179 Matching Results

Search Results

Advanced search parameters have been applied.

An investigation of aircraft heaters 15: the emissivity of several materials

Description: Report presenting a determination of the mean effective emissivity as a function of temperature for the surfaces of several metals and insulating materials. A description and discussion of the measuring technique is presented. The results are plotted on a variety of graphs.
Date: January 1944
Creator: Boelter, L. M. K.; Bromberg, R. & Gier, J. T.
Partner: UNT Libraries Government Documents Department

Extraordinary optical transmission through patterned subwavelength apertures.

Description: Light propagating through a subwavelength aperture can be dramatically increased by etching a grating in the metal around the hole. Moreover, light that would typically broadly diverge when passing through an unpatterned subwavelength hole can be directed into a narrow beam by utilizing a specific pattern around the aperture. While the increased transmission and narrowed angular emission appear to defy far-field diffraction theory, they are consistent with a fortuitous plasmon/photon coupling. In addition, the coupling between photons and surface plasmons affects the emissivity of a surface comprised of such structures. These properties are useful across several strategic areas of interest to Sandia. A controllable emission spectrum could benefit satellite and military application areas. Photolithography and near-field microscopy are natural applications for a system that controls light beyond the diffraction limit in a manner that is easily parallelizable. Over the one year of this LDRD, we have built or modified the numerical tools necessary to model such structures. These numerical codes and the knowledge base for using them appropriately will be available in the future for modeling work on surface plasmons or other optical modeling at Sandia. Using these tools, we have designed and optimized structures for various transmission or emission properties. We demonstrate the ability to design a metallic skin with an emissivity peak at a pre-determined wavelength in the spectrum. We optimize structures for maximum light transmission and show transmitted beams that beat the far-field diffraction limit.
Date: December 1, 2004
Creator: Kemme, Shanalyn A.; El-Kady, Ihab Fathy; Hadley, G. Ronald; Peters, David William & Lanes, Chris E.
Partner: UNT Libraries Government Documents Department

Absorption and emission properties of photonic crystals and metamaterials

Description: We study the emission and absorption properties of photonic crystals and metamaterials using Comsol Multiphysics and Ansoft HFSS as simulation tools. We calculate the emission properties of metallic designs using drude model and the results illustrate that an appropriate termination of the surface of the metallic structure can significantly increase the absorption and therefore the thermal emissivity. We investigate the spontaneous emission rate modifications that occur for emitters inside two-dimensional photonic crystals and find the isotropic and directional emissions with respect to different frequencies as we have expected.
Date: August 3, 2007
Creator: Peng, Lili
Partner: UNT Libraries Government Documents Department

Emittance of investment casting molds

Description: This document describes measurements of the directional spectral emittance of four ceramic mold materials. The work was performed with the samples at {approximately} 900{degree}C in a vacuum vessel pumped to {approximately}3 {times} 10{sup {minus}6}Torr. Results conform to expectations derived from prior work done with similar samples.
Date: July 15, 1994
Creator: Havstad, M. A.
Partner: UNT Libraries Government Documents Department

Determining the Emissivity of Roofing Samples: Asphalt, Ceramic and Coated Cedar

Description: The goal is to perform heat measurements examine of selected roofing material samples. Those roofing materials are asphalt shingles, ceramics, and cedar. It’s important to understand the concept of heat transfer, which consists of conduction, convection, and radiation. Research work was reviewed on different infrared devices to see which one would be suitable for conducting my experiment. In this experiment, the main focus was on a specific property of radiation. That property is the emissivity, which is the amount of heat a material is able to radiate compared to a blackbody. An infrared measuring device, such as the infrared camera was used to determine the emissivity of each sample by using a measurement formula consisting of certain equations. These equations account for the emissivity, transmittance of heat through the atmosphere and temperatures of the samples, atmosphere and background. The experiment verifies how reasonable the data is compared to values in the emissivity table. A blackbody method such as electrical black tape was applied to help generate the correct data. With this data obtained, the emissivity was examined to understand what factors and parameters affect this property of the materials. This experiment was conducted using a suitable heat source to heat up the material samples to high temperature. The measurements were taken during the experiment and displayed by the IR camera. The IR images show the behavior of surface temperatures being distributed throughout the different materials. The main challenge was to determine the most accurate emissivity values for all material samples. The results obtained by the IR camera were displayed in figures and tables at different distances, which was between the heap lamp and materials. The materials exhibited different behaviors in temperature and emissivity at certain distances. The emissivity of each material varied with different temperatures. The results led to suggestions ...
Date: December 2015
Creator: Adesanya, Oludamilola
Partner: UNT Libraries

Pyrometry simulator (pyrosim) for diagnostic design.

