amount of helium administered during leak testing and provide a method for keeping the atmospheric helium in a location to a minimum to eliminate backstreaming into the system. This method utilizes the permeability of a balloon. The transporting of helium to the leak check area is also safer by not requiring a cylinder in the leak check location. Utilizing the many shapes of balloons and partially filling of the balloon, any configuration can deliver helium to the leak location. The balloon I filled for the test fell to the floor with the amount of helium I put into the balloon.
Date: March 29, 2002
Creator: Frank E. Jurvic, Jr.
Partner: UNT Libraries Government Documents Department

DESIGN OF A CONTAINMENT VESSEL CLOSURE FOR SHIPMENT OF TRITIUM GAS

Description: This paper presents a design summary of the containment vessel closure for the Bulk Tritium Shipping Package (BTSP). This new package is a replacement for a package that has been used to ship tritium in a variety of content configurations and forms since the early 1970s. The new design is based on changes in the regulatory requirements. The BTSP design incorporates many improvements over its predecessor by implementing improved testing, handling, and maintenance capabilities, while improving manufacturability and incorporating new engineered materials that enhance the package's ability to withstand dynamic loading and thermal effects. This paper will specifically summarize the design philosophy and engineered features of the BTSP containment vessel closure. The closure design incorporates a concave closure lid, metallic C-Ring seals for containing tritium gas, a metal bellows valve and an elastomer O-Ring for leak testing. The efficient design minimizes the overall vessel height and protects the valve housing from damage during postulated drop and crush scenarios. Design features will be discussed.
Date: July 3, 2007
Creator: Eberl, K & Paul Blanton, P
Partner: UNT Libraries Government Documents Department

FIFTH INTERIM STATUS REPORT: MODEL 9975 PCV O-RING FIXTURE LONG-TERM LEAK PERFORMANCE

Description: A series of experiments to monitor the aging performance of Viton{sup reg.} GLT O-rings used in the Model 9975 package has been ongoing for six years at the Savannah River National Laboratory. Sixty-seven mock-ups of 9975 Primary Containment Vessels (PCVs) were assembled and heated to temperatures ranging from 200 to 450 F. They were leak-tested initially and have been tested at nominal six month intervals to determine if they meet the criterion of leaktightness defined in ANSI standard N14.5-97. Fourteen additional tests were initiated in 2008 with GLT-S O-rings heated to temperatures ranging from 200 to 400 F. High temperature aging continues for 36 GLT O-ring fixtures at 200--350 F. Room temperature leak test failures have been experienced in 5 of the GLT O-ring fixtures aging at 300 and 350 F, and in all 3 of the GLT O-ring fixtures aging at higher temperatures. No failures have yet been observed in GLT O-ring fixtures aging at 200 F for 30--48 months, which is still bounding to O-ring temperatures during storage in KAMS. High temperature aging continues for 6 GLT-S O-ring fixtures at 200--300 F. Room temperature leak test failures have been experienced in all 8 of the GLT-S O-ring fixtures aging at 350 and 400 F. No failures have yet been observed in GLT-S O-ring fixtures aging at 200 or 300 F for 19 months. For O-ring fixtures that have failed the room temperature leak test and been disassembled, the O-rings displayed a compression set ranging from 51--95%. This is significantly greater than seen to date for packages inspected during KAMS field surveillance (23% average). For GLT O-rings, service life based on the room temperature leak rate criterion is comparable to that predicted by compression stress relaxation (CSR) data at higher temperatures (350--400 F). While there are no comparable failure ...
Date: November 1, 2010
Creator: Daugherty, W. & Hoffman, E.
Partner: UNT Libraries Government Documents Department

