448 Matching Results

Search Results

Advanced search parameters have been applied.

Heat Treatment and Machinability of Beryllium Rod

Description: Purpose: "The purpose of this investigation was to determine whether or not the machinability of extruded beryllium rod could be improved by appropriate heat treatment. It was thought that this could be accomplished in the extruded Be rod by recrystallization without further growth of these grains. This should impart a certain degree of ductility to the metal. The investigations was divided into two parts: Part I - Heat Treatment of Beryllium Rod; Part II - Machinability of Beryllium Rod."
Date: February 19, 1946
Creator: Norhaft, P. C.
Partner: UNT Libraries Government Documents Department

Synthesis and Characterization of Crystalline Assemblies of Functionalized Hydrogel Nanoparticles

Description: Two series monodispersed nanoparticles of hydroxylpropyl cellulose (HPC) and functionalized poly-N-isopropylamide (PNIPAM) particles have been synthesized and used as building blocks for creating three-dimensional networks, with two levels of structural hierarchy. The first level is HPC nanoparticles were made from methacrylated or degradable cross-linker attached HPC. These nanoparticles could be stabilized at room temperature by residual methacrylate or degradable groups are present both within and on the exterior of HPC nanoparticles. Controlled release studies have been performed on the particle and networks .The nearly monodispersed nanoparticles have been synthesized on the basis of a natural polymer of hydropropylcellulose (HPC) with a high molecular weight using the precipitation polymerization method and self-assembly of these particles in water results in bright colors. The HPC nanoparticles can be potential using as crosslinkers to increase the hydrogels mechanical properties, such as high transparency and rapid swelling/de-swelling kinetics. The central idea is to prepare colloidal particles containing C=C bonds and to use them as monomers - vinylparticles, to form stable particle assemblies with various architectures. This is accomplished by mixing an aqueous suspension of hydrogel nanoparticles (PNIPAM-co-allylamine) with the organic solvent (dichloromethane) to grow columnar crystals. The hydrogels with such a unique crystal structure behavior not only like the hydrogel opals, but also have a unique property: anisotropy.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: December 2005
Creator: Cai, Tong
Partner: UNT Libraries

Final Report

Description: OAK B135 The formation of metastable crystalline phases in lithium disilicate glass has been a subject of controversy for decades. Here, one aspect of this problem relating to the stability of these non-equilibrium phases when glasses are heated for extended time periods in the nucleation regime is addressed. The results of a systematic experimental investigation on the persistence of metastable phases and the factors that may influence the appearance of such phases, e.g., water content, impurities, glass composition, and glass preparation procedure are presented. Growth rates of lithium disilicate crystals in lithium disilicate glass are measured as a function water concentration in the glass and of temperature in the deeply undercooled regime. The growth rate data obtained in this work are combined with data reported in the literature and used to assess the applicability of standard models of crystal growth for the description of experimental results over a very broad temperature range. The reduced growth rate versus undercooling graph is found to consist of three regimes. For undercoolings less than 140°C, the reduced growth rate curve is suggestive of either 2-D surface nucleation or screw dislocation growth. For undercoolings greater than 400°C, the reduced growth rate plot suggests the operative crystal growth mechanism is 2-D surface nucleation, but detailed calculations cast doubt upon this conclusion. In the intermediate undercooling range, there appears to be some sort of transitional behavior for which none of the standard models appear to be applicable. Further, it is observed that small differences in the viscosity data employed can produce enormous differences in the predicted growth rates at larger undercoolings. Results of the kinetic analyses conducted herein seem to indicate that the nature of the kinetic rate coefficient used in the standard growth models may be incorrect. Nucleation rates of sodium metasilicate crystals in a sodium ...
Date: May 23, 2003
Creator: Weinberg, Michael C.; Burgner, Lori L. & Simmons, Joseph H.
Partner: UNT Libraries Government Documents Department

Timescales of spherulite crystallization in obsidian inferred from water concentration profiles

Description: We determined the kinetics of spherulite growth in obsidians from Krafla volcano, Iceland. We measured water concentration profiles around spherulites in obsidian by synchrotron Fourier transform infrared spectroscopy. The distribution of OH? groups surrounding spherulites decreases exponentially away from the spherulite-glass border, reflecting expulsion of water during crystallization of an anhydrous paragenesis (plagioclase + SiO2 + clinopyroxene + magnetite). This pattern is controlled by a balance between the growth rate of the spherulites and the diffusivity of hydrous solute in the rhyolitic melt. We modeled advective and diffusive transport of the water away from the growing spherulites by numerically solving the diffusion equation with a moving boundary. Numerical models fit the natural data best when a small amount of post-growth diffusion is incorporated in the model. Comparisons between models and data constrain the average spherulite growth rates for different temperatures and highlight size-dependent growth among a small population of spherulites.
Date: June 25, 2008
Creator: Castro, Jonathan M.; Beck, Pierre; Tuffen, Hugh; Nichols, Alexander R.L.; Dingwell, Donald B. & Martin, Michael C
Partner: UNT Libraries Government Documents Department

