390 Matching Results

Search Results

Advanced search parameters have been applied.

INEEL Lead Recycling in a Moratorium Environment

Description: Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.
Date: February 1, 2003
Creator: Kooda, Kevin Evan; Mc Cray, Casey William; Aitken, Darren William & Galloway, Kelly
Partner: UNT Libraries Government Documents Department

Alternative TRUEX-Based Pretreatment Processing of INEEL Sodium Bearing Waste

Description: The goals of this study were to demonstrate a selective complexant for separating mercury from the transuranic (TRU) elements in the transuranic extraction (TRUEX) process and to demonstrate alternative stripping methods to eliminate phosphorus-containing, actinide stripping agents during TRUEX processing. The work described in this report provides the basis for implementing an improved TRUEX-based flowsheet for processing INEEL sodium-bearing waste using only minor modifications to the current Idaho National Engineering and Environmental Laboratory (INEEL) flowsheet design.
Date: September 27, 2000
Creator: Rapko, Brian M.; Fiskum, Sandra K. & Lumetta, Gregg J.
Partner: UNT Libraries Government Documents Department

Development of the INEEL Site Wide Vadose Zone Roadmap

Description: The INEEL Vadose Zone Roadmap was developed to identify inadquacies in current knowledge, to assist in contaminant management capabilities relative to the INEEL vadose zone, and to ensure that ongoing and planned Science and Technology developments will meet the risk management challenges facing the INEEL in coming years. The primary objective of the Roadmap is to determine the S&T needs that will facilitate monitoring, characterization, prediction, and assessment activities necessary to support INEEL risk management decisions and to ensure that long-term stewardship of contaminated sites at the INEEL is achieved. The mission of the Roadmap is to insure that the long-term S&T strategy is aligned with site programs, that it takes advantage of progress made to date, and that it can assist in meeting the milestones and budgets of operations.
Date: September 1, 2001
Creator: Yonk, Alan Keith
Partner: UNT Libraries Government Documents Department

Evaluating In Situ Treatment Technologies for Buried Mixed Waste Remediation at the INEEL

Description: Mixed radioactive and hazardous wastes were buried at the Department of Energy’s Idaho National Engineering and Environmental Laboratory (INEEL) Subsurface Disposal Area from 1952 to 1969. To begin the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) remediation process for the Subsurface Disposal Area, the Environmental Protection Agency (EPA) added the INEEL to its National Priorities List in 1989. DOE’s Office of Environmental Restoration is planning several CERCLA treatability studies of remedial technologies that will be evaluated for potential remediation of the buried waste in the Subsurface Disposal Area. This paper discusses the in situ treatability studies that will be performed, including in situ vitrification, in situ grouting, and in situ thermal desorption. The in situ treatability studies will be conducted on simulated and actual buried wastes at the INEEL in 1999 and 2000. Results from the treatability studies will provide substantial information on the feasibility, implementability, and cost of applying these technologies to the INEEL Subsurface Disposal Area. In addition, much of the treatability study data will be applicable to buried waste site remediation efforts across the DOE complex.
Date: March 1, 1999
Creator: Jorgensen, Douglas Kay; Nickelson, David Frank; Nickelson, Reva Anne; Farnsworth, Richard Kent & Jessmore, James Joseph
Partner: UNT Libraries Government Documents Department