Evaluation of PEGIT duct connection system

Description: Most air duct system components are assembled in the field and are mechanically fastened by sheet metal screws (for sheet metal-to-sheet metal) or by drawbands (for flex duct-to-sheet metal). Air sealing is separate from this mechanical fastening and is usually achieved using tape or mastic products after mechanical fastening. Field observations have shown that mechanical fastening rarely meets code or manufacturers requirements and that sealing procedures are similarly inconsistent. To address these problems, Proctor Engineering Group (PEG) is developing a system of joining ducts (called PEGIT) that combines the mechanical fastening and sealing into a single self-contained procedure. The PEGIT system uses a shaped flexible seal between specially designed sheet metal duct fittings to both seal and fasten duct sections together. Figure 1 shows the inner duct fitting complete with rubber seal. This seal provides the air seal for the completed fitting and is shaped to allow the inner and outer fittings to slide together, and then to lock the fittings in place. The illustration in Figure 2 shows the approximate cross section of the rubber seal that shows how the seal has a lip that is angled backwards. This angled lip allows the joint to be pushed together by folding flat but then its long axis makes it stiff in the pulling apart direction. This study was undertaken to assist PEG in some of the design aspects of this system and to test the performance of the PEGIT system. This study was carried out in three phases. The initial phase evaluated the performance of a preliminary seal design for the PEGIT system. After the first phase, the seal was redesigned and this new seal was evaluated in the second phase of testing. The third phase performed more detailed testing of the second seal design to optimize the production tolerances ...
Date: August 1, 2003
Creator: Walker, Iain S.; Brenner, Douglas E.; Sherman, Max H. & Dickerhoff, Darryl J.
Partner: UNT Libraries Government Documents Department

IMPACT OF DUCT LEAKAGE PRESSURES ON THE SHAPE OF THE DELTA Q CURVE.

Description: The question of whether and to what extent information on the pressures driving duct leaks can be extracted from the data taken during the Delta Q test for duct leakage is investigated. Curves of Delta Q vs. house pressure are generated for sets of cases where the supply and return leakage rates to/from outside are held constant while the leakage pressures are varied. It is found that the Delta Q curve takes on two qualitatively different shapes, one for leakage pressures within the range of house pressures used in the Delta Q test (i.e., -25 Pa to +25 Pa) and the other for leakage pressures well outside this range. These effects are seen in experimental data taken with leakage at known pressures. However, extracting the signal of the leakage pressure from the surrounding noise caused by random measurement variation is likely to be a difficult problem in many cases.
Date: February 1, 2002
Creator: ANDREWS,J.W.
Partner: UNT Libraries Government Documents Department

LABORATORY EVALUATION OF THE DELTA Q TEST FOR DUCT LEAKAGE

Description: Using a residential-size duct system in a controlled laboratory setting, the repeatability and accuracy of the Delta Q test for air leakage in residential duct systems have been measured. More than 100 Delta Q tests were performed. These were compared with results using fan pressurization and also with results of a procedure (Delta Q Plus) that uses leakage hole-size information to select the leakage pressures to be used in the Delta Q algorithm. The average error in supply or return leakage for the fan-pressurization test was 6.4% of system fan flow. For the Delta Q test it was 3.4% of fan flow, while for Delta Q Plus it was 1.9% of fan flow.
Date: May 1, 2003
Creator: ANDREWS,J.W.
Partner: UNT Libraries Government Documents Department

105 K-West isolation barrier leak recovery plan

Description: Leak testing is being performed in 105 KW to verify the performance of the isolation barriers which have been recently installed. When an 11 inch differential head is established between the main basin and the discharge chute, a leak-rate of approximately 30 - 35 gpm is observed. The leak-rate would be achieved by a 1.65`` - 2`` diameter hole (or equivalent). Analyses suggest that the flow is turbulent/laminar transitional (dominantly turbulent), which would be indicative of a single point leak, typical of a pipe or large opening. However, local vortex rotation is observed in the entry to the West transfer chute while no observable motion was seen in the East transfer chute: this may be an indication of seal leakage in the East isolation barrier. The potential for leakage had been considered during the design and field work planning stages. Review of potential leak detection technologies had been made; at the planning stage it was determined that location specific leak detection could be established relatively quickly, applying existing K Basins technology (dye or ultrasonics). The decision was made not to pre-stage leak detection since the equipment development is highly dependent on the nature and location of the leak, and the characteristics of the leak rate provides data which guides leak characterization technology. The expense could be deferred and potentially avoided without risk to critical path activity. Consistent with the above, a systematic recovery plan has been developed utilizing phased activities to provide for management discipline combined with timely diagnosis and correction. Because this activity is not critical path at this time, activities will be coordinated with other plant activity to optimize overall plant work. Particular care will be exercised in assuring that information gained from this recovery can be utilized in the more critical work in 105 KE.
Date: March 2, 1995
Creator: Wiborg, J.C.
Partner: UNT Libraries Government Documents Department

