18 Matching Results

Search Results

Advanced search parameters have been applied.

Thomson scattering from inertial confinement fusion plasmas

Description: Thomson scattering has been developed at the Nova laser facility as a direct and accurate diagnostic to characterize inertial confinement fusion plasmas. Flat disks coated with thin multilayers of gold and beryllium were with one laser beam to produce a two ion species plasma with a controlled amount of both species. Thomson scattering spectra from these plasmas showed two ion acoustic waves belonging to gold and beryllium. The phase velocities of the ion acoustic waves are shown to be a sensitive function of the relative concentrations of the two ion species and are in good agreement with theoretical calculations. These open geometry experiments further show that an accurate measurement of the ion temperature can be derived from the relative damping of the two ion acoustic waves. Subsequent Thomson scattering measurements from methane-filled, ignition-relevant hohlraums apply the theory for two ion species plasmas to obtain the electron and ion temperatures with high accuracy. The experimental data provide a benchmark for two-dimensional hydrodynamic simulations using LASNEX, which is presently in use to predict the performance of future megajoule laser driven hohlraums of the National Ignition Facility (NIF). The data are consistent with modeling using significantly inhibited heat transport at the peak of the drive. Applied to NIF targets, this flux limitation has little effect on x- ray production. The spatial distribution of x-rays is slightly modified but optimal symmetry can be re-established by small changes in power balance or pointing. Furthermore, we find that stagnating plasma regions on the hohlraum axis are well described by the calculations. This result implies that stagnation in gas-filled hohlraums occurs too late to directly affect the capsule implosion in ignition experiments.
Date: July 8, 1997
Creator: Glenzer, S.H.; Back, C.A. & Suter, L.J.
Partner: UNT Libraries Government Documents Department

Development and application of thin-layer spectroelectrochemical techniques for the study of organosulfur monolayers adsorbed at gold

Description: A main research interest is the characterization of monolayers formed by the spontaneous adsorption of organosulfur compounds at gold. This dissertation describes the development and application of long optical pathlength thin-layer spectroelectrochemistry in an attempt to address key issues regarding the reactivity of surface-immobilized molecules. The first section of this introductory chapter briefly describes the general approach to the preparation and characterization of these films. The last section provides an overview of the main principles and advantages of thin-layer spectroelectrochemistry for studying surface-adsorbed species. The body of this dissertation is divided into four chapters. Chapter 2 consists of a paper describing the design, construction, and characterization of a cuvette-based LOPTLC. Chapter 3 is a paper which examines the reductive desorption process using thin-layer spectroelectrochemistry to monitor and identify the desorption product. Chapter 4 is a paper describing the characterization of monolayers functionalized with a catechol terminal group which serves as a redox transformable coordination site for metal ion binding. Chapter 5 discusses the application of thin-layer spectroelectrochemistry to acid-base reactivity studies of surface-immobilized molecules. The final section provides some general conclusions and a prospectus for future studies. These chapters have been processed separately for inclusion on the data base. This report contains the introduction, references, and general conclusions. 78 refs.
Date: October 8, 1997
Creator: Simmons, N.
Partner: UNT Libraries Government Documents Department

Equilibrium binding studies of mono, di and triisocyanide ligands on Au powder surfaces

Description: The author`s group has previously shown that isocyanides are readily adsorbed from solutions to Au powder and bind to the Au surface in an end-on fashion through the terminal carbon. Later work demonstrated that the equilibrium constants for the reversible adsorption of electronically inequivalent isocyanides could be obtained using the Langmuir isotherm technique. This dissertation describes two projects completed which complement the initial findings of this group. Initially, several alkylisocyanides were synthesized to examine the effect of tail length on Au powder adsorption. It was observed that the length of the alkyl chain affected not only the Au surface binding affinity, but also the rate of surface saturation and saturation coverage values. Direct competition studies were also studied using a {sup 13}C-labeled isocyanide. These studies demonstrated the stabilization afforded by substrate-substrate packing forces in SAM`s formed by the longer chain isocyanides. In a second study, di and triisocyanides were synthesized to determine the effect that the length of the connecting link and the number of isocyanide groups (as points of attachment) have on Au adsorption stability. The work in this area describes the binding modes, relative binding affinities and surface coverage values for a series of flexible alkyl and xylyldiisocyanides on Au powder surfaces. This report contains only the introductory material, and general summary. Two chapters have been processed separately. 56 refs.
Date: October 8, 1997
Creator: Ontko, A.
Partner: UNT Libraries Government Documents Department