Crystallization of a member of the recFOR DNA repair pathway, RecO, with and without bound oligonucleotide

Description: RecFOR proteins are important for DNA repair by homologous recombination in bacteria. The RecO protein from Thermus thermophilus was cloned, purified and characterized for its binding to oligonucleotides. The protein was crystallized alone and in complex with a 14-mer oligonucleotide. Both crystal forms grow under different crystallization conditions in the same space group, P3121 or P3221, with almost identical unit cell parameters. Complete data sets were collected to 2.8 Angstrom and 2.5 Angstrom for RecO alone and the RecO-oligonucleotide complex, respectively. Visual comparison of the diffraction patterns between the two crystal forms and calculation of an Rmerge of 33.9 percent on F indicate that one of the crystal forms is indeed a complex of RecO with bound oligonucleotide.
Date: January 22, 2003
Creator: Aono, Shelly; Hartsch, Thomas & Schulze-Gahmen, Ursula
Partner: UNT Libraries Government Documents Department

Versatile assembly of p-carboxylatocalix[4]arene-O-alkyl ethers

Description: Crystallisation of lower-rim tetra-O-alkylated p-carboxylatocalix[4]arenes from pyridine results in the formation of both bi-layer and pillar type supramolecular motifs. Full alkylation at the calixarene lower rim has significant influence over the supramolecular self-assembly motif, including preclusion of pyridine guest molecules from the calixarene cavity in the solid state.
Date: July 8, 2009
Creator: Kennedy, Stuart; Teat, Simon J. & Dalgarno, Scott J.
Partner: UNT Libraries Government Documents Department

Morphological, rheological and electrochemical studies ofpoly(ethylene oxide) electrolytes containing fumed silicananoparticles

Description: In this paper, the rheology and crystallization of composite Poly(Ethylene Oxide) (PEO) electrolytes were studied by dynamic mechanical analysis, DSC and polarized light microscopy. The effects of fumed silica nanoparticles on the conductivities of the polymer electrolytes at temperatures above and below their melting point were measured and related to their rheology and crystallization behavior, respectively. The electrolyte/electrode interfacial properties and cycling performances of the composite polymer electrolytes in Li/Li cells are also discussed. The measured electrochemical properties were found to depend heavily on the operational environments and sample processing history.
Date: June 1, 2003
Creator: Xie, Jiangbing; Kerr, John B.; Duan, Robert G. & Han, Yongbong
Partner: UNT Libraries Government Documents Department

Molecular Dynamics Simulations of Spinodal-Assisted Polymer Crystallization

Description: Large scale molecular dynamics simulations of bulk melts of polar (poly(vinylidene fluoride) (pVDF)) polymers are utilized to study chain conformation and ordering prior to crystallization under cooling. While the late stages of polymer crystallization have been studied in great detail, recent theoretical and experimental evidence indicates that there are important phenomena occurring in the early stages of polymer crystallization that are not understood to the same degree. When the polymer melt is quenched from a temperature above the melting temperature to the crystallization temperature, crystallization does not occur instantaneously. This initial interval without crystalline order is characterized as an induction period. It has been thought of as a nucleation period in the classical theories of polymer crystallization, but recent experiments, computer simulations, and theoretical work suggest that the initial period in polymer crystallization is assisted by a spinodal decomposition type mechanism. In this study we have achieved physically realistic length scales to study early stages of polymer ordering, and show that spinodal-assisted ordering prior to crystallization is operative in polar polymers suggesting general applicability of this process.
Date: July 8, 2005
Creator: Gee, R H; Lacevic, N M & Fried, L
Partner: UNT Libraries Government Documents Department