Small Waste Tank Sampling and Retrieval System

Description: At the Test Reactor Area of the Idaho National Engineering and Environmental Laboratory (INEEL), four 1500-gal catch tanks were found to contain RCRAhazardous waste. A system was needed to obtain a representative sample of the liquid, as well as the hardpacked heels, and to ultimately homogenize and remove the tank contents for disposal. After surveying the available technologies, the AEA Fluidic Pulse Mixing and Retrieval System was chosen for a technology demonstration. A demonstration, conducted with nonhazardous surrogate material, proved that the system was capable of loosening the hard-packed heel, homogenizing the entire tank contents, and collecting a representative sample. Based on the success of the demonstration, a detailed evaluation was done to determine the applicability of the system to other tanks. The evaluation included the sorting of data on more than 700 tanks to select candidates for further deployment of the system. A detailed study was also done to determine if the purchase of a second system would be cost effective. The results of the evaluation indicated that a total of thirteen tanks at the INEEL are amenable to sampling and/or remediation using the AEA Fluidic Pulse Mixing and Retrieval System. Although the currently-owned system appears sufficient for the needs of one INEEL program, it is insufficient to meet the combined needs at the INEEL. The INEEL will commence operation of the system on the TRA-730 Catch Tank System in June 2002.
Date: August 1, 2002
Creator: Magleby, Mary Theresa
Partner: UNT Libraries Government Documents Department

Using the National Environmental Policy Act to Fight Wildland Fires on the Idaho National Engineering and Environmental Laboratory

Description: The decade of the 90s saw an average of 106,000 wildland fires each year, resulting in an average yearly loss of 3.7 million acres across the United States. The total number of acres burned during the past decade exceeded 36 million acres (about 57 thousand square miles). This is an area about the size of the state of Iowa. The impact from wildland fires on federal lands came to the nation’s attention in May of 2000, when the "Cerro Grande" fire near Los Alamos, New Mexico burned 47,650 acres while destroying 235 structures. Firefighting activities for federal agencies alone exceeded 1.3 billion dollars in 2000. The dollar amount spent on firefighting does not approach the dollars lost in terms of timber resources, homes, and wildlife habitat. Following several fires on U. S. Department of Energy lands, the Deputy Secretary of Energy placed a moratorium on "prescribed burns" in June 2000. From 1994 to 2000, about 130,000 acres of the INEEL (or the Site) and several hundred thousand acres of surrounding Bureau of Land Management lands burned on the Snake River Plain of southeast Idaho. The fires on the INEEL threatened facilities and exposed soils to wind erosion, resulting in severe dust storms, affecting operations and creating traffic hazards for weeks. Most of the acreage burned on the Site between 1994 and 2000 is recovering well. With the exception of sagebrush, most native plant species are recovering. However, cheatgrass, a non-native species is a component. In isolated areas, cheatgrass and other annual non-native weeds are dominant. If this situation persists and the Site does not change the way it manages wildland fires, and there is no intervention to reduce cheatgrass and manage for sagebrush, the Site may transition from sagebrush steppe to cheatgrass. This would have cascading effects not only on ...
Date: June 1, 2003
Creator: Irving, John S
Partner: UNT Libraries Government Documents Department

Oil Bypass Filter Technology Evaluation, Fourth Quarterly Report, July--September 2003

Description: This fourth Oil Bypass Filter Technology Evaluation report details the ongoing fleet evaluation of an oil bypass filter technology by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy’s FreedomCAR & Vehicle Technologies Program. Eight four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass filter systems from the puraDYN Corporation. The bypass filters are reported to have engine oil filtering capability of <1 micron and a built-in additive package to facilitate extended oil-drain intervals. To date, the eight buses have accumulated 259,398 test miles. This represents an avoidance of 21 oil changes, which equates to 740 quarts (185 gallons) of oil not used or disposed of. To validate the extended oil-drain intervals, an oil-analysis regime evaluates the fitness of the oil for continued service by monitoring the presence of necessary additives, undesirable contaminants, and engine-wear metals. For bus 73450, higher values of iron have been reported, but the wear rate ratio (parts per million of iron per thousand miles driven) has remained consistent. In anticipation of also evaluating oil bypass systems on six Chevrolet Tahoe sport utility vehicles, the oil is being sampled on each of the Tahoes to develop a characterization history or baseline for each engine.
Date: November 1, 2003
Creator: Francfort, James E. & Zirker, Larry
Partner: UNT Libraries Government Documents Department