Separation of ions in acidic solution by capillary electrophoresis

Description: Capillary electrophoresis (CE) is an effective method for separating ionic species according to differences in their electrophoretic mobilities. CE separations of amino acids by direct detection are difficult due to their similar electrophoretic mobilities and low absorbances. However, native amino acids can be separated by CE as cations at a low pH by adding an alkanesulfonic acid to the electrolyte carrier which imparts selectivity to the system. Derivatization is unnecessary when direct UV detection is used at 185 nm. Simultaneous speciation of metal cations such as vanadium (IV) and vanadium (V) can easily be performed without complexation prior to analysis. An indirect UV detection scheme for acidic conditions was also developed using guanidine as the background carrier electrolyte (BCE) for the indirect detection of metal cations. Three chapters have been removed for separate processing. This report contains introductory material, references, and general conclusions. 80 refs.
Date: October 8, 1997
Creator: Thornton, M.
Partner: UNT Libraries Government Documents Department

Thomson scattering in the corona of laser-produced gold plasmas

Description: Thomson scattering measurements of the electron temperature in laser- produced gold plasmas are presented. We irradiated a flat gold disk target with one laser beam of the Nova laser facility. A second laser beam probed the plasma at a distance of 500{mu}m with temporally resolved Thomson scattering. The electron temperature measurements are compared with hydrodynamic simulations using the code LASNEX for experiments applying smoothed and unsmoothed heater beams. In case of an unsmoothed heater beam the simulations predict temperatures which are about 40% higher than our measured data. Although the agreement is improved for a smoothed heater beam, discrepancies exist in the decay phase of the plasma. We discuss possible explanations for these observations.
Date: May 8, 1996
Creator: Glenzer, S.H.; Back, C.A.; Estabrook, K.G. & MacGowan, B.J.
Partner: UNT Libraries Government Documents Department

The liquid to vapor phase transition in excited nuclei

Description: For many years it has been speculated that excited nuclei would undergo a liquid to vapor phase transition. For even longer, it has been known that clusterization in a vapor carries direct information on the liquid-vapor equilibrium according to Fisher's droplet model. Now the thermal component of the 8 GeV/c pion + 197 Au multifragmentation data of the ISiS Collaboration is shown to follow the scaling predicted by Fisher's model, thus providing the strongest evidence yet of the liquid to vapor phase transition.
Date: May 8, 2001
Creator: Elliott, J.B.; Moretto, L.G.; Phair, L.; Wozniak, G.J.; Beaulieu, L.; Breuer, H. et al.
Partner: UNT Libraries Government Documents Department

[News Clip: DEA Gold]

Description: B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story. This story aired at 6pm.
Date: December 8, 1988, 6:00 p.m.
Creator: KXAS-TV (Television station : Fort Worth, Tex.)
Partner: UNT Libraries Special Collections

Laser Created Relativistic Positron Jets

Description: Electron-positron jets with MeV temperature are thought to be present in a wide variety of astrophysical phenomena such as active galaxies, quasars, gamma ray bursts and black holes. They have now been created in the laboratory in a controlled fashion by irradiating a gold target with an intense picosecond duration laser pulse. About 10{sup 11} MeV positrons are emitted from the rear surface of the target in a 15 to 22-degree cone for a duration comparable to the laser pulse. These positron jets are quasi-monoenergetic (E/{delta}E {approx} 5) with peak energies controllable from 3-19 MeV. They have temperatures from 1-4 MeV in the beam frame in both the longitudinal and transverse directions. Positron production has been studied extensively in recent decades at low energies (sub-MeV) in areas related to surface science, positron emission tomography, basic antimatter science such as antihydrogen experiments, Bose-Einstein condensed positronium, and basic plasma physics. However, the experimental tools to produce very high temperature positrons and high-flux positron jets needed to simulate astrophysical positron conditions have so far been absent. The MeV temperature jets of positrons and electrons produced in our experiments offer a first step to evaluate the physics models used to explain some of the most energetic phenomena in the universe.
Date: October 8, 2009
Creator: Chen, H; Wilks, S C; Meyerhofer, D D; Bonlie, J; Chen, C D; Chen, S N et al.
Partner: UNT Libraries Government Documents Department

Probing the Conformational Distributions of Sub-Persistence Length DNA

Description: We have measured the bending elasticity of short double-stranded DNA (dsDNA) chains through small-angle X-ray scattering from solutions of dsDNA-linked dimers of gold nanoparticles. This method, which does not require exertion of external forces or binding to a substrate, reports on the equilibrium distribution of bending fluctuations, not just an average value (as in ensemble FRET) or an extreme value (as in cyclization), and in principle provides a more robust data set for assessing the suitability of theoretical models. Our experimental results for dsDNA comprising 42-94 basepairs (bp) are consistent with a simple worm-like chain model of dsDNA elasticity, whose behavior we have determined from Monte Carlo simulations that explicitly represent nanoparticles and their alkane tethers. A persistence length of 50 nm (150 bp) gave a favorable comparison, consistent with the results of single-molecule force-extension experiments on much longer dsDNA chains, but in contrast to recent suggestions of enhanced flexibility at these length scales.
Date: June 8, 2009
Creator: Mastroianni, Alexander; Sivak, David; Geissler, Phillip & Alivisatos, Paul
Partner: UNT Libraries Government Documents Department