THE IMPACT OF PARTIAL CRYSTALLIZATION ON THE PERMEATION PROPERTIES BULK AMORPHOUS GLASS HYDROGEN SEPARATION MEMBRANES

Description: It is recognized that hydrogen separation membranes are a key component of the emerging hydrogen economy. A potentially exciting material for membrane separations are bulk metallic glass materials due to their low cost, high elastic toughness and resistance to hydrogen 'embrittlement' as compared to crystalline Pd-based membrane systems. However, at elevated temperatures and extended operation times structural changes including partial crystallinity may appear in these amorphous metallic systems. A systematic evaluation of the impact of partial crystallinity/devitrification on the diffusion and solubility behavior in multi-component Metallic Glass materials would provide great insight into the potential of these materials for hydrogen applications. This study will report on the development of time and temperature crystallization mapping and their use for interpretation of 'in-situ' hydrogen permeation at elevated temperatures.
Date: November 25, 2008
Creator: Brinkman, K; Paul Korinko, P; Thad Adams, T; Elise Fox, E & Arthur Jurgensen, A
Partner: UNT Libraries Government Documents Department

Wear Resistant Amorphous and Nanocomposite Coatings

Description: Glass forming materials (critical cooling rate <10{sup 4}K.s{sup -1}) are promising for their high corrosion and wear resistance. During rapid cooling, the materials form an amorphous structure that transforms to nanocrystalline during a process of devitrification. High hardness (HV 1690) can be achieved through a controlled crystallization. Thermal spray process has been used to apply coatings, which preserves the amorphous/nanocomposite structure due to a high cooling rate of the feedstock particles during the impact on a substrate. Wear properties have been studied with respect to process conditions and feedstock material properties. Application specific properties such as sliding wear resistance have been correlated with laboratory tests based on instrumented indentation and scratch tests.
Date: March 26, 2008
Creator: Racek, O.
Partner: UNT Libraries Government Documents Department

MaterialsSemicrystallineCopolyamidesBased on the Renewable Monomer, 1,9-Nonane Diamine

Description: The conclusions of the presentation are: (1) Confirmed Isomorphism; (2) Reproduced Sigmoidal Relationship Between Melting Temperature and Composition; (3) Tg Increased with Increasing 9T Content; (4) Thermal Stability Increased with Increasing 9T Content; (5) Crystallization Rate Increased Dramatically at 9T Contents Above 50 Mole %; and (6) Copolymers Possessing a 9T Content Exceeding 50 Mole % 9T Possess Very Desirable Thermal Properties That Rival Nylon 6,6.
Date: December 16, 2010
Creator: Kugal, Alex; He, Jie; Bahr, James; Nasrullah, Mohammed & Chisholm, Bret
Partner: UNT Libraries Government Documents Department

Mesoscale Molecular Dynamics of Geomaterials: the Glass Transition, Long-Range Structure of Amorphous Silicates and Relation between Structure, Dynamics and Properties of geomaterials at elevated Temperature and Pressure

Description: Objectives: Our aims were (1) Large particle-number Molecular Dynamics (MD) simulations of molten silicate and aluminosilicate geomaterials (e.g., CaAl{sub 2}Si{sub 2}O{sub 8}, MgSiO{sub 3}, Mg{sub 2}SiO{sub 4}) with emphasis on understanding the connection between atomic structure and properties at temperatures and pressures characteristic of Earth's mantle (2) Study of the transport properties and equations of state for silicate liquids based on the MD results (3) Development of geochemical models for the evolution of crustal magma bodies undergoing simultaneous assimilation, fractional crystallization, periodic recharge and periodic eruption and application to magmatic systems (4) Study of current-day rates of generation and eruption of magma on earth.
Date: July 31, 2006
Creator: Spera, Frank
Partner: UNT Libraries Government Documents Department

Synthesis and study of crystalline hydrogels, guided by a phase diagram.