Controlled-aperture wave-equation migration

Description: We present a controlled-aperture wave-equation migration method that no1 only can reduce migration artiracts due to limited recording aperlurcs and determine image weights to balance the efl'ects of limited-aperture illumination, but also can improve thc migration accuracy by reducing the slowness perturbations within thc controlled migration regions. The method consists of two steps: migration aperture scan and controlled-aperture migration. Migration apertures for a sparse distribution of shots arc determined using wave-equation migration, and those for the other shots are obtained by interpolation. During the final controlled-aperture niigration step, we can select a reference slowness in c;ontrollecl regions of the slowness model to reduce slowncss perturbations, and consequently increase the accuracy of wave-equation migration inel hods that makc use of reference slownesses. In addition, the computation in the space domain during wavefield downward continuation is needed to be conducted only within the controlled apertures and therefore, the computational cost of controlled-aperture migration step (without including migration aperture scan) is less than the corresponding uncontrolled-aperture migration. Finally, we can use the efficient split-step Fourier approach for migration-aperture scan, then use other, more accurate though more expensive, wave-equation migration methods to perform thc final controlled-apertio.ee migration to produce the most accurate image.
Date: January 1, 2003
Creator: Huang, L. (Lian-Jie); Fehler, Michael C.; Sun, H. (Hongchuan) & Li, Z. (Zhiming)
Partner: UNT Libraries Government Documents Department

INL Sitewide Institutional Controls Annual Report FY2006

Description: This document reports the results of the fiscal year 2006 institutional controls assessment at Comprehensive Environmental Response, Compensation, and Liability Act sites at the Idaho National Laboratory. These activities are described in the INEEL Sitewide Institutional Control Plan. Inspections were performed by Long-term Stewardship Program personnel with representatives of the various facilities. The assessments showed that the various institutional control measures in place across the Idaho National Laboratory Site are functioning as intended. Information in the Idaho National Engineering and Environmental Laboratory Comprehensive Facilities and Land Use Plan was reviewed as part of the annual assessment and was revised as needed to reflect the current status of the institutional control sites.
Date: August 1, 2006
Creator: Jolley, W. L.
Partner: UNT Libraries Government Documents Department

INL Sitewide Operations and Maintenance Report for CERCLA Response Actions - FY2006

Description: This report documents how remedies mandated by the Comprehensive Environmental Response, Compensation, and Liability Act for the Idaho National Laboratory Site were operated and maintained during Fiscal Year 2006. The activities addressed in the INEEL Sitewide Operations and Maintenance Plan are reported in this document.
Date: October 2, 2006
Creator: Olaveson, B. E.
Partner: UNT Libraries Government Documents Department

Microtopographic Analysis of Part-Through Crack Growth in Alloy 304L Plate-type Tension Specimens

Description: The Idaho National Engineering and Environmental Laboratory (INEEL) used their microtopography analysis method to examine the fracture process in two Type 304 stainless steel, part-through crack, plate-type specimens. The two specimens had different initial defect geometries – one being nearly semicircular and moderately deep, the other being longer and shallower. The microtopographic analysis allowed determination of parameters such as: the crack tip opening displacement at initiation; the crack tip opening angle during ductile tearing; the crack mouth opening at through-thickness penetration; and, the incremental crack front profiles throughout the crack growth process. In essence, these data provide a nearly complete description of the entire ductile fracture process for the two cases examined. We describe the microtopographic analysis procedure as it was applied to these two specimens. Crack growth profiles predicted by the microtopography analysis are compared with those shown by heat tinting of the actual fracture subsurface, showing excellent agreement. Several areas of ductile crack growth theory relevant to the microtopographic method of analysis are discussed, including possible effects on the accuracy of the analyses. The accuracy of the resultant data is reviewed, and found acceptable or better. Areas for additional development of the microtopography method to improve accuracy in three-dimensional ductile fracture analysis are identified.
Date: April 1, 2003
Creator: Lloyd, W. R.; Steffler, E. D. & Jackson, J. H.
Partner: UNT Libraries Government Documents Department