Test report for drill string seal pressure test

Description: A basic question was asked concerning the drill string which is used in rotary Mode coring operations: ``...what is the volume leak rate loss in a drill rod string under varying condiditons of the joint boxes and pins being either dry or coated with lubricant...``. A Variation of this was to either have an o-ring installed or absent on the drill rod that was grooved on the pin. A series of tests were run with both the o-ring grooved Longyear drill rod and the plain pin end rod manufactured by Diamond Drill. Test results show that drill rod leakage of both types is lowered dramatically when thread lubricant is applied to the threaded joints and the joints made up tight. The Diamond Drill rod with no o-ring groove has virtually no leakage when used with thread lubricant and the joints are properly tightened.
Date: February 6, 1996
Creator: McCormick, J.F.
Partner: UNT Libraries Government Documents Department

ATR confinement leakage determination

Description: The air leakage rate from the Advanced Test Reactor (ATR) confinement is an important parameter in estimating hypothesized accidental releases of radiation to the environment. The leakage rate must be determined periodically to assure that the confinement has not degraded with time and such determination is one of the technical safety requirements of ATR operation. This paper reviews the methods of confinement leakage determination and presents an analysis of leakage determination under windy conditions, which can complicate the interpretation of the determined leakage rates. The paper also presents results of analyses of building air exchange under windy conditions. High wind can enhance air exchange and this could increase the release rates of radioisotopes following an accident.
Date: June 1, 1998
Creator: Kuan, P. & Buescher, B. J.
Partner: UNT Libraries Government Documents Department

Leakage test concerns for packagings with three-O-ring closure seals

Description: Recent radioactive packagings with three-O-ring closure seals, the middle O-ring being the containment seal, have the potential for false positive results from leakage rate tests. The volume between the containment O-ring and the inner O-ring is used for the helium gas required for the leakage rate tests, to reduce both the amount of helium used and the time for the tests. False positive results can be caused by either a large leakage in the containment sea/l or a leakage in the inner seal. This paper describes the problem, together with possible solutions/areas that need to be addressed in a Safety Analysis Report for Packaging.
Date: July 1, 1997
Creator: Oras, J.J.; Towell, R.H. & Wangler, M.E.
Partner: UNT Libraries Government Documents Department

SENSITIVITY OF THE HOUSE PRESSURE TEST FOR DUCT LEAKAGE TO VARIATIONS IN THE DISTRIBUTION OF AIR LEAKAGE IN THE HOUSE ENVELOPE

Description: The house pressure test for air leakage in ducts calculates the signed difference between the supply and return leakage from the response of the air pressure in the house to operation of the system fan. The currently accepted version of this calculation was based on particular assumptions about how the house envelope leakage is distributed between the walls, ceiling, and floor. This report generalizes the equation to account for an arbitrary distribution of envelope leakage. It concludes that the currently accepted equation is usually accurate to within {+-}5%, but in a small proportion of cases the results may diverge by 50% or more.
Date: December 1, 1998
Creator: ANDREWS,J.W.
Partner: UNT Libraries Government Documents Department

Contamination free helium leak detection of sensitive systems

Description: High Technology Systems (HTS) with sensitive surfaces, such as superconducting radio frequency (SRF) accelerating cavities, polarized electron sources (PES) for accelerators and many others, are prone to degradation when subjected to particulate or hydrocarbon contaminants. Particulate contamination control of SRF cavity surfaces and vacuum components have been discussed by several authors at this contamination workshop. Hydrocarbon contamination mainly results from prolonged evacuation with conventional oil lubricated pumping systems and/or prolonged leak detection with conventional leak detectors. The sensitivity of the conventional leak detectors suffers due to the back-streaming of atmospheric helium (5 x 10{sup {minus}1} Pa) through the pumping systems and/or the trapping of helium in the O-rings and oils of the pumping systems. This reduced sensitivity leads to the use of the leak detectors over long periods of time for detecting small (1 x 10{sup {minus}10} atm. cc s{sup {minus}1}) leaks in HTS thereby exposing the sensitive surfaces to contamination. In this paper, a review of the work in progress, at Thomas Jefferson Accelerator Facility (Jefferson Lab), in reducing the contamination of sensitive surfaces is presented.
Date: January 1, 1997
Creator: Myneni, G.
Partner: UNT Libraries Government Documents Department

TWO NEW DUCT LEAKAGE TESTS

Description: Two variations on the tests for duct leakage currently embodied in ASHRAE Standard 152P (Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems) are presented. Procedures are derived for calculating supply and return duct leakage to/from outside using these new variations. Results of these tests are compared with the original ones in Standard 152P on the basis of data collected in three New York State homes.
Date: December 1, 1998
Creator: ANDREWS,J.W.
Partner: UNT Libraries Government Documents Department