Description: Monodispersed nanoparticles of poly-N-isopropylacrylamide-co-allylamine (PNIPAM-co-allylamine) and PNIPAM-co-acrylic acid (AA) have been synthesized and used as building blocks for creating three-dimensional networks. The close-packed PNIPAM-co-allylamine and PNIPAM-co-AA nanoparticles were stabilized by covalently bonding neighboring particles at room temperature and at neutral pH; factors which make these networks amicable for drug loading and release. Controlled release studies have been performed on the networks using dextran markers of various molecular weights as model macromolecular drugs. Drug release was quantified under various physical conditions including a range of temperature and molecular weight. These nanoparticle networks have several advantages over the conventional bulk gels for controlling the release of biomolecules with large molecular weights. Monodispersed nanoparticles of poly-N-isopropylacrylamide-co-allylamine (PNIPAM-co-allylamine) can self-assemble into crystals with a lattice spacing on the order of the wavelength of visible light. By initiating the crystallization process near the colloidal crystal melting temperature, while subsequently bonding the PNIPAM-co-allylamine particles below the glass transition temperature, a nanostructured hydrogel has been created. The crystalline hydrogels exhibit iridescent patterns that are tunable by the change of temperature, pH value or even protein concentration. This kind of soft and wet hydrogel with periodic structures may lead to new sensors, devices, and displays operating in aqueous solutions, where most biological and biomedical systems reside. The volume-transition equilibrium and the interaction potential between neutral PINPAM particles dispersed in pure water were investigated by using static and dynamic light-scattering experiments. From the temperature-dependent size and energy parameters, the Sutherland-like potential provides a reasonable representation of the inter-particle potential for PNIPAM particles in swollen and in collapsed phases. An aqueous dispersion of PNIPAM particles can freeze at both high and low temperatures. At low temperatures, the freezing occurs at a large particle volume fraction, similar to that in a hard-sphere system; while at high temperature, the freezing occurs at ...
Date: December 2004
Creator: Huang, Gang
Partner: UNT Libraries

Vapor Phase Transport Synthesis of Zeolites from Sol-Gel Precursors

Description: A study of zeolite crystallization from sol-gel precursors using the vapor phase transport synthesis method has been performed. Zeolites (ZSM-5, ZSM-48, Zeolite P, and Sodalite) were crystallized by contacting vapor phase organic or organic-water mixtures with dried sodium silicate and dried sodium alumino-silicate gels. For each precursor gel, a ternary phase system of vapor phase organic reactant molecules was explored. The vapor phase reactant mixtures ranged from pure ethylene diamene, triethylamine, or water, to an equimolar mixture of each. In addition, a series of gels with varied physical and chemical properties were crystallized using the same vapor phase solvent mixture for each gel. The precursor gels and the crystalline products were analyzed via Scanning Electron Microscopy, Electron Dispersive Spectroscopy, X-ray mapping, X-ray powder diffraction, nitrogen surface area, Fourier Transform Infrared Spectroscopy, and thermal analyses. The product phase and purity as a function of the solvent mixture, precursor gel structure, and precursor gel chemistry is discussed.
Date: July 14, 2000
Creator: THOMA,STEVEN G. & NENOFF,TINA M.
Partner: UNT Libraries Government Documents Department

The Effects of Color Concentrate in Polyolefins.

Description: Throughout history consumer products were generally manufactured from wood and metal. They either had to hold their natural color or become subject to painting. When plastics entered the industry, it was recognized for its ease of shaping, re-usability, physical properties and its low cost. One of plastics' greatest benefits is its ability to hold a given color from within allowing it to avoid use of paint. This paper will give a brief overview on the effects of pigments when incorporated in a polyolefin. It will provide a classification of the main types of pigments and how each effect the properties of the product through: crystallization, weatherability, opacity, coloristic values and of course viscosity.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: December 2001
Creator: Flora, Paul
Partner: UNT Libraries

Porous networks derived from synthetic polymer-clay complexes

Description: Synthetic hectorites were hydrothermally crystallized with direct incorporation of a cationic polymer poly(dimethyl diallyl ammonium chloride) (PDDA), and two neutral cellulosic polymers hydroxypropyl methylcellulose (HPMC) and hydroxyethyl cellulose (HEC). Synthetic PDDA-hectorite displays the lowest d-spacing at 15.8 {Angstrom} along with less polymer incorporation (7.8 wt % organic) than the neutral polymers (18--22 wt % organic). Thermal analysis and small angle neutron scattering were used to further examine the polymer-clay systems. Clay platelets of the largest size and best stacking order occur when cationic PDDA polymer is used. PDDA also enhances these properties over the crystallites prepared for a control mineral, where no polymer is used. HEC acts to aggregate the silica, leaving less to react to form clay. The clay platelets which result from HEC are small, not stacked to a large degree, and oriented randomly. Neutral HPMC acts more like cationic PDDA in that larger clay platelets are allowed to form. The extended microstructure of the clay network remains undisturbed after polymer is removed by calcination. When no polymer is used, the synthetic hectorite has a N{sub 2} BET surface area of 200 M{sup 2}/gm, even after calcination. This increases by 20--50% for the synthetic polymer-hectorites after the polymer is removed by calcination.
Date: May 12, 1995
Creator: Carrado, K.A.; Thiyagarajan, P. & Elder, D.L.
Partner: UNT Libraries Government Documents Department