Mobile Robotic Teams Applied to Precision Agriculture

Description: The Idaho National Engineering and Environmental Laboratory (INEEL) and Utah State University’s Center for Self-Organizing and Intelligent Systems (CSOIS) have developed a team of autonomous robotic vehicles applicable to precision agriculture. A unique technique has been developed to plan, coordinate, and optimize missions in large structured environments for these autonomous vehicles in realtime. Two generic tasks are supported: 1) Driving to a precise location, and 2) Sweeping an area while activating on-board equipment. Sensor data and task achievement data is shared among the vehicles enabling them to cooperatively adapt to changing environmental, vehicle, and task conditions. This paper discusses the development of the autonomous robotic team, details of the mission-planning algorithm, and successful field demonstrations at the INEEL.
Date: April 1, 1999
Creator: Anderson, Matthew Oley; Kinoshita, Robert Arthur; Mckay, Mark D; Willis, Walter David; Gunderson, R.W. & Flann, N.S.
Partner: UNT Libraries Government Documents Department

Development of a dc Motor Model and an Actuator Efficiency Model

Description: For the past several years, researchers at the Idaho National Engineering and Environmental Laboratory, under the sponsorship of the U.S. Nuclear Regulatory Commission, have been investigating the ability of motor-operated valves (MOVs) used in Nuclear Power Plants to close or open when subjected to design basis flow and pressure loads. Part of this research addresses the response of a dcpowered motor-operated gate valve to assess whether it will achieve flow isolation and to evaluate whether it will slow down excessively under design-basis conditions and thus fail to achieve the required stroke time. As part of this research, we have developed a model of a dc motor operating under load and a model of actuator efficiency under load based on a first principle evaluation of the equipment. These models include the effect that reduced voltage at the Motor Control Center and elevated containment temperatures have on the performance of a dc powered MOV. The model also accounts for motor torque and speed changes that result from the heatup of the motor during the stroke. These models are part of the Motor- Operated Valve In Site Test Assessment (MISTA) software which is capable of independently evaluating the ability of dc-powered motoroperated gate valves to achieve flow isolation and to meet required stroke times under design-basis conditions. This paper presents an overview of the dc motor model and the actuator efficiency under load model. The paper then compares the analytical results from the models with the results of actual dc motor and actuator testing, including comparisons of the effect reduced voltage, elevated containment temperature, and motor heating during the stroke have on an MOV.
Date: July 1, 2001
Creator: Watkins, John Clifford; Mc Kellar, Michael George & DeWall, Kevin George
Partner: UNT Libraries Government Documents Department

Removal of Mercury from the Off-Gas from Thermal Treatment of Radioactive Liquid Waste

Description: Acidic, radioactive wastes with a high nitrate concentration, and containing mercury are currently being stored at the Idaho Nuclear Technology and Engineering Center (INTEC). In the past, these wastes were converted into a dry, granular solid by a high temperature fluidized-bed calcination process. In the future, the calcined solids may be immobilized by a vitrification process prior to disposal. It has been proposed that a vitrification facility be built to treat the acidic wastes, as well as the calcined solids. As was the case with the calcination process, NOx levels in the vitrification off-gas are expected to be high, and mercury emissions are expected to exceed the Maximum Control Technology (MACT) limits. Mitigation of mercury emissions by wet scrubbing, followed by adsorption onto activated carbon is being investigated. Scoping tests with sulfur-impregnated activated carbon, KCl-impregnated activated carbon and non-impregnated activated carbon were conducted with a test gas containing1% NO2, 28% H2O, 4% O2 and 67% N2. Average removal efficiencies for Hgo and HgCl2 were 100 ± 2.5% and 99 ± 3.6% respectively, for sulfur-impregnated carbon. The KCl-impregnated carbon removed 99 ± 4.6% HgCl2. The removal efficiency of the non-impregnated carbon was 99 ± 3.6% for HgCl2. No short-term detrimental effects due to NO2 and H2O were observed. These results indicate that, placed downstream of a wet scrubber, an activated carbon adsorption bed has the potential of reducing mercury levels sufficiently to enable compliance with the MACT limit. Long-term exposure tests, and bed size optimization studies are planned for the future.
Date: May 1, 2001
Creator: Deldebbio, John Anthony & Olson, Lonnie Gene
Partner: UNT Libraries Government Documents Department