FISSION OF GOLD BY CARBON IONS

Description: Angular distribution and kinetic-energy spectra of fragments, and cross sections for fission of gold with 68- to 124-Mev C{sup 12} ions have been obtained by observation of the fragments in two types of detectors, gas scintillation chambers and silicon p-n junctions. From the parameters used to fit the angular distributions to the theoretical curves of Halpern and Strutinski, we have obtained the average excitation energy of the fissioning nucleus at the time of fission. This quantity is approximately 25 Mev, which is nearly independent of bombarding energy, suggesting that fission is preceded by the emission of several particles from the compound nucleus. The fission cross section increases from a value of 100 mb at 68 Mev to 1.28 b. at 124 Mev. Over this range of bombarding energies, the total fragment kinetic-energy release rises from 142 {+-} 6 to 146 {+-} 6 Mev. At all bombarding energies, the variation of laboratory-system kinetic energy of the fragments with laboratory-system angle indicates full momentum transfer by the bombarding particle to the fissioning system.
Date: June 8, 1960
Creator: Gordon, Glen E.; Larsh, Almon E.; Sikkeland, Torbjorn & Seaborg,Glenn T.
Partner: UNT Libraries Government Documents Department

CO Oxidation mechanism on CeO2-supported Au nanoclusters

Description: To reveal the richer chemistry of CO oxidation by CeO2 supported Au Nanoclusters(NCs)/Nanoparticles, we design Au13 and Au12 supported on a flat and a stepped-CeO2 model (Au/CeO2) and study various kinds of CO oxidation mechanisms at the Au-CeO2 interface and the Au NC as well.
Date: September 8, 2013
Creator: Y., Kim H. & Henkelman, G.
Partner: UNT Libraries Government Documents Department

Raman Spectroscopy and instrumentation for monitoring soil carbon systems.

Description: This work describes developments in the application of Raman scattering and surface-enhanced Raman scattering (SERS) towards the assessment/characterization of carbon in soil. In the past, the nonspecific total carbon mass content of soil samples has generally been determined through mass loss techniques and elemental analysis. However, because of the concern over CO{sub 2} buildup in the atmosphere and its possible role in the ''Greenhouse Effect,'' there is a need for better-defined models of global cycling of carbon. As a means towards this end, there is a need to know more about the structure and functionality of organic materials in soil. Raman spectroscopy may therefore prove to be an exceptional tool in soil carbon analysis. Based on vibrational transitions of irradiated molecules, it provides structural information that is often suitable for sample identification. Furthermore, Raman scattering yields very fine spectral features which offer the potential for multicomponent sample analysis with minimal or no sample pretreatment. Although the intensity of Raman scattering is generally extremely low, the surface-enhanced Raman scattering (SERS) effect can greatly enhance Raman signals (10{sup 6}-10{sup 8} range) through the adsorption of compounds on specially roughened metal surfaces. In our laboratory, we have investigated copper, gold and silver as possible substrate metals in the fabrication of SERS substrates. These substrates have included metal-coated microparticles, metal island films, and redox-roughened metal foils. We have evaluated several laser excitation sources spanning the 515-785 nm range for both Raman and SERS analysis. For this particular study, we have selected fulvic and humic acids as models for establishing the feasibility of using Raman and SERS in soil carbon analysis. Our studies thus far have demonstrated that copper substrates perform best in the SERS detection of humic and fulvic acids, particularly when coupled to electrochemical processes that enhance adsorption of specific compounds. This effect ...
Date: December 8, 2003
Creator: Stokes, D.L.
Partner: UNT Libraries Government Documents Department

RHIC low-energy challenges and plans

Description: Future Relativistic Heavy Ion Collider (RHIC) runs, including a portion of FY10 heavy ion operations, will explore collisions at center of mass energies of 5-50 GeV/n (GeV/nucleon). Operations at these energies is motivated by the search for a possible QCD phase transition critical point. The lowest end of this energy range is nearly a factor of four below the nominal RHIC injection center of mass energy {radical}s = 19.6 GeV/n. There are several operational challenges in the RHIC low-energy regime, including harmonic number changes, small longitudinal acceptance, lowered magnet field quality, nonlinear orbit control, and luminosity monitoring. We report on the experience with these challenges during beam tests with gold beams in March 2008. This includes first operations at {radical}s = 9.18 GeV/n, first beam experience at {radical}s = 5 GeV/n, and luminosity projections for near-term operations.
Date: June 8, 2009
Creator: Satogata,T.; Ahrens, L.; Bai, M.; Brennan, J.M.; Bruno, D.; Butler, J. et al.
Partner: UNT Libraries Government Documents Department