Crystallization In High Level Waste (HLW) Glass Melters: Operational Experience From The Savannah River Site

Description: processing strategy for the Hanford Tank Waste Treatment and Immobilization Plant (WTP). The basis of this alternative approach is an empirical model predicting the crystal accumulation in the WTP glass discharge riser and melter bottom as a function of glass composition, time, and temperature. When coupled with an associated operating limit (e.g., the maximum tolerable thickness of an accumulated layer of crystals), this model could then be integrated into the process control algorithms to formulate crystal tolerant high level waste (HLW) glasses targeting higher waste loadings while still meeting process related limits and melter lifetime expectancies. This report provides a review of the scaled melter testing that was completed in support of the Defense Waste Processing Facility (DWPF) melter. Testing with scaled melters provided the data to define the DWPF operating limits to avoid bulk (volume) crystallization in the un-agitated DWPF melter and provided the data to distinguish between spinels generated by K-3 refractory corrosion versus spinels that precipitated from the HLW glass melt pool. This report includes a review of the crystallization observed with the scaled melters and the full scale DWPF melters (DWPF Melter 1 and DWPF Melter 2). Examples of actual DWPF melter attainment with Melter 2 are given. The intent is to provide an overview of lessons learned, including some example data, that can be used to advance the development and implementation of an empirical model and operating limit for crystal accumulation for WTP. Operation of the first and second (current) DWPF melters has demonstrated that the strategy of using a liquidus temperature predictive model combined with a 100 °C offset from the normal melter operating temperature of 1150 °C (i.e., the predicted liquidus temperature (TL) of the glass must be 1050 °C or less) has been successful in preventing any detrimental accumulation of spinel in ...
Date: February 27, 2014
Creator: Fox, K. M.
Partner: UNT Libraries Government Documents Department

Final Report

Description: The purpose of this project was to investigate metal-induced crystallization of amorphous silicon at low temperatures using excitation sources such as laser and rapid thermal annealing, as well as, electric field. Deposition of high quality crystalline silicon at low temperatures allows the use of low cost soda-lime glass and polymeric films for economically viable photovoltaic solar cells and low cost large area flat panel displays. In light of current and expected demands on Si supply due to expanding use of consumer electronic products throughout the world and the incessant demand for electric power the need for developing high grade Si thin films on low cost substrate becomes even more important. We used hydrogenated and un-hydrogenated amorphous silicon deposited by plasma enhanced chemical vapor deposition and sputtering techniques (both of which are extensively used in electronic and solar cell industries) to fabricate nano-crystalline, poly-crystalline (small as well as large grain), and single-crystalline (epitaxial) films at low temperatures. We demonstrated Si nanowires on flat surfaces that can be used for fabricating nanometer scale transistors. We also demonstrated lateral crystallization using Al with and without an applied electric field. These results are critical for high mobility thin film transistors (TFT) for large area display applications. Large grain silicon (~30-50 µm grain size for < 0.5 µm thick films) was demonstrated on glass substrates at low temperatures. We also demonstrated epitaxial growth of silicon on (100) Si substrates at temperatures as low as 450˚C. Thin film Si solar cells are being projected as the material of choice for low cost high efficiency solar cells when properly coupled with excellent light-trapping schemes. Ar ion laser (CW) was shown to produce dendritic nanowire structures at low power whereas at higher powers yielded continuous polycrystalline films. The power density required for films in contact with Al was ...
Date: February 9, 2007
Creator: Hameed A. Naseem, Husam H. Abu-Safe
Partner: UNT Libraries Government Documents Department

Nitrogen effects on crystallization kinetics of amorphous TiOxNy thin films

Description: The crystallization behavior of amorphous TiOxNy (x&gt;&gt;y) thin films was investigated by in-situ transmission electron microscopy. The Johnson-Mehl-Avrami-Kozolog (JMAK) theory is used to determine the Avrami exponent, activation energy, and the phase velocity pre-exponent. Addition of nitrogen inhibits diffusion, increasing the nucleation temperature, while decreasing the growth activation energy. Kinetic variables extracted from individual crystallites are compared to JMAK analysis of the fraction transformed and a change of 6 percent in the activation energy gives agreement between the methods. From diffraction patterns and index of refraction the crystallized phase was found to be predominantly anatase.
Date: March 30, 2001
Creator: Hukari, Kyle; Dannenberg, Rand & Stach, E.A.
Partner: UNT Libraries Government Documents Department

Thin, High Lifetime Silicon Wafers with No Sawing; Re-crystallization in a Thin Film Capsule