Determination of Background Uranium Concentration in the Snake River Plain Aquifer under the Idaho National Engineering and Environmental Laboratory&#39;s Radioactive Waste Management Complex

Description: Uranium occurs naturally in the environment and is also a contaminant that is disposed of at the Radioactive Waste Management Complex (RWMC) at the Idaho National Engineering and Environmental Laboratory. To determine whether uranium concentrations in the Snake River Plain Aquifer, which underlies the laboratory, are elevated as a result of migration of anthropogenic uranium from the Subsurface Disposal Area in the RWMC, uranium background concentrations are necessary. Guideline values are calculated for total uranium, 234U, 235U, and 238U from analytical results from up to five datasets. Three of the datasets include results of samples analyzed using isotope dilution thermal ionization mass spectrometry (ID-TIMS) and two of the datasets include results obtained using alpha spectrometry. All samples included in the statistical testing were collected from aquifer monitoring wells located within 10 miles of the RWMC. Results from ID-TIMS and alpha spectrometry are combined when the data are not statistically different. Guideline values for total uranium were calculated using four of the datasets, while guideline values for 234U were calculated using only the alpha spectrometry results (2 datasets). Data from all five datasets were used to calculate 238U guideline values. No limit is calculated for 235U because the ID-TIMS results are not useful for comparison with routine monitoring data, and the alpha spectrometry results are too close to the detection limit to be deemed accurate or reliable for calculating a 235U guideline value. All guideline values presented represent the upper 95% coverage 95% confidence tolerance limits for background concentration. If a future monitoring result is above this guideline, then the exceedance will be noted in the quarterly monitoring report and assessed with respect to other aquifer information. The guidelines (tolerance limits) for total U, 234U, and 238U are 2.75 pCi/L, 1.92 pCi/L, and 0.90 pCi/L, respectively.
Date: June 1, 2003
Creator: Leecaster, Molly K.; Koeppen, L. Don & Olson, Gail L.
Partner: UNT Libraries Government Documents Department

INL SITEWIDE INSTITUTIONAL CONTROLS, AND OPERATIONS AND MAINTENANCE PLAN FOR CERCLA RESPONSE ACTIONS

Description: On November 9, 2002, the U.S. Environmental Protection Agency, the U.S. Department of Energy, and the Idaho Department of Environmental Quality approved the 'Record of Decision Experimental Breeder Reactor-I/Boiling Water Reactor Experiment Area and Miscellaneous Sites', which required a Site-wide institutional controls plan for the then Idaho National Engineering and Environmental Laboratory (now known as the Idaho National Laboratory). This document, first issued in June 2004, fulfilled that requirement. This revision identifies and consolidates the institutional controls and operations and maintenance requirements into a single document.
Date: February 5, 2008
Creator: Jolley, Wendell L.
Partner: UNT Libraries Government Documents Department

Deactivation, Decontamination and Decommissioning Project Summaries

Description: This report is a compilation of summary descriptions of Deactivation, Decontamination and Decommissioning, and Surveillance and Maintenance projects planned for inactive facilities and sites at the INEEL from FY-2002 through FY-2010. Deactivations of contaminated facilities will produce safe and stable facilities requiring minimal surveillance and maintenance pending further decontamination and decommissioning. Decontamination and decommissioning actions remove contaminated facilities, thus eliminating long-term surveillance and maintenance. The projects are prioritized based on risk to DOE-ID, the public, and the environment, and the reduction of DOE-ID mortgage costs and liability at the INEEL.
Date: July 1, 2001
Creator: Peterson, David Shane & Webber, Frank Laverne
Partner: UNT Libraries Government Documents Department