Description: Signal estimates are crucial to the design of time-resolved pyrometry measurements. These estimates affect fundamental design decisions, including the optical relay (fiber versus open beam), spectral range (visible or infrared), and amplification needs (possibly at the expense of time resolution). The pyrosim program makes such estimates, allowing the collected power, photon flux, and measured signal to be determined in a broad range of pyrometry measurements. Geometrical collection limits can be applied; sample emissivity, transfer efficiency, and detector sensitivity may also be specified, either as constants or functions of wavelength.
Date: October 1, 2011
Creator: Dolan, Daniel H., III
Partner: UNT Libraries Government Documents Department

Hydrodynamic and Spectral Simulations of HMXB Winds

Description: We describe preliminary results of a global model of the radiatively-driven photoionized wind and accretion flow of the high-mass X-ray binary Vela X-1. The full model combines FLASH hydrodynamic calculations, XSTAR photoionization calculations, HULLAC atomic data, and Monte Carlo radiation transport. We present maps of the density, temperature, velocity, and ionization parameter from a FLASH two-dimensional time-dependent simulation of Vela X-1, as well as maps of the emissivity distributions of the X-ray emission lines.
Date: March 30, 2007
Creator: Mauche, C W; Liedahl, D A; Akiyama, S & Plewa, T
Partner: UNT Libraries Government Documents Department

Sensitivity Analysis of the Thermal Response of 9975 Packaging Using Factorial Design Methods

Description: A method is presented for using the statistical design of experiment (2{sup k} Factorial Design) technique in the sensitivity analysis of the thermal response (temperature) of the 9975 radioactive material packaging where multiple thermal properties of the impact absorbing and fire insulating material Celotex and certain boundary conditions are subject to uncertainty. 2{sup k} Factorial Design method is very efficient in the use of available data and is capable of analyzing the impact of main variables (Factors) and their interactions on the component design. The 9975 design is based on detailed finite element (FE) analyses and extensive proof testing to meet the design requirements given in 10CFR71 [1]. However, the FE analyses use Celotex thermal properties that are based on published data and limited experiments. Celotex is an orthotropic material that is used in the home building industry. Its thermal properties are prone to variation due to manufacturing and fabrication processes, and due to long environmental exposure. This paper will evaluate the sensitivity of variations in thermal conductivity of the Celotex, convection coefficient at the drum surface, and drum emissivity (herein called Factors) on the thermal response of 9975 packaging under Normal Conditions of Transport (NCT). Application of this methodology will ascertain the robustness of the 9975 design and it can lead to more specific and useful understanding of the effects of various Factors on 9975 performance.
Date: October 31, 2005
Creator: Gupta, Narendra K.
Partner: UNT Libraries Government Documents Department

Systems and Methods for Integrated Emissivity and Temperature Measurement of a Surface

Description: A multi-channel spectrometer and a light source are used to measure both the emitted and the reflected light from a surface which is at an elevated temperature relative to its environment. In a first method, the temperature of the surface and emissivity in each wavelength is calculated from a knowledge of the spectrum and the measurement of the incident and reflected light. In the second method, the reflected light is measured from a reference surface having a known reflectivity and the same geometry as the surface of interest and the emitted and the reflected light are measured for the surface of interest. These measurements permit the computation of the emissivity in each channel of the spectrometer and the temperature of the surface of interest.
Date: November 8, 2005
Creator: Poulsen, Peter
Partner: UNT Libraries Government Documents Department

Temperature measurements of partially-melted tin as a function of shock pressure

Description: Equilibrium equation of state theory predicts that the free surface release temperature of shock loaded tin will show a plateau of 505 K in the pressure range from 19.5 to 33.0 GPa, corresponding to the solid-liquid mixed-phase region. In this paper we report free surface temperature measurements on shock-loaded tin from 15 to 31 GPa using multi-wavelength optical pyrometry. The shock waves were generated by direct contact of detonating high explosive with the sample. The pressure in the sample was determined by free surface velocity measurements using Photon Doppler Velocimetry. The emitted thermal radiance was measured at four wavelength bands in the near IR region from 1.5 to 5.0 {micro}m. The samples in most of the experiments had diamond-turned surface finishes, with a few samples being polished or ball rolled. At pressures higher than 25 GPa the measured free surface temperatures were higher than the predicted 505 K and increased with increasing pressure. This deviation could be explained by hot spots and/or variations in surface emissivity and requires a further investigation.
Date: January 1, 2009
Creator: Seifter, Achim; Furlanetto, Michael R; Holtkamp, David B; Obst, Andrew W; Payton, J R; Stone, J B et al.
Partner: UNT Libraries Government Documents Department