Qualification of box HEPA filters for nuclear applications

Description: We have successfully completed qualification tests on high efficiency particulate air (HEPA) filters that are encapsulated within a box and manufactured by American Air Filters. The qualification tests are required by the American Society of Mechanical Engineers Standard ASME N509 and the U.S. Military Standard MIL-F-51068 for HEPA filters to be used in nuclear applications. The qualification tests specify minimum filter efficiencies following exposure to heated air, overpressure, and rough handling. Prior to this study, no box HEPA filters from any manufacturer had been qualified despite their wide-spread use in Department of Energy (DOE) facilities. Box HEPA filters are not addressed in any of the existing HEPA standards and only briefly discussed in the Nuclear Air Cleaning Handbook.
Date: March 1, 1995
Creator: Bergman, W.; Larsen, G.; Wilson, K. & Rainer, F.
Partner: UNT Libraries Government Documents Department

A modified heat leak test facility employing a closed-cycle helium refrigerator

Description: A Heat Leak Test Facility (HLTF) has been in use at Fermilab for many years. The apparatus has successfully measured the thermal performance of a variety of cryostat components under simulated operating conditions. While an effective tool in the cryostat design process, the HLTF has several limitations. Temperatures are normally fixed at cryogen boiling points and run times are limited to cryogen inventory. Moreover, close personnel attention is required to maintain system inventories and sustain system equilibrium. To provide longer measurement periods without perturbation and to minimize personnel interaction, a new heat leak measurement facility (HLTF-2) has been designed that incorporates a closed-cycle helium refrigerator. The two-stage refrigerator provides cooling to the various temperature stations of the HLTF while eliminating the need for cryogens. Eliminating cryogen inventories has resulted in a reduction of the amount of direct personnel attention required.
Date: January 1, 1996
Creator: Boroski, W.N.
Partner: UNT Libraries Government Documents Department

Multi-Canister overpack ultrasonic examination of closure weld

Description: The method used for non-destructive examination of the closure weld must provide adequate assurance that the weld is structurally sound for the pressure and lifting loads to be imposed, and must be consistent with NRC equivalency requirements established for the SNF Project. Given the large flaw size that would need to exist before the structural integrity of the weld is challenged, liquid penetrant testing of the root and final passes provides adequate assurance of weld quality to meet structural loads. In addition, the helium leak test provides confirmation that the containment boundary is intact and leaktight. While UT examination does provide additional evidence of weld integrity, the value of that additional evidence for this particular application does not justify performing UT examination, given the additional financial and ALARA costs associated with performing the examination.
Date: November 3, 1998
Creator: SMITH, K.E.
Partner: UNT Libraries Government Documents Department

ANALYSIS OF MEASUREMENT UNCERTAINTIES IN THE NULLING TEST FOR AIR LEAKAGE FROM RESIDENTIAL DUCTS.

Description: An analysis of measurement uncertainties in a recently proposed method of measuring air leakage in residential duct systems has been carried out. The uncertainties in supply and return leakage rates are expressed in terms of the value of the envelope leakage flow coefficient and the uncertainties in measured pressures and air flow rates. Results of the analysis are compared with data published by two research groups.
Date: April 1, 2001
Creator: ANDREWS,J.W.
Partner: UNT Libraries Government Documents Department

105-KE Isolation Barrier Leak Rate Acceptance Test Report

Description: This Acceptance Test Report (ATR) contains the completed and signed Acceptance Procedure (ATP) for the 105-KE Isolations Barrier Leak Rate Test. The Test Engineer`s log, the completed sections of the ATP in the Appendix for Repeat Testing (Appendix K), the approved WHC J-7s (Appendix H), the data logger files (Appendices T and U), and the post test calibration checks (Appendix V) are included.
Date: June 14, 1995
Creator: McCracken, K. J.
Partner: UNT Libraries Government Documents Department

APS storage ring vacuum chamber: Section 1, Evaluation

Description: The vacuum characteristics of the APS storage ring vacuum chamber prototype, Section One (S1), is presented. The base pressure achieved was 4 {times} 10{sup {minus}11}, the welds contained no virtual or real leaks, the NeG strip mounting design and activation procedures have been determined, and S1 was found contaminated with hydrocarbons.
Date: July 1, 1995
Creator: Benaroya, R. & Roop, B.
Partner: UNT Libraries Government Documents Department