Detection and Location of Damage on Pipelines

Description: The INEEL has developed and successfully tested a real-time pipeline damage detection and location system. This system uses porous metal resistive traces applied to the pipe to detect and locate damage. The porous metal resistive traces are sprayed along the length of a pipeline. The unique nature and arrangement of the traces allows locating the damage in real time along miles of pipe. This system allows pipeline operators to detect damage when and where it is occurring, and the decision to shut down a transmission pipeline can be made with actual real-time data, instead of conservative estimates from visual inspection above the area.
Date: November 1, 2003
Creator: Moore, Karen A.; Carrington, Robert & Richardson, John
Partner: UNT Libraries Government Documents Department

Permeability Modification Using a Reactive Alkaline-Soluble Biopolymer

Description: Polymer injection has been used in reservoirs to alleviate contrasting permeability zones. Current technology relies on the use of cross-linking agents to initiate gelation. The use of biological polymers are advantageous in that they can block high permeability areas, are environmentally friendly, and have potential to form reversible gels without the use of hazardous cross-linkers. Recent efforts at the Idaho National Engineering and Environmental Laboratory (INEEL) have produced a reactive alkaline-soluble biopolymer from Agrobacterium sp. ATCC no. 31749 that gels upon decreasing the pH of the polymeric solution. The focus of this study was to determine the impact an alkaline-soluble biopolymer can have on sandstone permeability. Permeability modification was investigated by injecting solubilized biopolymer into Berea sandstone cores and defining the contribution of pH, salt, temperature, and Schuricht crude oil on biopolymer gelation. The biopolymer was soluble in KOH at a pH greater than 11.4 and gelled when the pH dropped below 10.8. The Berea sandstone core buffered the biopolymer solution, decreasing the pH sufficiently to form a gel, which subsequently decreased the permeability. The effluent pH of the control cores injected with 0.01 {und M} KOH (pH 12.0) and 0.10{und M} KOH (pH 13.0) decreased to 10.6 and 12.7, respectively. The permeability of the sandstone core injected with biopolymer was decreased to greater than 95% of the original permeability at 25 C in the presence of 2% NaCl, and Schuricht crude oil; however, the permeability increased when the temperature of the core was increased to 60 C. Residual resistance factors as high as 792 were seen in Berea cores treated with biopolymer. The buffering capacity of sandstone has been demonstrated to reduce the pH of a biopolymer solution sufficiently to cause the polymer to form a stable in-situ gel. This finding could potentially lead to alternate technology for permeability ...
Date: October 1, 2003
Creator: Fox, Snadra L.; Xie, X.; Schaller, K. D.; Robertson, E. P. & Bala, G. A.
Partner: UNT Libraries Government Documents Department

Novel Threat-risk Index Using Probabilistic Risk Assessment and Human Reliability Analysis - Final Report

Description: In support of a national need to improve the current state-of-the-art in alerting decision makers to the risk of terrorist attack, a quantitative approach employing scientific and engineering concepts to develop a threat-risk index was undertaken at the Idaho National Engineering and Environmental Laboratory (INEEL). As a result of this effort, a set of models has been successfully integrated into a single comprehensive model known as Quantitative Threat-Risk Index Model (QTRIM), with the capability of computing a quantitative threat-risk index on a system level, as well as for the major components of the system. Such a threat-risk index could provide a quantitative variant or basis for either prioritizing security upgrades or updating the current qualitative national color-coded terrorist threat alert.
Date: February 1, 2004
Creator: Beitel, George A.
Partner: UNT Libraries Government Documents Department