ELLIPSOMETRY IN THE STUDY OF DYNAMIC MATERIAL PROPERTIES

Description: Measurements of the time-dependent absolute temperature of surfaces shocked using high explosives (HE) provide valuable constraints on the equations-of-state (EOS) of materials and on the state of ejecta from those surfaces. In support of these dynamic surface temperature measurements, techniques for measuring the dynamic surface emissivity of shocked metals in the near infrared (IR) are being developed. These consist of time-dependent laser ellipsometric measurements, using several approaches. A discussion of these ellipsometric techniques is included here. Ellipsometry permits an accurate determination of the dynamic emissivity at a given wavelength, and may also provide a signature of melt in shocked metals.
Date: January 1, 2001
Creator: Obst, A. W. (Andrew W.); Alrick, K.R. (Keith R.); Boboridis, K.; Buttler, William T.; Lamoreaux, Steve Keith; Montgomery, S. L. (Stefanie L.) et al.
Partner: UNT Libraries Government Documents Department

Emissivity spectrum of a large "dark streak" from themis infrared imagery

Description: 'Dark streaks', also known as 'slope streaks', are unusual surface features found on Mars that are known to appear and fade away on timescales of years. Various explanations have been proposed for their origin and composition, including dry avalanches and wet debris or precipitates from brines. Previous investigations have been based on analysis of panchromatic imagery and altimetry from Viking and Mars Global Surveyor missions. We have obtained an infrared emissivity spectrum of a large dark streak on the north western edge of Olympus Mons, using imagery from the THEMIS instrument on the Mars Odyssey 2001 spacecraft.
Date: January 1, 2003
Creator: Brumby, Steven P.; Vaniman, D. T. (David T.) & Bish, D. L. (David L.)
Partner: UNT Libraries Government Documents Department

Nonuniform Liouville transformers for quasi-homogeneous optical fields. Final technical report, September 25, 1989--January 22, 1993

Description: During the last two decades, there have been dramatic improvements in the development of optical sources. Examples of this development range from semiconductor laser diodes to free electron beam lasers and synchrotron radiation. Before these developments, standards for the measurement of basic optical parameters (quantities) were less demanding. Now, however, there is a fundamental need for new, reliable methods for providing fast quantitative results for a very broad variety of optical systems and sources. This is particularly true for partially coherent optical beams, since all optical sources are either fully or partially spatially coherent (including Lambertian sources). Until now, there has been no satisfactory solution to this problem. During the last two decades, however, the foundations of physical radiometry have been developed by Walther, Wolf and co-workers. By integrating physical optics, statistical optics and conventional radiometry, this body of work provides necessary tools for the evaluation of radiometric quantities for partially coherent optical beams propagating through optical systems. In this program, Physical Optics Corporation (POC) demonstrated the viability of such a radiometric approach for the specific case of generalized energy concentrators called Liouville transformers. We believe that this radiometric approach is necessary to fully characterize any type of optical system since it takes into account the partial coherence of radiation. 90 refs., 57 figs., 4 tabs.
Date: March 1, 1993
Creator: Jannson, T.
Partner: UNT Libraries Government Documents Department

Using Multispectral Imaging to Measure Temperature Profiles and Emissivity of Large Thermionic Dispenser, Cathodes