Description: The project fits within the area of renewable energy called photovoltaics (PV), or the generation of electricity directly from sunlight using semiconductor devices. PV has the greatest potential of any renewable energy technology. The vast majority of photovoltaic modules are made on crystalline silicon wafers and these wafers accounts for the largest fraction of the cost of a photovoltaic module. Thus, a method of making high quality, low cost wafers would be extremely beneficial to the PV industry The industry standard technology creates wafers by casting an ingot and then sawing wafers from the ingot. Sawing rendered half of the highly refined silicon feedstock as un-reclaimable dust. Being a brittle material, the sawing is actually a type of grinding operation which is costly both in terms of capital equipment and in terms of consumables costs. The consumables costs associated with the wire sawing technology are particularly burdensome and include the cost of the wire itself (continuously fed, one time use), the abrasive particles, and, waste disposal. The goal of this project was to make wafers directly from molten silicon with no sawing required. The fundamental concept was to create a very low cost (but low quality) wafer of the desired shape and size and then to improve the quality of the wafer by a specialized thermal treatment (called re-crystallization). Others have attempted to create silicon sheet by recrystallization with varying degrees of success. Key among the difficulties encountered by others were: a) difficulty in maintaining the physical shape of the sheet during the recrystallization process and b) difficulty in maintaining the cleanliness of the sheet during recrystallization. Our method solved both of these challenges by encapsulating the preform wafer in a protective capsule prior to recrystallization (see below). The recrystallization method developed in this work was extremely effective at maintaining ...
Date: January 16, 2013
Creator: Buonassisi, Emanuel Sachs Tonio
Partner: UNT Libraries Government Documents Department

Influence of Radiation and Multivalent Cation Additions on Phase Separation and Crystallization of Glass

Description: This report presents results of: (1) measurement of valence state ratios of iron in glass, and (2) a study of the effect of iron redox ratio on phase separation behavior in a glass. The redox ratio of iron in two sodium silicate (NS) glasses has been determined using a colorimetric method, Moessbauer analysis, and optical absorption. The experimental procedures were described in a previous report. We found that these three methods gave excellent agreement for the values of the Fe++/Fe+++ (redox ratio) in the glasses. Also, using the results of the colorimetric analysis we were able to find the extinction coefficients for the18.56% NS and the 13% NS glasses. We have utilized the optical absorption data that was taken for purposes of determining redox ratios to provide glass structural information. In particular, it has been suggested that the band centered near 14,500 cm-1 is indicative of Fe2+ - O2- - Fe3+ formation. In addition, the relative band intensities at 10,000 cm-1 and 4,800 cm-1 could give us information as to the environment around the Fe2+ responsible for the 4,800 cm-1 band. The Moessbauer data will provide supporting structural information. For example, the relative number of clustered and free ferric ions can be computed from the ratio of areas under the doublet and sextet in the liquid He spectra. Also, the change in shift parameter with redox ratio will provide an indication of whether there is an increase or decrease in tetrahedral site symmetry about both ferrous and ferric ions. Finally, the quadrupole splitting parameter provides information regarding the site symmetries about the Fe++ and Fe+++. Currently, we are analyzing the spectral data for these purposes. The Moessbauer work was done in conjunction with colleagues at PNNL, and a manuscript is currently in preparation. The effect of oxidation state of iron ...
Date: August 9, 2002
Creator: Weinberg, Michael C.; Uhlmann, Donald R. & Smith, Gary L.
Partner: UNT Libraries Government Documents Department

HIGH-ENERGY COLLIDING CRYSTALS - A THEORETICAL STUDY

Description: Recent theoretical investigations of beam crystallization using computer modeling based on the method of molecular dynamics (MD) and analytical approach based on the phonon theory are motivated by the study of colliding crystalline beams [4]. Analytical study of crystal stability in an alternating-gradient (AG) focusing ring was previously limited to the smooth approximation. In a typical ring, results obtained under such approximation largely agrees with that obtained with the MD simulation. However, as we explore ring lattices appropriate for beam crystallization at high energies (Lorentz factor y much larger than the transverse tunes v,, vy) [5], this approximation fails. Here, we present a newly developed phonon theory in a time-dependent Hamiltonian system representing the actual AG-focusing ring and predict the stability of 1D crystals at high energies. Luminosity enhancement is illustrated in examples of rare-ion colliders based on ordered 1D strings of ions.
Date: September 10, 2007
Creator: WEI,J.
Partner: UNT Libraries Government Documents Department