Sage-Grouse Lek Guideline Review Report

Description: On April 21, 2011, an Idaho National Laboratory (INL) Land Use Committee meeting was convened to support a Department of Energy Idaho Operations Office (DOE-ID) unofficial request to obtain Land Use Committee comments pertaining to the proposed Sage-Grouse Breeding Habitat Regulations. Two documents were provided from DOE-ID pertaining to the proposed regulations: “Guidelines for INL Site Activities within Sage-grouse Breeding Habitat” and “Guidelines for New Infrastructure Development and Future Activities on the INL Site.” The INL Land Use Committee agreed to conduct this unofficial review in the spirit of collaboration between DOE-ID and the INL Land Use Committee. However, through this cursory review, significant concerns were raised regarding the guidelines, INL financial obligations, and the draft Candidate Conservation Agreement, which was not part of the requested review but is referred to by the guideline. Therefore, it is the position of the INL Land Use Committee, based on the issues raised in its cursory review, that DOE-ID request INL (through contractual channels) to conduct a formal review of the draft Candidate Conservation Agreement and guidelines. A formal review would allow ample time to thoroughly review the extensive draft regulations, identify areas of concern, and establish impacts (e.g., cost and project delays).
Date: May 1, 2011
Creator: Reisenauer, John
Partner: UNT Libraries Government Documents Department

Capabilities to Support Thermochemical Hydrogen Production Technology Development

Description: This report presents the results of a study to determine if Idaho National Laboratory (INL) has the skilled staff, instrumentation, specialized equipment, and facilities required to take on work in thermochemical research, development, and demonstration currently being performed by the Nuclear Hydrogen Initiative (NHI). This study outlines the beneficial collaborations between INL and other national laboratories, universities, and industries to strengthen INL's thermochemical efforts, which should be developed to achieve the goals of the NHI in the most expeditious, cost effective manner. Taking on this work supports INL's long-term strategy to maintain leadership in thermochemical cycle development. This report suggests a logical path forward to accomplish this transition.
Date: May 1, 2009
Creator: Ginosar, Daniel M.
Partner: UNT Libraries Government Documents Department

Idaho National Laboratory 2013-2022 Ten-Year Site Plan

Description: The Idaho National Laboratory (INL) Ten-Year Site Plan (TYSP) describes the strategy for accomplishing the long-term objective of transforming the laboratory to meet Department of Energy (DOE) national nuclear research and development (R&D) goals, as outlined in DOE strategic plans. The plan links R&D mission goals and INL core capabilities with infrastructure requirements (single- and multi-program), establishs the 10-year end-state vision for INL complexes, and identifies and prioritizes infrastructure needs and capability gaps. The TYSP serves as the basis for documenting and justifying infrastructure investments proposed as part of the FY 2013 budget formulation process.
Date: June 1, 2011
Creator: Ozaki, Calvin; Morton, Sheryl L.; Connell, Elizabeth A.; Buyers, William T.; Jacobson, Craig L.; Mullen, Charles T. et al.
Partner: UNT Libraries Government Documents Department

Idaho National Laboratory Cultural Resource Monitoring Report for FY 2010

Description: This report describes the cultural resource monitoring activities of the Idaho National Laboratory’s (INL) Cultural Resource Management (CRM) Office during fiscal year 2010 (FY 2010). Throughout the year, thirty-three cultural resource localities were revisited, including somethat were visited more than once, including: two locations with Native American human remains, one of which is a cave, two additional caves, twenty-six prehistoric archaeological sites, two historic stage stations, and Experimental Breeder Reactor-I, which is a designated National Historic Landmark. The resources that were monitored included seventeen that are routinely visited and sixteen that are located in INL project areas. Although impacts were documented at a few locations and one trespassing incident (albeit sans formal charges) was discovered, no significant adverse effects that would threaten the National Register eligibility of any resources were observed. Monitoring also demonstrated that several INL projects generally remain in compliance with recommendations to protect cultural resources.
Date: October 1, 2010
Creator: Office, INL Cultural Resource Management
Partner: UNT Libraries Government Documents Department