Description: Thermionic dispenser cathodes are widely used in modern high-power microwave tubes. Use of these cathodes has led to significant improvement in performance. In recent years these cathodes have been used in electron linear accelerators (LINACs), particularly in induction LINACs, such as the Experimental Test Accelerator at Lawrence Livermore National Laboratory and the Relativistic Test Accelerator at Lawrence Berkeley National Laboratory. For induction LINACs, the thermionic dispenser cathode provides greater reproducibility, longer pulse lengths, and lower emittance beams than does a field emission cathode. Los Alamos National Laboratory is fabricating a dual-axis X-ray radiography machine called dual-axis radiograph hydrodynamic test (DARHT). The second axis of DARHT consists of a 2-kA, 20-MeV induction LINAC that uses a 3.2-MeV electron gun with a tungsten thermionic-dispenser cathode. Typically the DARHT cathode current density is 10 A/cm{sup 2} at 1050 C. Under these conditions current density is space-charge limited, which is desirable since current density is independent of temperature. At lower temperature (the temperature-limited regime) there are variations in the local current density due to a nonuniform temperature profile. To obtain the desired uniform current density associated with space-charge limited operation, the coolest area on the cathode must be at a sufficiently high temperature so that the emission is space-charge limited. Consequently, the rest of the cathode is emitting at the same space-charge-limited current density but is at a higher temperature than necessary. Because cathode lifetime is such a strong function of cathode temperature, there is a severe penalty for nonuniformity in the cathode temperature. For example, a temperature increase of 50 C means cathode lifetime will decrease by a factor of at least four. Therefore, we are motivated to measure the temperature profiles of our large-area cathodes.
Date: September 2001
Creator: Simmons, D. F.; Fortgang, C. M. & Holtkamp, D. B.
Partner: UNT Libraries Government Documents Department

MULTISCALE THERMAL-INFRARED MEASUREMENTS OF THE MAUNA LOA CALDERA, HAWAII

Description: Until recently, most thermal infrared measurements of natural scenes have been made at disparate scales, typically 10{sup {minus}3}-10{sup {minus}2} m (spectra) and 10{sup 2}-10{sup 3} m (satellite images), with occasional airborne images (10{sup 1} m) filling the gap. Temperature and emissivity fields are spatially heterogeneous over a similar range of scales, depending on scene composition. A common problem for the land surface, therefore, has been relating field spectral and temperature measurements to satellite data, yet in many cases this is necessary if satellite data are to be interpreted to yield meaningful information about the land surface. Recently, three new satellites with thermal imaging capability at the 10{sup 1}-10{sup 2} m scale have been launched: MTI, TERRA, and Landsat 7. MTI acquires multispectral images in the mid-infrared (3-5{micro}m) and longwave infrared (8-10{micro}m) with 20m resolution. ASTER and MODIS aboard TERRA acquire multispectral longwave images at 90m and 500-1000m, respectively, and MODIS also acquires multispectral mid-infrared images. Landsat 7 acquires broadband longwave images at 60m. As part of an experiment to validate the temperature and thermal emissivity values calculated from MTI and ASTER images, we have targeted the summit region of Mauna Loa for field characterization and near-simultaneous satellite imaging, both on daytime and nighttime overpasses, and compare the results to previously acquired 10{sup {minus}1} m airborne images, ground-level multispectral FLIR images, and the field spectra. Mauna Loa was chosen in large part because the 4x6km summit caldera, flooded with fresh basalt in 1984, appears to be spectrally homogeneous at scales between 10{sup {minus}1} and 10{sup 2} m, facilitating the comparison of sensed temperature. The validation results suggest that, with careful atmospheric compensation, it is possible to match ground measurements with measurements from space, and to use the Mauna Loa validation site for cross-comparison of thermal infrared sensors and temperature/emissivity extraction algorithms.
Date: March 1, 2001
Creator: BALICK, L.; GILLESPIE, A. & AL, ET
Partner: UNT Libraries Government Documents Department

RECIPES FOR WRITING ALGORITHMS FOR ATMOSPHERIC CORRECTIONS AND TEMPERATURE/EMISSIVITY SEPARATIONS IN THE THERMAL REGIME FOR A MULTI-SPECTRAL SENSOR

Description: This paper discusses the algorithms created for the Multi-spectral Thermal Imager (MTI) to retrieve temperatures and emissivities. Recipes to create the physics based water temperature retrieval, emissivity of water surfaces are described. A simple radiative transfer model for multi-spectral sensors is developed. A method to create look-up-tables and the criterion of finding the optimum water temperature are covered. Practical aspects such as conversion from band-averaged radiances to brightness temperatures and effects of variations in the spectral response on the atmospheric transmission are discussed. A recipe for a temperature/emissivity separation algorithm when water surfaces are present is given. Results of retrievals of skin water temperatures are compared with in-situ measurements of the bulk water temperature at two locations are shown.
Date: April 1, 2001
Creator: BOREL, C. & CLODIUS, W.
Partner: UNT Libraries Government Documents Department