Deterministic, Nanoscale Fabrication of Mesoscale Objects

Description: Neither LLNL nor any other organization has the capability to perform deterministic fabrication of mm-sized objects with arbitrary, {micro}m-sized, 3-D features and with 100-nm-scale accuracy and smoothness. This is particularly true for materials such as high explosives and low-density aerogels, as well as materials such as diamond and vanadium. The motivation for this project was to investigate the physics and chemistry that control the interactions of solid surfaces with laser beams and ion beams, with a view towards their applicability to the desired deterministic fabrication processes. As part of this LDRD project, one of our goals was to advance the state of the art for experimental work, but, in order to create ultimately a deterministic capability for such precision micromachining, another goal was to form a new modeling/simulation capability that could also extend the state of the art in this field. We have achieved both goals. In this project, we have, for the first time, combined a 1-D hydrocode (''HYADES'') with a 3-D molecular dynamics simulator (''MDCASK'') in our modeling studies. In FY02 and FY03, we investigated the ablation/surface-modification processes that occur on copper, gold, and nickel substrates with the use of sub-ps laser pulses. In FY04, we investigated laser ablation of carbon, including laser-enhanced chemical reaction on the carbon surface for both vitreous carbon and carbon aerogels. Both experimental and modeling results will be presented in the report that follows. The immediate impact of our investigation was a much better understanding of the chemical and physical processes that ensure when solid materials are exposed to femtosecond laser pulses. More broadly, we have better positioned LLNL to design a cluster tool for fabricating mesoscale objects utilizing laser pulses and ion-beams as well as more traditional machining/manufacturing techniques for applications such as components in NIF targets, remote sensors, including diagnostic systems, ...
Date: December 8, 2004
Creator: Jr., R M; Gilmer, J; Rubenchik, A & Shirk, M
Partner: UNT Libraries Government Documents Department

Fuel pellets and optical systems for inertially confined fusion

Description: Current laser-driven ICF targets are complex sets of concentric spherical shells made from a variety of materials including the fuel (e.g., deuterium-tritium), glass, beryllium, gold, polymeric materials, organo-metallics, and several additional organic and inorganic materials depending on the particular experiments to be done. While it is not yet known what the reactor targets will be exactly, there is little reason to believe they will be just simple, low quality glass shells containing DT gas or simple spheres of deuterated polyethylene or other fuel. Consequently, many of the current targets, materials, and fabrication techniques are considered to be applicable to the long range problems of ICF reactor target fabrication. Many current material problems and fabrication techniques are discussed and various quality factors are presented in an attempt to bring an awareness of the possible fusion reactor target materials problems to the scientific and technical community.
Date: May 8, 1979
Creator: Hendricks, C.D.
Partner: UNT Libraries Government Documents Department

Recent studies of short-range order in alloys: The Cowley theory revisited

Description: We present comparisons of various statistical theories for effective pair interactions (EPI) in alloys. We then evaluate these EPI`s using the Cowley theory, the Krivoglaz-Clapp-Moss (KCM) approximation, the {gamma}-expansion method (GEM) of Tokar, Masanskii and coworkers, and the exact inverse Monte Carlo (IMC) method, introduced by Gerold and Kern. Via a series of model calculations on a hypothetical bcc alloy with a single nearest-neighbor interaction we show that the Cowley theory is successful in evaluating the EPI`s in more dilute alloys but tends to overestimate the magnitude of the nearest neighbor energy at higher concentrations, whereas the KCM expression becomes increasingly inaccurate at lower concentrations. In general, however, the approximate mean field theories are most accurate at higher concentrations and higher temperatures. Recent studies of short-range order in single crystals are discussed in which these EPI`s have been evaluated using the IMC, KCM, GEM and Cowley theories. Examples include the bcc alloy Fe{sub 0.53}Cr{sub 0.47} and the fcc alloys Cu{sub 3} Au, CU{sub 0.69}Zn{sub 0.31} and Ni{sub 0.89}BgCr{sub 0.11}. In all cases the approximate expressions do quite well, especially the GEM.
Date: February 8, 1993
Creator: Reinhard, L. & Moss, S. C.
Partner: UNT Libraries Government Documents Department